Exquisite Synthesis of a Designed PAR‐1 Antagonist

The synthesis of a designed, sterically congested geminal dimethyl‐bearing PAR‐1 antagonist was achieved by a route of ten steps, with the oxidation of an electron‐rich benzaldehyde, the construction of a tertiary alkyl azide, and the selective hydrogenolysis of a 1,5‐fused tetrazole to generate the cyclic amidine with Raney‐Ni being the key steps. The selective hydrogenolysis of 1,5‐fused tetrazole to generate the cyclic amidine with Raney‐Ni was discovered and may be generally used for the synthesis of structurally unusual cyclic amidines. Several unsuccessful attempts to construct the desired geminal dimethyl‐bearing cyclic amidine were also discussed.     

5‐(2‐Mercaptoethyl)‐1H‐tetrazole: Facile Synthesis and Application for the Preparation of Water Soluble Nanocrystals and Their Gels

A facile method for the preparation of the novel capping ligand 5‐(2‐mercaptoethyl)‐1H‐tetrazole for the stabilization of water‐soluble nanocrystals was developed. This effective synthetic procedure is based on the cycloaddition of sodium azide to 3,3′‐dithiobis(propionitrile) followed by the reductive cleavage of a S?S bond with triphenylphosphine. The structure of the synthesized compound was confirmed by single‐crystal X‐ray analysis. A target tetrazole was successfully applied for the direct aqueous synthesis of CdTe and Au nanocrystals. CdTe nanocrystals capped with 5‐(2‐mercaptoethyl)‐1H‐tetrazole were found to reveal high photoluminescence efficiencies (up to 77 %). Nanocrystals capped with this tetrazole ligand are able to build 3D structures in a metal‐ion‐assisted gelation process in aqueous solution. Critical point drying of the as‐formed hydrogels allowed the preparation of the corresponding aerogels, while preserving the mesoporous structure.     

α‐Amino Acid‐Isosteric α‐Amino Tetrazoles

The synthesis of all 20 common natural proteinogenic and 4 otherα‐amino acid‐isosteric α‐amino tetrazoles has been accomplished, whereby the carboxyl group is replaced by the isosteric 5‐tetrazolyl group. The short process involves the use of the key Ugi tetrazole reaction followed by deprotection chemistries. The tetrazole group is bioisosteric to the carboxylic acid and is widely used in medicinal chemistry and drug design. Surprisingly, several of the common α‐amino acid‐isosteric α‐amino tetrazoles are unknown up to now. Therefore a rapid synthetic access to this compound class and non‐natural derivatives is of high interest to advance the field.     

Cobalt‐Catalyzed CH Arylations with Weakly‐Coordinating Amides and Tetrazoles: Expedient Route to Angiotensin‐II‐Receptor Blockers

Cobalt‐catalyzed C?H arylations enabled the synthesis of biaryl tetrazoles, which are key structural motifs in antihypertensive angiotensin‐II‐receptor blockers. Thus, weakly‐coordinating benzamides were employed for step‐economical C?H arylations with ample scope. Further, a low‐valent NHC complex enabled first cobalt‐catalyzed C?H functionalization by tetrazole assistance.     

UV‐Induced Tetrazole‐Thiol Reaction for Polymer Conjugation and Surface Functionalization

A UV‐induced 1,3‐dipolar nucleophilic addition of tetrazoles to thiols is described. Under UV irradiation the reaction proceeds rapidly at room temperature, with high yields, without a catalyst, and in both polar protic and aprotic solvents, including water. This UV‐induced tetrazole‐thiol reaction was successfully applied for the synthesis of small molecules, protein modification, and rapid and facile polymer–polymer conjugation. The reaction has also been demonstrated for the formation of micropatterns by site‐selective surface functionalization. Superhydrophobic–hydrophilic micropatterns were successfully created by sequential modifications of a tetrazole‐modified porous polymer surface with hydrophobic and hydrophilic thiols. A biotin‐functionalized surface could be fabricated in aqueous solutions under long‐wavelength UV irradiation.     

