Embedding color watermarks in color images based on Schur decomposition

In this paper, a blind dual color image watermarking scheme based on Schur decomposition is introduced. This is the first time to use Schur decomposition to embed color image watermark in color host image, which is different from using the binary image as watermark. By analyzing the 4 × 4 unitary matrix U via Schur decomposition, we can find that there is a strong correlation between the second row first column element and the third row first column element. This property can be explored for embedding watermark and extracting watermark in the blind manner. Since Schur decomposition is an intermediate step in SVD decomposition, the proposed method requires less number of computations. Experimental results show that the proposed scheme is robust against most common attacks including JPEG lossy compression, JPEG 2000 compression, low-pass filtering, cropping, noise addition, blurring, rotation, scaling and sharpening et al. Moreover, the proposed algorithm outperforms the closely related SVD-based algorithm and the spatial-domain algorithm.     

The 2-D growth of gold on single-layer graphene/Ru(0001): Enhancement of CO adsorption

The growth and morphology of two-dimensional (2-D) gold islands on a single-layer graphene supported on Ru(0001) have been studied by scanning tunneling microscopy (STM). Our findings show that gold exhibits 2-D structures up to a gold dosage of 0.75 equivalent monolayers, and that these 2-D gold islands are thermally stable at room temperature. Parallel polarization modulation infrared reflection absorption spectroscopic (PM-IRAS) and high resolution electron energy loss spectroscopic (HREELS) studies indicate that carbon monoxide (CO) adsorbs on these 2-D gold islands at 85 K, showing a characteristic CO stretching feature at 2095 cm^? 1 for a saturation coverage of CO. The red shift of the CO stretching frequency compared to that on charge neutral gold is consistent with electron transfer from graphene to gold, i.e., an electron-rich gold overlayer. Preliminary data obtained by dosing molecular oxygen onto this CO pre-covered surface suggest that the 2-D gold islands catalyze the oxidation of CO.     

Magnetic anticrossing of 1D subbands in ballistic double quantum wires

We study the low-temperature in-plane magnetoconductance of vertically coupled double quantum wires. Using a novel flip-chip technique, the wires are defined by two pairs of mutually aligned split gates on opposite sides of a  ≤ 1 micron thick AlGaAs/GaAs double quantum well heterostructure. We observe quantized conductance steps due to each quantum well and demonstrate independent control of each 1D wire. A broad dip in the magnetoconductance at  ∼ 6 T is observed when a magnetic field is applied perpendicular to both the current and growth directions. This conductance dip is observed only when 1D subbands are populated in both the top and bottom constrictions. This data is consistent with a counting model whereby the number of subbands crossing the Fermi level changes with field due to the formation of an anticrossing in each pair of 1D subbands.     

凸面光栅成像光谱仪图像数据实时压缩技术

凸面光栅成像光谱仪图像数据量巨大,给数据的传输和存储带来了压力,因此要对图像数据进行实时压缩。首先根据成像原理对图像数据的特点进行了分析,得出去除空间相关性和谱间相关性的压缩途径;然后,进行了压缩算法分析,提出了在谱间进行一阶线性预测、谱内进行JPEG2000压缩的三维压缩方案;最后,设计了基于FPGA+ADV212的实时压缩系统,其中FPGA用于逻辑控制和预测算法实现,ADV212用于JPEG2000压缩。分析结果表明:该系统具备无损和有损压缩能力,能够实现图像数据实时压缩。     

Application of self-collimated beams to realization of all optical photonic crystal encoder

In this paper a 4×2 optical encoder is proposed by employing the self-collimation effect in 2D photonic crystals. The total structure of the proposed device is a combination of so called “beam splitters” and “mirrors”. The simulation result indicates that, this design can operate as 4×2 optical encoder, the footprint of structure is about 69 µm×55 µm and response time is about 1.4 ps.     

Joint image encryption and compression scheme based on IWT and SPIHT

A joint lossless image encryption and compression scheme based on integer wavelet transform (IWT) and set partitioning in hierarchical trees (SPIHT) is proposed to achieve lossless image encryption and compression simultaneously. Making use of the properties of IWT and SPIHT, encryption and compression are combined. Moreover, the proposed secure set partitioning in hierarchical trees (SSPIHT) via the addition of encryption in the SPIHT coding process has no effect on compression performance. A hyper-chaotic system, nonlinear inverse operation, Secure Hash Algorithm-256(SHA-256), and plaintext-based keystream are all used to enhance the security. The test results indicate that the proposed methods have high security and good lossless compression performance.     

