A New Tetraphenylethylene‐Derived Fluorescent Probe for Nitroreductase Detection and Hypoxic‐Tumor‐Cell Imaging

The fluorescence detection of nitroreductase (NTR) and evaluation of the hypoxia status of tumor cells are vital, not only for clinical diagnoses and therapy, but also for biomedical research. Herein, we report the synthesis and application of a new fluorometric “turn‐on” probe for the detection of NTR ( TPE?NO₂ ) that takes advantage of the aggregation‐induced emission of tetraphenylethylene. TPE?NO₂ can detect NTR at concentrations as low as 5 ng mL^?1 in aqueous solution. The detection mechanism relied on the aggregation and deaggregation of tetraphenylethylene molecules. Moreover, this fluorescent probe can be used to monitor the hypoxia status of tumor cells through the detection of endogenous NTR.     

A New Simple Chromo‐fluorogenic Probe for NO2 Detection in Air

A new chromo‐fluorogenic probe, consisting of a biphenyl derivative containing both a silylbenzyl ether and a N,N‐dimethylamino group, for NO₂ detection in the gas phase has been developed. A clear colour change from colourless to yellow together with an emission quenching was observed when the probe reacted with NO₂. A limit of detection to the naked eye of about 0.1 ppm was determined and the system was successfully applied to the detection of NO₂ in realistic atmospheric conditions.     

Extraordinary NO2 Removal by the Metal–Organic Framework UiO‐66‐NH2

Here we discuss the removal of nitrogen dioxide, an important toxic industrial chemical and pollutant, from air using the MOF UiO‐66‐NH₂. The amine group is found to substantially aid in the removal, resulting in unprecedented removal capacities upwards of 1.4 g of NO₂ /g of MOF. Furthermore, whereas NO₂ typically generates substantial quantities of NO on sorbents, the amount generated by UiO‐66‐NH₂ is significantly reduced. Of particular significance is the formation of a diazonium ion on the aromatic ring of the MOF, and the potential reduction of NO₂ to molecular nitrogen.     

High‐Performance Amperometric Sensors Using Catalytic Platinum Nanoparticles‐Thionine‐Multiwalled Carbon Nanotubes Nanocomposite

Thionine (TH) adsorbed on multiwalled carbon nanotubes (MWCNTs) increases the load and dispersion of platinum nanoparticles (PtNPs) generated by chemical reduction of H₂PtCl₆ with NaBH₄. Under the optimum conditions, the PtNPs‐TH‐MWCNTs/Au electrode electrocatalyzed the reduction and oxidation of H₂O₂ with high sensitivity, and after glucose oxidase (GOx) adsorption it responded to glucose concentration with a sensitivity of 0.14 A M^?1 cm^?2. The cyclic voltammetric cathodic peak current for NO₂^? reduction on PtNPs‐TH‐MWCNTs/Au responded linearly to NO₂^? concentration from 0.5 to 150 µM, with a sensitivity of 5.52 A M^?1 cm^?2 and a detection limit of 0.2 µM.     

Time‐of‐flight mass spectrometry for time‐resolved measurements: Some developments and applications

In this paper, the time resolution for kinetic studies of reactions with mass spectrometric detection is characterized in detail, and it is shown how this allows faster kinetic processes to be determined. The time‐resolved technique used pulsed laser photolysis to initiate reaction and a time‐of‐flight mass spectrometer (TOFMS) to monitor progress, where the reactant gas was sampled by a sampling orifice and photoionized using pulsed, laser vacuum ultraviolet light before being analyzed by the TOFMS. Characterization of this setup has been carried out to identify the parameters that affect the time for “sampling,” which limits the fastest reactions that can be measured. A simple mathematical equation has been developed to correct for “sampling” delays (k_sampling～25, 000 s^?1), which extends the range of rate coefficients to be measured in a kinetic mass spectrometry reactor to k′ < 7000 s^?1. This method could be applied to any other kinetic mass spectrometry system where k_sampling can be measured; an important advantage since it allows the study of reactions over a wider range of conditions (e.g., larger concentrations of reagents/products can be used to minimize the contribution from wall losses). The system can produce reliable kinetic data whether monitoring reactant decay or product growth even when the reaction and sampling processes are occurring on a similar timescale (k′ < 7000 s^?1). Reproducible and reliable kinetic data have been obtained for the following reactions: SO + NO₂ → products (R1), ClSO + NO₂ → products (R2), where SO and ClSO were monitored under pseudo‐first‐order conditions, and HCO + O₂ → CO + HO₂ (R3), where CO was monitored by a [1+1] resonance enhanced ionization multiphoton ionization (REMPI) scheme with HCO reacting under pseudo–first‐order conditions. The limitations and potential developments of this setup are described. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 44: 532–545, 2012     

