Imaging of Noncovalent Complexes by MALDI-MS

Noncovalent interactions govern how molecules communicate. Mass spectrometry is an important and versatile tool for the analysis of noncovalent complexes (NCX). Electrospray mass spectrometry (ESI-MS) is the most widely used MS technique for the study of NCXs because of its softer ionization and easy compatibility with the solution phase of NCX mixtures. Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has also been used to study NCXs. However, successful analysis depends upon several experimental factors, such as matrix selection, solution pH, and instrumental parameters. In this study, we employ MALDI imaging mass spectrometry to investigate the location and formation of NCXs, involving both peptides and proteins, in a MALDI sample spot.

MALDI-MS imaging of lipids in ex vivo human skin

Lipidomics is a rapidly expanding area of scientific research and there are a number of analytical techniques that are employed to facilitate investigations. One such technique is matrix-assisted laser desorption ionisation (MALDI) mass spectrometry (MS). Previous MALDI-MS studies involving lipidomic investigation have included the analysis of a number of different ex vivo tissues, most of which were obtained from animal models, with only a few being of human origin. In this study, we describe the use of MALDI-MS, MS/MS and MS imaging methods for analysing lipids within cross-sections of ex vivo human skin. It has been possible to tentatively identify lipid species via accurate mass measurement MALDI-MS and also to confirm the identity of a number of these species via MALDI-MS/MS, in experiments carried out directly on tissue. The main lipid species detected include glycerophospholipids and sphingolipids. MALDI images have been generated at a spatial resolution of 150 and 30 μm, using a MALDI quadrupole time-of-flight Q-Star Pulsar-i ^TM (Applied Biosystems/MDS Sciex, Concord, ON, Canada) and a MALDI high-definition MS (HDMS) SYNAPT G2-HDMS^TM system (Waters, Manchester, UK), respectively. These images show the normal distribution of lipids within human skin, which will provide the basis for assessing alterations in lipid profiles linked to specific skin conditions e.g. sensitisation, in future investigations.     

Paramagnetic behaviour of silver nanoparticles generated by decomposition of silver oxalate

Silver oxalate Ag₂C₂O₄, was already proposed for soldering applications, due to the formation when it is decomposed by a heat treatment, of highly sinterable silver nanoparticles. When slowly decomposed at low temperature (125 °C), the oxalate leads however to silver nanoparticles isolated from each other. As soon as these nanoparticles are formed, the magnetic susceptibility at room temperature increases from −3.14 10⁻⁷ emu.Oe⁻¹.g⁻¹ (silver oxalate) up to −1.92 10⁻⁷ emu.Oe⁻¹.g⁻¹ (metallic silver). At the end of the oxalate decomposition, the conventional diamagnetic behaviour of bulk silver, is observed from room temperature to 80 K. A diamagnetic-paramagnetic transition is however revealed below 80 K leading at 2 K, to silver nanoparticles with a positive magnetic susceptibility. This original behaviour, compared to the one of bulk silver, can be ascribed to the nanometric size of the metallic particles.     

Chemiluminescence of luminol catalyzed by silver nanoparticles

Silver nanoparticles (AgNPs) are synthesized by chemical reduction method and characterized by UV-vis spectra, transmission electron microscopy, and high performance particle sizer. We have found that AgNPs could enhance the chemiluminescence (CL) intensity of luminol-H(2)O(2) system. In this reaction, luminol intermediate is generated under alkaline condition on the surface of AgNPs in luminol-H(2)O(2) system and enhances CL intensity. To validate the reaction mechanism, AgNPs are bound with thioglycolic acid (Ag-HSCH(2)COOH) and then joined to BSA protein (Ag-BSA). We investigate the CL intensity in the presence of Ag-HSCH(2)COOH or Ag-BSA comparing with that in the presence of AgNPs and conclude the catalytic reaction take place on the surface of AgNPs.     

