Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.     

Anchoring of polyacrylate onto silica and formation of polyacrylate/silica nanocomposite particles via in situ emulsion polymerization

Polyacrylate/silica nanocomposite latex particles were prepared by in situ emulsion polymerization of acrylate monomers initiated by 2,2′-azobis(2-amidinopropane)dihydrochloride (AIBA) adsorbed by silica nanoparticles. The anchoring of polyacrylate (ACR) onto silica nanoparticles was achieved through the physical absorption and chemical grafting reaction. The elution and HF etching experiments showed that most silica nanoparticles were encapsulated by ACR to form the raspberry-like ACR/silica nanocomposite latex particles. The silica nanoparticles with a greater grafting degree of ACR tended to locate in the bulk of the polymer, and the silica particle with a lower grafting degree would not be combined with polymer latex particles and always remained in water phase. The formation of the final ACR/silica nanocomposite latex particles included the anchoring of ACR onto silica primary particles, aggregation of silica primary particles to form the silica-containing latex particles, and the growth of latex particles.     

硅胶基质高效液相色谱填料研究进展

高效液相色谱(HPLC)不仅是一种有效的分析分离手段,也是一种重要的高效制备分离技术。色谱柱是HPLC系统的核心,不同性能的填料是HPLC广泛应用的基础。硅胶是开发最早、研究最为深入、应用最为广泛的HPLC固定相基质,其制备方法主要有喷雾干燥法、溶胶-凝胶法、聚合诱导胶体凝聚法及模板法等。近年来,亚2μm小粒径硅胶、核-壳型硅胶、双孔径硅胶、介孔性硅胶、有机杂化硅胶等新型硅胶应用于HPLC并取得了色谱分离技术的飞速发展,例如基于亚2μm填料的超高压液相色谱技术、基于核-壳型填料的快速分离技术、基于杂化硅胶填料的高温液相色谱技术等。硅胶经表面化学键合、聚合物包覆等有机改性可制得先进的大分子限进填料、温敏性填料、手性填料等,大大扩展了HPLC的应用范围。本文对液相色谱用硅胶的制备方法、改性与修饰方法以及硅胶基质固定相的评价方法加以系统综述,概述了新型硅胶在HPLC中的应用进展,并对硅胶基质填料的发展方向与应用前景进行了展望。     

Synthesis,Characterization and Properties of (Vinyl Triethoxy Silane-grafted PP)/Silica Nanocomposites

A new route has been developed to produce PP/silica nanocomposites starting from porous PP reactor powder and making use of sol-gel chemistry. Silica-like, nano-sized particles were prepared in the pores of the PP reactor powder with a controlled degree of adhesion between PP and silica. Magic-angle spinning (MAS) ²⁹Si NMR spectra showed that the chemical building blocks of the silica-like clusters are of Q³ and Q⁴-type. For (vinyl triethoxy silane (VTES)-grafted PP)/silica nanocomposites, VTES was grafted via solid-state modification (SSM) in porous PP particles. Subsequently, silica particles were prepared by sol-gel technology in the VTES-grafted PP. MAS ²⁹Si NMR and FT-IR spectroscopy showed that the grafted VTES becomes part of the in-situ formed silica particles. The study on the mechanical properties of (VTES-grafted PP)/silica nanocomposites showed that the silica particles improved the impact toughness of PP by a factor of 2, when there is no chemical interaction between the particles and the matrix, while for (VTES-grafted PP)/silica nanocomposites the impact toughness decreased. This indicates that chemical bonding between the filler particles and the PP-matrix results in brittle failure and supports the hypothesis that debonding is necessary for improving the impact toughness of PP with inorganic fillers.     

Preparation of magnetite-loaded silica microspheres for solid-phase extraction of genomic DNA from soy-based foodstuffs

