UV光引发表面接枝两性离子水凝胶层的制备及抗细菌黏附性能

采用聚合和交联的SiO₂有机/无机杂化溶胶作为基材, 通过与两性离子单体层之间的过渡层, 在紫外光作用下引发杂化溶胶和两性离子单体溶液中的双键反应, 使生成的杂化层在基材和表面的两性离子聚合物之间形成辅助性黏接作用, 从而在基材表面构筑两性离子水凝胶层. 通过傅里叶红外光谱(FTIR)、 原子力显微镜(AFM)和接触角测试等方法对所制备的两性离子水凝胶层和杂化层的表面进行了表征. 以空白玻璃片为对照样品, 以金黄色葡萄球菌和大肠杆菌为试验菌, 研究了用两性离子凝胶层修饰的玻璃表面的抗细菌黏附性能. 结果表明, 在SiO₂杂化过渡层中引入线型-Si-(CH₂)₂-O-链段可有效提高杂化过渡层对基材的附着力, 并改善其柔韧性. 与对照样品相比, 用两性离子凝胶层修饰的玻璃表面具有优异的抗菌黏附性能.     

Bacterial capture efficiency and antimicrobial activity of phage-functionalized model surfaces

The rise of antibiotic-resistant bacteria has directed substantial attention toward the use of bacteriophages as a means to control bacterial populations. It has been proposed that bacteriophages can be applied as a coating on surfaces in healthcare settings or on indwelling medical devices to create an antimicrobial surface. In this study, antimicrobial model surfaces functionalized with five different types of bacteriophage were prepared and characterized with X-ray photoelectron spectroscopy and atomic force microscopy. The bacterial capture efficiency of these functionalized surfaces was studied for two common bacteria, Escherichia coli and Salmonella typhimurium. Binding of the phages to a solid surface affected their biofunctionality as expressed by the capture efficiency and rate of host membrane disruption. Moreover, the size and shape of the bacteriophage and positioning of its specific binding proteins significantly affected its bacterial capture capability in the immobilized state. Symmetric bacteriophages were found to be a better choice for antibacterial surfaces compared to more asymmetric tailed bacteriophages. Immobilized phages were found to disrupt the membranes of attached bacteria and are thus proposed as a candidate for antimicrobial surfaces.     

Dual‐Functional Dextran‐PEG Hydrogel as an Antimicrobial Biomedical Material

Microbial infections continually present a major worldwide public healthcare threat, particularly in instances of impaired wound healing and biomedical implant fouling. The development of new materials with the desired antimicrobial property to avoid and treat wound infection is urgently needed in wound care management. This study reports a novel dual‐functional biodegradable dextran‐poly(ethylene glycol) (PEG) hydrogel covalently conjugated with antibacterial Polymyxin B and Vancomycin (Vanco). The hydrogel is designed as a specialized wound dressing that eradicates existing bacteria and inhibits further bacteria growth, while, ameliorating the side effects of antibiotics and accelerating tissue repair and regeneration. The hydrogel exhibits potent antibacterial activities against both gram‐negative bacteria Escherichia coli (E. coli) and gram‐positive bacteria Staphylococcus aureus (S. aureus) with no observable toxicity to mouse fibroblast cell line NIH 3T3. These results demonstrate the immense potential of dextran‐PEG hydrogel as a wound dressing healthcare material in efficiently controlling bacteria growth in complex biological systems.     

