ADSORPTION OF TANNIN ACID ONTO AN AMINATED MACROPOROUS RESIN FROM AQUEOUS SOLUTIONS

A macroporous polymeric adsorbent NG-8 was synthesized with divinylbenzene using conventional suspension polymerization technique.Its aminated product NG-9 was prepared by introducing tertiary amino groups into NG-8 for removal of tannin acid from aqueous solutions.NG-9 could be used directly without a wetting process and had higher adsorption capacity than NG-8,which might be attributed to the enhanced adsorbent-adsorbate interaction due to the tertiary amino groups on the polymeric matrix.The Langmuir equation was successfully employed to describe the adsorption process.The adsorption enthalpy change further validated the uptake of tannin acid on NG-9 to be an enhanced physical adsorption because of the Lewis acid-base interaction.In addition,adsorption kinetic studies testified that the tertiary amino groups on the polymer matrix could decrease the adsorption rate maybe for the hindrance of the tertiary amino groups and water clusters built up.     

Peptide and active ester formation by means of diaryl sulfites in pyridines

Peptides and active esters of amino acids were obtained under mild conditions by mixing sulfites with a mixture of carboxyl and amino or hydroxyl components in tertiary amines. Of several sulfites and tertiary amines examined, diphenyl sulphite and pyridine and 3- or 4-methylpyridines were most effective. The reaction mechanism is discussed.     

SORPTION OF PHENOL AND P-NITROPHENOL ONTO A WEAKLY ANION EXCHANGER： XPS ANALYSIS AND MECHANISM

X-ray photoelectron spectroscopy (XPS ) was adopted to elucidate sorption mechanism of phenol and p-nitrophenol onto a weakly anion exchanger D301. The distribution of specific forms of tertiary amino group on D301 was obtained and effect of free tertiary amino group on phenol sorption onto D301 was discussed. The result indicated that the percent of the protonated tertiary amine group on polymeric matrix was much lower than the reference compound N,N-dimethylbenzylamine at an identical pH value in solution due to the much lower activity degree of hydrogen ion in inner resin phase than in the external solution. Less free amino group on D301 results in less sorption capacity of phenol and p-nitrophenol in an acidic solution. Under the experimental conditions both phenol sorption onto D301 can be explained as solid extraction and the distribution coefficient varies linearly with the content of free amino group on D301.     

SORPTION OF PHENOL AND P-NITROPHENOL ONTO A WEAKLY ANION EXCHANGER: XPS ANALYSIS AND MECHANISM

1. INTRODUCTION Phenolic compounds are pollutants encountered frequently in water system. Some of them, such as phenol and p-nitrophenol, have been listed as priority pollutants in many countries. How to remove them completely from the polluted water is of significant concern to environmental scientists. Up to now many technologies such as biodegradation, oxidation and adsorption are available to remove phenolic compounds from the receiving water [1~4]. In the past two decadesphenol sorpt…     

Simple one-pot process for the bioresolution of tertiary amino ester protic ionic liquids using subtilisin

An efficient hydrolase-catalyzed bioresolution of tertiary amino ester protic ionic liquids has been demonstrated. Protic ionic liquids have been prepared in one step from the corresponding tertiary amino alcohols by treatment with butyric anhydride. After bioresolution, unreacted esters can be easily separated from the corresponding alcohols by extraction with hexane. Bioresolution of quinuclidin-3-yl butyrate has been performed with excellent selectivity.     

Preparation of planar chiral amino phenols based on the [2.2]paracyclophane backbone

The synthesis of various planar and central chiral secondary and tertiary amino phenols based on the [2.2]paracyclophane backbone is described. Planar chiral tertiary amino phenols are prepared by reductive amination of 5-formyl-4-hydroxy[2.2]paracyclophane (FHPC) with secondary amines. The reduction of imine and ketimine precursors, as well as the 1,2-addition to these compounds is also described.     