Solid-phase extraction has been widely employed for the preparation of DNA templates for polymerase chain reaction (PCR)-based analytical methods. Among the variety of adsorbents studied, magnetically responsive silica particles are particularly attractive due to their potential to simplify, expedite, and automate the extraction process. Here we report a facile method for the preparation of such magnetic particles, which entails impregnation of porous silica microspheres with iron salts, followed by calcination and reduction treatments. The samples were characterized using powder X-ray diffractometry (XRD), scanning electron microscopy (SEM), nitrogen adsorption/desorption isotherms, and vibrating sample magnetometry (VSM). XRD data show that magnetite nanocrystals of about 27.2 nm are produced within the pore channels of the silica support after reduction. SEM images show that the as-synthesized particles exhibit spherical shape and uniform particle size of about 3 μm as determined by the silica support. Nitrogen sorption data confirm that the magnetite-loaded silica particles possess typical mesopore structure with BET surface area of about 183 m²/g. VSM data show that the particles display paramagnetic behavior with saturation magnetization of 11.37 emu/g. The magnetic silica microspheres coated with silica shells were tested as adsorbents for rapid extraction of genomic DNA from soybean-derived products. The purified DNA templates were amplified by PCR for screening of genetically modified organisms (GMOs). The preliminary results confirm that the DNA extraction protocols using magnetite-loaded silica microspheres are capable of producing DNA templates which are inhibitor-free and ready for downstream analysis.     

Encapsulation of Inorganic Particles by Dispersion Polymerization in Polar Media: 2. Effect of Silica Size and Concentration on the Morphology of Silica–Polystyrene Composite Particles

Following a previous work (Bourgeat-Lami, E., and Lang, J.,J. Colloid Interface Sci.197, 293 (1998)), encapsulation of silica beads has been achieved by dispersion polymerization of styrene in an aqueous ethanol medium using poly(N-vinyl pyrrolidone) as stabilizer. Silica beads, prepared according to the Stöber method, were coated prior to polymerization by grafting 3-(trimethoxysilyl)propyl methacrylate onto the surface. A great number of silica beads per composite particle were previously found using beads that had diameters between 49 and 120 nm. In the present work, larger silica beads with diameters between 191 and 629 nm are investigated. We demonstrate by transmission electron microscopy that, consequently, only a small number of silica beads are contained in the composite particles. By counting the composite particles containing precisely zero, one, two, three, four, and more than four silica beads, it clearly appears that the encapsulation of only one silica bead can be obtained simply by increasing the size of the beads. Under our experimental conditions, the optimal bead diameter for achieving composite particles containing only one silica bead turns out to be around 450 nm. We show that increasing the silica bead size above this value results in an increased number of composite particles without silica beads. In contrast, the number of composite particles with two, three, four, or more than four silica beads increases with decreasing silica bead size. In addition to the above variations in composition of the composite particles, changes in particle shapes were also observed as a function of the size of the silica beads and the styrene concentration in the polymerization medium. Hypotheses concerning these variations are presented.     

Fabrication of teardrop-shaped silica particles in polyelectrolyte diluted solution through in situ sol–gel process

A new strategy to fabricate teardrop-shaped silica particles is presented. Monodispersed teardrop-like silica particles were obtained through basic catalyzed sol–gel process of tetraethoxysilane by employed sodium polyacrylate as soft template. Increasing the salt concentration of solution, the morphology of silica particles can transform from teardrop-like to hollow structures, and finally formed solid particles. The morphologies of silica particles are characterized by TEM and SEM. Our finding can be scaled up for large-scale synthesis of unusual structures of inorganic or composite materials in a predictable manner. This study is expected to provide further understanding of the role of polyelectrolyte in the synthesis of inorganic materials towards design of unusual architectures and functional materials.     

Antimicrobial silica particles loaded with quaternary ammonium polyethyleneimine network

Silica particles functionalized with quaternary ammonium groups were prepared by interpenetrating polyethylenimine (PEI) into silica particles and crosslinking with diiodopentane, followed by octyliodide alkylation and methyliodide quaternarization (S‐QA‐PEI). The synthesized S‐QA‐PEI particles were identified with a slight particle size increase of 2–3 µm. Different ratios of PEI:silica particles were prepared and analyzed. While silica particles are negatively charged, ?16.7 ± 5.11 mV, the prepared S‐QA‐PEI particles are positively charged, +50–60 mV. These particles were embedded in poly(ethylene vinyl acetate) and poly(ethylene methacrylic acid) coatings which exhibited strong antibacterial activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Fabrication of silica-on-titania and titania-on-silica nanoparticle assemblies

Structures of silica particles on a titania surface and titania particles on a silica surface were formed by deposition of SiO₂ or TiO₂ nanoparticles on pre-patterned substrates. Photolithography was used to create a matrix for the selective deposition of nanoparticles by immersion in a colloidal suspension. Atomic force microscopy was used to investigate the topography of these inorganic assemblies. Whereas two-dimensional colloidal patches of TiO₂ nanoparticles are obtained on silica surfaces, SiO₂ nanoparticles form three-dimensional, U-shaped channels on titania surfaces.The influence of electrostatic forces on assembly structure is vital. The isoelectric points of the particles, the pre-patterned matrix and the photo-resist are key parameters and may be manipulated to achieve various microstructures. The 2D nanoparticle arrays of titania on silica and 3D channels (built of silica nanoparticles) on flat titania surfaces are of potential interest in lab-on-a-chip applications.     