The influence of cold treatment on properties of temperature-sensitive poly(N-isopropylacrylamide) hydrogels

Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel exhibits a response to external temperature variation and shrinks in volume abruptly as the temperature is increased above its lower critical solution temperature. It has great potential applications in biomedical fields. A rapid response rate is essential, especially when this material is designed as an on-off switch for targeted drug delivery. However, due to the appearance of a thick, dense skin layer on the hydrogel surface during the shrinking process, the deswelling rate of conventional PNIPAAm gels is low. In this article, a novel method is proposed to modify the surface morphology of PNIPAAm gel, in which the swollen gels are frozen at low temperature (-20 degrees C). The scanning electron micrographs revealed that a fishnet-like skin layer appeared on the surfaces of the cold-treated gels. Dramatically rapid deswelling was achieved with the cold-treated gels since the fishnet-like structure with numerous small pores prevented the formation of a dense, thick skin layer during the deswelling process, which commonly occurs in normal PNIPAAm hydrogels. Prolonging the cold treatment from 1 day to 10 days resulted in a slightly higher deswelling rate. Rearrangement of the hydrogel matrix structure during the freezing process might contribute to the formation of the fishnet-like skin layer. The water uptake of the hydrogels increased nearly in proportion to the square root of time, indicating that the reswelling rate of hydrogels was controlled predominantly by water diffusion into the network. However, there were no significant differences in the equilibrated swelling ratio and reswelling kinetics at room temperature (22 degrees C) between normal gels and cold-treated gels, which implied that cold treatment did not change bulk porosity and gel tortuosity much.     

Porous Microstructured Surfaces with pH‐Triggered Antibacterial Properties

New antibacterial films are designed with the capability to reversibly regulate their killing and repelling functions in response to variations in environmental pH. These systems consist of porous polystyrene surfaces as the main components and a copolymer bearing pH‐sensitive thiazole and triazole groups as the minor components. These pH‐sensitive groups, located on the surfaces, can be partially protonated at acidic pH levels, increasing the positive charge density of the surfaces and their antibacterial activity. Similarly, their bacterial adhesion and killing efficiencies in response to changes in pH are evaluated by analyzing the bacterial viability of Staphylococcus aureus bacteria on the surfaces under acidic and neutral pH values. It is demonstrated that after only 1 h of incubation with the bacterial suspension in acidic conditions, the surfaces killed the bacteria, while at pH = 7.4, some of the adhered bacteria are removed. Furthermore, the surface topography exerts an important role by intensifying this response.     

Mxene-Based Supramolecular Composite Hydrogels for Antioxidant and Photothermal Antibacterial Activities

Bacterial infections and oxidative damage caused by various reactive oxygen species (ROS) pose a significant threat to human health. It is highly desirable to find an ideal biomaterial system with broad spectrum antibacterial and antioxidant capabilities. A new supramolecular antibacterial and antioxidant composite hydrogel made of chiral L-phenylalanine-derivative (LPFEG) as matrix and Mxene (Ti₃C₂T_x) as filler material is presented. The noncovalent interactions (H-bonding and π–π interactions) in between LPFEG and Mxene and the inversion of LPFEG chirality are verified by Fourier transform infrared and circular dichroism spectroscopy. The composite hydrogels show improved mechanical properties revealed by rheological analysis. The composite hydrogel system exhibits photothermal conversion efficiency (40.79%), which enables effective photothermal broad-spectrum antibacterial activities against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli, Pseudomonas aeruginosa) bacteria. Furthermore, the Mxene also enables the composite hydrogel to exhibit excellent antioxidant activity by efficiently scavenging free radicals like DPPH•, ABTS•+, and •OH. These results indicate that the Mxene-based chiral supramolecular composite hydrogel, with improved rheological, antibacterial, and antioxidant properties has a great potential for biomedical applications.     

O‐Mannosylation Affords a Glycopeptide Hydrogel with Inherent Antibacterial Activities against E. coli via Multivalent Interactions between Lectins and Supramolecular Assemblies

