Thermodynamic and structural aspects of the interaction of l-histidine with urea and dimethylformamide in water

The solubility of l-histidine in water and aqueous solutions of dimethylformamide (DMF) at 25°C was determined. The thermal effects of solution of l-histidine in aqueous solutions of urea and DMF were measured. The standard enthalpies, free energies, and entropies of solution and transfer of the amino acid from water to aqueous solutions of amides were calculated. It was shown that the interaction of l-histidine with urea is attractive, and that with DMF, repulsive, with the change in the free energy determined by the enthalpy term in both cases. The enthalpy-entropy compensation taking place to a certain extent in the interaction of l-histidine and l-phenylalanine with amide was revealed. This effect is the most pronounced in the interaction of predominantly hydrophobic DMF and l-phenylalanine.     

Comparison of ordered mesoporous materials sorption properties towards amino acids

The adsorption of amino acids such as l-phenylalanine and l-histidine was carried out on a series of mesoporous carbons obtained with the use ordered silicas KIT-6, SBA-16, SBA-15 as templates and furfuryl alcohol as carbon precursor. Small angle XRD analysis confirmed the ordered mesoporous structures of all materials obtained. They were also characterised by well-developed surface areas and high pore volumes. Adsorption behaviour of amino acids on ordered mesoporous carbons was investigated in potassium phosphate buffer solutions with adjustable l-phenylalanine and l-histidine concentration, ion strength, and pH. The highest sorption capacity towards the amino acids were observed at pH close to the isoelectric point of l-phenylalanine (pI = 5.48) and l-histidine (pI = 7.59). Electrostatic, hydrophobic and steric interactions had very strong effect on the adsorption of amino acids on mesoporous carbons. The amount of l-phenylalanine and l-histidine adsorbed decreased in the following sequence: C_KIT-6 > C_SBA-16 > C_SBA-15 that was strongly related to their structure, surface areas and average pore diameters.     

Study of the interaction between ethanol and natural amino acids containing ionic side groups in water at T = 298.15 K

The enthalpies of solution of l-α-aspartic acid, l-α-glutamic acid, l-α-arginine, l-α-lysine, and l-α-histidine have been measured in aqueous ethanol solutions at 298.15 K. From the obtained experimental results, the standard enthalpies of solution of amino acids in water–ethanol solutions have been determined. These data were used to calculate the heterogeneous enthalpic pair interaction coefficients based on McMillan–Mayer’s formalism. These values were interpreted in the terms of the ionic or no polar effect of the side chains of l-α-amino acids on their interactions with a molecule of ethanol in water.     

Application of Hydrazino Dinitrophenyl-Amino Acids as Chiral Derivatizing Reagents for Liquid Chromatographic Enantioresolution of Carbonyl Compounds

A new series of chiral derivatizing reagents (CDRs) consisting of five hydrazino dinitrophenyl (HDNP)-amino acids (CDR 1?C5) was prepared by a two-step synthesis procedure starting from 1,5-difluoro-2,4-dinitrobenzene (DFDNB). In the first step, five fluoro-dinitrophenyl (FDNP)-reagents, namely FDNP-l-Leu, FDNP-l-Val, FDNP-l-Phe, FDNP-l-Ala and FDNP-d-Phg were synthesized by substituting one of the fluorine atoms in DFDNB moiety with amino acids l-Leu, l-Val, l-Phe, l-Ala and d-Phg, respectively. In the following step, the remaining fluorine atom of the FDNP reagents was substituted with hydrazine hydrate to obtain five HDNP reagents (i.e. CDR 1?C5; HDNP-l-Leu, HDNP-l-Val, HDNP-l-Phe, HDNP-l-Ala and HDNP-d-Phg). These five CDRs were used for synthesis of diastereomers of six racemic carbonyl compounds which were resolved by high-performance liquid chromatography using C18 column and gradient eluting mixture of acetonitrile or methanol with triethylammonium phosphate buffer with UV detection at 348 nm. Microwave irradiation was used for synthesis of both the CDRs and the diastereomers. The newly synthesized CDRs were observed to be superior in comparison to their counterparts having amino acid amides as chiral auxiliaries in terms of cost effectiveness and providing better resolution of diastereomers. The method was validated for limit of detection, linearity, accuracy and precision.     