Diamondoid Nanostructures as sp3‐Carbon‐Based Gas Sensors

Diamondoids, sp³‐hybridized nanometer‐sized diamond‐like hydrocarbons (nanodiamonds), difunctionalized with hydroxy and primary phosphine oxide groups, enable the assembly of the first sp³‐C‐based chemical sensors by vapor deposition. Both pristine nanodiamonds and palladium nanolayered composites can be used to detect toxic NO₂ and NH₃ gases. This carbon‐based gas sensor technology allows reversible NO₂ detection down to 50 ppb and NH₃ detection at 25–100 ppm concentration with fast response and recovery processes at 100 °C. Reversible gas adsorption and detection is compatible with 50 % humidity conditions. Semiconducting p‐type sensing properties are achieved from devices based on primary phosphine–diamantanol, in which high specific area (ca. 140 m² g^?1) and channel nanoporosity derive from H‐bonding.     

Rapid separation of post‐blast explosive residues on glass electrophoresis microchips

This study describes the development of an analytical methodology based on the use of microchip electrophoresis (ME) devices integrated with capacitively coupled contactless conductivity detection (C⁴D) for the separation and detection of inorganic anions in post‐blast explosive residues. The best separation condition was achieved using a running buffer composed of 35 mmol/L lactic acid, 10 mmol/L histidine and 0.070 mmol/L cetyl(trimethyl ammonium) bromide. For C⁴D measurements, the highest sensitivity was obtained applying a 700 kHz sinusoidal wave with excitation voltage of 20 V_pp. The separation of Cl^?, NO₃^?, NO₂^?, SO₄^2?, ClO₄^? and ClO₃^? was performed within ca. 150 s with baseline resolution and efficiencies between 4.4 × 10⁴ and 1.7 × 10⁵ plates/m. The found limits of detection ranged between 2.5 and 9.5 μmol/L. Last, real samples of post‐blast explosive residues were analyzed on the ME‐C⁴D devices obtaining successfully the determination of Cl^?, NO₃^? and SO₄^2?. The achieved concentration values varied between 12.8–72.5 mg/L for Cl^?, 1.7–293.1 mg/L for NO₃^? and 1.3–201.3 mg/L for SO₄^2?. The data obtained using ME‐C⁴D devices were in good agreement with the concentrations found by ion chromatography. The approach reported herein has provided short analysis time, instrumental simplicity, good analytical performance and low cost. Furthermore, the ME‐C⁴D devices emerge as a powerful and portable analytical platform for on‐site analysis demonstrating to be a promising tool for the crime scene investigation.     

Electrochemistry of Nitrated N‐Confused Free‐Base Tetraaryl‐Porphyrins in Nonaqueous Media

Four nitrated N‐confused free‐base tetraarylporphyrins were synthesized and characterized by electrochemistry and spectroelectrochemistry in nonaqueous media. The examined compounds are represented as NO₂(Ar)₄NcpH₂, where NO₂(Ar)₄Ncp is the dianion of a tetraaryl N‐confused porphyrin with an inner carbon bound NO₂ group and Ar is a p‐CH₃OPh, p‐CH₃Ph, Ph or p‐ClPh substituent on each meso‐position of the macrocycle. UV/Vis spectra and NMR spectroscopy data indicate that the same form of the porphyrin exists in CH₂Cl₂ and DMF which is unlike the case of non‐NO₂ N‐confused porphyrins. The Soret band of NO₂(Ar)₄NcpH₂ exhibits a 30–36 nm red‐shift in CH₂Cl₂ and DMF as compared to the spectrum of the non‐NO₂ N‐confused porphyrins. The first two reductions and first oxidation of NO₂(Ar)₄NcpH₂ are reversible in CH₂Cl₂ containing 0.1 M TBAP. The measured HOMO–LUMO gap averages 1.65 V in CH₂Cl₂ and 1.53 V in DMF, with both values being similar to those of the non‐NO₂ substituted compounds. The nitro group on the inverted pyrrole is itself not reduced within the negative potential limit of CH₂Cl₂ or DMF, but its presence significantly affects both the UV/Vis spectra and redox potentials.     

