Dihydrogen complexes of rhodium: [RhH2(H2)x (PR3)2]+ (R = Cy, iPr; x = 1, 2)

Addition of H2 (4 atm at 298 K) to [Rh(nbd)(PR3)2][BAr(F)4] [R = Cy, iPr] affords Rh(III) dihydride/dihydrogen complexes. For R = Cy, complex 1a results, which has been shown by low-temperature NMR experiments to be the bis-dihydrogen/bis-hydride complex [Rh(H)2(eta2-H2)2(PCy3)2][BAr(F)4]. An X-ray diffraction study on 1a confirmed the {Rh(PCy3)2} core structure, but due to a poor data set, the hydrogen ligands were not located. DFT calculations at the B3LYP/DZVP level support the formulation as a Rh(III) dihydride/dihydrogen complex with cis hydride ligands. For R = iPr, the equivalent species, [Rh(H)2(eta2-H2)2(P iPr3)2][BAr(F)4] 2a, is formed, along with another complex that was spectroscopically identified as the mono-dihydrogen, bis-hydride solvent complex [Rh(H)2(eta2-H2)(CD2Cl2)(P iPr3)2][BAr(F)4] 2b. The analogous complex with PCy3 ligands, [Rh(H)2(eta2-H2)(CD2Cl2)(PCy3)2][BAr(F)4] 1b, can be observed by reducing the H2 pressure to 2 atm (at 298 K). Under vacuum, the dihydrogen ligands are lost in these complexes to form the spectroscopically characterized species, tentatively identified as the bis hydrides [Rh(H)2(L)2(PR3)2][BAr(F)4] (1c R = Cy; 2c R = iPr; L = CD2Cl2 or agostic interaction). Exposure of 1c or 2c to a H2 atmosphere regenerates the dihydrogen/bis-hydride complexes, while adding acetonitrile affords the bis-hydride MeCN adduct complexes [Rh(H)2(NCMe)2(PR3)2][BAr(F)4]. The dihydrogen complexes lose [HPR3][BAr(F)4] at or just above ambient temperature, suggested to be by heterolytic splitting of coordinated H2, to ultimately afford the dicationic cluster compounds of the type [Rh6(PR3)6(mu-H)12][BAr(F)4]2 in moderate yield.     

Insertion of the Ga(I) bis-imidinate Ga(DDP) into the metal halogen bonds of Rh(I) complexes. How electrophilic are coordinated Ga(DDP) fragments?

The reactivity of Ga(DDP) (DDP = 2-((2,6-diisopropylphenyl)amino-4-((2,6-diisopropylphenyl)imino)-2-pentene) towards the rhodium-chloride bonds of [RhCl(PPh3)3] and [RhCl(COE)2]2 (COE = cyclooctene) is investigated. Reaction of the first complex leads to [(Ph3P)2Rh{Ga(DDP)}(mu-Cl)] (1), exhibiting a chloride bridging the gallium and the rhodium atoms, whereas the second complex leads to a full insertion of the Ga(DDP) ligand into the Rh-Cl bond giving [(COE)(benzene)Rh{(DDP)GaCl}] (2) on coordination of the solvent C6H6. Compounds 1 und 2 readily react with the halide abstracting reagent Tl[BArF] (BArF = B[3,5-(CF3)2C6H3]4), yet the products could not be isolated and characterized because of their lability. The Au(I) complex [{(DDP)Ga}Au{Ga(DDP)}Cl] reacts with Na[BArF] giving the linear, symmetric cationic complex [{(DDP)Ga.THF}2Au][BArF] (3.2THF), exhibiting two THF molecules coordinated to the Ga(DDP) moieties.     

Reactions of hypersilyl potassium with rare-earth metal bis(trimethylsilylamides): addition versus peripheral deprotonation