Determination of Tryptophan in Lysozyme and Lysozyme Hydrolysate by Chiral LC Using d-Tryptophan as Internal Standard

In the present study, a new LC method is described for the quantitation of tryptophan (Trp) in lysozyme and enzymatic lysozyme hydrolysate. To compensate for partial breakdown of Trp during hydrolysis with 4 M methanesulfonic acid, an enantiomer dilution method was developed. The method makes use of free d-Trp or a d-Trp-containing dipeptide as internal standard for the quantitation of l-tryptophan in these matrices. After acid hydrolysis in 4 M methanesulfonic acid, LC analysis is performed on a Crownpak CR chiral column in combination with fluorescence detection. Optimum time and temperature for the acid hydrolysis were investigated in order to obtain complete hydrolysis of the source materials. A comparison of the l-Trp recoveries was made for d-Trp and Gly-d-Trp as internal standards. By choosing a hydrolysis time of 150 min at 150 °C, 93% recovery of l-Trp from lysozyme was achieved. Under these conditions, no racemization occurred. When choosing d-Trp as internal standard, a direct LC method for l-Trp in lysozyme and enzymatic lysozyme hydrolysate was established without the need for pre-column derivatization and without the need to use Trp protecting agents during acid hydrolysis.     

Exploiting thermodynamic data to optimize the enantioseparation of underivatized amino acids in ligand exchange capillary electrophoresis

Stereoselective amino acid analysis has increasingly moved into the scope of interest of the scientific community. In this work, we report a study on the chiral separation of underivatized d,l-His by ligand exchange capillary electrophoresis (LECE), utilizing accurate ex ante calculations. This has been obtained by the addition to the background electrolytes (BGE) of NaClO₄ which renders the separations “all in solution processes”, allowing to accurately calculate in advance the concentrations of the species present in solution and to optimize the system performances. To this aim, the formation of ternary complexes of Cu²⁺ ion and l-lysine (l-Lys) or l-ornithine (l-Orn) with l- and d-histidine (His), and histamine (Hm) have been studied by potentiometry and calorimetry at 25 °C and with 0.1 mol dm^?3 (KNO₃) in aqueous solution. The ternary species [Cu(L)(l-His)H]⁺ and [Cu(L)(d-His)H]⁺ (where L?=?l-Lys or l-Orn) show a slight but still detectable stereoselectivity, and the determination of ΔH° and ΔS° values allowed the understanding of the factors which determine this phenomenon. The stereoselectivity showed by the protonated ternary species has been exploited to chirally separate d,l-His in LECE, by using the binary complexes of copper(II) with l-Lys or l-Orn as background electrolytes added with the appropriate amounts of NaClO₄.

A new chiral electrochemical sensor for the enantioselective recognition of penicillamine enantiomers

A new chiral electrochemical sensor has been successfully prepared through chemical linking l-methotrexate (l-Mtx) onto the gold electrode surface. Cyclic voltammetry and electrochemical impedance spectroscopy were used to investigate the enantioselective interaction between l-Mtx and Pen enantiomers. The results showed that the l-Mtx-modified gold electrode can selectively recognize penicillamine (Pen) enantiomers using Zn(II) as central ion, and larger response signal was observed from d-Pen owing to the selective formation of Zn complexes. The interaction time between the modified electrode and Pen enantiomers containing Zn(II) was considered. And the electrochemical response of the modified electrode to a series of different concentration of Pen in the presence of Zn(II) was also monitored. In addition, the enantiomeric composition of d- and l-Pen enantiomer mixtures was monitored by measuring the current responses of the sample.     

