Aqueous synthesis of alkanethiolate-protected Ag nanoparticles using Bunte salts

The one-pot synthesis of monolayer-protected metal nanoparticles derived from sodium S-dodecylthiosulfate (Bunte salt) in aqueous solution is described. Silver nanoparticles, which were produced by the borohydride reduction of silver nitrate in H2O, were stabilized by the adsorption of S-dodecylthiosulfate followed by the removal of the SO3- moiety. Temporary stabilization of silver sols by the adsorption of borohydride and borate prevented aggregation of silver nanoparticles in H2O. The syntheses of other metal nanoparticles, including gold, copper, and palladium particles in H2O, were less successful. Gold and copper particles were completely aggregated and precipitated out immediately after the addition of NaBH4, yielding only insoluble clusters. Stable and soluble palladium nanoparticle could be prepared, but the presence of Pd-thiolate complex was also observed. These nanoparticles were characterized using 1H NMR, UV-vis spectroscopy, FT-IR spectroscopy, and transmission electron microscopy.     

Identification of acidic phosphorus-containing ligands involved in the surface chemistry of CdSe nanoparticles prepared in tri-N-octylphosphine oxide solvents

The surface ligand composition of CdSe nanoparticles prepared using technical grade tri-n-octylphosphine oxide (TOPO) was investigated using a nucleophilic ligand displacement methodology and (31)P {(1)H} NMR spectroscopy. 4-(N,N-Dimethylamino)pyridine (DMAP) and benzyltrimethylammonium propionate were added to tetrahydrofuran solutions of CdSe nanoparticles prepared in technical grade TOPO. DMAP was shown to be a sufficiently strong nucleophile to displace the more weakly coordinating ligands, TOPO, TOPSe, di-n-octylphosphinate, and n-octylphosphonate (OPA). Benzyltrimethylammonium propionate was shown to be a stronger nucleophile than DMAP in that it could displace all the aforementioned surface-bound ligands as well as a previously unidentified surface-bound phosphorus species. Independent synthesis and (31)P {(1)H} NMR spectral matching confirmed that the new species was P,P'-(di-n-octyl) dihydrogen pyrophosphonic acid (PPA). The PPA was shown to form during the nanoparticle synthesis via the dehydrative condensation of OPA. CdSe nanoparticle syntheses were performed using pure TOPO and added OPA, and subsequent displacement experiments showed that OPA and PPA were the predominant surface-bound ligands. CdSe nanoparticle syntheses were performed using pure TOPO and added PPA, and subsequent displacement experiments showed that PPA was the predominant surface-bound ligand. PPA was also shown to have the greatest affinity for the nanoparticle surface of all the ligands investigated. Thus, a model for the surface ligand composition could be developed for nanoparticles prepared using technical grade TOPO or other high-boiling solvents with added acidic phosphorus compounds.     

Preparation of palladium nanoparticles–titanium electrodes as a new anode for direct methanol fuel cells

Pd nanoparticle/Ti electrodes are prepared by electroless plating of palladium on titanium plates. The morphology and surface analysis of Pd nanoparticle/Ti electrodes are investigated using scanning electron microscopy and energy-dispersive X-ray spectroscopy, respectively. The results indicate that palladium nanoparticles are homogeneously deposited on the surface of titanium plates. The electro-catalytic activity of Pd nanoparticle/Ti electrodes in the methanol electro-oxidation is studied by cyclic voltammetry and chronoamperometry methods. The results show that the electro-catalytic oxidation of methanol on the Pd nanoparticle/Ti electrode improved compare to pure palladium electrode and confirmed the better electro-catalytic activity and stability of these new electrodes.     

纳米2,4-二羟基苯甲酸铅(Ⅱ)配合物的合成及其燃烧催化性能研究

采用液相分散沉淀法制备了纳米2,4-二羟基苯甲酸-Pb(Ⅱ)配合物粉体,并用TG,XRD,TEM,IR和元素分析对产物进行了表征.研究了反应条件对产物粒径和粒子形貌的影响.用DSC考察了产物对吸收药热分解的催化作用.结果表明,在水溶液中得到的产物为15nm×40nm的棒状粒子,而在乙醇溶液中得到的是粒径约为50nm的球形粒子.产物对吸收药热分解有显著的催化效果,使吸收药的分解峰温降低5.6℃,分解热增加918J/g.     