Fractal Characterization of Silica Sol Prepared by the Sol-Gel Method: From the Sol Formation to the Flocculation Process

The fractal characterization of silica particles prepared by the sol-gel method was obtained; from the beginning of the sol-gel synthesis to the aggregation process of these particles by adding metal ions in solution, the fractal dimension was determined. At the beginning of the sol-gel process, unstable structures were formed due, essentially, to the auto-catalytic nature of the sol-gel condensation reactions; these particles are fractal structures with a fractal exponent corresponding to a reaction limited aggregation regime. As the time proceeds, the reactants are consumed approaching the system to equilibrium, stabilizing the size of the silica particles. The silica sol can be flocculated by adding metal ions in solution. The fractal exponent for the aggregation process was determined, obtaining a value corresponding to a diffusion limited aggregation regime.     

In situ small-angle X-ray scattering studies during the formation of polymer/silica nanocomposite particles in aqueous solution

This study is focused on the formation of polymer/silica nanocomposite particles prepared by the surfactant-free aqueous emulsion polymerization of 2,2,2-trifluoroethyl methacrylate (TFEMA) in the presence of 19 nm glycerol-functionalized aqueous silica nanoparticles using a cationic azo initiator at 60 °C. The TFEMA polymerization kinetics are monitored using ¹H NMR spectroscopy, while postmortem TEM analysis confirms that the final nanocomposite particles possess a well-defined core–shell morphology. Time-resolved small-angle X-ray scattering (SAXS) is used in conjunction with a stirrable reaction cell to monitor the evolution of the nanocomposite particle diameter, mean silica shell thickness, mean number of silica nanoparticles within the shell, silica aggregation efficiency and packing density during the TFEMA polymerization. Nucleation occurs after 10–15 min and the nascent particles quickly become swollen with TFEMA monomer, which leads to a relatively fast rate of polymerization. Additional surface area is created as these initial particles grow and anionic silica nanoparticles adsorb at the particle surface to maintain a relatively high surface coverage and hence ensure colloidal stability. At high TFEMA conversion, a contiguous silica shell is formed and essentially no further adsorption of silica nanoparticles occurs. A population balance model is introduced into the SAXS model to account for the gradual incorporation of the silica nanoparticles within the nanocomposite particles. The final PTFEMA/silica nanocomposite particles are obtained at 96% TFEMA conversion after 140 min, have a volume-average diameter of 216 ± 9 nm and contain approximately 274 silica nanoparticles within their outer shells; a silica aggregation efficiency of 75% can be achieved for such formulations.

SAXS is used to study the formation of polymer/silica nanocomposite particles prepared by surfactant-free aqueous emulsion polymerization of 2,2,2-trifluoroethyl methacrylate in the presence of silica nanoparticles using a azo initiator at 60 °C.     

Preparation of silica/perfluoroalkyl methacrylate polymer inorganic/organic particles in supercritical carbon dioxide

Silica/perfluoroalkyl methacrylate polymer (PHDFDMA) particles were prepared using various types of silica by polymerization in supercritical carbon dioxide. There are three steps in the fabrication of inorganic/organic hybrid composites: silane treatment, polymerization, and soxhlet extraction. After these steps, we observed the morphology of silica/PHDFDMA particles using field emission scanning electron microscope and transmission electron microscope. From these analyses, we can confirm that the silica/PHDFDMA core/shell particles were obtained when we used Ludox and silica gel as a silica template. On the other hand, core/shell particles were not formed when using fused silica and precipitated silica. In addition, to confirm the amount of polymer on silica, we performed an analysis using thermogravimetric analysis and electron probe micro-analyzer. In this case, PHDFDMA was approximately 20 wt.% on the silica gel and 40 wt.% on the Ludox, respectively. When using fused silica and precipitated silica as a template, amount of PHDFDMA on silica was maximum 5 wt.% and over 40 wt.%, respectively. From these results, to obtain enough PHDFDMA encapsulated silica particle, colloidal silica, Ludox is the best template in four different types of silica.     