The yjjN of E. coli codes for an l-galactonate dehydrogenase and can be used for quantification of l-galactonate and l-gulonate

Escherichia coli is able to utilize l-galactonate as a sole carbon source. A metabolic pathway for l-galactonate catabolism is described in E. coli, and it is known to be interconnected with d-galacturonate metabolism. The corresponding gene encoding the first enzyme in the l-galactonate pathway, l-galactonate-5-dehydrogenase, was suggested to be yjjN. However, l-galactonate dehydrogenase activity was never demonstrated with the yjjN gene product. Here, we show that YjjN is indeed an l-galactonate dehydrogenase having activity also for l-gulonate. The K _m and k _cat for l-galactonate were 19.5?±?0.6 mM and 0.51?±?0.03 s^?1, respectively. In addition, YjjN was applied for a quantitative detection of the both of these substances in a coupled assay. The detection limits for l-galactonate and l-gulonate were 1.65 and 10 μM, respectively.     

The pivotal role of copper(II) in the enantiorecognition of tryptophan and histidine by gold nanoparticles

Stereoselective amino acid analysis has increasingly moved into the scope of interest of the scientific community. In this work, we report a study on the chiral recognition of d,l-Trp and d,l-His using l-Cys-capped gold nanoparticles (AuNPs) and copper(II) ion. In the l-Cys-capped AuNPs, the thiol group of the amino acid interacts with AuNPs through the formation of Au–S bond, whereas the α-amino and α-carboxyl groups of the surface-confined cysteine can coordinate the copper(II) ion, which in turn, binds the l- or d-amino acid present in solution forming diastereoisomeric complexes. The resulting systems have been characterized by UV–Vis spectra and dynamic light scattering measurements, obtaining different results for l- and d-Trp, as well as for l- and d-His. The knowledge of the solution equilibria of the investigated systems allowed us to accurately calculate in advance the concentrations of the species present in solution and to optimize the system performances, highlighting the pivotal role of copper(II) ion in the enantiodiscrimination processes.     

β-Cyclodextrin functionalized gold nanoparticles: characterization and its analytical application for l-tyrosine

β-Cyclodextrin functionalized gold nanoparticles (β-CD-Au NPs) were synthesized and characterized. The interaction of β-CD-Au NPs with l-tyrosine (l-Tyr) is studied by fluorescence and absorption spectroscopy. β-CD-Au NPs was found to remarkably quench fluorescence of l-Tyr at 305 nm. Experimental conditions including media acidity, temperature and concentration of buffer were examined for the inclusion formation. Furthermore, fluorescence resonance energy transfer occurred with Föster radius 2.39 nm. Apparent binding constants and corresponding thermodynamic parameters at different temperatures were calculated by Stern–Volmer equation and thermodynamic formula, respectively. The binding constant declines with the increasing temperature illustrating static quenching exists and the binding l-Tyr on β-CD-Au NPs is a spontaneous molecular interaction process in which entropy and Gibbs free energy decreases. Hydrophobic interaction and van der Waals forces could be in dominant action in the formation of the complex. The concentration of l-Tyr is proportional to decrease of the fluorescence intensity in the range of 0.02–1.5 μM with the detection limit (S/N = 3) of 1.6 nM. There is little interference from the coexisting substances normally used as the pharmaceutical main compositions. The proposed method combined the unique physical and chemical properties of the gold core with the molecular recognition ability of β-CD and possessed high sensitivity and good selectivety. It has been successfully applied to determination of l-Tyr in compound amino acid injection.     

Direct TLC Resolution of the Enantiomers of Three β-Blockers by Ligand Exchange with Cu(II)–l-Amino Acid Complex, Using Four Different Approaches

TLC experiments have been performed to resolve the enantiomers of three β-blockers by complexation chiral TLC with Cu(II) cation and five l amino acids. Loading was carried out by using the Cu(II)–l amino acid complex as chiral mobile phase additive with untreated silica gel plates; by mixing the Cu complex with silica gel before preparing the TLC plates; by ascending development of untreated plates with solutions of the Cu complex; and by using a solution of Cu(II) acetate as mobile phase additive for plates prepared by mixing the l amino acid with silica gel. Spots were located by use of iodine vapour.     