The sensitive, anion-selective detection of arsenate with poly(allylamine hydrochloride) by single particle plasmon-based spectroscopy

The use of single gold nanoparticle plasmon-based spectroscopy for the sensitive, anion-selective detection of arsenate is described. The method is based on the selective formation of electrostatic complexes between arsenate and poly(allylamine hydrochloride) (PAH) and changes in the single particle plasmon in Rayleigh scattering profiles. PAH, when modified with gold nanoparticles, binds arsenate via its amine-functionalities. The scattering properties of the resulting selectively formed complexes are altered, leading to significant changes in the surface plasmon resonance wavelength. The limit of detection of the method was determined to be 10 nM, which is ca. 13 times more sensitive than U.S. EPA regulation levels. The response is essentially linear in the concentration range of 50-300 nM. The method also shows good selectivity for arsenate in the presence of other environmentally relevant anions, including H(2)PO(4)(-), SO(4)(2-), NO(3)(-), and Cl(-).     

Assessment of 4-(dimethylamino)pyridine as a capping agent for gold nanoparticles

Gold nanoparticles stabilized with 4-(dimethylamino)pyridine (DMAP) were prepared by ligand exchange and phase transfer (toluene/water) of functionalized gold nanoparticles. DMAP-protected gold nanoparticles are water-soluble, positively charged, and fairly monodisperse (6.2 +/- 0.9 nm). To understand the scope of this interesting system, the details of the binding of DMAP to gold nanoparticles were investigated. The adsorption of DMAP onto gold surfaces was studied by electrochemistry and surface plasmon resonance. It is concluded that of the three most likely binding modes, the one involving the pyridine nitrogen binding to the gold surface, as suggested previously (Gittins, D. I.; Caruso, F. Angew. Chem., Int. Ed. 2001, 40, 3001), is consistent with experimental data. Other 4-substituted pyridines were also assessed as capping agents. The solubility in toluene and basicity of the incoming ligand, as well as the ability to form charged nanoparticles, determine whether ligand exchange and subsequent phase transfer of the nanoparticles occur. The solubility and stability of the DMAP-protected gold nanoparticles were studied as a function of pH using UV-visible spectroscopy and transmission electron microscopy (TEM). These nanoparticles are soluble and stable over a wide pH range (5.0-12.8). It was found that excess DMAP is necessary for both the preparation and the stability of the DMAP-protected gold nanoparticles.     

Preparation of Luminescent Polyelectrolyte/Cu-Doped ZnSe Nanoparticle Multilayer Composite Films

ZnSe and Cu-doped ZnSe nanoparticle aqueous suspensions were prepared in the presence of mercaptopropionic acid (MPA). Cu-doped ZnSe nanoparticles exhibited a strong blue emission that was strongly dependent upon the Cu dopant level and the chemical surface passivation produced by zinc-mercaptopropionic acid complexes. These Cu-doped ZnSe nanoparticles were further assembled into ultrathin polymer-supported films using electrostatic interactions and the layer-by-layer assembly method. UV-visible spectroscopy and X-ray photoelectron spectroscopy (XPS) provided evidence for the presence and optical activity of Cu-doped ZnSe nanoparticles within the polymer ultrathin films. Moreover, XPS data supported the presence of zinc mercaptopropionic acid complexes on nanoparticle surfaces and the presence of Cu(+) ions with high luminescent activity in the doped nanoparticles. Copyright 2001 Academic Press.     

Nanocomposite membranes containing positively polarized gold nanoparticles for facilitated olefin transport

Positively polarized gold nanoparticles have been demonstrated for use as stable olefin carriers for facilitated olefin transport membranes. The formation and size of gold nanoparticles stabilized by 4-dimethylaminopyridine (DMAP) were monitored using X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–visible spectroscopy. Nanocomposite membranes that deliver high separation performance for olefin/paraffin mixtures were prepared by dispersing gold nanoparticles stabilized by DMAP in a polymer matrix, poly(vinyl pyrrolidone) (PVP). X-ray photoelectron spectroscopy (XPS) and zeta potential measurements revealed that gold nanoparticles stabilized by DMAP exhibited a high positive polarity, which is responsible for the reversible interaction between the gold nanoparticles and olefin molecules. Compared to neat PVP membranes, the composite membranes consisting of PVP and the polarized gold nanoparticles showed stable and enhanced separation of olefin/paraffin mixtures.     