The scope of hypersilyl potassium, KHyp [Hyp = Si(SiMe3)3], as a silylation or deprotonation agent for some rare-earth bis(trimethylsilyl)amides has been explored. Thus, the reaction with Yb{N(SiMe3)2}2 affords the addition product [K][YbHyp{N(SiMe3)2}2] (2) in high yield, which contains a three-coordinate ytterbium atom, therefore representing the first example of a lanthanide silyl with a coordination number lower than 6. In contrast, deprotonation on the periphery is observed with the tris(amides) Ln{N(SiMe3)2}3 (Ln = Y, Yb) and compounds of the type [K][CH2Si(Me)2N(SiMe3)Ln{N(SiMe3)2}2] (Ln = Y (3), Yb (4)) are isolated. Crystallization of 3 from a mixture of benzene and heptane afforded the bis(benzene) solvate [(C6H6)2K][CH2Si(Me)2N(SiMe3)Y{N(SiMe3)2}2] (3a). The reaction between the strong bases nBuLi/tetramethylenediamine (TMEDA) or tBuLi with Y{N(SiMe3)2}3 or Yb{N(SiMe3)2}3 yielded the deprotonation product [(tmeda)Li][CH2Si(Me)2N(SiMe3)Y{N(SiMe3)2}2] (6) and the reduction product [LiYb{N(SiMe3)2}3] (7), respectively. Instead of the expected bimetallic product, the reaction between YbI(2) and 2 equiv of 3 gave the neutral complex [Y{CH2Si(Me)2N(SiMe3)}{N(SiMe3)2}(thf)] (8) in good yield. The compounds have been characterized by melting point, elemental analysis, IR spectroscopy, and X-ray crystallography and for selected species by 1H, 13C, 29Si, and 171Yb NMR spectroscopy. For 3a and 4, the nature of the bonding between the carbanionic centers and the lanthanide and potassium cations was studied by density functional theory calculations.     

Preparation, characterization, and structural systematics of diphosphane and diarsane complexes of gallium(III) halides

The diphosphane o-C6H4(PMe2)2 reacts with GaX3 (X = Cl, Br, or I) in a 1:1 molar ratio in dry toluene to give trans-[GaX2{o-C6H4(PMe2)2}2][GaX4], the cations of which contain the first examples of six-coordinate gallium in a phosphane complex. The use of a 1:2 ligand/GaCl3 ratio produced [GaCl2{o-C6H4(PMe2)2}][GaCl4], containing a pseudotetrahedral cation, and similar pseudotetrahedral [GaX2{o-C6H4(PPh2)2}][GaX4] complexes are the only products isolated with the bulkier o-C6H4(PPh2)2. On the other hand, Et2P(CH2)2PEt2, which has a flexible aliphatic backbone, formed [(X3Ga)2{mu-Et2P(CH2)2PEt2}], in which the ligand bridges two pseudotetrahedral gallium centers. The diarsane, o-C6H4(AsMe2)2, formed [GaX2{o-C6H4(AsMe2)2}][GaX4], also containing pseudotetrahedral cations, and in marked contrast to the diphosphane analogue, no six-coordinate complexes form; a very rare example where these two much studied ligands behave differently towards a common metal acceptor. The complexes [(I3Ga)2{mu-Ph2As(CH2)2AsPh2}] and [GaX3(AsMe3)] are also described. The X-ray structures of trans-[GaX2{o-C6H4(PMe2)2}2][GaX4] (X = Cl, Br or I), [GaCl2{o-C6H4(PPh2)2}][GaCl4], [GaX2{o-C6H4(AsMe2)2}][GaX4] (X = Cl or I), [(I3Ga)2{mu-Ph2As(CH2)2AsPh2}], and [GaX3(AsMe3)] (X = Cl, Br or I) are reported, and the structural trends are discussed. The solution behavior of the complexes has been explored using a combination of 31P{1H} and 71Ga NMR spectroscopy.     

Heterobimetallic, cubane-like Mo(3)S(4)M' cluster cores containing the noble metals M' = Ru, Os, Rh, Ir. Unprecedented tri(mu-carbonyl) bridge between ruthenium atoms in [(eta(5)-Cp')(3)Mo(3)S(4)Ru)2(mu-CO)3]2+

Reaction of the methylcyclopentadienyl (Cp') cluster compound [(eta(5)-Cp')(3)Mo(3)S(4)][pts] (pts = p-toluenesulfonate) with noble metal alkene complexes resulted in the formation of four new heterobimetallic cubane-like Mo(3)S(4)M' cluster cores (M' = Ru, Os, Rh, Ir). Thus, reaction with [(1,5-cod)Ru(CO)(3)] or [(1,3-cod)Os(CO)(3)] (cod = cyclooctadiene) afforded [(eta(5)-Cp')(3)Mo(3)S(4)M'(CO)(2)][pts] (M' = Ru: [1][pts]; M' = Os: [2][pts]). When [1][pts] was kept in CH(2)Cl(2)/pentane solution, partial loss of carbonyl ligands occurred and the carbonyl-bridged dicubane cluster [((eta(5)-Cp')(3)Mo(3)S(4)Ru)(2)(mu-CO)(3)][pts](2) was isolated. An X-ray crystal structure revealed the presence of the hitherto unobserved Ru(mu-CO)(3)Ru structural element. The formation of cluster compounds containing Mo(3)S(4)Rh and Mo(3)S(4)Ir cores was achieved in boiling methanol by reacting [(eta(5)-Cp')(3)Mo(3)S(4)][pts] with [M'Cl(cyclooctene)(2)](2) (M' = Rh, Ir) in the presence of PPh(3). In this way [(eta(5)-Cp')(3)Mo(3)S(4)M'Cl(PPh(3))][pts] (M' = Rh, Ir) could be isolated. An alternative route to the Mo(3)S(4)Rh cluster core was found in the reaction of [(eta(5)-Cp')(3)Mo(3)S(4)][pts] with [RhCl(1,5-cod)](2), which yielded [(eta(5)-Cp')(3)Mo(3)S(4)Rh(cod)][pts](2) ([7][pts](2)). Substitution of the cod ligand in [7][pts](2) by 1,3-bis(diphenylphosphanyl)propane (dppp) gave [(eta(5)-Cp')(3)Mo(3)S(4)Rh(dppp)][pts](2).     

