ZrOCl2·8H2O as an efficient and recyclable catalyst for the clean synthesis of xanthenedione derivatives under solvent-free conditions

ZrOCl₂·8H₂O was found to be an efficient and recyclable catalyst for the reaction of aromatic aldehydes with dimedone to afford 1,8-dioxo-1,2,3,4,5,6,7,8-octahydroxanthenes under solvent-free conditions. Short reaction time, excellent yields and simple work-up are the advantages of this procedure. The interaction obtained from XRD studies was shown that the catalyst loses H₂O during the reaction but it did not affect catalytic activity of the catalyst and the catalyst could be reused several times.     

Efficient synthesis of xanthenedione derivatives using cesium salt of phosphotungstic acid as a heterogeneous and reusable catalyst in water

Cs_2.5H_0.5PW₁₂O₄₀ has been reported to be an efficient catalyst for the synthesis of 1,8-dioxo-octahydroxanthene from aldehydes and 1,3-cyclohexanedione/dimedone in water. This approach is environmentally benign with clean synthetic procedure, short reaction time, easy workup procedure, excellent yield, and regeneration of catalyst, which made this protocol efficient and safe.     

Eco‐friendly synthesis of 1,8‐dioxo‐octahydroxanthenes catalyzed by ionic liquid in aqueous media

A biodegradable functionalized ionic liquid 3‐(N,N‐dimethyldodecylammonium)propanesulfonic acid hydrogen sulfate ([DDPA][HSO₄]) was prepared and used as a Brønsted acid–surfactant‐combined catalyst for the eco‐friendly one‐pot synthesis of 1,8‐dioxo‐octahydroxanthenes at 100°C in water. Under these conditions, the reaction of various aromatic aldehydes with dimedone generated 1,8‐dioxo‐octahydroxanthenes in good yields with a simple postreaction procedure. The products could simply be separated from the catalyst/water system, and the catalyst could be reused at least six times without noticeably decreasing the catalytic activity. J. Heterocyclic Chem., (2011).     

Catalytic application of sulfonic acid‐functionalized titana‐coated magnetic nanoparticles for the preparation of 1,8‐dioxodecahydroacridines and 2,4,6‐triarylpyridines via anomeric‐based oxidation

We have developed green, efficient and powerful protocols for the preparation of 2,4,6‐triarylpyridines and 1,8‐dioxodecahydroacridines in the presence of Fe₃O₄@TiO₂@O₂PO₂(CH₂)₂NHSO₃H as a sulfonic acid‐functionalized titana‐coated magnetic nanoparticle catalyst under mild and solvent‐free reaction conditions. These protocols furnished the desired products in short reaction times with good to high yields (20–40 min and 80–86% in the case of 2,4,6‐triarylpyridines; 15–90 min and 80–93% in the case of 1,8‐dioxodecahydroacridines). The final step of the mechanistic route in the synthesis of 2,4,6‐triarylpyridines proceeds via an anomeric‐based oxidation. Also, the nanomagnetic core–shell catalyst can be recycled and reused in both cases of the scrutinized one‐pot multicomponent reactions with high turnover number and turnover frequency.     

CuO‐CeO2 Nanocomposite: A Highly Efficient Recyclable Catalyst for the Green Synthesis of 1,8‐Dioxooctahydroxanthenes in Water

CuO‐CeO₂ nanocomposite is reported as a highly efficient and recyclable catalyst for the green synthesis of 1,8‐dioxooctahydroxanthenes in water. This catalyst can be recovered by simple filtration and recycled up to 8 consecutive runs without any losing of its efficiency.     

Neat synthesis of octahydroxanthene-1,8-diones,catalyzed by silicotungstic acid as an efficient reusable inorganic catalyst

In this article, the first use of silicotungstic acid (H₄SiW₁₂O₄₀) as a catalyst for the synthesis of octahydroxanthene-1,8-diones by the reaction of 5,5-dimethylcyclohexane-1,3-dione (dimedone) with various aldehydes under thermal solvent-free conditions is described. The obtained results showed that the catalyst has a high catalytic activity, and the desired products were obtained in high yields. Moreover, the catalyst was found to be reusable, and a considerable catalytic activity still could be achieved after the fifth run. Easy work-up and avoidance of using harmful organic solvents are the other advantages of this simple procedure.     

Rice-husk-supported FeCl3 nano-particles: Introduction of a mild,efficient and reusable catalyst for some of the multi-component reactions

Rice-husk-supported FeCl₃ nano-particles (FeCl₃–RiH) were prepared and used as an environmentally friendly catalyst in the synthesis of β-amino carbonyl compounds, 1,8-dioxo-octahydro xanthenes, and bis-indolyl methanes from simple and readily available precursor molecules.     

