H-point standard addition method applied to solid-state stripping voltammetry: quantitation of lead and tin in archaeological glazes

A solid-state electrochemical application of the H-point standard addition method to the quantification of two depositable metals A and B, which produce strongly overlapped stripping peaks, is described. The method is based on the mechanical transference of mixtures of the solid sample plus a selected compound, of a reference depositable metal R, and of known amounts of a reference material containing A or B, to paraffin-impregnated graphite electrodes. After a reductive deposition step, voltammograms recorded for those modified electrodes immersed into a suitable electrolyte produce stripping peaks for the oxidation of all of the metals deposited. Measurement of the currents at selected potentials in overlapping peaks corresponding to the stripping of A and B permits the quantitation of these metals in the solid sample, while avoiding matrix effects. The method was applied to the simultaneous determination of Pb and Sn in archaeological glazes using PbCO₃ and SnO₂ as standards and ZnO as a reference material.      

H‐Point Standard Addition Method Applied to Voltammetry of Microparticles. Quantitation of Dyes in Pictorial Samples

A solid‐state electrochemical application of the H‐point standard addition method (HPSAM) for quantifying two electroactive compounds, A, B, that produce strongly overlapped voltammetric peaks is described. It is based on peak current measurement in square‐wave voltammograms recorded for solid samples containing a reference compound R, upon additions of a A‐ (or B‐) containing standard compound. The method allows to the determination of the mass fraction of A and B by applying the H‐point standard addition method to solid state voltammetry. The quotients between the currents measured at two selected potentials and the peak current of R vary linearly with the mass ratio of the added standard and the reference compound, thus providing an electrochemical method for determining the content of A and B in the sample avoiding matrix effects. The method is applied to the simultaneous determination of alizarin and purpurin in madder pigments and pictorial specimens using morin as a reference material.     

Film stripping voltammetry

Film stripping voltammetry is a new electrochemical analytical method consisting in concentrating the test substance in the form of a metal or a sparingly soluble compound on the electrode surface and subsequently recording the current for electrodissolution of the deposit. The method has been worked out for determination of metal ions, anions and variable valence ions, with sensitivities as low as 10(-9)M. As indicator electrodes, solid, usually graphite, electrodes and stationary mercury electrodes are used.     

Detection of As(III) via oxidation to As(V) using platinum nanoparticle modified glassy carbon electrodes: arsenic detection without interference from copper

The electrochemical detection of As(III) was investigated on a platinum nanoparticle modified glassy carbon electrode in 1 M aqueous HClO4. Platinum nanoparticle modified glassy carbon electrodes were prepared by potential cycling in 0.1 M aqueous KCl containing 1 mM K2PtCl6. In each potential cycle, the potential was held at + 0.5 V for 0.01 s and at -0.7 V for 10 s. 25 cycles were optimally used to prepare the electrodes. The resulting electrode surfaces were characterized with AFM. The response to arsenic(III) on the modified electrode was examined using cyclic voltammetry and linear sweep voltammetry. By using the As(III) oxidation peak for the analytical determination, there is no interference from Cu(II) if present in contrast to the other metal surfaces (especially gold) typically used for the detection of arsenic; Cu(II) precludes the use of the As(0) to As(III) peak for quantitative anodic stripping voltammetry measurements due to the formation of Cu3As2 and an overlapping interference peak from the stripping of Cu(0). After optimization, a LOD of 2.1 +/- 0.05 ppb was obtained using the direct oxidation of As(III) to As(V), while the World Health Organization's guideline value of arsenic for drinking water is 10 ppb, suggesting the method may have practical utility.     

Determination of pesticides using heteropolyacid montmorillonite clay-modified electrode with surfactant

Redox behavior of three pesticides, namely isoproturon, carbendazim and methyl parathion was investigated electrochemically using hetropolyacid montmorillonite clay-modified glassy carbon electrode in the presence and absence of a surfactant, cetyl trimethyl ammonium bromide. A solution of 0.1 M H₂SO₄ in 50% aqueous alcohol (pH 1.0) was found to be suitable medium for electroanalysis. Isoproturon exhibited one well-defined oxidation peak around 1.2 V along with one more oxidation and reduction peaks. Carbendazim showed only one well-defined anodic peak around 1.4 V. Methyl parathion exhibited one well-defined reduction peak around −0.26 V and the oxidation peak appeared around 0.510 V. In the second cycle, a new cathodic peak was found around 0.420 V. The presence of surfactant enhanced the peak current and hence stripping voltammetric determination procedures for all the three pesticides were developed. Square wave stripping mode was employed and the maximum current experimental conditions were arrived at. Calibration plot was made for all the three pesticides. The determination limit and standard deviations were arrived at. The applicability of the method was also verified in a soil sample and water analyte.     