Synthesis and reactivity of rare earth metal alkyl complexes stabilized by anilido phosphinimine and amino phosphine ligands

Anilido phosphinimino ancillary ligand H(2)L(1) reacted with one equivalent of rare earth metal trialkyl [Ln{CH(2)Si(CH(3))(3)}(3)(thf)(2)] (Ln=Y, Lu) to afford rare earth metal monoalkyl complexes [L(1)LnCH(2)Si(CH(3))(3)(THF)] (1 a: Ln=Y; 1 b: Ln=Lu). In this process, deprotonation of H(2)L(1) by one metal alkyl species was followed by intramolecular C--H activation of the phenyl group of the phosphine moiety to generate dianionic species L(1) with release of two equivalnts of tetramethylsilane. Ligand L(1) coordinates to Ln(3+) ions in a rare C,N,N tridentate mode. Complex l a reacted readily with two equivalents of 2,6-diisopropylaniline to give the corresponding bis-amido complex [(HL(1))LnY(NHC(6)H(3)iPr(2)-2,6)(2)] (2) selectively, that is, the C--H activation of the phenyl group is reversible. When 1 a was exposed to moisture, the hydrolyzed dimeric complex [{(HL(1))Y(OH)}(2)](OH)(2) (3) was isolated. Treatment of [Ln{CH(2)Si(CH(3))(3)}(3)(thf)(2)] with amino phosphine ligands HL(2-R) gave stable rare earth metal bis-alkyl complexes [(L(2-R))Ln{CH(2)Si(CH(3))(3)}(2)(thf)] (4 a: Ln=Y, R=Me; 4 b: Ln=Lu, R=Me; 4 c: Ln=Y, R=iPr; 4 d: Ln=Y, R=iPr) in high yields. No proton abstraction from the ligand was observed. Amination of 4 a and 4 c with 2,6-diisopropylaniline afforded the bis-amido counterparts [(L(2-R))Y(NHC(6)H(3)iPr(2)-2,6)(2)(thf)] (5 a: R=Me; 5 b: R=iPr). Complexes 1 a,b and 4 a-d initiated the ring-opening polymerization of d,l-lactide with high activity to give atactic polylactides.     

Chelate and pincer carbene complexes of rhodium and platinum derived from hexaphenylcarbodiphosphorane, Ph3P=C=PPh3

The reaction of [(cod)RhCl]2 with Ph3P=C=PPh3 (1) gave the bidentate Rh(I) carbene complex, (cod)Rh[eta2-C{P(C6H4)Ph2}{PPh3}] (2), in which one of the Ph groups in 1 underwent orthometalation to form the chelate. Displacement of cod by 2 equiv of PMe3 transformed 2, via a second orthometalation event, into the Rh(III) C,C,C pincer carbene complex, HRh(PMe3)2[eta3-C{P(C6H4)Ph2}2] (3). The reaction of [Me2Pt(SMe2)]2 with 1 led directly to the analogous C,C,C pincer carbene complex of Pt(II), (Me2S)Pt[eta3-C{P(C6H4)Ph2}2] (4). DFT calculations on a model form of 3 suggest a net single sigma-bonding interaction between Rh and an sp2-hybridized carbene center, with a HOMO that is predominantly carbene pz in character.     

