Triggering Gel Formation and Luminescence through Donor–Acceptor Interactions in a C3‐Symmetric Tris(pyrene) System

Straightforward modulation of the gelation, absorption and luminescent properties of a tris(pyrene) organogelator containing a C₃‐symmetric benzene‐1,3,5‐tricarboxamide central unit functionalized by three 3,3′‐diamino‐2,2′‐bipyridine fragments is achieved through donor–acceptor interactions in the presence of tetracyanoquinodimethane.     

Charge Separation in Graphene‐Decorated Multimodular Tris(pyrene)–Subphthalocyanine–Fullerene Donor–Acceptor Hybrids

A new approach to probe the effect of graphene on photochemical charge separation in donor–acceptor conjugates is devised. For this, multimodular donor–acceptor conjugates, composed of three molecules of pyrene, a subphthalocyanine, and a fullerene C₆₀ ((Pyr)₃SubPc‐C₆₀), have been synthesized and characterized. These systems were hybridized on few‐layer graphene through π–π stacking interactions of the three pyrene moieties. The hybrids were characterized using Raman, HRTEM, and spectroscopic and electrochemical techniques. The energy levels of the donor–acceptor conjugates were fine‐tuned upon interaction with graphene and photoinduced charge separation in the absence and presence of graphene was studied by femtosecond transient absorption spectroscopy. Accelerated charge separation and recombination was detected in these graphene‐decorated conjugates suggesting that they could be used as materials for fast‐responding optoelectronic devices and in light energy harvesting applications.     

Cover Picture: Switchable Ambient‐Temperature Singlet–Triplet Dual Emission in Nonconjugated Donor–Acceptor Triarylboron–PtII Complexes (Chem. Eur. J. 25/2009)

Singlet–triplet dual emission has been achieved in single molecules containing triarylboron and N‐(2′‐pyridyl)‐7‐azaindole chromophores. The structure of a Pt^(II) complex and its dual emission spectrum are depicted in the cover picture. In their Full Paper on page 6131 ff., S. Wang et al. demonstrate that metal chelation and nonconjugated chromophores with a common excitation wavelength facilitate singlet and triplet dual emission in solution at ambient temperature that originate from two separate parts of the molecule.

     

Luminescence Properties of C‐Diazaborolyl‐ortho‐Carboranes as Donor–Acceptor Systems

Seven derivatives of 1,2‐dicarbadodecaborane (ortho‐carborane, 1,2‐C₂B₁₀H₁₂) with a 1,3‐diethyl‐ or 1,3‐diphenyl‐1,3,2‐benzodiazaborolyl group on one cage carbon atom were synthesized and structurally characterized. Six of these compounds showed remarkable low‐energy fluorescence emissions with large Stokes shifts of 15100–20260 cm^?1 and quantum yields (Φ_F) of up to 65 % in the solid state. The low‐energy fluorescence emission, which was assigned to a charge‐transfer (CT) transition between the cage and the heterocyclic unit, depended on the orientation (torsion angle, ψ) of the diazaborolyl group with respect to the cage C? C bond. In cyclohexane, two compounds exhibited very weak dual fluorescence emissions with Stokes shifts of 15660–18090 cm^?1 for the CT bands and 1960–5540 cm^?1 for the high‐energy bands, which were assigned to local transitions within the benzodiazaborole units (local excitation, LE), whereas four compounds showed only CT bands with Φ_F values between 8–32 %. Two distinct excited singlet‐state (S₁) geometries, denoted S₁(LE) and S₁(CT), were observed computationally for the benzodiazaborolyl‐ortho‐carboranes, the population of which depended on their orientation (ψ). TD‐DFT calculations on these excited state geometries were in accord with their CT and LE emissions. These C‐diazaborolyl‐ortho‐carboranes were viewed as donor–acceptor systems with the diazaborolyl group as the donor and the ortho‐carboranyl group as the acceptor.     