Multivalent carbohydrate–lectin interactions play a crucial role in bacterial infection. Biomimicry of multivalent glycosystems represents a major strategy in the repression of bacterial growth. In this study, a new kind of glycopeptide (Naphthyl‐Phe‐Phe‐Ser‐Tyr, NMY) scaffold with mannose modification is designed and synthesized, which is able to perform supramolecular self‐assembly with the assistance of catalytic enzyme, and present multiple mannose ligands on its self‐assembled structure to target mannose‐binding proteins. Relying on multivalent carbohydrate–lectin interactions, the glycopeptide hydrogel is able to bind Escherichia coli (E. coli) in high specificity, and result in bacterial adhesion, membrane disruption and subsequent cell death. In vivo wound healing assays reveal that this glycopeptide hydrogel exhibits considerable potentials for promoting wound healing and preventing E. coli infection in a full‐thickness skin defect mouse model. Therefore, through a specific mannose–lectin interaction, a biocompatible hydrogel with inherent antibacterial activity against E. coli is achieved without the need to resort to antibiotic or antimicrobial agent treatment, highlighting the potential role of sugar‐coated nanomaterials in wound healing and control of bacterial pathogenesis.     

Self-Assembled Supramolecular Hybrid Hydrogel Beads Loaded with Silver Nanoparticles for Antimicrobial Applications

This Full Paper reports the formation of silver (Ag) NPs within spatially resolved two-component hydrogel beads, which combine a low-molecular-weight gelator (LMWG) DBS-CONHNH₂ and a polymer gelator (PG) calcium alginate. The AgNPs are formed through in situ reduction of Ag^I, with the resulting nanoparticle-loaded gels being characterised in detail. The antibacterial activity of the nanocomposite gel beads was tested against two drug-resistant bacterial strains, often associated with hospital-acquired infections: vancomycin-resistant Enterococcus faecium (VRE) and Pseudomonas aeruginosa (PA14), and the AgNP-loaded gels showed good antimicrobial properties against both types of bacteria. It is suggested that the gel bead format of these AgNP-loaded hybrid hydrogels makes them promising versatile materials for potential applications in orthopaedics or wound healing.     

Bacterial adhesion inhibition of the quaternary ammonium functionalized silica nanoparticles

Quaternary ammonium compounds have been considered as excellent antibacterial agents due to their effective biocidal activity, long term durability and environmentally friendly performance. In this work, 3-(trimethoxysilyl)-propyldimethyloctadecylammonium chloride as a quaternary ammonium silane was applied for the surface modification of silica nanoparticles. The quaternary ammonium silane provided silica surface with hydrophobicity and antibacterial properties. In addition, the glass surface which was coated with the surface modified silica nanoparticles presented bacterial growth inhibition activity. For comparison of bacterial growth resistance, hydrophobic silane (alkyl functionalized silane) modified silica nanoparticles and pristine silica nanoparticles were prepared. As a result of bacterial adhesion test, the quaternary ammonium functionalized silica nanoparticles exhibited the enhanced inhibition performance against growth of Gram-negative Escherichia coli (96.6%), Gram-positive Staphylococcus aureus (98.5%) and Deinococcus geothermalis (99.6%) compared to pristine silica nanoparticles. These bacteria resistances also were stronger than that of hydrophobically modified silica nanoparticles. It could be explained that the improved bacteria inhibition performance originated from the synergistic effect of hydrophobicity and antibacterial property of quaternary ammonium silane. Additionally, the antimicrobial efficacy of the fabricated nanoparticles increased with decreasing size of the nanoparticles.     

Aggregation-induced emission-active antibacterial hydrogel with self-indicating ability for real-time monitoring of drug release process

Although antibacterial hydrogels are emerging as promising biomaterials for effective inhibition of bacterial infections, monitoring their dynamic release behaviors in a visual manner remains greatly challenging. Herein, non-conjugated luminescent polymers (NCLPs) with aggregation-induced emission (AIE) characteristics are used for the first time to develop a visualization strategy to monitor the release process of the drug-loaded hydrogel. The novel antimicrobial peptide polymers with intrinsic AIE effect, namely nanoengineered peptide-grafted hyperbranched polymers (NPGHPs), are encapsulated in an anionic polyelectrolyte to construct the AIE-active fluorescent polymeric hydrogel (NPGHPs/SA gel). Interestingly, the rigid environment mediated by hydrogen bonding and electrostatic interaction contributes to promoting the unconventional luminescence of fluorescent clusters. Moreover, the successive drug release process of NPGHPs/SA gel can be tracked in real time by using fluorescence microscopy. The hydrogel also has potent antibacterial activities against Gram-negative bacteria (E. coli, P. aeruginosa) and Gram-positive bacteria (S. aureus, B. subtilis). Overall, this work not only provides an advanced biomedical material with broad-spectrum antibacterial ability but also opens a facile avenue up for the investigation of drug release from gel systems.     