A Novel Thermosensitive Gel Adsorbent for Phosphate Ions

Summary: A novel thermosensitive gel adsorbent for phosphate ions was developed and its adsorption/desorption properties were investigated. The gel adsorbent was made by the copolymerization of N-isopropylacrylamide (NIPA) and N-[3-(dimethylamino)propyl]acrylamide (DMAPAA). The adsorbent has a volume phase transition temperature (VPTT), below which it becomes hydrophilic. The tertiary amino groups of DMAPAA were ionized and showed a cationic state when the gel swelled. Phosphate ions were adsorbed onto the ionized tertiary amino groups in the gel network below the VPTT and were desorbed above the VPTT because of the suppression of the ionization of the tertiary amino groups of gel and the shrinkage of the gel.     

pH and thermo responsive aliphatic tertiary amine chromophore hyperbranched poly(amino ether ester)s from oxa-Michael addition polymerization

In this research, we developed a novel and facile strategy to prepare aliphatic tertiary amine chromophore hyperbranched poly(amino ether ester)s with pH and thermo responsiveness via phosphazene base (t-BuP₂) catalyzed oxa-Michael addition polymerization of triethanolamine with ethylene glycol diacrylate at room temperature. UV–vis and fluorescence analyses results showed that the tertiary amine at branching point for hyperbranched poly(amino ether ester)s is very important to retain strong blue fluorescence of tertiary amine chromophore. Moreover, the hyperbranched poly(amino ether ester)s exhibit an aggregation caused quenching (ACQ) fluorescence, solvent induced red-shifted emission, molecular weight, and temperature dependent emission characters. More interestingly, the hyperbranched poly(amino ether ester)s show extreme acid induced quenching fluorescence phenomenon, and also display good water solubility, specific recognition of Fe³⁺ ion, low cytotoxicity, and bright cell imaging, which could serve as a microenvironment-responding fluorescent probe for application in chemical sensing, cell imaging, drug delivery, or disease diagnostics. This research provides a versatile method for the preparation of stimuli-responsive aliphatic tertiary amine chromophore polymers, and supplies ideas for researchers to explore other unconventional fluorescent polymers for application.     

A novel generation of coupling reagents. Enantiodifferentiating coupling reagents prepared in situ from 2-chloro-4,6-dimethoxy-1,3,5-triazine (CDMT) and chiral tertiary amines

Coupling of racemic N-protected amino acids with amino components by means of 2-chloro-4,6-dimethoxy-1,3,5-triazine (CDMT) in the presence of chiral tertiary amines such as strychnine, brucine, and sparteine proceeds enantioselectively, affording appropriate amides or dipeptides in 69-85% yield. The configuration of the preferred enantiomer and enantiomeric enrichment depend on the structures of the amine and carboxylic acid. Calculated Kagan enantioselectivity parameters (s) are in the range 1.6-195. Chiral triazinylammonium chlorides formed in situ from CDMT and chiral tertiary amines are postulated as reactive intermediates involved in the process of enantioselective activation of N-protected amino acids.     

Studies on reactions of the N-phosphonium salts of pyridines—VII : Preparation of peptides and active esters of amino acids by means of diphenyl and triphenyl phosphites in the presence of tertiary amines

Peptides and active esters of amino acids were produced in high yields from carboxyl and amino or hydroxyl components in pyridine with an equivalent amount of diphenyl phosphite or half an equivalent amount of triphenyl phosphite and tertiary amines. Condensation reactions competed with the reaction with a phenoxy group of the phosphite to produce the phenyl ester and were governed by the tertiary amine employed in the reaction. The reactions are assumed to proceed via the N- phosphonium salts of pyridines, similar to those obtained by the oxidation of phosphorus compounds with mercuric salts in pyridine.     