Preparation and thermally promoted ripening of water-soluble gold nanoparticles stabilized by weakly physisorbed ligands

Here, we report on a facile method for the preparation of an aqueous dispersion of 3.6 nm gold nanoparticles electrostatically stabilized by a weakly physisorbed ligand, namely, 4-(dimethylamino)pyridine (DMAP). The nature and extent of the interaction of this ligand with the surface of a gold nanoparticle has been examined. We also report on the thermally promoted ripening of these nanoparticles under mild conditions to yield a dispersion of 11.3 nm gold nanoparticles. The role of the weakly physisorbed DMAP ligand in facilitating thermally promoted ripening under mild conditions has also been examined.     

Influence of Capping Ligands on the Self—organization of Gold Nanoparticles into Superlattices from CTAB Reverse Micelles

Gold nanoparticles with size 3-10nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent.The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM).Various capping ligands,such as alkylthiols with different chain length and shape,trioctylphosphine(TOP),and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures.It is shown that the ligands have a great influence on the selforganization of gold nanoparticles into superlattices,and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization.Self-organization of C12H25SH-capped gold nanoparticles into 1D,2D and 3D supperlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.     

Synthesis of a polymer-capped palladium nanoparticles and its application as a reusable catalyst in oxidative coupling reaction of α-hydroxyketones and 1,2-diamines for preparation of pyrazines and quinoxalines

A novel method for the synthesis of pyrazines and quinoxalines has been developed using α-hydroxyketones and 1,2-diamines in the presence of cross-linked poly(4-vinylpyridine)-stabilized Pd(0) nanoparticles, [P4-VP]-PdNPs. The catalyst was easily prepared and characterized using various techniques such as FT-IR and UV–Vis spectroscopy, AAS, TEM, FESEM, EDX analysis and XRD. The results confirm a good dispersion of palladium nanoparticles on the polymer support. The catalyst displayed good catalytic activity when applied to the synthesis of quinoxalines via condensation of α-hydroxyketones with 1,2-diamines. A few pyrazine derivatives and various quinoxalines are prepared via coupling reaction of α-hydroxyketones and 1,2-diamines in high–excellent yields (81–99%) with short reaction times. The quinoxalines products were characterized by FT-IR, ¹H and ¹³C NMR spectroscopy, and the physical properties were compared to the literature values of known compounds. The advantages of the present method over conventional classical methods are rapid and very simple work-up, and the catalyst is reusable many times without a significant loss in its activity.     

含p-ClC6H4-HIEAI配体的两个Pd(Ⅱ)配合物的合成、表征和PdCl(p-ClC6H4-IEAI)(p-ClC6H4NH2)的晶体结构

邻二肟配合物和邻肟-亚胺配合物已作为维生素B_(12)的模拟物加以研究。二齿异亚硝基-β-酮胺配体,由于其异亚硝基(肟基)配位功能而引起人们的兴趣。在已知的这类配体的金属配合物中,肟     

Synthesis of palladium nanoparticles by sonochemical reduction of palladium(II) nitrate in aqueous solution

The sonochemical synthesis of stable palladium nanoparticles has been achieved by ultrasonic irradiation of palladium(II) nitrate solution. The starting solutions were prepared by the addition of different concentrations of palladium(II) nitrate in ethylene glycol and poly(vinylpyrrolidone) (PVP). The resulting mixtures were irradiated with ultrasonic 50 kHz waves in a glass vessel for 180 min. The UV-visible absorption spectroscopy and pH measurements revealed that the reduction of Pd(II) to metallic Pd has been successfully achieved and that the obtained suspensions have a long shelf life. The protective effect of PVP was studied using Fourier transform infrared (FT-IR) spectroscopy. It has been found that, in the presence of ethylene glycol, the stabilization of the nanoparticles results from the adsorption of the PVP chain on the palladium particle surface via the coordination of the PVP carbonyl group to the palladium atoms. The effect of the initial Pd(II) concentration on the Pd nanoparticle morphology has been investigated by transmission electron microscopy. It has been shown that the increase of the Pd(II)/PVP molar ratio from 0.13 x 10(-3) to 0.53 x 10(-3) decreases the number of palladium nanoparticles with a slight increase in particle size. For the highest Pd(II)/PVP value, 0.53 x 10(-3), the reduction reaction leads to the unexpected smallest nanoparticles in the form of aggregates.     