Synthesis of 10‐amino‐9‐aryl‐2,3,4,5,6,7,9,10‐octahydroacridine‐1,8‐dione derivatives

A series of novel 10‐amino‐9‐aryl‐2,3,4,5,6,7,9,10‐octahydroacridine‐1,8‐dione derivatives 4 were synthesized by hydrazine or phenylhydrazine and 9‐aryl‐1,8‐dioxo‐2,3,4,5,6,7,9‐heptahydroxanthene derivatives 3 , which were prepared by 5‐substituted‐1,3‐cyclohexanedione 1 and aromatic aldehydes 2 in the presence of concentrated H₂SO₄ as a catalyst in water. The structures of all compounds were characterized by IR, MS, ¹H‐NMR, and elemental analysis, and the title compounds possess good fluorescence properties. J. Heterocyclic Chem., (2012).     

Synthesis of 1,8-dioxo-decahydroacridine derivatives using sulfonic acid functionalized silica (SiO2-Pr-SO3H) under solvent free conditions

Sulfonic acid functionlized silica (SiO₂-Pr-SO₃H) was found to be an efficient and recyclable solid acid catalyst in the synthesis of 1,8-dioxo-decahydroacridine derivatives under solvent free conditions. Short reaction time, excellent yields and simple work-up are the advantages of this procedure.     

Nanocrystalline TiO2, via green combustion synthesis,as an efficient and reusable catalyst for the preparation of 1,8‐dioxooctahydroxanthenes and 1,8‐dioxodecahydroacridines

Nanocrystalline TiO₂ is synthesized using a green combustion method and used as a recyclable catalyst for the one‐pot multicomponent synthesis of 1,8‐dioxodecahydroacridines and 1,8‐dioxooctahydroxanthenes, under solvent‐free conditions. This method is mild, environmentally friendly, inexpensive and highly effective for obtaining good to excellent yields of the products. Copyright © 2015 John Wiley & Sons, Ltd.     

Heterogeneous SO3H@Fe3O4 magnetic nanocatalyst as an efficient and reusable medium for the synthesis of 3,3′-(arylmethylene)-bis-(4-hydroxycoumarin), bis-(indolyl)-methane,and 1,8-dioxo-octahydroxanthene derivatives

This work aimed to synthesize a new heterogeneous catalyst (SO₃H@Fe₃O₄ magnetic nanoparticles) and the study of its catalytic behavior in synthesizing 3,3′-(arylmethylene)-bis-(4-hydroxycoumarin), bis-(indolyl)-methane, and 1,8-dioxo-octahydroxanthene derivatives. The characterization of obtained material has been performed by means of Fourier-transform infrared spectroscopy, thermogravimetric analysis, X-ray diffraction, vibrating sample magnetometer, and transmission electron microscopy. The main properties of this new methodology, compared to earlier ones, are the short times of reaction, mild reaction conditions, simple recovery of the catalyst by permanent magnetic field, excellent yields, and reusability of the catalyst for a minimum of six runs.     

Phospho sulfonic acid as efficient heterogeneous Brønsted acidic catalyst for one-pot synthesis of 14<Emphasis Type="Italic">H</Emphasis>-dibenzo[<Emphasis Type="Italic">a,j</Emphasis>]xanthenes and 1,8-dioxo-octahydro-xanthenes

A simple, efficient procedure for the preparation of phospho sulfonic acid PO(OSO₃H)₃ as a Brønsted acidic and recoverable heterogeneous catalyst is described, used for the one-pot synthesis of aryl-14H-dibenzo[a,j]xanthenes and 1,8-dioxo-octahydro-xanthenes. A cost-effective, simple and convenient procedure for the synthesis of aryl-14H-dibenzo[a,j]xanthenes was developed via a one-pot condensation from substituted benzaldehydes and β-naphthol under solvent-free conditions. The one-pot condensation of substituted benzaldehydes and 5,5-dimethyl-1,3-cyclohexanedione (dimedone) under solvent-free conditions leads to 1,8-dioxo-octahydro-xanthenes. These protocols afford a number of advantages, such as: excellent yields, very short reaction times, easy procedure, simple methodology and ease of preparation and regeneration of the catalyst.     

ZrOCl2·8H2O: a highly efficient catalyst for the synthesis of 1,8‐dioxo‐octahydroxanthene derivatives under solvent‐free conditions

ZrOCl₂·8H₂O has been found to be an efficient catalyst for the synthesis of 1,8‐dioxo‐octahydroxanthenes from aldehydes and 5,5‐dimethylcyclohexane‐1,3‐dione under solvent‐free conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel CuFe2O4@SiO2‐OP2O5H magnetic nanoparticles: Preparation,characterization and first catalytic application to the synthesis of 1,8‐dioxo‐octahydroxanthenes

New functionalized magnetic core–shell nanoparticles, CuFe₂O₄@SiO₂‐OP₂O₅H, were prepared by grafting of phosphorus pentoxide on CuFe₂O₄@SiO₂ nanoparticles and characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma optical emission spectrometry and vibrating sample magnetometry. The catalytic activity of CuFe₂O₄@SiO₂‐OP₂O₅H as a novel catalyst was evaluated in the synthesis of 1,8‐dioxo‐octahydroxanthenes under solvent‐free conditions. The results showed that the catalyst has high activity and the desired products are obtained in high yields within short reaction times. The catalyst is readily recovered using magnetic decantation and can be used at least four times without noticeable deterioration in catalytic activity.     