Stripping voltammetry with the electrode material acting as a ‘built-in' internal standard

The oxidation peak of the bismuth layer of bismuth-film electrodes is used as an internal standard in anodic stripping voltammetry. Such use of the electrode material as a ‘built-in' internal standard simplifies the analytical protocol (as it obviates the need for an external standard or long calibration and standard additions procedures) while correcting for run-to-run variations due to uncertainties (e.g., changes in mass transport, surface area, or other variables). The new internal standard strategy relies on common in situ plated film electrodes, where the deposition of both the analyte and electrode material is subject to the same variations. Such one-step quantitation and improvements are illustrated for trace measurements of lead. The use of the intrinsic signal of the system for obtaining the concentration of the target analyte is unique not only for electroanalysis, but for analytical chemistry in general.     

Electrochemical Behavior of Carvedilol and Its Adsorptive Stripping Determination in Dosage Forms and Biological Fluids

Carvedilol is used in the management of hypertension and angina pectoris and as an adjunct to standard therapy in symptomatic heart failure. The electrochemical oxidation of carvedilol was investigated using cyclic, linear sweep voltammetry at a glassy carbon electrode. In cyclic voltammetry, in all values of pH, the compound shows two irreversible oxidation peaks. These two peaks are related to the different electroactive part of the molecule. First and second peak currents were found as diffusion and adsorption controlled, respectively. Using second oxidation step, two voltammetric methods were described for the determination of carvedilol by differential pulse adsorptive stripping voltammetry (AdSDPV) and square‐wave adsorptive stripping voltammetry (AdSSWV) at a glassy carbon electrode. Accumulation of carvedilol was found to be optimized in 0.2 M H₂SO₄ solution following 275 second accumulation time at open circuit condition. Under optimized conditions, the current showed a linear dependence with concentration in the range between 2×10^?7 M and 2×10^?5 M in supporting electrolyte and in the range between 2×10^?7 M and 1×10^?5 M in spiked human serum samples for both methods. These methods were successfully applied for the analysis of carvedilol pharmaceutical dosage forms and spiked human serum samples. The repeatability and reproducibility of the methods for all media were determined. Precision and accuracy were also found. No electroactive interferences from the tablet excipients and endogenous substances from biological material were found.     

Determination of levofloxacin in human urine by adsorptive square-wave anodic stripping voltammetry on a glassy carbon electrode

The adsorption behavior of levofloxacin on a glassy carbon electrode was explored by cyclic and square-wave voltammetry. The drug was accumulated on a glassy carbon electrode and a well-defined oxidation peak was obtained in acetate buffer pH 5.0. Using square-wave anodic stripping voltammetry and accumulation at +0.4 V versus Ag/AgCl (saturated KCl) for 300 s, linear calibration graph was obtained from 6.0x10(-9) to 5.0x10(-7) M levofloxacin. The detection limit was calculated to be 5.0x10(-9) M. The R.S.D. determined from ten determinations at the 1.0x10(-7) M level was 1.7%. The method was applied for the direct determination of levofloxacin in diluted urine samples. It was validated using high-performance liquid chromatography (HPLC) as a reference method.     

Determination of Ammonium by Stripping Voltammetry

The behavior of ammonium ions at amalgam electrodes was studied by cyclic and stripping voltammetry. It was found that the oxidation peak of an ammonium hydride amalgam can be used as the analytical signal. Conditions were selected for the determination of ammonium ions in aqueous solutions at a mercury film electrode by stripping voltammetry using potassium chloride as the supporting electrolyte. The determination limit for ammonium ions was found to be 2 × 10^–7M (0.004 mg/L). The procedure was tested in river waters of the Ob' basin and in the atmospheric air.     