Synthesis of Novel Tetrazole Containing Quinoline and 2,3,4,9‐Tetrahydro‐1H‐β‐Carboline Derivatives

This presentation describes the successful synthesis of novel tetrazole‐based quinoline and tetrahydro‐1H‐β‐carboline derivatives via one‐pot multicomponent reactions in moderate to good yields. These reactions have presumably proceeded through Ugi‐azide or Ugi‐azide/Pictet–Spengler processes, respectively.     

A Self‐Reporting Tetrazole‐Based Linker for the Biofunctionalization of Gold Nanorods

A photochemical approach based on nitrile imine‐mediated tetrazole‐ene cycloaddition is introduced to functionalize gold nanorods with biomolecules. For this purpose, a bifunctional, photoreactive linker containing thioctic acid as the Au anchoring group and a tetrazole moiety for the light‐induced reaction with maleimide‐capped DNA was prepared. The tetrazole‐based reaction on the nanoparticles’ surface results in a fluorescent pyrazoline product allowing for the spectroscopic monitoring of the reaction. This first example of nitrile imine‐mediated tetrazole‐ene cycloaddition (NITEC)‐mediated biofunctionalization of Au nanorods paves the way for the attachment of sensitive biomolecules, such as antibodies and other proteins, under mild conditions and expands the toolbox for the tailoring of nanomaterials.     

MNPs‐NHC6H4SO3H as high‐performance catalyst for the synthesis of 1,4‐diazepines containing tetrazole ring under microwave irradiation

MNPs‐NHC₆H₄SO₃H as an efficient catalyst was prepared and characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM), DLS dynamic light scattering (DLS), and thermogravimetric analysis (TGA) techniques. The catalytic activity of MNPs‐NHC₆H₄SO₃H was investigated in the synthesis of 1,4‐diazepines containing the tetrazole ring via a four‐component reaction under microwave irradiation. The heterogeneous catalyst could be recovered easily and reused six times without significant loss of its catalytic activity. The present work demonstrates the advantages of microwave irradiation‐assisted heterogeneous catalysis in the synthesis of 1,4‐diazepines containing the tetrazole ring, compounds that generate great attention in many applications, particularly in medicinal chemistry and drug discovery.     

Two derivatives of 5‐amino­tetrazole: 5‐amino‐1‐phenyl­tetrazole and 5‐amino‐1‐(1‐naphthyl)­tetrazole

In the mol­ecules of 5‐amino‐1‐phenyl­tetrazole, C₇H₇N₅, (I), and 5‐amino‐1‐(1‐naphthyl)­tetrazole, C₁₁H₉N₅, (II), the tetrazole rings and aryl fragments are not coplanar; corresponding dihedral angles are 50.58 (5) and 45.19 (7)° for the two independent mol­ecules of (I), and 64.14 (5)° for (II). Intermolecular N—H⋯N hydrogen bonds between the amino groups and tetrazole N atoms are primarily responsible for formation of two‐dimensional networks extending parallel to the bc plane in both compounds. The presence of the amino group has a distinct effect on the geometry of the tetrazole rings in each case.     

The layered structure of poly­[[di‐μ‐chloro‐bis­[chloro(2‐ethyl­tetrazole‐κN4)copper(II)]]‐di‐μ‐2‐ethyl­tetrazole‐κ2N1:N4]

In the polymeric title complex, [CuCl₂(C₃H₆N₄)₂]_n, there are two ligands in the asymmetric unit. The Cu atom adopts an elongated octahedral geometry, with two 2‐ethyl­tetrazole ligands [Cu—N = 2.0037 (16) and 2.0136 (16) Å] and two Cl atoms [Cu—Cl = 2.2595 (6) and 2.2796 (6) Å] in equatorial positions. A Cl atom and a symmetry‐related 2‐ethyl­tetrazole mol­ecule [Cu—Cl = 2.8845 (8) Å and Cu—N = 2.851 (2) Å] lie in the axial positions of the octahedron. One of the two 2‐­ethyltetrazole ligands of the asymmetric unit exhibits bidentate binding to two Cu atoms through two N atoms of the tetrazole ring, whereas the other ligand is coordinated in a monodentate fashion via one tetrazole N atom. The Cu‐atom octahedra form dimer entities by sharing edges with equatorial and axial Cl atoms. The dimers are linked together through the 2‐ethyl­tetrazole ligands to form one‐dimensional polymeric zigzag chains extending along the b axis. The chains are connected into infinite layers parallel to the (10) plane via the 2‐ethyl­tetrazole ligands.     