Study on the intermolecular complexation behavior between p-sulfonatocalix[4]arene with l-tyrosine

The formation of the complexation behavior of host molecules water-soluble p-sulfonatocalix[4]arene (p-SCX4) with l-tyrosine (l-Tyr) guest molecule has been studied by spectrophotometric including fluorescence and nuclear magnetic resonance (NMR) spectroscopy. Experimental conditions including concentration of p-SCX4 and medium acidity were investigated in detail. The results showed that p-SCX4 forms 1:1 complexes with l-Tyr in water. Their stability constant determined by spectrofluorometric titration is 15761 L mol. Moreover, to obtain information about the binding mechanism of the interaction, ¹H NMR studies were carried out showing that the water-soluble p-SCX4 was found to be able to complex the aromatic l-Tyr, and the part of benzene ring of amino acid penetrated into the hydrophobic cavity of calix[4]arene and charged aliphatic chain of l-Tyr stick out of the cavity. In addition, the thermodynamic parameters for the complexation of p-SCX4 with l-Tyr were determined through Van’t Hoff analysis. The obtained data further confirmed the binding mode of p-SCX4 with l-Tyr. The related mechanism is proposed to explain the complexation processes.     

Enantioselective extraction of fenvaleric acid enantiomers by two-phase (W/O) recognition chiral extraction

To establish an extraction method for fenvaleric acid (FA) enantiomers using l-iso-butyl-l-tartaric esters and hydroxypropyl-β-cyclodextrin (HP-β-CD) as chiral selector, the distribution of FA enantiomers was examined in methanol aqueous solution containing HP-β-CD and 1,2-dichloroethane organic solution containing l-iso-butyl-l-tartaric esters. The influences of the concentration of l-iso-butyl-l-tartaric esters and HP-β-CD, organic diluent, pH, extraction temperature and the concentration of methanol aqueous solution on the partition coefficient (k) and separation factor (α) of FA were investigated. The experiment results showed that the complex formed by l-iso-butyl-l-tartaric esters with S-enantiomer is stabler than that with R-enantiomer. With the increase of the concentration of l-iso-butyl-l-tartaric ester, k and α increased; With the increase of the concentration of HP-β-CD, k increased firstly, and then decreased, but α increased all the while, k was the highest when the concentration of HP-β-CD was 4 mmol L^?1. 1,2-dichloroethane organic diluent was better than the others. With the increase of pH, k and α decreased; with further increasing concentration of methanol aqueous solution, k and α decreased, k and α were the highest when the concentration of methanol aqueous solution was 10%. The extraction temperature had a great influence on k and α, too.     

Activity and Synergistic Antimicrobial Activity Between Diketopiperazines Against Bacteria In Vitro

The aim of the present study was to determine the synergistic effects of diketopiperazines [cyclo-(l-Pro-l-Leu) (1), cyclo-(d-Pro-l-Leu) (2), and cyclo-(d-Pro-l-Tyr) (3)] purified from a Bacillus sp. N strain associated with entomopathogenic nematode Rhabditis (Oscheius) sp. on the growth of bacteria. The minimum inhibitory concentration and minimum bactericidal concentration of the diketopiperazines was compared with that of the standard antibiotics. The synergistic antibacterial activities of the combination of diketopiperazines against pathogenic bacteria were assessed using the checkerboard assay and time?Ckill methods. The results of the present study showed that the combination effects of diketopiperazines were predominately synergistic (FIC index <0.5). Furthermore, time?Ckill study showed that the growth of the tested bacteria was completely attenuated with 4?C12?h of treatment with 50:50 ratios of diketopiperazines. These results suggest that the combination of diketopiperazines may be microbiologically beneficial. The three diketopiperazines are nontoxic to normal human cell line (L231 lung epithelial) up to 200?m???g/ml. The in vitro synergistic activity of cyclo-(l-Pro-l-Leu), cyclo-(d-Pro-l-Leu), and cyclo-(d-Pro-l-Tyr) against bacteria is reported here for the first time. These findings have potential implications in delaying the development of resistance as the antibacterial effect is achieved with lower concentrations of both drugs (diketopiperazines).     