Determination of hexavalent chromium in traditional Chinese medicines by high‐performance liquid chromatography with inductively coupled plasma mass spectrometry

An analytical method that combined high‐performance liquid chromatography with inductively coupled plasma mass spectrometry has been developed for the determination of hexavalent chromium in traditional Chinese medicines. Hexavalent chromium was extracted using the alkaline solution. The parameters such as the concentration of alkaline and the extraction temperature have been optimized to minimize the interconversion between trivalent chromium and hexavalent chromium. The extracted hexavalent chromium was separated on a weak anion exchange column in isocratic mode, followed by inductively coupled plasma mass spectrometry determination. To obtain a better chromatographic resolution and sensitivity, 75 mM NH₄NO₃ at pH 7 was selected as the mobile phase. The linearity of the proposed method was investigated in the range of 0.2–5.0 μg L^?1 (r² = 0.9999) for hexavalent chromium. The limits of detection and quantitation are 0.1 and 0.3 μg L^?1, respectively. The developed method was successfully applied to the determination of hexavalent chromium in Chloriti lapis and Lumbricus with satisfactory recoveries of 95.8–112.8%.     

Nanofibrous polyaniline thin film prepared by plasma‐induced polymerization technique for detection of NO2 gas

A nanofibrous polyaniline (PANI) thin film was fabricated using plasma‐induced polymerization method and explored its application in the fabrication of NO₂ gas sensor. The effects of substrate position, pressure, and the number of plasma pulses on the PANI film growth rate were monitored and an optimum condition for the PANI thin film preparation was established. The resulting PANI film was characterized with UV–visible spectrophotometer, FTIR, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The PANI thin film possessed nanofibers with a diameter ranging from 15 to 20 nm. The NO₂ gas sensing behavior was studied by measuring the change in electrical conductivity of PANI film with respect to NO₂ gas concentration and exposure time. The optimized sensor exhibited a sensitivity factor of 206 with a response time of 23 sec. The NO₂ gas sensor using nanofibrous PANI thin film as sensing probe showed a linear current response to the NO₂ gas concentration in the range of 10–100 ppm. Copyright © 2009 John Wiley & Sons, Ltd.     

A Flame‐Reaction Method for the Large‐Scale Synthesis of High‐Performance SmxCoy Nanomagnets

We report a flame‐reaction method to synthesize high‐performance Sm_xCo_y (x=1, y=5; x=2, y=17) particles on a multigram scale. This flame reaction allows the controlled decomposition of Sm(NO₃)₃ and Co(NO₃)₂ to 320 nm SmCo‐O (SmCoO₃ + Co₃O₄) particles. A 5.8 g sample of SmCo_3.8‐O particles was coated with CaO and then reduced at 900 °C by Ca to give 4.2 g of 260 nm SmCo₅ particles. The SmCo₅ particles are strongly ferromagnetic and the aligned particles in epoxy resin exhibit a large room‐temperature coercivity (H_c) of 41.8 kOe and giant (BH)_max (maximum magnetic energy product) of 19.6 MGOe, the highest value ever reported for SmCo₅ made by chemical methods. This synthesis can be extended to synthesize Sm₂Co₁₇ particles, providing a general approach to scaling up the synthesis of high‐performance Sm_xCo_y nanomagnets for permanent magnet applications.     