Electron Donor–Acceptor Interactions in Regioselectively Synthesized exTTF2–C70(CF3)10 Dyads

The decakis(trifluoromethyl)fullerene C₁‐C₇₀(CF₃)₁₀, in which the CF₃ groups are arranged on a para⁷‐meta‐para ribbon of C₆(CF₃)₂ edge‐sharing hexagons, and which has now been prepared in quantities of hundreds of milligrams, was reacted under standard Bingel–Hirsch conditions with a bis‐π‐extended tetrathiafulvalene (exTTF) malonate derivative to afford a single exTTF₂–C₇₀(CF₃)₁₀ regioisomer in 80 % yield based on consumed starting material. The highly soluble hybrid was thoroughly characterized by using 1D ¹H, ¹³C, and ¹⁹F NMR, 2D NMR, and UV/Vis spectroscopy; matrix‐assisted laser desorption ionization (MALDI) mass spectrometry; and electrochemistry. The cyclic voltammogram of the exTTF₂–C₇₀(CF₃)₁₀ dyad revealed an irreversible second reduction process, which is indicative of a typical retro‐Bingel reaction; whereas the usual phenomenon of exTTF inverted potentials (${E{{1\hfill \atop {\rm ox}\hfill}}}$ >${E{{2\hfill \atop {\rm ox}\hfill}}}$ ), resulting in a single, two‐electron oxidation process, was also observed. Steady‐state and time‐resolved photolytic techniques demonstrated that the C₁‐C₇₀(CF₃)₁₀ singlet excited state is subject to a rapid electron‐transfer quenching. The resulting charge‐separated states were identified by transient absorption spectroscopy, and radical pair lifetimes of the order of 300 ps in toluene were determined. The exTTF₂–C₇₀(CF₃)₁₀ dyad represents the first example of exploitation of the highly soluble trifluoromethylated fullerenes for the construction of systems able to mimic the photosynthetic process, and is therefore of interest in the search for new materials for photovoltaic applications.     

Charge‐Transfer Interactions in Tris‐Donor–Tris‐Acceptor Hexaarylbenzene Redox Chromophores

Symmetric‐ and asymmetric hexaarylbenzenes (HABs), each substituted with three electron‐donor triarylamine redox centers and three electron‐acceptor triarylborane redox centers, were synthesized by cobalt‐catalyzed cyclotrimerization, thereby forming compounds with six‐ and four donor–acceptor interactions, respectively. The electrochemical‐ and photophysical properties of these systems were investigated by cyclovoltammetry (CV), as well as by absorption‐ and fluorescence spectroscopy, and compared to a HAB that only contained one neighboring donor–acceptor pair. CV measurements of the asymmetric HAB show three oxidation peaks and three reduction peaks, whose peak‐separation is greatly influenced by the conducting salt, owing to ion‐pairing and shielding effects. Consequently, the peak‐separations cannot be interpreted in terms of the electronic couplings in the generated mixed‐valence species. Transient‐absorption spectra, fluorescence‐solvatochromism, and absorption spectra show that charge‐transfer states from the amine‐ to the boron centers are generated after optical excitation. The electronic donor–acceptor interactions are weak because the charge transfer has to occur predominantly through space. Moreover, the excitation energy of the localized excited charge‐transfer states can be redistributed between the aryl substituents of these multidimensional chromophores within the fluorescence lifetime (about 60 ns). This result was confirmed by steady‐state fluorescence‐anisotropy measurements, which further indicated symmetry‐breaking in the superficially symmetric HAB. Adding fluoride ions causes the boron centers to lose their accepting ability owing to complexation. Consequently, the charge‐transfer character in the donor–acceptor chromophores vanishes, as observed in both the absorption‐ and fluorescence spectra. However, the ability of the boron center as a fluoride sensor is strongly influenced by the moisture content of the solvent, possibly owing to the formation of hydrogen‐bonding interactions between water molecules and the fluoride anions.     

Molecular Design of Thermally Activated Delayed‐Fluorescent Emitters Using 2,2′‐Bipyrimidine as the Acceptor in Donor–Acceptor Structures

Donor–acceptor–donor (D–A–D)‐type thermally activated delayed fluorescence (TADF) emitters 5,5′‐bis{4‐[9,9‐dimethylacridin‐10(9H )‐yl]phenyl}‐2,2′‐bipyrimidine (Ac‐bpm) and 5,5′‐bis[4‐(10H ‐phenoxazin‐10‐yl)phenyl]‐2,2′‐bipyrimidine (Px‐bpm), based on the 2,2′‐bipyrimidine accepting unit, were developed and their TADF devices were fabricated. The orthogonal geometry between the donor unit and the 2,2′‐bipyrimidine accepting core facilitated a HOMO/LUMO spatial separation, thus realizing thermally activated delayed fluorescence. The exhibited electroluminescence ranged from green to yellow, depending on the donor unit, with maximum external quantum efficiencies of up to 17.1 %.     