Solid-state (15)N CPMAS NMR and computational analysis of ligand hapticity in rhodium(η-diene) poly(pyrazolyl)borate complexes

Novel [Rh(η-diene)Tp(x)] complexes of sterically encumbered Tp(x) ligands (Tp(x) = Tp(4Bo), diene = cod, 1; nbd, 2; Tp(x) = Tp(4Bo,5Me), diene = cod, 3; nbd, 4; Tp(x) = Tp(a,3Me), diene = cod, 5; nbd, 6; Tp(x) = Tp(a*,3Me), diene = cod, 7; nbd, 8) have been prepared by treatment of [Rh(η-diene)(μ-Cl)](2) with TlTp(x) (Tp(x) in general, in detail: Tp(4Bo) = hydrotris(indazol-1-yl)borate, Tp(4Bo,5Me) = hydrotris(5-methyl-indazol-1-yl)borate, Tp(a,3Me) = hydrotris(3-methyl-2H-benz[g]-4,5-dihydroindazol-2-y1)borate, Tp(a*,3Me) = hydrotris(3-methyl-2H-benz[g]indazol-2-yl)borate), and characterized by analytical and spectral data (IR, (1)H, (11)B, and (13)C NMR solution). The structures adopted by [Rh(nbd)Tp(4Bo)] 2, [Rh(cod)Tp(4Bo,5Me)] 3, [Rh(nbd)Tp(a,3Me)] 6, [Rh(nbd)Tp(a*,3Me)] 8, and [Rh(nbd)Tp(a*,3Me*)] 8* (incorporating a borotropomeric ligand), have been investigated. Low steric hindrance between the ligands in 2 and 3 permits κ(3) coordination of the pyrazolylborate while the high steric encumbrance present in 6, 8, and 8* results in κ(2) ligands. The coordination modes of the ligands to the metal have also been established by (15)N CPMAS studies of selected ligands and their corresponding Rh complexes. These spectroscopic data are in agreement with the (15)N chemical shifts obtained by using quantum-chemical methods to assist reliable assignments of the experimental values, affording new insights into the extraction of structural information concerning the hapticity (κ(2) or κ(3)) of the poly(pyrazolyl)borate ligands to the Rh metal.     

Insertion reactions of alkynes and organic isocyanides into the palladium-carbon bond of dimetallic Fe-Pd alkoxysilyl complexes

Insertion of MeO(2)C-C[triple bond]C-CO(2)Me (DMAD) into the Pd-C bond of the heterodimetallic complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d(dmba-C)] (2) (dppm = Ph(2)PCH(2)PPh(2), dmba-C = metallated dimethylbenzylamine) and [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d(8-mq-C,N)] (3) (8-mq-C,N = cyclometallated 8-methylquinoline) yielded the sigma-alkenyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (7) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(CO(2)Me)[double bond, length as m-dash]C(CO(2)Me)(CH(2)C(9)H(6)N)}] (8), respectively. The latter afforded the adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{C(CO(2)Me)=C(CO(2)Me)(CH(2)C(9)H(6)N)}(CNBu(t))] (9) upon reaction with 1 equiv. of Bu(t)NC. The heterodinuclear sigma-butadienyl complexes [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph=C(Ph)C(CO(2)Me)=(CO(2)Me)(o-C(6)H(4)CH(2)NMe(2))}] (11) and [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(Ph)=C(CO(2)Et)C(Ph)=C(CO(2)Et)(CH(2)C(9)H(6)N)}] (13) have been obtained by reaction of the metallate K[Fe{Si(OMe)(3)}(CO)(3)(dppm-P)] (dppm = Ph(2)PCH(2)PPh(2)) with [P[upper bond 1 start]dCl{C(Ph)=C(Ph)C(CO(2)Me)=C(CO(2)Me)(o-C(6)H(4)CH(2)N[upper bond 1 end]Me(2))}] or [P[upper bond 1 start]dCl{C(Ph)=C(CO(2)Et)C(Ph)=(CO(2)Et)}(CH(2)C(9)H(6)N[upper bond 1 end])], respectively. Monoinsertion of various organic isocyanides RNC into the Pd-C bond of 2 and 3 afforded the corresponding heterometallic iminoacyl complexes. In the case of complexes [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end][upper bond 1 start]d{C=(NR)(CH(2)C(9)H(6)N[upper bond 1 end])}] (15a R = Ph, 15b R = xylyl), a static six-membered C,N chelate is formed at the Pd centre, in contrast to the situation in [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=NR)(o-C(6)H(4)CH(2)NMe(2))}] (14a R = o-anisyl, 14b R = 2,6-xylyl) where formation of a mu-eta(2)-Si-O bridge is preferred over NMe(2) coordination. The outcome of the reaction of the dimetallic alkyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe] with RNC depends both on the stoichiometry and the electronic donor properties of the isocyanide employed for the migratory insertion process. In the case of o-anisylisocyanide, the iminoacyl complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{C(=N-o-anisyl)Me}] (16) results from the reaction in a 1 : 1 ratio. Addition of three equiv. of o-anisylisocyanide affords the tris(insertion) product [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}] (18). After addition of a fourth equivalent of o-anisylNC, exclusive formation of the isocyanide adduct [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]e(mu-dppm)P[upper bond 1 end]d{[C(=N-o-anisyl)](3)Me}(CN-o-anisyl)] (19) was spectroscopically evidenced. In the complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]d{[C(=N-o-C(6)H(4)COCH(2))](2)Me}] (20), the sigma-bound diazabutadienyl unit is part of a 12-membered organic macrocyle which results from bis(insertion) of 1,2-bis(2-isocyanophenoxy)ethane into the Pd-Me bond of the precursor complex [(OC)(3)F[upper bond 1 start]e{mu-Si(OMe)(2)([lower bond 1 start]OMe)}(mu-dppm)P[lower bond 1 end][upper bond 1 end]dMe]. In contrast, addition of two equivalents of tert-butylisocyanide to a solution of the latter afforded [(OC)(3){(MeO)(3)Si}F[upper bond 1 start]Fe(mu-dppm)P[upper bond 1 end]d{C(=NBu(t))Me}(CNBu(t))] (21) in which both a terminal and an inserted isocyanide ligand are coordinated to the Pd centre. In all cases, there was no evidence for competing CO substitution at the Fe(CO)(3) fragment by RNC. The molecular structures of the insertion products 8 x CH(2)Cl(2) and 16 x CH(2)Cl(2) have been determined by X-ray diffraction.     