Aluminum-catalyzed asymmetric alkylations of pyridyl-substituted alkynyl ketones with dialkylzinc reagents

Alkylations of pyridyl-substituted ynones with Et2Zn and Me2Zn, promoted by amino acid-based chiral ligands in the presence of Al-based alkoxides, afford tertiary propargyl alcohols efficiently in 57% to >98% ee. Two easily accessible chiral ligands are identified as optimal for reactions of the two dialkylzinc reagents. Catalytic alkylations with Et2Zn require a chiral ligand carrying two amino acid moieties (valine and phenylalanine) along with a p-trifluoromethylphenylamide C-terminus. In contrast, reactions with Me2Zn are most effectively promoted in the presence of a chiral ligand containing a single amino acid (benzyl cysteine), capped by an n-butylamide. Enantiomerically enriched tertiary alcohols bearing a pyridyl and an alkyne substituent can be functionalized in a variety of manners to furnish a wide range of difficult-to-access acyclic and heterocyclic structures; two noteworthy examples are Cu-catalyzed protocols for conversion of tertiary propargyl alcohols to enantiomerically enriched tetrasubstituted allenes and bicyclic amides that bear an N-substituted quaternary carbon stereogenic center. Mechanistic models that account for the trends and enantioselectivity levels are provided.     

Preparation and Properties of the Emulsions of the Polysiloxane Material Modified with Tertiary Amino Side Chain

A series of the polysiloxane materials modified with tertiary amino groups were synthesized. FTIR, ¹H NMR were used to characterize the polysiloxane structure. The emulsions of the modified polysiloxanes are prepared. Some surface properties of the polysiloxane materials with tertiary amino groups as resins were discussed. The results show that the polysiloxane materials modified with tertiary amino side chains had good flexibility and the repellency to water. With increasing the amino value of the polysiloxanes, the flexibility of the fabrics treated with the emulsion was improved. After the samples treated with the polysiloxanes, the thermal yellowing of the polysiloxane had emerged. The whiteness of fabrics treated with the polysiloxane decreased. The K/S of the yellow fabrics treated with the modified polysiloxanes had not obvious change, the K/S of the red and blue fabrics treated with the modified polysiloxanes slightly decreased. The shapes of the reflectance spectra curves of the dyed fabrics treated without and with the modified polysiloxanes had not noticeable change.     

A common sequence-associated physicochemical feature for proteins of beta-trefoil family

Different amino acid sequences can fold into similar tertiary structures but the reasons for it are not very clear. It has been suggested in the literature that these sequences may have some common features associated with them but the exact nature of such shared properties remains largely unknown. We studied a representative sample of proteins from the beta-trefoil family and observed that their amino acid sequences, despite being considerably divergent from each other, can be accounted for by matching to a repetition of three physicochemically similar segments. This observation in turn is consistent with the three-fold pseudo-symmetry in tertiary structures of these proteins.     

Dehydrogenation of tertiary amines in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI TOF MS) analysis of various compounds synthesized in our laboratory, strong [M - H]+ ion peaks were often observed for the molecules with tertiary amino groups. In this work, the MALDI TOF MS behavior of two groups of compounds that incorporate tertiary amino moieties was investigated. One group is bisurea dimethylanilines (BUDMAs) prepared for the study of molecular recognition in thermoplastic elastomers, and the other group is the poly(propylene imine) diaminobutane dendrimers. The results clearly demonstrate the appearance of the [M - H]+ ions. In order to understand the possible mechanisms for the generation of these ions, a series of model compounds, ranging from primary to tertiary amines, were investigated. Unlike the tertiary amines, no [M - H]+ ion peaks were recorded for the primary amines, and only barely detectable ones, if any, for some secondary amines. It appears that the tertiary amino groups play an important role in the formation of these ions. In addition to MALDI TOF MS analysis, these samples were also applied to electrospray ionization (ESI) MS where no [M - H]+ ions were observed. The results indicate that the generation of [M - H]+ ion is due to the unique MALDI conditions and is likely to be formed via dehydrogenation of a protonated tertiary amine resulting in an N=C double bond. The absence of [M - H]+ ion peaks for the primary and secondary amines is probably because upon their formation these ions could easily transfer one proton to the corresponding amines in the MALDI gas-phase plume, yielding neutral imines that cannot be detected by MS.     

Copper/DIPEA-catalyzed, aldehyde-induced tandem decarboxylation-coupling of natural α-amino acids and phosphites or secondary phosphine oxides

A copper/DIPEA-catalyzed, aldehyde-induced intermolecular decarboxylative coupling reaction of natural α-amino acids and phosphites or secondary phosphine oxides was developed. In this process, a series of potentially useful ligands for organic synthesis and biologically important unnatural amino acid derivatives (tertiary amino phosphorus compounds) were obtained.     