Size effect on the rheological behavior of nanoparticle suspensions in associating polymer solutions

Associating polymers are hydrophilic long-chain molecules containing a small amount of hydrophobic groups and tend to create bonds between chains by reversible associating interactions. The effects of associating polymer on the steady-shear viscosity and dynamic viscoelasticity are studied for suspensions of silica nanoparticles with diameters of 8, 18, and 25 nm. The silica particles of 8 nm are entrapped in the transient network of associating polymer by reversible adsorption. The enhancement of network results in the high viscosity with a Newtonian flow profile in the limit of zero shear rate. In suspensions of 25 nm silica, the hydrophobes extending from the chains adsorbed onto different particles can form a micelle by association interactions. The multichain bridging gave rise to the shear-thinning flow and high storage modulus at low frequencies. The suspensions of 25 nm silica are characterized as flocculated systems. Because of intermediate curvature, the flexible bridges are formed between silica particles of 18 nm. When the flexible bridges are highly extended within the lifetime in shear fields, the suspensions show shear-thickening flow. The shear-thickening flow can be attributed to the elastic effect of flexible bridges.     

Determination of silica coating efficiency on metal particles using multiple digestion methods

Nano-sized metal particles, including both elemental and oxidized metals, have received significant interest due to their biotoxicity and presence in a wide range of industrial systems. A novel silica technology has been recently explored to minimize the biotoxicity of metal particles by encapsulating them with an amorphous silica shell. In this study, a method to determine silica coating efficiency on metal particles was developed. Metal particles with silica coating were generated using gas metal arc welding (GMAW) process with a silica precursor tetramethylsilane (TMS) added to the shielding gas. Microwave digestion and Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES) were employed to solubilize the metal content in the particles and analyze the concentration, respectively. Three acid mixtures were tested to acquire the appropriate digestion method targeting at metals and silica coating. Metal recovery efficiencies of different digestion methods were compared through analysis of spiked samples. HNO₃/HF mixture was found to be a more aggressive digestion method for metal particles with silica coating. Aqua regia was able to effectively dissolve metal particles not trapped in the silica shell. Silica coating efficiencies were thus calculated based on the measured concentrations following digestion by HNO₃/HF mixture and aqua regia. The results showed 14-39% of welding fume particles were encapsulated in silica coating under various conditions. This newly developed method could also be used to examine the silica coverage on particles of silica shell/metal core structure in other nanotechnology areas.     

Synthesis of composite latex particles filled with silica

Encapsulation of silica nanoparticles was performed by dispersion polymerization of styrene, butyl acrylate and butyl methacrylate in aqueous alcoholic media. Following previous works^1‐3), the silica beads were first modified by reacting on their surface the 3‐trimethoxysilyl propyl methacrylate coupling agent (MPS). In every case, the silica beads are all surrounded by polymer giving composite latex particles filled with silica. Each composite particle contains from one to a great number of silica beads. Changing the size or the concentration of the silica beads, and the experimental conditions for the synthesis of the polymer particles enables to control this number. One can take benefit of this to synthesize model composite particles with controlled compositions.     

Mechanical behaviour of nano composite aerogels

In order to improve the mechanical properties of silica aerogels, we propose the synthesis of nano composite aerogels. Silica particles (20–100 nm) are added in the monomer solution, just before gelling and supercritical drying. The silica particles addition increases the mechanical properties, but also affects the aggregation process, the aerogel structure and the pore sizes. We discuss the different parameters which infer in the mechanical behaviour of silica aerogel such as: brittle behaviour, load bearing fraction of solid (pore volume), internal stresses (shrinkage), size and distribution of flaws, subcritical flaws propagation (chemical susceptibility). With silica particles addition, the mechanical properties rapidly increase, stiffening and strengthening the structure by a factor 4–8. Moreover, the mechanical strength distribution and the Weibull modulus characterizing the statistical nature of flaws size in brittle materials show a more homogeneous strength distribution. The composite structure is made of two imbricate networks, the polymeric silica and the particles silica networks. Ultra Small Angle X-ray Scattering experiments show that besides the fractal network usually built up by the organosiloxane, the silica particles is forming another fractal structure at a higher scale. The fractal structure could be related to the low Weibull parameter characteristic of a large flaws size distribution, pores being the critical flaws.     