Sequential reduction of high hydride count octahedral rhodium clusters [Rh6(PR3)6H12][BArF4]2: redox-switchable hydrogen storage

Cyclic voltammetry on the octahedral rhodium clusters with 12 bridging hydride ligands, [Rh6(PR3)6H12][BArF4]2 (R = Cy Cy-[H12]2+, R = iPr iPr-[H12]2+; [BArF4]- = [B{C6H3(CF3)2}4]-) reveals four potentially accessible redox states: [Rh6(PR3)6H12]0/1+/2+/3+. Chemical oxidation did not produce stable species, but reduction of Cy-[H12]2+ using Cr(eta6-C6H6)2 resulted in the isolation of Cy-[H12]+. X-ray crystallography and electrospray mass spectrometry (ESI-MS) show this to be a monocation, while EPR and NMR measurements confirm that it is a monoradical, S = 1/2, species. Consideration of the electron population of the frontier molecular orbitals is fully consistent with this assignment. A further reduction is mediated by Co(eta5-C5H5)2. In this case the cleanest reduction was observed with the tri-isopropyl phosphine cluster, to afford neutral iPr-[H12]. X-ray crystallography confirms this to be neutral, while NMR and magnetic measurements (SQUID) indicate an S =1 paramagnetic ground state. The clusters Cy-[H12]+ and iPr-[H12] both take up H2 to afford Cy-[H14]+ and iPr-[H14], respectively, which have been characterized by ESI-MS, NMR spectroscopy, and UV-vis spectroscopy. Inspection of the frontier molecular orbitals of S = 1 iPr-[H12] suggest that addition of H2 should form a diamagnetic species, and this is the case. The possibility of "spin blocking" in this H2 uptake is also discussed. Electrochemical investigations on the previously reported Cy-[H16]2+ [J. Am. Chem. Soc. 2006, 128, 6247] show an irreversible loss of H2 on reduction, presumably from an unstable Cy-[H16]+ species. This then forms Cy-[H12]2+ on oxidation which can be recharged with H2 to form Cy-[H16]2+. We show that this loss of H2 is kinetically fast (on the millisecond time scale). Loss of H2 upon reduction has also been followed using chemical reductants and ESI-MS. This facile, reusable gain and loss of 2 equiv of H2 using a simple one-electron redox switch represents a new method of hydrogen storage. Although the overall storage capacity is very low (0.1%) the attractive conditions of room temperature and pressure, actuation by the addition of a single electron, and rapid desorption kinetics make this process of interest for future H2 storage applications.     