Green Synthesis of 1,8-Dioxo-octahydroxanthene Derivatives Using Catalytic Amount of H2SO4 in Water

An green and convenient approach to the synthesis of 3,6,9-aryl-1,8-dioxo-1,2,3,4,5,6,7,8-octahydroxanthene derivatives from appropriate aromatic aldehydes and 5-aryl-1,3-cyclo-hexanedione in the presence of two drops of concentrated H₂SO₄ as a catalyst in water is described. This method provides several advantages such as environmental friendliness, low cost, excellent yields, and simple workup procedure.     

Mild and Efficient Synthesis of 1,8‐Naphthalide and 1,8‐Naphthalenedimethanol

Abstract

Mild and efficient procedures have been developed for synthesis of 1,8‐naphthalide and 1,8‐naphthalenedimethanol. In an ice‐water bath, 1,8‐naphthalide was prepared from 1,8‐naphthlic anhydride using LiAlH₄ as reducing agent. 1,8‐Naphthalenedimethanol was obtained with good yield from reduction of 1,8‐naphthalic anhydride by LiAlH₄ and Lewis acids at room temperature. The effects of various factors on the reduction of 1,8‐naphthalic anhydride with LiAlH₄ were investigated.     

Reaction in Dry Media: Silica Gel Supported Ferric Chloride Catalyzed Synthesis of 1,8-Dioxo-octahydroxanthene Derivatives

Herein, we describe a green procedure for the one-pot preparation of 1,8-dioxo-octahydroxanthene derivatives by condensation of dimedone and substituted benzaldehydes in the presence of FeCl ₃ -SiO ₂ as an efficient and heterogeneous catalyst under microwave irradiation and thermal conditions. This method has the advantages of high yields, cleaner reactions, efficient and cost-effective method, simple methodology, short reaction times, easy workup, and greener conditions.     

Amino acids/superbases as eco-friendly catalyst system for the synthesis of cyclic carbonates under metal-free and halide-free conditions

An eco-friendly and efficient binary catalyst system of superbases and amino acids was developed for the synthesis of cyclic carbonates from epoxides and CO₂ under metal-free and halide-free conditions. Among the various amino acids and superbases systems tested, the L-histidine/1,8-diazabicyclo[5.4.0]-undec-7-ene (DBU) system achieved the highest conversion of propylene oxide and selectivity of propylene carbonate. The effect of various reaction parameters was evaluated. A possible catalyst mechanism for L-histidine synergized with DBU in the ring opening of epoxide and DBU introduced CO₂ activation. The process herein represents a green, simple, and cost-effective route for the chemical fixation of CO₂ into cyclic carbonates.     

Cyclometalated Ir–Sn Construct for Cyanosilylation

Two cyclometalated compounds [Ir^IIICl{(2-biphenylene-1,8-naphthyridine-??C,N}(?? ⁵-pentamethylcyclopentadienyl)] (1) and [Ir^IIICl{(2-(2-N-Methyl-pyrrolyl-1,8-naphthyridine-??C,N}(?? ⁵-pentamethylcyclopentadienyl)] (2) containing naphthyridine based ligands have been synthesized in high yield. Insertion of SnCl₂ to a terminal Ir?CCl bond of 1 affords the mixed Ir?CSnCl₃ compound [Ir^IIISnCl₃{(2-biphenylene-1,8-naphthyridine-??C,N}(?? ⁵-pentamethylcyclopentadienyl)] (3). The heterobimetallic compound 3 is shown to be an excellent catalyst for a variety of cyanosilylation reactions. A cooperative mechanism has been proposed which involves the simultaneous activation of aldehyde and cyanide precursor by Sn and unbound naphthyridine nitrogen.     

离子液体中NaHSO4催化芳香醛与1,3-环己二酮的缩合反应

以NaHSO₄为催化剂, 在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)介质中, 由芳香醛与1,3-环己二酮衍生物制备了9-芳基-2,3,4,5,6,7-六氢-2H-氧杂蒽-1,8-二酮衍生物. 在沸水浴中反应1～2 h, 产率达81.2%～93.0%. 该方法反应时间短, 产率高, 催化剂价廉易得, 而且对环境友好.