基于感兴趣区域的海洋卫星遥感图像压缩算法

针对海洋监视卫星遥感图像的特点,提出了一种基于感兴趣区域的自适应遥感图像近无损压缩算法。该算法利用红-黑小波提升方法检测出目标的边缘,采用阈值法将目标和背景分割,使用外接矩形来描述目标,从而自动确定感兴趣区域。感兴趣区域采用Rice无损熵编码方法,背景区域采用比特平面编码的有损压缩方法。实验结果表明,该算法能有效地划分感兴趣区域,其压缩比较无损压缩有了很大提高,目标无失真,整幅图像的峰值信噪比都在40dB以上。算法的计算复杂度较低,易于硬件实现,而且还具有自适应性和数据包独立的优点,适合于海洋监视卫星遥感图像近无损压缩应用。     

On coordinate transformations associated with the optical 1 + 1 lossless cubic–quintic Schrödinger equation

The mathematical structure of the transformations of coordinates involved in the optical 1 + 1 lossless cubic–quintic Schrödinger equation is investigated in relation to the amplitude and phase of the solitary-wave functions which are solutions to the equation in question. In fact, the above coordinate transformations are characterized algebraically by using matrices.     

基于可逆整数变换的高光谱图像无损压缩

将变换矩阵分解为三角可逆矩阵(TERM)实现的整数Karhunen-Loève变换(IKLT),具有结构简单、完全可逆和同址运算的优点.将整数KLT和整数小波结合(IWT),提出了一种基于可逆整数变换的去相关方法：将KLT用于去除谱间冗余,并在对KLT的变换矩阵进行TERM分解的过程中,提出基于全局最大值选择主元的优化分解方法,保证了IKLT的准确度,同时明显降低了计算量;空间维的去相关变换采用基于提升结构的整数小波变换,同样保证了变换的完全可逆.采用不同编码策略,对不同场景的高光谱图像数据压缩的实验结果表明,基于整数混合变换的去相关方法能明显提高无损压缩比.     

Quadratic detection with two-photon quantum well infrared photodetectors

Two-photon quantum well infrared photodetectors (QWIPs) involving three equidistant subbands take advantage of a resonantly enhanced optical nonlinearity, which is six orders of magnitude stronger than in a bulk semiconductor. This approach results in a sensitive device to measure quadratic autocorrelation of mid-infrared optical pulses from modelocked quantum cascade lasers, nonlinear optical conversion, and free-electron lasers (FEL). We report on autocorrelation measurements at wavelengths in the mid-infrared and Terahertz regimes using ps optical pulses from the FEL at the Forschungszentrum Dresden Rossendorf. In particular, quadratic detection at wavelengths around 5.5 μm is still possible at room-temperature, which is crucial for applications in practical systems. We also report on a two-photon detector which works below the Reststrahlen band at 42 μm (7.1 THz).     

Effect of porous material compression on the sound transmission of a covered single leaf panel

In this paper, the authors examine the effect of compressing a poroelastic fibrous layer lined with an isotropic plate on the sound transmission loss (TL). For this purpose, a 2-in. thick fibrous material and two isotropic plates with critical frequencies around 2300 Hz and 9700 Hz were used. The transfer matrix method was applied and the porous layer was assumed to have either a rigid, limp or elastic frame. Current models of compression are outlined, and measurements of the airflow resistivity as a function of compression show that these models are suitable only for low compression rates. TL predictions are compared next to experimental data in a range between 100 Hz and 10000 Hz for three compression rates, corresponding to 0%, 20% and 50%. The fibrous is uniformly compressed over 100% of its surface. Our experiments showed that compression reduces the TL by a maximum of 5 dB for a 50% compression, mainly at the mid-frequency range, around 800 Hz. This is due to a resonance in the thickness of the porous material, increasing the radiation efficiency of the structure at mid-frequencies. Moreover, reduction of the porous thickness and increase of the airflow resistivity with compression are the variations influencing the most the TL of the structure. These trends were also detected with the limp and rigid frame models but with a lower degree of accuracy compared to the elastic frame model.     

Orientational dependence of hole effective masses in quantum-well laser structures

Valence energy subbands and hole effective masses for quantum-well structures have been calculated, using GaInAs–InGaAsP and GaAs–AlGaAs material systems as an example. A Luttinger–Kohn 4 ×  4 hamiltonian with heavy-hole and light-hole band mixing was used in the calculations. Systematic numerical results have been presented for a range of growth directions, material parameters and quantum well widths.     