Thallium(I) sandwich, multidecker, and ether complexes stabilized by weakly-coordinating anions: a spectroscopic, structural, and theoretical investigation

The reaction of thallium ethoxide with [H(OEt2)2][H2N{B(C6F5)3}2] in diethyl ether afforded [Tl(OEt2)3][H2N{B(C6F5)3}2] (2a), [Tl(OEt2)4][H2N{B(C6F5)3}2] (2b), or [Tl(OEt2)2][H2N{B(C6F5)3}2].CH2Cl2 (2c), depending on the reaction conditions. The dication in the hydrolysis product [Tl4(mu3-OH)2][H2N{B(C6F5)3}2]2.4CH2Cl2 consists of two bridging and two terminal Tl+ ions bound to triply bridging hydroxides. Heating Et2O complexes in toluene afforded [Tl(eta6-toluene)n][H2N{B(C6F5)3}2] (4, n = 2, 3), while C6Me6 addition gave the first thallium-C6Me6 adduct, [Tl(eta6-C6Me6)2][H2N{B(C6F5)3}2].1.5CH2Cl2 (5a), a bent sandwich complex with very short Tl...centroid distances. These arene complexes show no close contacts between cations and anions. Displacement of toluene ligands by ferrocene gave [Tl2(FeCp2)3][H2N{B(C6F5)3}2]2.5CH2Cl2 (6) which contains the multidecker cations [Tl(FeCp2)]+ and [Tl(FeCp2)2]+ in a 1:1 ratio. By contrast, decamethylferrocene leads to electron transfer; the isolable thallium-ferrocene complexes may therefore be viewed as precursor complexes for this redox step. With 18-crown-6 the complexes [Tl(18-crown-6)2][H2N{B(C6F5)3}2] (11a) and [Tl(18-crown-6)][H2N{B(C6F5)3}2].2CH2Cl2 (11b) were isolated. The structure of the latter shows an eight-coordinate thallium ion, where the coordination to the six oxygen donors in equatorial positions is completed by axial contacts to two F atoms of the counter anions. The bonding between thallium(I) and arenes was explored by density-functional theory (DFT) calculations. The optimized geometry of [Tl(tol)3]+ converged to a structure very similar to that obtained experimentally. Calculations on [Tl(C6Me6)2]+ (5b) to establish whether a linear or bent geometry is the most stable revealed a very flat potential-energy surface for distortions of the Ctr(3)-Tl-Ctr(4) angle. Overall, there is very little energetic preference for one particular geometry over another above about 140 degrees , in good agreement with the crystallographic geometry. The calculated Tl-arene interaction energies increase from 73.7 kJ mol-1 for toluene to 121.7 kJ mol-1 for C6Me6.     

Room-temperature phosphorescence and energy transfer in luminescent multinuclear platinum(II) complexes of branched alkynyls

A series of luminescent branched platinum(II) alkynyl complexes, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]C-C6H4C[triple bond]C}3C6H3] (R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, C6H4SAc, 1-napthyl (Np), 1-pyrenyl (Pyr), 1-anthryl-8-ethynyl (HC[triple bond]CAn)), [1,3-{PyrC[triple chemical bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], and [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], was successfully synthesized by using the precursors [1,3,5-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] or [1,3-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3]. The X-ray crystal structures of [1,3,5-{MeOC6H4C[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An] have been determined. These complexes were found to show long-lived emission in both solution and solid-state phases at room temperature. The emission origin of the branched complexes [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, and C6H4SAc was tentatively assigned to be derived from triplet states of predominantly intraligand (IL) character with some mixing of metal-to-ligand charge-transfer (MLCT) (dpi(Pt)-->pi*(C[triple bond]CR)) character, while the emission origin of the branched complexes with polyaromatic alkynyl ligands, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=Np, Pyr, or HC[triple bond]CAn, [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An], was tentatively assigned to be derived from the predominantly 3IL states of the respective polyaromatic alkynyl ligands, mixed with some 3MLCT (d(pi)(Pt)-->pi*(C[triple bond]CR)) character. By incorporating different alkynyl ligands into the periphery of these branched complexes, one could readily tune the nature of the lowest energy emissive state and the direction of the excitation energy transfer.     

Diaminocarbene and phosphonium ylide ligands: a systematic comparison of their donor character

The coordinating properties of the diaminocarbene (A) and phosphonium ylide (B) ligand types have been investigated systematically through a test family of C,C-chelating ligands containing two moieties of either kind. The overall character of o-C6H4A(a)B(b) ligands (a + b = 2) has been analyzed from the IR CO stretching frequencies of isostructural complexes [(eta(2)-C6H4A(a)B(b))Rh(CO)2][TfO]. The test moieties A = NC2H2N(+)(Me)C(-) and B = Ph2P(+)CH2(-) were first considered. While the ligands bearing at least one diaminocarbene end (AA, a = 2 and AB, a = 1) could be generated (and trapped by complexation), the bis-ylide case BB (a = 0) proved to be awkward: treatment of the dication C6H4(P(+)Ph2Me)2 with n-BuLi indeed lead to the Schmidbaur's carbodiphosphorane Ph3PCPPh2Me, through an unprecendented ylido-pentacoordinated phosphorane which could be fully characterized by NMR techniques. The bis-ylide ligand type C6H4B2 could however be generated by bridging the phosphonium methyl groups by a methylene link (B2 = (P(+)Ph2CH(-))2CH2), preventing the formation of the analogous highly strained carbodiphosphorane. The three complexes [(eta(2)-C6H4A(a)B(b))Rh(CO)2][TfO] were fully characterized, including by X-ray diffraction analysis and (103)Rh NMR spectroscopy. Comparison of their IR spectra indicated that the A2 type bis-NHC ligand is less donating than the hybrid AB type, which is itself less donating than the B2 type bis-ylide ligand. The excellent linear variation of the nu(CO) frequencies vs a (= 0, 1, 2) shows that the coordinating moieties act in a pseudoindependent way. This was confirmed by DFT calculations at the B3PW91/6-31G**/LANL2DZ*(Rh) level. It is therefore demonstrated that a phosphonium ylide ligand is a stronger donor than a diaminocarbene ligand.     