Microwave-enhanced electro-deposition and stripping of palladium at boron-doped diamond electrodes

In situ microwave activation has been applied to the electro-deposition and stripping of palladium metal (which is widely used as a catalyst) at cavitation resistant boron-doped diamond electrodes. Focused microwave radiation leading to heating, boiling, and cavitation is explored as an option to improve the speed and sensitivity of the analytical detection procedure. The deposition and anodic stripping of palladium by linear sweep voltammetry in 0.1 M KCl (pH 2) solution and at boron-doped diamond electrodes is shown to be strongly enhanced by microwave activation due to both (i) the increase in mass transport and (ii) the increase in the kinetic rate of deposition and stripping.The temperature at the electrode surface is calibrated with the reversible redox couple Fe(CN)₆⁴⁻/Fe(CN)₆³⁻ and found to be reach 380 K. In the presence of microwave radiation, the potential of onset of the deposition of palladium is strongly shifted positive from −0.4 to +0.1 V versus SCE. The optimum potential for deposition in the presence of microwaves is −0.4 V versus SCE and the anodic stripping peak current is shown to increase linearly with deposition time. Under these conditions, the stripping peak current varies linearly with the palladium concentration down to ca. 2 μM. At concentration lower than this a logarithmic variation of the stripping peak current with concentration is observed down to ca. 0.1 μM (for 5 min pre-concentration in presence of microwave radiation).     

Heavy Metals in Matrices of Food Interest: Sequential Voltammetric Determination at Trace and Ultratrace Level of Copper,Lead, Cadmium,Zinc, Arsenic,Selenium, Manganese and Iron in Meals

The voltammetric methods are very suitable and versatile techniques for the simultaneous metal determination in complex matrices. The present work, regarding the sequential determination of Cu(II), Pb(II), Cd(II), Zn(II) by square‐wave anodic stripping voltammetry (SWASV), As(III), Se(IV) by square‐wave cathodic stripping voltammetry (SWCSV) and Mn(II), Fe(III) by square‐wave voltammetry (SWV) in matrices involved in foods and food chain as wholemeal, wheat and maize meal, are an interesting example of the possibility to sequentially determine each single element in real samples. Besides the set up of the analytical method, particular attention is aimed either at the problem of possible signal interference or to show that, using the peak area A_p as instrumental datum, it is possible to achieve lower limits of detection. The analytical procedure was verified by the analysis of the standard reference materials: Wholemeal BCR‐CRM 189, Wheat Flour NIST‐SRM 1567a and Rice Flour NIST‐SRM 1568a. Precision, as repeatability, and accuracy, expressed as relative standard deviation and relative error, respectively, were lower than 6% in all cases. In the presence of reciprocal interference, the standard addition method considerably improved the resolution of the voltammetric technique. Once set up on the standard reference materials, the analytical procedure was transferred and applied to commercial meals sampled on market for sale. A critical comparison with spectroscopic measurements is also discussed.     

Determination of very low/levels of selenium(IV) in sea water by differential-pulse cathodic stripping voltammetry after extraction of the 3,3′-diaminobenzidine piazselenol

Selenium(IV) is determined by cathodic stripping voltammetry after the formation of a piazselenol with 3,3′-diaminobenzidine. The selenium is then accumulated as HgSe on a mercury electrode by deposition at ?0.45 V. The differential-pulse cathodic stripping peak allows a detection limit of 0.01 μg l^?1. For the determination of selenium in natural waters, interferences can be avoided by extraction of the piazselenol into toluene followed by a back-extraction into 0.5 M hydrochloric acid. The accuracy of the overall procedure was checked by analyses of a standard reference material. The method was applied to the determination of selenium(IV) in sea-water samples at levels as low as 20 ng l^?1 with a concentration factor of 10 during the extraction procedure.     

Electrodeposition and stripping voltammetry of arsenic(III) and arsenic(V) on a carbon black–polyethylene composite electrode in the presence of iron ions

In this work, a new sensor is proposed for the stripping voltammetric determination (anodic stripping voltammetry—ASV) of total arsenic(V) or arsenic(III). The sensor is based on an Fe-modified carbon composite electrode containing 30 % carbon black–high-pressure polyethylene (CB/PE). The modification with iron is achieved by the addition of Fe(III) or Fe(II) ions to the sample solution and co-electrodeposition of iron and arsenic on the CB/PE electrode. In anodic stripping voltammetry, two peaks are observed: an Fe peak at ?0.45 or ?0.29 V and a peak at 0.12?±?0.07 V which depends on the arsenic concentration and corresponds to the As(0) → As(III) oxidation, as is the case with other solid electrodes. The optimum conditions proposed for ASV determination of As(V) and As(III) in solutions in the presence of dissolved oxygen are the following: the background electrolyte is 0.005 M HCl containing 0.5–1 mg/?L Fe(III) for As(V) and containing 1.0–1.5 mg/?L Fe(III) for As(III), respectively; E _dep?=??2.3 V; rest period at ?0.10 V for 3–5 s before the potential sweep from ?0.2 to +0.4 V; scan rate is 120 mV/?s. The detection limit (LOD, t?=?120 s) for As(III) and As(V) is 0.16 and 0.8 μg/?L, respectively. Various hypotheses on the effect of Fe ions and atoms on the electrodeposition and dissolution of arsenic are considered. The new method of determination of As(III) and As(V) differs from known analogues by its simplicity, low cost, and easy accessibility of the electrode material. It allows the voltammetric determination of total arsenic after chemical reduction of all its forms to As(III) or after their oxidation to As(V).     