Cellulose fibers modified with silver nanoparticles

Cellulose fibers modified with silver nanoparticles were prepared using N-methylmorpholine-N-oxide as a direct solvent and analyzed in this study. Silver nanoparticles were generated as a product of AgNO₃ reduction by means of three methods under varying light conditions (daylight and darkroom). Influence of generating conditions on the size, the type and the number weighting of created nanoparticles was examined. Dynamic Light Scattering technique (DLS) was used for determination of those parameters. DLS analysis showed that the best method, i.e. the one that allowed the generation of the greatest number of silver nanoparticles with the smallest diameter and the smallest agglomerates, was incubation of cellulose pulp with AgNO₃ in a darkroom for 24 h. Mechanical and hydrophilic properties of all obtained fibers were also determined. Results showed that the method of silver nanoparticles generation did not influence significantly mechanical and hydrophilic properties of the modified fibers, because in all cases only small decreases of the studied parameters were observed.     

Preparation of silver nanoparticles in solution from a silver salt by laser irradiation

A new method is proposed for the fabrication of a well-defined size and shape distribution of silver nanoparticles in solution; the method employs direct laser irradiation of an aqueous solution containing a silver salt and a surfactant in the absence of reducing agents.     

The bifunctional role of Ag nanoparticles on bacteria--a MALDI-MS perspective

MALDI-MS is now replacing the conventional cumbersome bacterial identification techniques with its high efficiency, reliability and rapidity. One of the methodologies facilitating increased detection sensitivity of bacterial cells by MALDI-MS is through the use of nanoparticle (NP) based affinity probes. The present paper brings out the bifunctional property of Ag NPs in acting as affinity probes at ideal concentrations and bactericidal at higher concentrations. These interactions have been explained on the basis of the studies conducted with two model bacterial systems, Escherichia coli and Serratia marcescens. This work highlights the importance of NP concentration when used for affinity capture of bacteria. The results of the paper indicate a critical concentration specific to every bacteria and hence the need to identify the critical concentration of affinity probes (CCAP) for a specific NP with respect to individual bacterial species before considering its use as affinity probe for bacterial studies. The CCAP for Ag NPs was identified in the present study to be 1 mL L(-1) in the case of E. coli and was 0.5 mL L(-1) for S. marcescens. So far, MALDI-MS results were categorized as qualitative only; in this paper we have used a methodology for converting the mass data to yield quantitative results. The MYSTAT software based Tukey-Kramer multiple comparison tests proved that these threshold values (CCAP) were statistically significant. Above these concentrations Ag NPs were found to show pronounced bactericidal activity rather than affinity probe properties. The following study also demonstrates a modified protocol in that the NPs were incubated with the bacterial cultures at low concentrations, instead of the usual method of adding NPs at high concentrations to well grown bacterial cultures. A possible mechanism for the mode of action of NPs in enhancing bacterial detection sensitivity in the MALDI-MS is also proposed in this paper.     

Synthesis of silver nanoparticles with polystyrylcarboxylate ligands

Silver nanoparticles stabilized by polystyrylmonocaboxylate ligands with varied chain lengths are synthesized via the low-temperature reduction of silver polystyrylmonocaboxylate with triethylamine. Silver nanoparticles have small dimensions, narrow size distributions, high stability, and ability to redisperse in nonpolar solvents. The kinetic features of the reaction are studied via high-performance liquid chromatography; UV, visible and IR spectroscopy; and transmission electron microscopy. It is shown that the reduction of silver occurs in the cores of reverse micelle species organized by diphilic macromolecules of silver polystyrylmonocarboxylates.     

Synthesis of silver nanoparticles with different shapes

Today the synthesis of silver nanoparticles is very common due to their numerous applications in various fields. Silver nanoparticles have unique properties such as: optical and catalytic properties, which, depend on the size and shape of the produced nanoparticles. So, today the production of silver nanoparticles with different shapes which have various uses in different fields such as medicine, are noted by many researchers. This article, is an attempt to present an overview of the shape-controlled synthesis of silver nanoparticles using various methods.     