Bispalladacycle‐Catalyzed Michael Addition of In Situ Formed Azlactones to Enones

The development and further evolution of the first catalytic asymmetric conjugate additions of azlactones as activated amino acid derivatives to enones is described. Whereas the first‐generation approach started from isolated azlactones, in the second‐generation approach the azlactones could be generated in situ starting from racemic N‐benzoylated amino acids. The third evolution stage could make use of racemic unprotected α‐amino acids to directly form highly enantioenriched and diastereomerically pure masked quaternary amino acid products bearing an additional tertiary stereocenter. The step‐economic transformations were accomplished by cooperative activation by using a robust planar chiral bis‐Pd catalyst, a Brønsted acid (HOAc or BzOH; Ac=acetyl, Bz=benzoyl), and a Brønsted base (NaOAc). In particular the second‐ and third‐generation approaches provide a rapid and divergent access to biologically interesting unnatural quaternary amino acid derivatives from inexpensive bulk chemicals. In that way highly enantioenriched acyclic α‐amino acids, α‐alkyl proline, and α‐alkyl pyroglutamic acid derivatives could be prepared in diastereomerically pure form. In addition, a unique way is presented to prepare diastereomerically pure bicyclic dipeptides in just two steps from unprotected tertiary α‐amino acids.     

Absolute asymmetric synthesis of tertiary α-amino acids

Frozen: the spontaneous crystallization of an achiral compound in a chiral conformation is used as the unique source of chirality in an absolute asymmetric synthesis of tertiary amino acids. The dynamic axial chirality of tertiary aromatic amides is frozen in a crystal and is responsible for the stereoselectivity of the deprotonation/alkylation. α-Amino acid derivatives are synthesized in up to 96 % ee.     

Unexpected reactions of [60]fullerene involving tertiary amines and insight into the reaction mechanisms

Thermal reactions of [60]fullerene with amino acid ester hydrochlorides and triethylamine in o-dichlorobenzene at reflux afforded pyrrolidinofullerene derivatives containing the CH(3)CH moiety and originating from triethylamine through an unusual C-N bond cleavage. Detailed investigation of these thermal reactions resulted in the discovery of unprecedented reactions between C(60) and tertiary amines and of reactions of C(60) with tertiary amines and aldehydes, giving cyclopentafullerene derivatives with high stereoselectivity. Plausible reaction mechanisms for the product formation involving the uncommon C-N bond cleavage of tertiary amines were proposed on the basis of extensive experimental results.     

Kinetic Resolution of Tertiary 2‐Alkoxycarboxamido‐Substituted Allylic Alcohols by Chiral Phosphoric Acid Catalyzed Intramolecular Transesterification

A highly enantioselective kinetic resolution of tertiary 2‐alkoxycarboxamido allylic alcohols has been achieved through a chiral phosphoric acid catalyzed intramolecular transesterification reaction. Both alkyl,aryl‐ and dialkyl‐substituted tertiary allylic alcohols were resolved with excellent efficiencies, affording both the recovered tertiary alcohols and the carbamate products with high enantioselectivities (with s factors up to 164.6). A gram‐scale reaction with 1 mol % catalyst loading and the facile conversion of the enantioenriched products into useful chiral building blocks, such as chiral oxazolidinones and β‐amino alcohols, demonstrate the value of this reaction.     

Regioselective reduction of 2-perfluoroalkanoylcyclohexane-1,3-diones and their enamino derivatives

Ionic hydrogenation of 2-perfluoroalkanoylcyclohexane-1,3-diones and their endocyclic enamino derivatives containing a secondary amino group by the action of triethylsilane in trifluoroacetic acid in the presence of a catalytic amount of lithium perchlorate involved regioselective reduction of the side-chain carbonyl group to hydroxy with formation of the corresponding hydroxy diketones and hydroxy amino ketones, respectively. Under analogous conditions endocyclic enamino derivatives possessing a tertiary amino group underwent deacylation to give enamino ketones.