Synthesis of spherical silica particles by sol‐gel method and application

Spherical silica particles were synthesized using the sol‐gel method by hydrolyzing tetraethyl orthosilicate (TEOS) with an alkali catalyst, and it was investigated how the experimental conditions (the reaction temperature, the concentration and dropping rate of the hydrolysis catalyst solution) affected the size and morphology of silica particles. Furthermore, the silica particles were doped with sodium fluoride to measure their ion release ability. The mean diameters of the silica particles changed according to the reaction temperature and the dropping rate of the hydrolysis catalyst, namely the higher the reaction temperature or the slower the dropping rate the smaller are the mean diameters. The surface area of the silica particles was significantly different depending on the dropping rate of the hydrolysis catalyst, namely the slower the dropping rate the larger the specific surface area. The specific heat capacity and thermal reduction (TG) of the silica particles were significantly different according to the reaction temperature, namely the higher the reaction temperature the lower the specific heat capacity and the TG. It was found that the fluoride‐retaining ability was proportional to the surface area of silica particles. The fluoride ion release was equilibrated on elapsing 5 min. Copyright © 2008 John Wiley & Sons, Ltd.     

Fabrication of carbon/silica hybrid materials using cationic polymerization and the sol-gel process

Silica particles with different morphology have been functionalized with carbon shells by different synthetic procedures. In the key step, the bare silica particles are functionalized by a specific cationic surface polymerization with furfuryl alcohol (FA). The polyfurfuryl alcohol (PFA)/silica hybrid particles have been also post-functionalized with maleic anhydride (MSA) by a Diels Alder reaction. Simultaneously occuring cationic polymerization of FA and sol-gel process with TEOS has been used for producing interpenetrating carbon-silica hybrid materials. The thermal transformation of the PFA component on silica into the carbon phase has been carried out under argon atmosphere in a temperature range from 700°C to 900°C. The influence of the former morphology of the silica on the homogenity of the resulting carbon layer is shown by zetapotential measurements and electron microscopic investigations.     

Synthesis of monodisperse fluorescent core-shell silica particles using a modified Stober method for imaging individual particles in dense colloidal suspensions

Core-shell silica particles, with a diameter of 1.5 mum, containing a dye fluorescein isothiocyanate (FITC), are synthesized by the hydrolysis and condensation of tetraethylorthosilicate (TEOS). Sodium dodecyl sulfate (SDS) is added to synthesize fluorescent core particles with the diameter of approximately 1 mum. In the addition of SDS, the surface charge reduced by counterions (Na+) of the surfactant leads to a higher degree of aggregation of the primary particles and the formation of larger secondary particles. The particle growth kinetics confirms the aggregation growth model for the synthesis of monodisperse silica particles, and also shows the dependence of final particle size on colloidal stability resulting from the addition of SDS. Light and X-ray scattering data reveal that the final particles have compactly packed structures with smooth surfaces. The seeded growth technique is then used to form a silica shell layer on the fluorescent core. The added amount of water and NH4OH has significant effects on shell formation. Finally, the final core-shell silica particles are modified by chemisorption of octadecanol at the surface to be dispersed in organic solvents. Octadecyl-coated silica particles are sterically stabilized in silica index-matching solvents such as chloroform and hexadecane to directly image separate particles using confocal microscopy. In chloroform, the organophilic silica particles disperse well, whereas in hexadecane they form a volume-filling gel structure at room temperature.     

Synthesis of spherical submicron-sized magnetite/silica nanocomposite particles

This paper describes a method for fabricating spherical submicron-sized silica particles that contained magnetite nanoparticles (magnetite/silica composite particles). The magnetite nanoparticles with a size of ca. 10 nm were prepared according to the Massart method, and were surface-modified with carboxyethylsilanetriol. The fabrication of magnetite/silica composite particles was performed in water/ethanol solution of tetraethoxyorthosilicate with ammonia catalyst in the presence of the surface-modified magnetite nanoparticles. The magnetite/silica composite particles with a size of ca. 100 nm were successfully prepared at 0.05 M TEOS, 15 M water, and 0.8 M ammonia with injection of the magnetite nanoparticle colloid at 2 min after the initiation of hydrolysis reaction of TEOS. Magnetite concentration in the composite particles could be raised to 17.3 wt.% by adjustment of the injected amount of the magnetite colloid, which brought about the saturation magnetization of 7.5 emu/g for the magnetite/silica composite particles.