Complementary analysis of lipids in whole bacteria cells by thermally assisted hydrolysis and methylation-GC and MALDI-MS combined with on-probe sample pretreatment

The molecular structure of lipids in whole bacteria cells was characterized in detail by using two different and complementarily direct analyses; thermally assisted hydrolysis and methylation-gas chromatography (THM-GC) and matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) combined with on-probe sample pretreatment. First, THM-GC in the presence of tetramethylammonium hydroxide (TMAH) was applied to compositional analysis of the fatty acid components of lipids in whole bacterial cells. On the resulting chromatograms, a series of fatty acid components in bacterial lipids were clearly observed as resolved peaks of their methyl esters. The fatty acid compositions determined on the basis of the peak intensities were in good agreement with those obtained by the conventional technique involving solvent extraction of the lipids in the samples. Furthermore, MALDI-MS combined with the on-probe sample treatment, using 2,5-dihydroxybenzoic acid (DHB) and sodium iodide (NaI) as matrix and cationization reagents, respectively, was used to detect intact phospholipids directly from whole bacterial cells. The MALDI spectra thus obtained showed an array of ions generated from bacterial phospholipids, such as phosphatidylethanolamines (PEs) and phosphatidylglycerols (PGs). Finally, the bacterial lipids were comprehensively characterized in terms of the acyl groups and the molecular structures by taking both of the results obtained by THM-GC and MALDI-MS into consideration.     

Sonochemical coating of paper by microbiocidal silver nanoparticles

Colloidal silver has gained wide acceptance as an antimicrobial agent, and various substrates coated with nanosilver such as fabrics, plastics, and metal have been shown to develop antimicrobial properties. Here, a simple method to develop coating of colloidal silver on paper using ultrasonic radiation is presented, and the coatings are characterized using X-ray diffraction (XRD), high resolution scanning electron microscope (HRSEM), and thermogravimetry (TGA) measurements. Depending on the variables such as precursor concentrations and ultrasonication time, uniform coatings ranging from 90 to 150 nm in thickness have been achieved. Focused ion beam (FIB) cross section imaging measurements revealed that silver nanoparticles penetrated the paper surface to a depth of more than 1 μm, resulting in highly stable coatings. The coated paper demonstrated antibacterial activity against E. coli and S. aureus, suggesting its potential application as a food packing material for longer shelf life.     

Microwave-Assisted Coating of PMMA beads by silver nanoparticles

Microwave (MW) irradiation was found to be a new technique for coating silver nanoparticles with an average size of approximately 31 nm onto the surface of poly(methyl methacrylate) PMMA beads (3 mm diameter). The microwave polyol reduction was carried out under an argon atmosphere. Silver nanoparticles were obtained by the MW irradiation of a solution mixture containing silver nitrate (or silver acetate), poly(ethylene glycol), ethanol, water, and 24 wt % aqueous ammonia for 5 min in the presence of PMMA beads, yielding a PMMA-nanosilver composite. By controlling the atmosphere and reaction conditions, we could achieve the deposition of silver nanoparticles onto the surface of poly(methyl methacrylate) and vary the amount of the silver anchored to the surface. The resulting silver-deposited PMMA samples were characterized using X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray analysis, high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy, and volumetric titration with potassium thiocyanate (KSCN) according to the Folgard method.     

Interaction of silver nanoparticles with ozone in aqueous solution

The interaction between ozone and silver nanoparticles stabilized with sodium polyphosphate is studied in aqueous solutions. The process of ozone decomposition is established to have a chain character. The oxidation of one silver atom initiates the decomposition of about three ozone molecules. The stability of colloidal silver decreases upon the oxidation, which leads to its partial aggregation.     

Structural transformations in silver nanoparticles

A molecular dynamics simulation was performed for silver clusters of 147, 309, and 561 atoms with the initial cuboctahedral habit in the temperature range 0–1000 K with an embedded atom potential for silver. Structural transitions of the silver clusters to complex twins (icosahedral habit) with coherent (111)/(111) boundaries over all edges of icosahedra were found, which started at temperatures of 50 K, 350 K, and 700 K, respectively. To analyze the structural transformations in nanoparticles, an algorithm is proposed based on a simplicial Delaunay decomposition (Delaunay triangulation). It was found that after the transition of silver nanoparticles to complex twins, the atomic motion becomes vibrational; the atoms vibrate around the sites that correspond to the vertices of the regular polyhedra. In the case of the 147-atom silver nanoparticle, the polyhedra are arranged in the following sequence, starting from the center of mass: icosahedron (12 atoms), icosododecahedron (30 atoms), icosahedron (12 atoms), dodecahedron (20 atoms), truncated icosahedron (60 atoms, isostructural with fullerene C₆₀), icosahedron (12 atoms), and one atom at the center of mass.     