Surface-controlled spatially heterogeneous physical properties of a supramolecular gel with homogeneous chemical composition

Controlling supramolecular self-assembly across multiple length scales to prepare gels with localised properties is challenging. Most strategies concentrate on fabricating gels with heterogeneous components, where localised properties are generated by the stimuli-responsive component. Here, as an alternative approach, we use a spiropyran-modified surface that can be patterned with light. We show that light-induced differences in surface chemistry can direct the bulk assembly of a low molecular weight gelator, 2-NapAV, meaning that mechanical gel properties can be controlled by the surface on which the gel is grown. Using grazing incidence X-ray diffraction and grazing incidence small angle X-ray scattering, we demonstrate that the origin of the different gel properties relates to differences in the architectures of the gels. This provides a new method to prepare a single domain (i.e., chemically homogeneous) hydrogel with locally controlled (i.e., mechanically heterogeneous) properties.

A mechanical pattern is created in a hydrogel film by pre-patterning the underlying surface chemistry. This allows spatial variation of the viscous component of the gel, controlling dissipative forces in the gel film without altering gel chemistry.     

Antibacterial,Adhesive, and Conductive Hydrogel for Diabetic Wound Healing

Diabetic mellitus is one of the leading causes of chronic wounds and remains a challenging issue to be resolved. Herein, a hydrogel with conformal tissue adhesivity, skin-like conductivity, robust mechanical characteristics, as well as active antibacterial function is developed. In this hydrogel, silver nanoparticles decorated polypyrrole nanotubes (AgPPy) and cobalt ions (Co²⁺) are introduced into an in situ polymerized poly(acrylic acid) (PAA) and branched poly(ethylenimine) (PEI) network (PPCA hydrogel). The PPCA hydrogel provides active antibacterial function through synergic effects from protonated PEI and AgPPy nanotubes, with a tissue-like mechanical property (≈16.8 ± 4.5 kPa) and skin-like electrical conductivity (≈0.048 S m⁻¹). The tensile and shear adhesive strength (≈15.88 and ≈12.76 kPa, respectively) of the PPCA hydrogel is about two- to threefold better than that of fibrin glue. In vitro studies show the PPCA hydrogel is highly effective against both gram-positive and gram-negative bacteria. In vivo results demonstrate that the PPCA hydrogel promotes diabetic wounds with accelerated healing, with notable inflammatory reduction and prominent angiogenesis regeneration. These results suggest the PPCA hydrogel provide a promising approach to promote diabetic wound healing.     

A Facile Strategy to Construct Anti-Swelling,Antibacterial, and Antifogging Coatings for Protection of Medical Goggles

During the COVID-19 (Corona Virus Disease 2019) pandemic, traditional medical goggles are not only easy to attach bacteria and viruses in long-term exposure, but easy to fogged up, which increases the risk of infection and affects productivity. Bacterial adhesion and fog can be significantly inhibited through the hydrogel coatings, owing to super hydrophilic properties. On the one hand, hydrogel coatings are easy to absorb water and swell in wet environment, resulting in reduced mechanical properties, even peeling off. On the other hand, the hydrogel coatings don't have intrinsic antibacterial properties, which still poses a potential risk of bacterial transmission. Herein, an anti-swelling and antibacterial hydrogel coating is synthesized by 2-hydroxyethyl methacrylate (HEMA), acrylamide (AM), dimethylaminoethyl acrylate bromoethane (IL-Br), and poly(sodium-p-styrenesulfonate) (PSS). Due to the self-driven entropy reduction effect of polycation and polyanion, an ion cross-linking network is formed, which endows the hydrogel coating with excellent antiswelling performance. Moreover, because of the synergistic effect of highly hydrated surfaces and the active bactericidal effect from quaternary ammonium cations, the hydrogel coating exhibits outstanding antifouling performances. This work develops a facile strategy to fabricate anti-swelling, antifouling, and antifogging hydrogel coatings for the protection of medical goggles, and also for biomedical and marine antifouling fields.     