Rational Design for Complementary Donor–Acceptor Recognition Pairs Using Self‐Complementary Hydrogen Bonds

An adaptable and efficient molecular recognition pair has been established by taking advantage of the complementary nature of donor–acceptor interactions together with the strength of hydrogen bonds. Such distinct molecular recognition propagates in orthogonal directions to effect extended alternating co‐assembly of two different appended molecular entities. The dimensions of the assembled structures can be tuned by stoichiometric imbalance between the donor and acceptor building blocks. The morphology of the self‐assembled material can be correlated with the ratio of the two building blocks.     

(3+3)‐Annulation of Donor–Acceptor Cyclopropanes with Diaziridines

The first example of (3+3)‐annulation of two different three‐membered rings is reported herein. Donor‐acceptor cyclopropanes in reaction with diaziridines were found to afford perhydropyridazine derivatives in high yields and diastereoselectivity under mild Lewis acid catalysis. The disclosed reaction is applicable for the broad substrate scope and exhibits an excellent functional group tolerance.     

Multistimuli‐Responsive Luminescence Switching of Pyrazine Derivative Based Donor–Acceptor–Donor Luminophores

Three symmetrical donor–acceptor–donor (D–A–D) luminophores ( C1 , C2 , and C3 ) with pyrazine derivatives as electron‐withdrawing groups have been developed for multistimuli‐responsive luminescence switching. For comparison, reference compounds R1 and R2 without the pyrazine moiety have also been synthesized. Intramolecular charge transfer (ICT) interactions can be found for all D–A–D luminophores owing to the electron‐withdrawing properties of the two imine nitrogen atoms in the pyrazine ring and the electron‐donating properties of the other two amine nitrogen atoms in the two triphenylamine units. Moreover, luminophores C1 , C2 , and C3 exhibit “on–off–on” luminescence switching properties in mixtures of water/tetrahydrofuran with increasing water content, which is different from the “on–off” switching for typical aggregation‐caused quenching (ACQ) materials and “off–on” switching for traditional aggregation‐induced emission (AIE) materials. Additionally, upon grinding the pristine samples, luminophores C1 , C2 , and C3 display bathochromically shifted photoluminescence maxima that can be recovered by either solvent fuming or thermal annealing treatments. The piezofluorochromic (PFC) properties are more pronounced than those for reference compounds R1 and R2 , which indicates that D–A molecules have the ability to amplify the PFC effect by tuning the ICT interactions upon tiny structural changes under pressure. Furthermore, the target luminophores demonstrate acid‐responsive photoluminescence spectra that can be recovered in either basic or ambient environments. These results suggest that D–A complexes are potential candidates for multistimuli‐responsive luminescence switching because their ICT profiles can be facilely tuned with tiny external stimuli.     

Wide‐Range Light‐Harvesting Donor–Acceptor Assemblies through Specific Intergelator Interactions via Self‐Assembly

We have synthesized two new low‐molecular‐mass organogelators based on tri‐p‐phenylene vinylene derivatives, one of which could be designated as the donor whereas the other one is an acceptor. These were prepared specifically to show the intergelator interactions at the molecular level by using donor–acceptor self‐assembly to achieve appropriate control over their macroscopic properties. Intermolecular hydrogen‐bonding, π‐stacking, and van der Waals interactions operate for both the individual components and the mixtures, leading to the formation of gels in the chosen organic solvents. Evidence for intergelator interactions was acquired from various spectroscopic, microscopic, thermal, and mechanical investigations. Due to the photochromic nature of these molecules, interesting photophysical properties, such as solvatochromism and J‐type aggregation, were clearly observed. An efficient energy transfer was exhibited by the mixture of donor–acceptor assemblies. An array of four chromophores was built up by inclusion of two known dyes (anthracene and rhodamine 6G) for the energy‐transfer studies. Interestingly, an energy‐transfer cascade was observed in the assembly of four chromophores in a particular order (anthracene‐donor‐acceptor‐rhodamine 6G), and if one of the components was removed from the assembly the energy transfer process was discontinued. This allowed the build up of a light‐harvesting process with a wide range. Excitation at one end produces an emission at the other end of the assembly.