High hydride count rhodium octahedra, [Rh6(PR3)6H12][BArF4]2: synthesis, structures, and reversible hydrogen uptake under mild conditions

A new class of transition metal cluster is described, [Rh(6)(PR(3))(6)H(12)][BAr(F)(4)](2) (R = (i)Pr (1a), Cy (2a); BAr(F)(4) = [B{C(6)H(3)(CF(3))(2)}(4)](-)). These clusters are unique in that they have structures exactly like those of early transition metal clusters with edge-bridging pi-donor ligands rather than the structures expected for late transition metal clusters with pi-acceptor ligands. The solid-state structures of 1a and 2a have been determined, and the 12 hydride ligands bridge each Rh-Rh edge of a regular octahedron. Pulsed gradient spin-echo NMR experiments show that the clusters remain intact in solution, having calculated hydrodynamic radii of 9.5(3) A for 1a and 10.7(2) A for 2a, and the formulation of 1a and 2a was unambiguously confirmed by ESI mass spectrometry. Both 1a and 2a take up two molecules of H(2) to afford the cluster species [Rh(6)(P(i)Pr(3))(6)H(16)][BAr(F)(4)](2) (1b) and [Rh(6)(PCy(3))(6)H(16)][BAr(F)(4)](2) (2b), respectively, as characterized by NMR spectroscopy, ESI-MS, and, for 2b, X-ray crystallography using the [1-H-CB(11)Me(11)](-) salt. The hydride ligands were not located by X-ray crystallography, but (1)H NMR spectroscopy showed a 15:1 ratio of hydride ligands, suggesting an interstitial hydride ligand. Addition of H(2) is reversible: placing 1b and 2b under vacuum regenerates 1a and 2a. DFT calculations on [Rh(6)(PH(3))(6)H(x)()](2+) (x = 12, 16) support the structural assignments and also show a molecular orbital structure that has 20 orbitals involved with cluster bonding. Cluster formation has been monitored by (31)P{(1)H} and (1)H NMR spectroscopy, and mechanisms involving heterolytic H(2) cleavage and elimination of [HP(i)Pr(3)](+) or the formation of trimetallic intermediates are discussed.     

The reaction of mixtures of [Rh4(CO)12] and triphenylphosphite with carbon monoxide or syngas as studied by high-resolution, high-pressure NMR spectroscopy

The fragmentation and redistribution reactions of [Rh4(CO)12-x{P(OPh)3}x] (x = 1-4) with carbon monoxide have been studied using high-resolution, high-pressure NMR spectroscopy. Under the conditions of efficient gas mixing in a high-pressure NMR bubble column, [Rh4(CO)9{P(OPh)3}3] fragments to give mainly [Rh2(CO)6{P(OPh)3}2]; [Rh4(CO)11{P(OPh)3}] is also observed,implying redistribution of the phosphite ligand and/or recombination of the dimers to tetrameric clusters. Fragmentation of[Rh4(CO)10{P(OPh)3}2] is found to be pressure-dependent giving predominantly [Rh2(CO)6{P(OPh)3}2] at low CO pressure (1-40 bar), and increasing amounts of [Rh2(CO)7{P(OPh)3}] at higher (40-80 bar) pressure. Using Syngas (CO : H2 (1 : 1)) instead of CO in the above fragmentations, homolytic addition of H2 to the dimer [Rh2(CO)6{P(OPh)3}2] to give [RhH(CO)3{P(OPh3}] and [RhH(CO)2{P(OPh)3}2] is observed. The distribution of tetrameric species obtained is similar to that obtained under the same partial pressure of CO. On depressurisation/out-gassing of the sample, the original mixture of tetrameric clusters is obtained.     