The Fabrication and Characterization of a Bismuth Nanoparticle Modified Boron Doped Diamond Electrode and Its Application to the Simultaneous Determination of Cadmium(II) And Lead(II)

We report the simultaneous electroanalytical determination of Pb²⁺ and Cd²⁺ by square‐wave anodic stripping voltammetry (SWASV) using a bismuth nanoparticle modified boron doped diamond (Bi‐BDD) electrode. Bi deposition was performed in situ with the analytes, from a solution of 0.1 mM Bi(NO₃)₃ in 0.1 M HClO₄ (pH 1.2), and gave detection limits of 1.9 μg L^?1 and 2.3 μg L^?1 for Pb(II) and Cd(II) respectively. Pb²⁺ and Cd²⁺ could not be detected simultaneously at a bare BDD electrode, whilst on a bulk Bi macro electrode (BiBE) the limits of detection for the simultaneous determination of Pb²⁺ and Cd²⁺ were ca. ten times higher.     

Thermal Stability of n‐Acyl Peroxynitrates

Peroxynitrates (RO₂NO₂), in particular acyl peroxynitrates (R = R′C(O) with R′ = alkyl), are prominent constituents of polluted air. In this work, a systematic study on the thermal decomposition rate constants of the first five members of the series of homologous R′C(O)O₂NO₂ with R′ = CH₃ ( =PAN), C₂H₅, n‐C₃H₇, n‐C₄H₉, and n‐C₅H₁₁ is undertaken to verify the conclusions from previous laboratory data (Grosjean et al., Environ. Sci. Technol. 1994, 28, 1099–1105; Grosjean et al., Environ. Sci. Technol. 1996, 30, 1038–1047; Bossmeyer et al., Geophys. Res. Lett. 2006, 33, L18810) that the longer chain peroxynitrates may be considerably more stable than PAN. Experiments are performed in a temperature‐controlled, evacuable 200 L‐photoreactor made from quartz. n‐Acyl peroxynitrates are generated by stationary photolysis of mixtures of molecular bromine, O₂, NO₂, and the corresponding parent aldehydes, highly diluted in N₂. Thermal decomposition of R′C(O)O₂NO₂ is initiated by the addition of an excess of NO. First‐order decomposition rate constants k₁ of the reactions R′C(O)O₂NO₂ (+M) → R′C(O)O₂ + NO₂ (+M) are derived at 298 K and a total pressure of 1 bar from the measured loss rates of R′C(O)O₂NO₂, correcting for wall loss of R′C(O)O₂NO₂ and several percentages of reformation of R′C(O)O₂NO₂ by the reaction of R′C(O)O₂ radicals with NO₂. With increasing chain length of R′, k₁(298 K) slightly decreases from 4.4 × 10^?4 s^?1 (R′ = CH₃) to 3.7 × 10^?4 s^?1 (R′ = C₂H₅), leveling off at (3.4 ± 0.1) × 10^?4 s^?1 for R′ = n‐C₃H₇, n‐C₄H₉, and n‐C₅H₁₁. Temperature dependencies of k₁ were measured for CH₃C(O)O₂NO₂ and n‐C₅H₁₁C(O)O₂NO₂ in the temperature range 289–308 K, resulting in the same activation energy within the statistical error limits (2σ) of 0.9 and 1.5 kJ mol^?1, respectively. A few experiments on n‐C₆H₁₃C(O)O₂NO₂, n‐C₇H₁₅C(O)O₂NO₂, and n‐C₈H₁₇C(O)O₂NO₂ were also performed, but the results were considered to be unreliable due to strong wall loss of the peroxynitrate and possible complications caused by radical‐sinitiated side reactions.     

H2S Sensors: Fumarate‐Based fcu‐MOF Thin Film Grown on a Capacitive Interdigitated Electrode

Herein we report the fabrication of an advanced sensor for the detection of hydrogen sulfide (H₂S) at room temperature, using thin films of rare‐earth metal (RE)‐based metal–organic framework (MOF) with underlying fcu topology. This unique MOF‐based sensor is made via the in situ growth of fumarate‐based fcu ‐MOF (fum‐ fcu ‐MOF) thin film on a capacitive interdigitated electrode. The sensor showed a remarkable detection sensitivity for H₂S at concentrations down to 100 ppb, with the lower detection limit around 5 ppb. The fum‐ fcu ‐MOF sensor exhibits a highly desirable detection selectivity towards H₂S vs. CH₄, NO₂, H₂, and C₇H₈ as well as an outstanding H₂S sensing stability as compared to other reported MOFs.     