Polyaniline-coated cellulose fibers decorated with silver nanoparticles

Cellulose fibers of 20 μm in diameter and aspect ratio of 2 or 10 were coated with protonated polyaniline (PANI) during the oxidation of aniline hydrochloride with ammonium peroxydisulfate in an aqueous medium. The presence of PANI has been proved by FTIR spectroscopy. The conductivity increased from 4.0 × 10⁻¹⁴ S cm⁻¹ to 0.41 S cm⁻¹ after coating the fibers with PANI. The percolation threshold in the mixture of original uncoated and PANI-coated fibers was reduced from 10 mass % PANI to 6 mass % PANI, as the aspect ratio changed from 2 to 10. The subsequent reaction with silver nitrate results in the decoration of PANI-coated cellulose fibers with silver nanoparticles of about 50 nm average size. The content of silver of up to 10.6 mass % was determined as a residue in thermogravimetric analysis. FTIR spectra suggest that the protonated emeraldine coating changed to the pernigraniline form during the latter process and, consequently, the conductivity of the composite was reduced to 4.1 × 10⁻⁴ S cm⁻¹, despite the presence of silver.     

Preparation of conducting silver paste with Ag nanoparticles prepared by e-beam irradiation

Conducting silver paste was prepared by using Ag nanoparticles which were synthesized by e-beam irradiation method (from KAERI); its conductivity was comparatively determined with Ag nanoparticles which were prepared by thermolysis method (commercial). The silver nanoparticles with the diameter of approximately 150 nm size prepared by e-beam irradiation were mixed with glass frit and sintered for 1 h at 500 °C. It is presumably concluded that the wt% of silver nanoparticle, size distribution and homogenous dispersibility of Ag nanoparticles in the pastes are the critical factors for the high conductivity of the paste. Among the various wt% of silver nanoparticle in the conducting silver pastes, silver paste with 90 wt% of silver nanoparticle has the highest conductivity as 1.6×10⁴ S cm^?1. This conductivity value is 1.6 times higher than the Ag pastes which were prepared with silver nanoparticles obtained by thermolysis method.     

Antibacterial cotton fabric with in situ generated silver nanoparticles by one-step hydrothermal method

The cotton fabrics were immersed in 1–5?mM aqueous silver nitrate solutions maintained at 80°C for 24?h to in situ generate silver nanoparticles. The presence of silver nanoparticles in the nanocomposite films was proved by microscopic observation. Fourier transform infrared spectra indicated the role of hydroxyl and carboxyl groups of cotton fabric in reducing the silver salt to nanosilver. The nanocomposite cotton fabrics showed good antibacterial activity against Gram-negative and Gram-positive bacteria. The antibacterial cotton fabrics can be considered for medical applications such as surgical aprons, wound cleaning, and dressing.     

Matrix Recrystallization for MALDI-MS Imaging of Maize Lipids at High-Spatial Resolution

Matrix recrystallization is optimized and applied to improve lipid ion signals in maize embryos and leaves. A systematic study was performed varying solvent and incubation time. During this study, unexpected side reactions were found when methanol was used as a recrystallization solvent, resulting in the formation of a methyl ester of phosphatidic acid. Using an optimum recrystallization condition with isopropanol, there is no apparent delocalization demonstrated with a transmission electron microscopy (TEM) pattern and maize leaf images obtained at 10 μm spatial resolution.

Open image in new window

Graphical Abstract ?

     

Use of silver nanoparticles in spectrophotometry

Published data on the application of silver nanoparticles to spectrophotometry are summarized. Data on methods of synthesis of silver nanoparticles and their optical properties are presented. The main approaches to the spectrophotometric determination of substances using silver nanoparticles are discussed. Examples of the determination of metal ions, anions, and organic compounds are given.