Development of a voltammetric procedure for assay of thebaine at a multi-walled carbon nanotubes electrode: quantification and electrochemical studies

The study of electrochemical behavior and determination of thebaine (THEB), an opiate alkaloid, is described on a multi-walled carbon nanotube (MWCNT) modified glassy carbon electrode by adsorptive stripping voltammetry and electrochemical impedance spectroscopy. The results indicated that MWCNT electrodes remarkably enhance electrocatalytic activity toward the oxidation of THEB in a wide pH range of 2.0–10.0, and it shows two irreversible and diffusion-controlled anodic peaks. Then, a sensitive, simple, and time-saving cyclic voltammetric procedure was developed for the analysis of THEB in human urine samples. Under optimized conditions, the oxidation peak has two linear dynamic ranges of 1.0–80.0 and 100.0–600.0 μM, with detection limit of 0.23 μM and a precision of <4% (relative standard deviation for eight analysis).     

Square Wave Adsorptive Stripping Voltammetric Determination of Cyromazine Insecticide with Multi-Walled Carbon Nanotube Paste Electrode

The electrochemical behavior of cyromazine (N-cyclopropyl-1,3,5-triazine-2,4,6 triamine) insecticide has been studied at newly prepared multi-wall carbon nanotubes paste electrodes using square wave stripping voltammetry. The cyromazine was accumulated at 0.0 mV [vs. Ag/AgCl (3 M NaCl)] and a well-defined anodic peak obtained at +1110 mV in 0.1 M H₂SO₄. The cyclic voltammetric measurements showed an irreversible nature of oxidation wave in the range of scan rates comprised between 500 and 4000 mV s^?1. The calibration curve obtained from square wave stripping voltammetry was linear in the range 0.41 to 83.30 µg/mL with a detection limit of 0.12 µg/mL. The method was applied to the direct determination of cyromazine in natural water samples. Recoveries calculated for river and tap water samples spiked with 10.0 µg/mL level were 101.5 ± 1.9% and 100.6 ± 2.3% at 95% confidence level, respectively. The method was extended to the determination of cyromazine in agrochemical formulation Trigard® with a recovery of 100.49% and accuracy was in agreement with that obtained by HPLC comparison method. Influences of some interfering ions and pesticides were also investigated.     

Selective and non-selective determination of heavy metal ions in flowing solutions by fast stripping cyclic voltammetry.

A simple and fast stripping voltammetric detection method has been designed for selective and non-selective measurements of heavy metal ions in a flow-injection system. A special computer numerical method is introduced for calculating the analyte signal and noise reduction, where the signal is calculated based on the partial and total charge exchange at electrode surface. For a selective determination, the currents are integrated in the range of the oxidation and reduction of the analyte. For non-selective measurements, the integration range is set for the whole potential scan range (including oxidation and reduction of the Au surface). The time for stripping has been shown to be less than 300 ms. The main advantages of the detection method are as follows: first, removal of oxygen from the measured solution is not required; second, it is sufficiently fast for the determination of heavy metal ions in various chromatographic analysis methods. The limit of detection for tested ions was between 3 x 10(-9) and 6 x 10(-10) M, and the relative standard deviation at 50 ppb Pb2+ was 4.7% for 10 runs.     

Electrochemical evaluation and determination of antiretroviral drug fosamprenavir using boron-doped diamond and glassy carbon electrodes

Fosamprenavir is a pro-drug of the antiretroviral protease inhibitor amprenavir and is oxidizable at solid electrodes. The anodic oxidation behavior of fosamprenavir was investigated using cyclic and linear sweep voltammetry at boron-doped diamond and glassy carbon electrodes. In cyclic voltammetry, depending on pH values, fosamprenavir showed one sharp irreversible oxidation peak or wave depending on the working electrode. The mechanism of the oxidation process was discussed. The voltammetric study of some model compounds allowed elucidation of the possible oxidation mechanism of fosamprenavir. The aim of this study was to determine fosamprenavir levels in pharmaceutical formulations and biological samples by means of electrochemical methods. Using the sharp oxidation response, two voltammetric methods were described for the determination of fosamprenavir by differential pulse and square-wave voltammetry at the boron-doped diamond and glassy carbon electrodes. These two voltammetric techniques are 0.1 M H₂SO₄ and phosphate buffer at pH 2.0 which allow quantitation over a 4 × 10⁻⁶ to 8 × 10⁻⁵ M range using boron-doped diamond and a 1 × 10⁻⁵ to 1 × 10⁻⁴ M range using glassy carbon electrodes, respectively, in supporting electrolyte. All necessary validation parameters were investigated and calculated. These methods were successfully applied for the analysis of fosamprenavir pharmaceutical dosage forms, human serum and urine samples. The standard addition method was used in biological media using boron-doped diamond electrode. No electroactive interferences from the tablet excipients or endogenous substances from biological material were found. The results were statistically compared with those obtained through an established HPLC-UV technique; no significant differences were found between the voltammetric and HPLC methods.     