The crystal structures of chiral (R/S) (C8H11N)2·Cu(OAc)2

The two title chiral complexes (R/S) (C₈H₁₁N)₂·Cu(OAc)₂ were synthesized by the reaction of chiral d(+)/l(?)-??-ethylphenyl amine with copper(II) acetate monohydrate in dry ethanol. The crystal structures of 1a and 1b were obtained and determined by X-ray crystallography.     

Syntheses of organocatalysts with one-handed helix and their application to the kinetic resolution of second alcohol

Peptide-based organocatalysts with a helical structure induced by a terminal l-histidine derivative were synthesized. These organocatalysts were applied to the kinetic resolution of secondary alcohol.     

Cis-Cycloprolylprolin-Anion-ein konfigurationsstabiles Carbanion

The racemisation ofcyclo-(l-Pro?l-Pro) (2) with metal amides in liq. ammonia was examined. The K-kation causes more extensive racemisation than Na-kation, which in turn is more effective than Li⁺. This, the racemisation of2 int-butyl alcohol with K⁺C₆H₅O^? and the data gained from corresponding deuterated medium show that the racemisation of2 proceeds in two steps: in the first, the less stabletrans-cyclo-(l-Pro?d-Pro) (3) is formed, followed by the rapid conversion of3 to a mixture ofcyclo-(l-Pro?l-Pro) andcyclo-(d-Pro?d-Pro) in the second step.     

Neue enzymatische Analysenmethoden zur Bestimmung von Maltose,Stärke und Lactat in der Lebensmittelchemie

1. Determination of Maltose. Maltose is hydrolyzed by the enzyme α-glucosidase into glucose, which is determined by the enzymes hexokinase and glucose-6-phosphate-dehydrogenase. α-Glucosidase is specific for oligosaccharides with α-1,4 and α-1,2 bonds.
2. Determination of Starch and Glycogen. Starch and glycogen are splitted to glucose by the enzyme amylo-glucosidase. Starch has to be dissolved before enzymatic cleavage. A comparison of different methods for preparing starch solutions is given.
3. Determination of d- and l-Lactate. It is possible to determine d-lactate and l-lactate with the specific enzymes d-lactate-dehydrogenase and l-lactate-dehydrogenase. By different samples it is shown that no equal quantities of d- and l-lactate were found in the analyzed foods.

     

A Validated Chiral LC Method for the Enantiomeric Separation of Nateglinide and the Quantitative Determination of Its l-Enantiomer

A simple and accurate chiral liquid chromatographic method was developed for the enantiomeric purity determination of d-nateglinide and quantitative determination of l-nateglinide in bulk drug samples. Good resolution (R _s  > 6.0) between d-enantiomer and l-enantiomer of nateglinide were achieved with Chiralpak AD-H (250 × 4.6 mm, 5 μm particle size) column using hexane and ethanol (90:10 v/v) as mobile phase at 25 °C temperature. Flow rate was kept as 1.0 mL min^?1 and elution was monitored at 210 nm. The effects of the mobile phase composition, the flow rate and the temperature on the chromatographic separation were investigated. Developed method is capable to detect (LOD) and quantitate (LOQ) l-nateglinide to the levels of 0.3 and 1.0 μg mL^?1 respectively, for 10 μL injection volume. The percentage RSD of the peak area of six replicate injections of l-nateglinide at LOQ concentration was 5.2. The percentage recoveries of l-nateglinide from d-nateglinide ranged from 97.9 to 99.7. The test solution and mobile phase was found to be stable up to 24 h after preparation. The developed method was validated with respect to LOD, LOQ, precision, linearity, accuracy, robustness and ruggedness.