Nitrile-functionalized pyridinium ionic liquids: synthesis, characterization, and their application in carbon-carbon coupling reactions

A series of relatively low-cost ionic liquids, based on the N-butyronitrile pyridinium cation [C(3)CNpy](+), designed to improve catalyst retention, have been prepared and evaluated in Suzuki and Stille coupling reactions. Depending on the nature of the anion, these salts react with palladium chloride to form [C(3)CNpy](2)[PdCl(4)] when the anion is Cl(-) and complexes of the formula [PdCl(2)(C(3)CNpy)(2)][anion](2) when the anion is PF(6)(-), BF(4)(-), or N(SO(2)CF(3))(2)(-). The solid-state structures of [C(3)CNpy]Cl and [C(3)CNpy](2)[PdCl(4)] have been established by single-crystal X-ray diffraction. The catalytic activity of these palladium complexes following immobilization in both N-butylpyridinium and nitrile-functionalized ionic liquids has been evaluated in Suzuki and Stille coupling reactions. All of the palladium complexes show good catalytic activity, but recycling and reuse is considerably superior in the nitrile-functionalized ionic liquid. Inductive coupled plasma spectroscopy reveals that the presence of the coordinating nitrile moiety in the ionic liquid leads to a significant decrease in palladium leaching relative to simple N-alkylpyridinium ionic liquids. Palladium nanoparticles have been identified as the active catalyst in the Stille reaction and were characterized using transmission electron microscopy.     

Preparation and electrochemical properties of MnO2 nanosheets attached to Au nanoparticles on carbon nanotubes

A wet chemical route for the preparation of MnO(2) nanosheet/Au nanoparticle/MWNT hybrid materials is developed. The Au nanoparticles are prepared by reducing AuCl(4)(-) with citrate and attached to thiol-modified MWNTs. Owing to the reducing property and the binding ability to Mn-containing species of capping agents surrounded the Au nanoparticles, the MnO(2) nanosheets are formed on the surface of Au nanoparticles. The ternary nanocomposites of MnO(2)/Au/MWNT have been characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and FT-IR spectroscopy. The affiliation of MnO(2) nanosheets into the hybrids remarkably enhances the electrocatalytic performance of Au nanoparticle/MWNT towards the oxygen reduction reaction. The specific capacitance of the ternary hybrids is also increased dramatically comparing with that of Au/MWNT.     

Binding of catechols to mononuclear titanium(IV) and to 1- and 5-nm TiO2 nanoparticles

The binding of catechol derivatives (LH 2 = catechol, 4-methyl catechol, 4-t-butyl catechol, and dopamine) to 1- and 4.7-nm TiO2 nanoparticles in aqueous, pH 3.5 suspensions has been characterized by UV-vis spectroscopy. The binding constants derived from Benesi-Hildebrand plots are (2-4) x 10(3) M(-1) for the 1-nm nanoparticles and (0.4-1) x 10(4)M(-1) for the 4.7-nm particles. Ti(IV)L3 complexes were prepared from the same catechols. The L = methyl catechol, and dopamine complexes are reported for the first time. The TiL3 reduction potentials are not very sensitive to the nature of the catechol nor evidently are the binding constants to TiO2 nanoparticles. The intense (epsilon > or = 10(3) M(-1)cm(-1)), about 400-nm, ligand-to-metal charge-transfer (LMCT) absorptions of the nanoparticle complexes are compared with those of the TiL 3 complexes (epsilon approximately 10(4)M(-1) cm(-1)) which lie in the same spectral region. The nanoparticle colors are attributed (as are the colors of the Ti(IV)L3 complexes) to the tails of the about 400-nm LMCT bands.     

In Situ Monitoring of Pt Nanoparticle Formation in Ethylene Glycol Solution by SAXS-Influence of the NaOH to Pt Ratio