Trace determination of zirconium by adsorptive anodic stripping voltammetry of its complex with alizarin violet using a glassy carbon electrode modified with acetylene black-dihexadecyl hydrogen phosphate composite film

We report on a novel electrochemical method for the sensitive determination of trace zirconium (Zr) at a glassy carbon electrode modified with a film of acetylene black containing dihexadecyl hydrogen phosphate and in the presence of alizarin violet (AV). The method is based on the preconcentration of the Zr(IV)-AV complex at a potential of ?200?mV (vs. SCE). The adsorbed complex is then oxidized, producing a response with a peak potential of 526?mV. Compared to the poor electrochemical signal at the unmodified GCE, the electrochemical response of Zr(IV)-AV complex is greatly improved, as confirmed by the significant increase in peak current. The effects of experimental conditions on the oxidation current were studied and a calibration plot established. The oxidation current is linearly related to the Zr(IV) concentration in the 8.0?pM to 10?nM concentration range (c_AV?=?0.2???M) and 10?nM ~0.6???M (c_AV?=?2.0???M), and the detection limit (S/N?=?3) is as low as 4.0?pM for a 3-min accumulation time. The method was successfully employed to the determination of zirconium in standard ore samples.

Contribution of migration current to the voltammetric deposition and stripping of lead with and without added supporting electrolyte at a mercury-free carbon fibre microdisc electrode

In order to assess the contribution and analytical significance of migration, electrochemical studies on the deposition and stripping of lead at a carbon fibre microelectrode (diameter of 10 μm) have been undertaken in aqueous solutions containing 1 mM lead ions with variable KNO₃ supporting electrolyte concentrations (10⁻¹ to 10⁻⁵ M), as well as in the total absence of deliberately added supporting electrolyte. The methodology involved the application of cyclic voltammetry to characterise the Pb²⁺ (solution)+2e⁻Pb (metal) process in both the reduction (Pb deposition) and stripping (Pb dissolution) directions. The use of a mercury-free carbon surfaces means that the lead stripping does not occur from the amalgam state, as is commonly the case in anodic stripping voltammetry. In the deposition step, the current rises sharply with potential in response to a lead nucleation-growth process and then reaches an almost potential independent limiting value. The stripping step, obtained on the reverse scan, exhibited oxidation peak currents resulting from the redissolution or stripping of the metal from the electrode surface. The influence of the electrolyte concentration and hence migration current at −0.8 V versus Ag/AgCl for the deposition process, as well on the redissolution peak current and the dependence of the voltammograms on scan rate (10–1000 mV) are discussed. Interestingly, neither deposition limiting nor stripping peak currents vary in a simple manner with added supporting electrolyte concentrations, with maximum values being observed at 10⁻⁵ M rather than zero concentration of added KNO₃. An important implication for the voltammetric determination of lead in low ionic strength media by the very sensitive technique of anodic stripping voltammetry is that use of the method of standard additions commonly employed to minimise unknown matrix problems, is prone to error when contributions to the process from migration current are important.     

Anodic stripping voltammetry and chronopotentiometry of copper at a rotating carbosital disk electrode

The use of a new carbon material — carbosital — for electrodes is reviewed. The behaviour of copper deposited on the carbosital electrode surface in anodic stripping voltammetry and chronopotentiometry is discussed. In anodic stripping voltammetry with a rotating carbosital disk electrode, the peak current and the number of coulombs involved in stripping copper are directly proportional to the square root of the electrode rotation rate during preelectroiysis; the peak current is directly proportional to the potential scan rate during stripping. For anodic stripping voltammetry and anodic stripping chronopotentiometry, linear calibration graphs are obtained in the range 1 X 10^-3–1 x 10^-6 M copper(II). The method is applicable to analysis of high-purity cadmium for copper.