Synthesis and Characterization of the New Heterocycle 5‐(4‐Amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole and Some Ionic Nitrogen‐Rich Derivatives

A new heterocycle consisting of a tetrazole ring attached to an amino‐triazolone ring, namely 5‐(4‐amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole ( 3 ) as well as its ammonium ( 2 ), hydroxylammonium ( 3 ), and sodium salt ( 4 ), is introduced. Its ammonium salt ( 2 ) is formed starting from tetrazole‐5‐carboxamide oxime ( 1 ), which is reacted with diaminourea (carbonyldihydrazide) in aqueous media. All compounds 2 , 3 , 4 , 5 were structurally characterized by single crystal X‐ray diffraction. The thermal behavior was investigated using differential scanning calorimetry, and the sensitivities towards impact, friction, and electrostatic discharge were determined. Furthermore, several detonation parameters were calculated with the program EXPLO5 to determine the potential use of these compounds as highly energetic materials.     

Direct Synthesis and Characterization of New Copper(II) and Zinc(II) 5‐R‐Tetrazolato Complexes [R = Me,Ph, 4‐Py] with Ethylenediamine and DMSO as Coligands

Three novel 5‐R‐tetrazolato complexes (R = Me, Ph, 4‐Py), namely [Zn₂(MeCN₄)₄(DMSO)₂] ( 1 ), [Cu₂(PhCN₄)₄(en)₂] · 2DMSO ( 2 ), and [Cu(4‐PyCN₄)₂(DMSO)₂] · 4DMSO ( 3 ), were isolated as unexpected products under attempts to prepare heterometallic tetrazolates using a direct synthesis strategy in the Cu⁰‐ZnO‐en‐RCN₄H‐DMSO system (en = ethylenediamine). The prepared compounds were characterized by elemental, single‐crystal X‐ray, and thermal analyses, and IR spectroscopy. Variation of the 5‐substituent of the tetrazole ring causes different composition of complexes 1 – 3 and diverse coordination modes of 5‐R‐tetrazolato ligands. Complex 1 is a 3D coordination polymer due to N1, N4‐bridging of 5‐methyltetrazolato anions. Complex 2 , with en as a coligand, has a dinuclear structure with two copper atoms linked together by two 5‐phenyltetrazolato ligands by tetrazole N2, N3 bridges. Complex 3 represents a 2D coordination polymer, formed due to 5‐(4‐pyridyl)tetrazolato bridges between adjacent copper atoms (with the tetrazole and pyridine rings nitrogen atoms as coordination centers). DMSO molecules, included in all the compounds, are solvate and/or coordinated ones.     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

The Effectivity of 1H‐Triazoles and ‐Tetrazoles as Activators in Acid‐Catalyzed Phosphoramidite Alcoholysis

The efficiency of 5‐nitro‐1,2,4‐1H‐triazole ( 3 ), 5‐(methylthio)‐1H‐tetrazole ( 4 ), and 5‐(4‐nitrophenyl)‐1H‐tetrazole ( 5 ) as activators in phosphoramidite alcoholysis has been studied relative to 1H‐tetrazole ( 6 ). Reactions of these azoles with diisopropyl (diisopropylamido)phosphite ( 1a ) were followed in THF, and the rates were found to increase with increasing acidity of the azoles. The Brønsted α value of 0.7 determined for this dependence is in agreement with data published earlier.     

Docking,Synthesis, Spectral Characterization,and Evaluation of In Vitro Antifungal Activity of Bis/Monophenyl‐1‐aryl‐1H‐tetrazole‐5‐carboxylate

Some novel compounds of bis/monophenyl‐1‐aryl‐1H‐tetrazole‐5‐carboxylate were synthesized by the equimolar reaction between bis/mono‐1‐aryl‐1H‐tetrazole and phenyl chloroformate in the presence of NaOH in dry tetrahydrofuran. The content was stirred for 4 h at room temperature. Structures of these synthesized compounds were characterized by IR, ¹H‐NMR, ¹³C‐NMR, and mass spectrometric methods. The in vitro antifungal activity study demonstrates that results of compounds 6g and 6h are excellent, 6e a comparatively good one, and other compounds are moderate. The C docker energy of compounds 6g and 6h were ?38.22 and ?32.62 kcal/mol and that of compound 6e was ?21.26 kcal/mol.     