Relative reactivities of amino and ethenyl groups in allylamine on Si(100)2 × 1: Temperature-dependent X-ray photoemission and thermal desorption studies of a common linker molecule

The room-temperature adsorption and thermal evolution of allylamine on Si(100)2 × 1 have been investigated by using temperature-dependent X-ray photoelectron spectroscopy (XPS) and thermal desorption spectrometry (TDS). The presence of a broad N 1 s feature at 398.9 eV, attributed to a N―Si bond, indicates N―H dissociative adsorption. On the other hand, the presence of C 1 s features at 284.6 eV and 286.2 eV, corresponding to C═C and C―N, respectively, and the absence of the Si―C feature expected at 283.2 eV shows that [2 + 2] C═C cycloaddition does not occur at room temperature. These XPS data are consistent with the unidentate staggered and eclipsed allylamine conformer adstructures arising from N―H dissociation and not [2 + 2] C═C cycloaddition. The apparent conversion of the N 1 s feature for Si―N(H)―C

at 398.9 eV to that for Si―N(H) at 397.7 eV and the total depletion of C 1 s feature for C―N at 286.2 eV near 740 K indicates cleavage of the C―N bond, leaving behind a Si―N(H) radical. Furthermore, the C═C C 1 s feature at 284.6 eV undergoes steep intensity reduction between 740 K and 825 K, above which a new C 1 s feature at 283.2 eV corresponding to SiC is found to emerge. These spectral changes suggest total dissociation of the ethenyl fragment and the formation of SiC. Moreover, while the total N 1 s intensity undergoes a minor reduction (24%) upon annealing up to 1090 K, a considerable reduction (43%) is found in the overall C 1 s intensity. This observation is consistent with our TDS data, which shows the desorption of C-containing molecules including propene and ethylene at 580 K and of acetylene at 700 K. The lack of N-containing desorbates suggests that the dissociated N species are likely bonded to multiple surface Si atoms or diffused into the bulk. Interestingly, both the staggered and eclipsed N―H dissociative adstructures are found to have a less negative adsorption energy than the [N, C, C] tridentate or the [2 + 2] C═C cycloaddition adstructures by our DFT calculations, which suggests that the observed formation of N―H dissociative adstructures is kinetically favored on the Si(100)2 × 1 surface.     

Fabrication of broadband poly(vinylidene difluoride-trifluroethylene) line-focus ultrasonic transducers for surface acoustic wave measurements of anisotropy of a (1 0 0) silicon wafer

This paper investigates a new method for fabrication of broadband line-focus ultrasonic transducers by sol–gel spin-coating the poly(vinylidene difluoride-trifluroethylene) [P(VDF-TrFE)] copolymer film on a concave fine-polished beryllium copper backing. The ferroelectric hysteresis loops of the P(VDF-TrFE) films spin-coated from different molar ratios of VDF/TrFE, 77/23 and 55/45, were measured to select the better mixture. Owing to the better acoustic matching to water, compared with lead zirconate titanate (PZT), the fabricated transducers show relatively wide bandwidth of approximately 50 MHz with high central frequency of 60 MHz obtained at the focal plane when a fused-quartz acts as a reflecting target. Each one of the two finished transducers has a focal length of 5 mm and a full aperture angle of 90°. After applying the specially developed digital signal processing algorithm to the defocusing experiment data, which is called V(f,z) analysis method based on two-dimensional fast Fourier transform (2-D FFT), the operating frequency can extend from several MHz to over 90 MHz. Surface acoustic wave (SAW) velocities of a typical (1 0 0) silicon wafer was measured along various directions between [1 0 0] and [0 1 0] to represent the anisotropic features.     

Landau-level interplay in InGaAs double quantum wells

Shubnikov–de Haas (SdH) and Hall measurements have been used to investigate a pair of adjacent two-dimensional electron gases (2DEGs) which were formed in two n_0.53Ga_0.47As quantum-wells, separated by a thin In_0.52Al_0.48As barrier, grown lattice-matched on InP. This double quantum-well system consists of two asymmetric InGaAs quantum wells, 9 nm and 7 nm respectively, separated by a 4.5 nm InAlAs barrier. The existence of two occupied electronic subbands with differing electron densities can clearly be identified by beating effects in the SdH oscillations. By applying a substrate bias the electron densities can be tuned and the beating is shifted. In the simultaneously performed Hall measurements additional features can be observed: Hall measurements with different total electron densities reveal plateaus for integer filling factors ν (with ν = ν₁ + ν₂, ν₁and ν₂both integers, corresponding to the two subbands). Some even filling factors become suppressed and recover with changing electron density. Also, for some densities an odd filling factor is observed. The systematic tuning of the electron densities via the application of a bias voltage to the front gate reveals two Landau fans, one for each electronic system, respectively, crossing each other. The electron densities for both electronic systems can be identified by analysing the SdH spectra. As a function of the front-gate voltage, these densities seem to show evidence for an anticrossing of the two electronic states and therefore for a strong coupling between the states.     