The NiII,HgII and CuII complexes of 12‐membered‐ring mixed‐donor macrocycles

The structures of di­aqua(1,7‐dioxa‐4‐thia‐10‐aza­cyclo­do­decane)­nickel dinitrate, [Ni(C₈H₁₇NO₂S)(H₂O)₂](NO₃)₂, (I), bis­(nitrato‐O,O′)(1,4,7‐trioxa‐10‐aza­cyclo­do­decane)­mercury, [Hg(NO₃)₂(C₈H₁₇NO₃)], (II), and aqua­(nitrato‐O)(1‐oxa‐4,7,10‐tri­aza­cyclo­do­decane)copper nitrate, [Cu(NO₃)(C₈H₁₉N₃O)(H₂O)]NO₃, (III), reveal each macrocycle binding in a tetradentate manner. The conformations of the ligands in (I) and (III) are the same and distinct from that identified for (II). These differences are in agreement with molecular‐mechanics predictions of ligand conformation as a function of metal‐ion size.     

Aggregation‐Induced Emission Active Probe for Light‐Up Detection of Anionic Surfactants and Wash‐Free Bacterial Imaging

Anionic surfactants are widely used in daily life and industries, but their residues can cause serious damage to the environment. The current detection methods for anionic surfactants suffer from various limitations and a new detection strategy is highly desirable. Based on 2‐(2‐hydroxyphenyl)benzothiazole fluorogen with aggregation‐induced emission characteristics, we have developed a fluorescent probe HBT‐C₁₈ for selective and sensitive detection of anionic surfactants. By in situ formation of catanionic aggregates or micelles with anionic surfactants, the emission intensity of the HBT‐C₁₈ probe can increase with increasing keto/enol emission ratio through restriction of intramolecular motion and excited‐state intramolecular proton‐transfer mechanisms. The probe can also be used for wash‐free imaging of bacteria enveloped by a negatively charged outer membrane. The results of this study provide a new strategy for sensitive detection of anionic surfactants and wash‐free bacterial imaging.     

“Oxidative etching-aggregation” of silver nanoparticles by melamine and electron acceptors: An innovative route toward ultrasensitive and versatile functional colorimetric sensors

An innovative and versatile functional colorimetric sensor for melamine (MA) and H₂O₂ was developed with simplicity, excellent selectivity and ultrasensitivity. The detection mechanism was based on the “oxidative etching-aggregation” of silver nanoparticles (AgNPs) by the cooperation effect of MA and electron acceptors such as H₂O₂, ozone or Fe(NO₃)₃. The detection limits of this method for MA could reach as low as 0.08 nM, 0.16 nM and 3 nM when H₂O₂, ozone or Fe(NO₃)₃ was used as an electron acceptor, respectively. When using H₂O₂ as a typical electron acceptor, the method enabled the detection of H₂O₂ with a detection limit of 0.2 nM. This proposed method offered a new way to design MA and H₂O₂ sensors and might be easily extended to detect other nucleophilic reagents and electron acceptors based on colorimetric sensors.     

A 3,7‐Dihydroxyphenoxazine‐based Fluorescent Probe for Selective Detection of Intracellular Hydrogen Peroxide

A novel N‐borylbenzyloxycarbonyl‐3,7‐dihydroxyphenoxazine fluorescent probe (NBCD) for detecting H₂O₂ in living cells is described. The probe could achieve high selectivity for detecting H₂O₂ over other biological reactive oxygen species (ROS). In addition, upon addition of H₂O₂, NBCD exhibited color change from colorless to pink, which makes it a “naked‐eye” probe for H₂O₂ detection. NBCD could not only be used to detect enzymatically generated H₂O₂ but also to detect H₂O₂ in living systems by using fluorescence spectroscopy, with a detection limit of 2 μm . Importantly, NBCD enabled the visualization of epidermal growth factor (EGF)‐stimulated H₂O₂ generation inside the cells.     