The temporal evolution of Pt nanoparticle formation in ethylene glycol solution from H(2)PtCl(6)·6H(2)O at 90 °C for different molar ratios of NaOH to Pt (84, 6.5, and 2) in the presence or absence of poly(N-vinyl-2-pyrrolidone) (PVP) as protecting agent was followed in situ by small-angle X-ray scattering (SAXS). The SAXS profiles were analyzed regarding particle size and size distribution using the Guinier approximation and the indirect Fourier transform technique (IFT). The NaOH to Pt ratio has an influence on the integral nanoparticle formation rate as well as on the metal reduction rate and the ratio of nucleation to growth reactions. The fastest nanoparticle formation rate was observed for the NaOH/Pt ratio of 6.5. The obtained results indicate that the differences in the particle formation rate might be due to differences in the reduction rate of the formed Pt complexes. In alkaline reaction media (NaOH/Pt = 84 or 6.5), small nanoparticles with a relatively narrow size distribution were formed. Therefore, it is assumed that for these NaOH/Pt ratios the particle formation is dominated by nucleation reactions. Additionally, the in situ studies point out that nanoparticles prepared at the NaOH/Pt ratio of 84 do not grow further after attaining a certain particle size. For a NaOH to Pt ratio of 2, that means in acidic medium, particle formation should be dominated by growing processes and, therefore, larger particles are formed accompanied by a broader particle size distribution. The influence of PVP on the nanoparticle formation rate is relatively low. However, in acidic medium, the presence of PVP is necessary in order to protect the formed nanoparticles from irreversible aggregation reactions.     

由铜-胺氧化还原引发反应一步法简便制备TiO_2表面接枝聚甲基丙烯酸甲酯纳米杂化粒子

提出并验证了一种通过普通自由基聚合在纳米TiO2表面接枝聚甲基丙烯酸甲酯的简单方法.通过在纳米TiO2粒子表面引入伯胺分子层(纳米TiO2-NH2粒子),利用Cu2+-胺氧化还原体系实现了CuSO4催化纳米TiO2-NH2粒子表面引发甲基丙烯酸甲酯(MMA)的自由基接枝聚合,从而一步得到表面固定有聚甲基丙烯酸甲酯链的纳米TiO2杂化粒子(纳米TiO2-PMMA杂化粒子).红外光谱、热失重分析与电镜的结果都表明PMMA已经被接枝到纳米TiO2粒子表面,且接枝率随着聚合时间的延长而逐渐增大,PMMA链的引入有助于降低纳米TiO2粒子微球的团聚程度、增强与有机溶剂分子的范德华力,从而提高分散稳定性.反应溶液中没有游离均聚物形成.     

2-(N-Alkylcarboxamide)-6-iminopyridyl palladium and nickel complexes: coordination chemistry and catalysis

The 2-(N-alkylcarboxamide)-6-iminopyridine ligands (L1-L7) can bind as either mono-anionic tridentate N^N^N ligands on reaction with PdCl(2)(CH(3)CN)(2), to form complexes LPdCl (C1-C7), or as neutral tridentate N^N^O ligands with NiCl(2)·6H(2)O, to produce complexes LNiCl(2) (C8-C14). All metal complexes were characterized by IR spectroscopy and elemental analysis, and in the case of the palladium complexes, by (1)H and (13)C NMR spectroscopy. The crystal structures of C3, C4, C6, C10, and C12 were determined by X-ray crystallography, and revealed a distorted square geometry around the palladium centre, whereas for nickel, a distorted square-pyramidal geometry was adopted. The representative palladium complex (C3) was further reacted with AgBF(4) in acetonitrile affording the salt [L3Pd(CH(3)CN)][BF(4)] (C15) and the structure of this was confirmed by single-crystal X-ray diffraction. By contrast, carrying out the reaction in dichloromethane rather than acetonitrile, in the presence of malononitrile (CNCH(2)CN), resulted in the formation of the bimetallic palladium complex [L3Pd(CNCH(2)CN)PdL3]·2[BF(4)] (C16). Upon activation with diethylaluminium chloride, all the nickel complexes showed high activity for ethylene dimerization. Furthermore, the palladium complexes exhibited good activities in the vinyl-polymerization of norbornene upon activation with MAO.     

Palladium-Carbon Composite Nanoparticle Films with Enhanced Electrocatalytic Activity for Hydrogen Peroxide Sensors

A nanocomposite electrocatalyst was prepared with the method of cluster beam deposition of palladium nanoparticle thin lms on carbon nanoparticle supporting layers and used as sensitive nonenzyme hydrogen peroxide sensors. An enhancement on the electrocatalytic activity of the palladium nanoparticles toward H₂O₂ reduction was observed, which was related to the coverage of the carbon nanoparticles. With one monolayer of carbon nanoparticles, the H₂O₂ detection sensitivity reached the maximum, which was more than twice of that of the pure Pd nanoparticles.