Alkaline earth metal complexes of a phosphine-borane-stabilized carbanion: synthesis, structures, and stabilities

The reaction between either MgI2 or CaI2 and 2 equiv of [(Me3Si)2{Me2(H3B)P}C]K (2) in toluene gives the corresponding organo-alkaline earth metal compounds [(Me3Si)2{Me2(H3B)P}C]2M in moderate to good yields [M = Mg (3), Ca (4)]. Compound 3 crystallizes solvent-free, whereas X-ray quality crystals of 4 could not be obtained in the absence of coordinating solvents; crystallization of 4 from cold methylcyclohexane/THF gives the solvate [(Me3Si)2{Me2(H3B)P}C]2Ca(THF)4 (4a). The corresponding heavier alkaline earth metal complexes [(Me3Si)2{Me2(H3B)P}C]2M(THF)5 [M = Sr (7), Ba (8)] are obtained from the reaction between MI2 and 2 equiv of 2 in THF, followed by recrystallization from cold methylcyclohexane/THF. Compound 3 degrades over a period of several weeks at room-temperature both in the solid state and in toluene solution to give the free phosphine-borane (Me3Si)2{Me2(H3B)P}CH (5) as the sole phosphorus-containing product. In addition, compounds 3, 4, and 4a react rapidly with THF in toluene solution, yielding 5 as the sole phosphorus-containing product; in contrast, compounds 7 and 8 are stable toward this solvent.     

Synthesis and Crystal Structure of [O-4,6-di-^tBu-C6H2-2-CH2-[C{N（CHCH）NMe}]3Y

The title complex L3Y(L = [O-4,6-di-tBu-C6H2-2-CH{CH(iPr2NCHCHN) }]) has been synthesized by the reaction of LiY[N(iPr) 2]4 with H2LCl and LiBu in a 1:3:2 molar ratio at 0 ℃ in THF,and characterized by single-crystal X-ray diffraction. It crystallizes in monoclinic,space group P21 with a = 14.3612(16) ,b = 14.7524(14) ,c = 16.898(2) ,β = 105.708(3) o,V = 3446.3(6) 3,Mr = 1203.50,Z = 2,Dc = 1.160 Mg/m3,μ(MoKα) = 0.90 mm-1 and F(000) = 1296. The structure was refined to R = 0.050 and wR = 0.110 for 10213 observed reflections with I > 2σ(I) . The Y ion is coordinated to three phenoxo groups and three NHC ligands to form a distorted octahedral geometry. The temperature effect on the reaction leads to the 1,2-benzyl migration of NHC ligand to form the title complex.     

Penta- and hexaruthenium carbonyl 'raft' complexes supported by monocarborane cage ligands

Reaction between [PPh4][closo-4-CB8H9] and [Ru3(CO)12] in refluxing toluene affords the unprecedented hexaruthenium metallacarborane salt [PPh4][2,3,7-{Ru(CO)3}-2,6,11-{Ru(CO)3}-7,11,12-{Ru(CO)3}-3,6,12-(micro-H)3-2,2,7,7,11,11-(CO)6-closo-2,7,11,1-Ru3CB8H6] (1a), which contains a planar Ru6 'raft' supported by a {CB8} monocarborane cluster. Addition of [CuCl(PPh3)]4 and Tl[PF6] to a CH2Cl2 solution of 1a results in simple cation replacement, forming the analogous [Cu(PPh3)3]+ salt (1b). The phenyl-substituted monocarborane [NEt4][6-Ph-nido-6-CB9H11] reacts with [Ru3(CO)12] in refluxing 1,2-dimethoxyethane to afford the pentaruthenium cluster species [N(PPh3)2][2,3,7-{Ru(CO)3}-3,4,8-{Ru(CO)3}-7,8-(micro-H)2-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H6] (2), after addition of [N(PPh3)2]Cl. Treatment of 2 with [CuCl(PPh3)]4 and Tl[PF6] in CH2Cl2 forms the zwitterionic complex [10,12-{exo-Cu(PPh3)2}-2,3,7-{Ru(CO)3}-3,4,8-{Ru(CO)3}-7,8,10,12-(micro-H)4-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H4] (3). Substitution of CO by PPh3 with concomitant cation replacement occurs on introduction of [AuCl(PPh3)], Tl[PF6], and PPh3 to a CH2Cl2 solution of 2, forming [Au(PPh3)2][2,3,7-{Ru(CO)2PPh3}-3,4,8-{Ru(CO)2PPh3}-7,8-(micro-H)2-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H6] (4). Crystallographic studies confirmed the cluster architectures in 1b, 2, and 3.