基于正电荷和光热协同效应的新型半导体聚合物纳米抗菌材料

由于抗生素的不当使用和细菌多药耐药的出现, 迫切需要开发新的抗菌剂. 本文制备了具有光热转换性能的正电荷半导体高分子材料及具有协同抗菌活性的半导体聚合物纳米粒子(SP-PPh₃ NPs). SP-PPh₃ NPs的光热转化效率为43.8%. 带正电荷的SP-PPh₃ NPs可以附着在细菌上, 有助于将热量有效传递给细菌. 在热和正电荷的协同作用下, SP-PPh₃ NPs对革兰氏阴性大肠杆菌(E. coli)和革兰氏阳性金黄色葡萄球菌(S. aureus)均具有抗菌活性, 其对二者的体外抑菌率分别为99.9%和98.6%. 此外, SP-PPh₃ NPs具有良好的生物相容性, 对小鼠的主要器官几乎无副作用. 对细菌感染的小鼠皮肤伤口用SP-PPh₃ NPs治疗12 d后, 伤口可以很好地愈合.     

Impact of polymeric films and hydrogels: Physical characteristics on bacterial growth

Hydrogels find diverse applications in manipulating bacteria, and serving purposes like elevation, maintenance, and elimination. Several factors of hydrogel have been studied in the benefits of antibacterial activity. Factors such as hydrogel stiffness and roughness gain significance in surface coating, influencing bacterial behavior. However, the intricate interplay of hydrogel stiffness, roughness, polymer types, and bacterial species necessitates further exploration. The choice of polymer is dictated by the specific objectives, particularly in antibacterial scenarios where polymers with positive charge, hydrophilicity, and acidity prove effective. These properties induce robust electrostatic and hydrophobic/hydrophilic interactions, along with pH-induced cell membrane damage, collectively contributing to hindered bacterial adhesion and growth. Additionally, extracellular polymeric substances (EPS) emerge as pivotal influencers in bacterial adhesion and proliferation. EPS production alters bacterial surfaces, fostering connections between bacteria and facilitating biofilm formation. The hydrophobic nature of EPS further complicates bacterial interactions with surface materials, emphasizing the nuanced interplay of hydrophilic and hydrophobic forces in bacterial adhesion. Herein, this work article has reviewed the related study of each physical property related to antibacterial property on the surface of the hydrogel. Moreover, this work also illustrates applications of the antibacterial properties of hydrogel for medical and surface treatment, including wound healing, food packaging, and surface coating. Additionally, the bacteria growing on hydrogel for engineered living materials, have been updated in various applications.     

新型吡唑Schiff碱及金属配合物的合成和抑菌活性

以3-氨基-4-氰基吡唑和芳醛为原料合成了10个新型吡唑Schiff碱及铜(II)、镍(II)、锌(II)、钴(II) 4个金属配合物. 用元素分析, IR, 1H NMR及单晶解析表征了Schiff碱及金属配合物的结构. 测定了Schiff碱及金属配合物对金黄色葡萄球菌、大肠杆菌、枯草杆菌和绿脓杆菌的抑菌活性. 生物活性研究表明, Schiff碱及金属配合物对金黄色葡萄球菌、大肠杆菌和绿脓杆菌都有较好的抑菌效果, 其中铜(II)和锌(II)配合物对金黄色葡萄球菌和大肠杆菌的抑菌活性最好.     