Eco‐friendly synthesis of 3,4‐dihydroquinoxalin‐2‐amine,diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives with the aid of MCM‐48/H5PW10V2O40

A heterogeneous material composed of MCM‐48/H₅PW₁₀V₂O₄₀ was produced and used as an efficient, eco‐friendly and highly recyclable catalyst for the one‐pot and multicomponent synthesis of 3,4‐dihydroquinoxalin‐2‐amine, diazepine‐tetrazole and benzodiazepine‐2‐carboxamide derivatives in aqueous media and at room temperature with high yields in short reaction times (40–60 min). The recoverable catalyst was easily recycled at least five times without any loss of catalytic activity. The structures of obtained products were confirmed using ¹H NMR and ¹³C NMR spectra.     

Comparison of 1‐Ethyl‐5H‐tetrazole and 1‐Azidoethyl‐5H‐tetrazole as Ligands in Energetic Transition Metal Complexes

Energetic coordination compounds (ECC) based on 3d or 4d transition metals show promising characteristics to be used as potential replacements for highly toxic lead‐containing primary explosives. Herein we report the synthesis of 12 new ECC based on 1‐azidoethyl‐5H‐tetrazole (AET) or 1‐ethyl‐5H‐tetrazole (1‐ETZ) as nitrogen‐rich ligands as well as various central metals (Cu²⁺, Fe²⁺, Zn²⁺, Ag⁺) and anions such as perchlorate and nitrate. The influence of the increased endothermicity by adding an additional azide group was studied by comparing analogous ECC based on AET and 1‐ETZ. Furthermore, the compounds were extensively analyzed by XRD, IR, EA, solid‐state UV/Vis, and DTA as well as their sensitivities toward impact and friction were determined with BAM standard techniques, together with their sensitivity against electrostatic discharge. The sensitivities were compared with the one toward ball drop impact measurements. Classical initiation tests (nitropenta filled detonators) and ignition by laser irradiation highly prove the potential use of the most promising compounds in lead‐free initiation systems.     

An approach to novel fused triazole or tetrazole derivatives starting from benzimidazo[1,2‐a]quinazoline‐5(7H)‐one and 5,7‐dihydro‐5‐oxopyrido[3′,2′:5,6]pyrimido[1,2‐a]benzimidazole

The synthetic potential of the title compounds benzimidazo[1,2‐a]quinazoline‐5(7H)‐one 2a and 5,7‐dihydro‐5‐oxopyrido[3′,2′:5,6]pyrimido[1,2‐a]benzimidazole 2b for the construction of novel polyhetero‐cyclic frameworks is reported. Compounds 2a,b , by conversion into their thio analogues 3a,b , were used for the synthesis of tetrazole ( 5a,b ) and triazole ( 7a,b ) derivatives, as well as for an unexpected synthesis of tri‐azoles 8a,b , isomers of 7a,b , resulting from the occurrence of a Dimroth rearrangement.     

Catalytic Synthesis of 5‐Substituted Tetrazoles: Unexpected Reactions and Products

Tetrazoles are incredibly useful organic molecules with a wide range of applications from medicinal chemistry as carboxylic acid isosteres to high energy density materials in space research. In an effort to develop an easy protocol for the synthesis of tetrazoles from nitriles, we used nano‐Ag‐TiO₂ as an efficient heterogeneous catalyst for the reaction of various nitriles and sodium azide to afford 5‐substituted tetrazoles in excellent yields. By this method, a wide variety of aryl nitriles underwent [3 + 2] cycloaddition to afford tetrazoles in excellent yields. Further reaction of tetrazoles with ethylchloroacetate resulted in the formation of expected products, except for a bis‐tetrazole, which underwent ring opening and subsequent reaction to afford an unusual product. The bis‐tetrazole also formed an unusual polymeric sodium complex in aq. NaOH solution. X‐ray crystallography revealed a distorted octahedral geometry for the complex, which forms a three‐dimensional network of chains interlinked by bis‐tetrazole moieties through a network of H‐bonds.