Water‐Free Rare‐Earth‐Metal Ionic Liquids/Ionic Liquid Crystals Based on Hexanitratolanthanate(III) Anion

The hexanitratolanthanate anion (La(NO₃)₆^3?) is an interesting symmetric anion suitable to construct the component of water‐free rare‐earth‐metal ionic liquids. The syntheses and structural characterization of eleven lanthanum nitrate complexes, [C_nmim]₃[La(NO₃)₆] (n=1, 2, 4, 6, 8, 12, 14, 16, 18), including 1,3‐dimethylimidazolium hexanitratolanthanate ([C₁mim]₃[La(NO₃)₆], 1 ), 1‐ethyl‐3‐methylimidazolium hexanitratolanthanate ([C₂mim]₃[La(NO₃)₆], 2 ), 1‐butyl‐3‐methylimidazolium hexanitratolanthanate ([C₄mim]₃[La(NO₃)₆], 3 ), 1‐isobutyl‐3‐methylimidazolium hexanetratolanthanate ([isoC₄mim]₃[La(NO₃)₆], 4 ), 1‐methyl‐3‐(3′‐methylbutyl)imidazolium hexanitratolanthanate ([MC₄mim]₃[La(NO₃)₆], 5 ), 1‐hexyl‐3‐methylimidazolium hexanitratolanthanate ([C₆mim]₃[La(NO₃)₆], 6 ), 1‐methyl‐3‐octylimidazolium hexanitratolanthanate ([C₈mim]₃[La(NO₃)₆], 7 ), 1‐dodecyl‐3‐methylimidazolium hexanitratolanthanate ([C₁₂mim]₃[La(NO₃)₆], 8 ), 1‐methyl‐3‐tetradecylimidazolium hexanitratolanthanate ([C₁₄mim]₃[La‐(NO₃)₆], 9 ), 1‐hexadecyl‐3‐methylimid‐azolium hexanitratolanthanum ([C₁₆dmim]₃[La(NO₃)₆], 10 ), and 1‐methyl‐3‐octadecylimidazolium hexanitratolanthanate ([C₁₈mim]₃[La(NO₃)₆], 11 ) are reported. All new compounds were characterized by ¹H and ¹³C NMR, and IR spectroscopy as well as elemental analysis. The crystal structure of compound 1 was determined by using single‐crystal X‐ray diffraction, giving the following crystallographic information: monoclinic; P2₁/c; a=15.3170 (3), b=14.2340 (2), c=13.8954(2) Å; β=94.3453(15)°, V=3020.80(9) ų, Z=4, ρ=1.764 g cm^?3. The coordination polyhedron around the lanthanum ion is rationalized by six nitrate anions with twelve oxygen atoms. No hydrogen‐bonding network or water molecule was found in 1 . The thermodynamic stability of the new complexes was investigated by using thermogravimetric analysis (TGA). The water‐free hexanitratolanthanate ionic liquids are thermal and moisture stable. Four complexes, namely complexes 8 – 11 , were found to be ionic liquid crystals by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). They all present smectic A liquid‐crystalline phase.     

Metal‐Sensitive Hydrothermal Synthesis and Structural Characterization of a Mixed‐Metal and Porous Coordination Polymer Containing 2,3‐Pyridinedicarboxylate

The hydrothermal reaction of 2,3‐pyridinedicarboxylic acid (2,3‐H₂pda) with a mixture of Cd(NO₃)₂ and Ni(NO₃)₂ afforded a coordination polymer, [CdNi(2,3‐pda)₂(H₂O)₃]_∞ ( 1 ); in contrast, that with a mixture of Cd(NO₃)₂ and Zn(NO₃)₂ surprisingly produced a discrete molecule, trans‐[Cd(3‐pa)₂(H₂O)₄] ( 2 ) (3‐pa^? = 3‐pyridinecarboxylate). Since a direct reaction between a single metal salt, Cd(NO₃)₂ or Zn(NO₃)₂, and 3‐pyridinecarboxylic acid (3‐Hpa) under similar hydrothermal conditions yielded different coordination polymers containing 3‐pa^?, it appears that the apparently thermal decarboxylation from ligated 2,3‐pda^2? to 3‐pa^? occurs after complexation of both metal cations, Cd(II) and Zn(II). A new coordination mode, formed for 2,3‐pda^2? in structure 1 , appears to help formation of microporous channels by piling up the observed 2D hydrogen‐bonded heteropolynuclear layers. Each channel apparently consists of two interpenetrating 6³ Cd(II) and Ni(II) nets.