Facile preparation of antibacterial polymer coatings via thiol-yne click photopolymerization

Novel antibacterial polymer coatings were prepared by a facile thiol-yne click photopolymerization of 1-propargyl-3-alkyl-1,3-diazanyl-2,4-cyclopentadiene bromide ([PAIM]Br) and tetra(3-mercapto-propionate) pentaerythritol (PETMP) (2:1 molar ratio) using 2,2-dimethoxy-2-phenylacetophenone (DMPA) as initiator. The antibacterial activity of the coatings was tested against Staphylococcus aureus (ATCC 292130) and Escherichia coli (ATCC 25922) by the dynamic shake method. The evaluation results revealed the antibacterial polymer coatings exhibited excellent inhibitory activity against S. aureus and E. coli, especially for S. aureus.     

Chemotactic ion-releasing hydrogel for synergistic antibacterial and bone regeneration

The repair of critical-sized bone defects remains a major concern in clinical care. Herein, a multifunctional hydrogel is rationally designed to synergistically photothermal antibacterial and potentiate bone regeneration via adding magnesium oxide nanoparticle and black phosphorus nanosheet (BPNS) into poly(vinyl alcohol)/chitosan hydrogel (PVA/CS-MgO-BPNS). Under the dual effect of near-infrared irradiation and CS intrinsic antibacterial properties, PVA/CS-MgO-BPNS hydrogel can kill more than 99.9% of Staphylococcus aureus and Escherichia coli. The released Mg ions stimulate the migration of mesenchymal stem cells (MSCs) to hydrogels and synergize with released phosphate to promote osteogenic differentiation. The PVA/CS-MgO-BPNS hydrogel also promotes calcium phosphate particle formation and therefore improves the biomineralization ability. Furthermore, the potential molecular mechanism of PVA/CS-MgO-BPNS to regulate MSCs migration and differentiation is through activating phosphoinositide 3-kinase (PI3K)-Akt signaling pathways through RNA-seq analysis. Finally, the PVA/CS-MgO-BPNS hydrogel could significantly promote endogenous bone tissue regeneration in the rat skull defect model. Taken together, this easy fabricated multifunctional hydrogel has good clinical applicability for the repair of large-scale bone defects.     

纳米氧化锡/偕胺肟复合纤维的制备及其抑菌性能

以纳米氧化锡为添加粒子,与偕胺肟化处理后的聚丙烯腈纤维反应,制得纳米氧化锡/偕胺肟复合纤维(1),其结构及形貌经XRD, SEM和EDX表征。并研究了1对大肠杆菌和金黄色葡萄球菌的抑菌性能。结果表明：在纤维表面生成了四方晶系的纳米氧化锡,1对受试菌种具有良好的抑菌性能。     

Bioactive Phenylboronic Acid-Functionalized Hyaluronic Acid Hydrogels Induce Chondro-Aggregates and Promote Chondrocyte Phenotype

Hydrogels are extensively investigated as biomimetic extracellular matrix (ECM) scaffolds in tissue engineering. The physiological properties of ECM affect cellular behaviors, which is an inspiration for cell-based therapies. Photocurable hyaluronic acid (HA) hydrogel (AHAMA-PBA) modified with 3-aminophenylboronic acid, sodium periodate, and methacrylic anhydride simultaneously is constructed in this study. Chondrocytes are then cultured on the surface of the hydrogels to evaluate the effect of the physicochemical properties of the hydrogels on modulating cellular behaviors. Cell viability assays demonstrate that the hydrogel is non-toxic to chondrocytes. The existence of phenylboronic acid (PBA) moieties enhances the interaction of chondrocytes and hydrogel, promoting cell adhesion and aggregation through filopodia. RT-PCR indicates that the gene expression levels of type II collagen, Aggrecan, and Sox9 are significantly up-regulated in chondrocytes cultured on hydrogels. Moreover, the mechanical properties of the hydrogels have a significant effect on the cell phenotype, with soft gels (≈2 kPa) promoting chondrocytes to exhibit a hyaline phenotype. Overall, PBA-functionalized HA hydrogel with low stiffness exhibits the best effect on promoting the chondrocyte phenotype, which is a promising biomaterial for cartilage regeneration.