High speed and high accuracy inspection of in-tray laser IC marking using line scan CCD with a new calibration model

This study used a high-speed high-resolution line scan CCD, and a Delta motor drive module to provide position feedback in a laser marking system. Based on a novel algorithm, image processing of the high-speed CCD scan was allowed the accurate determination of the laser marking location. This system was calibrated using a template, and a novel 1-D calibration model of the line scan CCD was developed. The relevant position of each IC in the tray was obtained based on the calibration algorithm. Gain and offset calibration, sub-pixel calculation, and normalized checks were performed in this automatic optical inspection system. The total processing time for laser correction marking, scanning and identification was about 2～2.5 s, the positioning accuracy was×9 μm, and the industrial specification and process capability index Cpk reached over 1.2.     

High speed ultra short pulse fiber ring laser using photonic crystal fiber nonlinear optical loop mirror

A scheme to generate high speed optical pulse train with ultra short pulse width is proposed and experimentally studied. Two-step compression is used in the scheme: 20 GHz and 40 GHz pulse trains generated from a rational harmonic actively mode-locked fiber ring laser is compressed to a full width at half-maximum (FWHM) of ~ 1.5 ps using adiabatic soliton compression with dispersion shifted fibers (DSF). The pulse trains then undergo a pedestal removal process by transmission through a cascaded two photonic crystal fiber (PCF)-nonlinear optical loop mirrors (NOLM) realized using a double-ring structure. The shortest output pulse width obtained was ~ 610 fs for 20 GHz pulse train and ~ 570 fs for 40 GHz pulse train. The signal to noise ratio of the RF spectrum of the output pulse train is larger than 30 dB. Theoretical simulation of the NOLM transmission is conducted using split-step Fourier method. The results show that two cascaded NOLMs can improve the compression result compared to that for a single NOLM transmission.     

Application of robust color composite fringe in flip-chip solder bump 3-D measurement

This study developed a 3-D measurement system based on flip-chip solder bump, used fringes with different modulation intensities in color channels, in order to produce color composite fringe with robustness, and proposed a multi-channel composite phase unwrapping algorithm, which uses fringe modulation weights of different channels to recombine the phase information for better measurement accuracy and stability. The experimental results showed that the average measurement accuracy is 0.43μm and the standard deviation is 1.38 µm. The results thus proved that the proposed 3-D measurement system is effective in measuring a plane with a height of 50 μm. In the flip-chip solder bump measuring experiment, different fringe modulation configurations were tested to overcome the problem of reflective coefficient between the flip-chip base board and the solder bump. The proposed system has a good measurement results and robust stability in the solder bump measurement, and can be used for the measurement of 3-D information for micron flip-chip solder bump application.     

Real-time sensing and three-dimensional display of far outdoor scenes based on asymmetric integral imaging

A new asymmetric integral imaging (AII) system for real-time pickup and three-dimensional (3-D) display of far outdoor scenes based on dynamic-pixel-mapping (DPM) is proposed. DPM is a digital process to transform the elemental images captured with a lens array into the perspective-variant object images (POIs) whose structures are matched with those of display lenses, where the orders of pixels in each POI are reversely mapped, and then capture a set of virtual elemental images (EIs) at the specific depth planes from the back-propagated POIs. This DPM enables an asymmetrical use of pickup and display lens arrays, allowing the long-ranged pickup of far outdoor scenes and their resolution-enhanced 3-D reconstruction. Experiments with a pair of pickup and display lens arrays whose pitches and focal lengths are given by 7.5 mm, 30 mm and 1.2 mm, 8 mm, respectively, show that the effective pickup-range and resolution of the proposed system have been increased up to 6 m and 1600×1600 pixels, respectively, from 0.064 m and 480×480 pixels of the conventional systems employing the same pickup and display lens arrays. In addition, experiments with an implemented test bed confirms that the proposed system can provide real-time 3-D images in 25 frames per second.     

Large-scale synthesis and growth habit of 3-D flower-like crystal of PbTe

In this paper, 3-D flower-like crystal of PbTe was successfully synthesized using Pb(CH₃COO)₂·3H₂O and Na₂TeO₃ as precursors under hydrothermal conditions, and characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction pattern (XRD). The reaction parameters that influenced the evolution of PbTe synthesis and morphology were investigated. It was shown that the flower-like crystal of PbTe was composed of a nucleus with eight pods. A possible growth mechanism was proposed based on the calculation of the surface energies of PbTe and the SEM observation. Furthermore, the temperature-dependent transport properties of 3-D flower-like crystal of PbTe specimen have been evaluated with an average thermoelectric power of 120 S cm^?1 and electrical conductivity of 220 μV K^?1 at 740 K.