Direct electrochemistry of catalase on glassy carbon electrodes.

Catalase was investigated as a possible catalyst of the electrochemical reduction of oxygen on glassy carbon electrodes. The presence of catalase dissolved in solution only provoked a moderate current increase, which was fully explained by the catalase-catalysed disproportionation of hydrogen peroxide (Scheme I). When catalase was adsorbed from dimethylsulfoxide on the surface of electrodes that did not undergo any electrochemical pre-treatment (EP), catalase efficiently catalysed oxygen reduction via direct electron transfer from the electrode (Scheme II). The results are discussed with respect to the electrode surface properties and the enzyme structure.     

Direct Electron Transfer and Bioelectrocatalysis by a Hexameric,Heme Protein at Nanostructured Electrodes

A nanohybrid consisting of poly(3‐aminobenzenesulfonic acid‐co‐aniline) and multiwalled carbon nanotubes [MWCNT‐P(ABS‐A)]) on a gold electrode was used to immobilize the hexameric tyrosine‐coordinated heme protein (HTHP). The enzyme showed direct electron transfer between the heme group of the protein and the nanostructured surface. Desorption of the noncovalently bound heme from the protein could be excluded by control measurements with adsorbed hemin on aminohexanthiol‐modified electrodes. The nanostructuring and the optimised charge characteristics resulted in a higher protein coverage as compared with MUA/MU modified electrodes. The adsorbed enzyme shows catalytic activity for the cathodic H₂O₂ reduction and oxidation of NADH.     

Catalytic Activity of Anisotropic Gold Nanoplates towards Oxygen Reduction

Glassy carbon electrode (GCE) coated with anisotropic gold nanoplates (aAuNPs) was used for the study of oxygen reduction reaction (ORR) in 0.5 M sulfuric acid instead of bulk gold electrodes. The electrode cleaning/activation procedure lead to the removal of any charged and uncharged residues on the gold nanoplates, leaving the nanostructured surface highly active towards oxygen reduction. The advantages: much lower overpotential and larger current densities of oxygen reduction are ascribed to the unique nanostructures present on the carbon electrode surface‐the gold nanoplates. They are rich in edges providing a large population of Au (100) sites with unsaturated coordination exposed to the solution, and catalytically active. Measurements performed using a rotating disc electrode, modified with the gold nanoplates, confirmed that ORR proceeds via two separate steps: oxygen is reduced to hydrogen peroxide, and the peroxide is further reduced in a two‐electron reduction to water.     

Electrocatalytic Reduction of Oxygen at Multi‐Walled Carbon Nanotubes and Cobalt Porphyrin Modified Glassy Carbon Electrode

The multi‐walled carbon nanotubes (MWNTs) modified glassy carbon electrode exhibited electrocatalytic activity to the reduction of oxygen in 0.1 M HAc‐NaAc (pH 3.8) buffer solution. Further modification with cobalt porphyrin film on the MWNTs by adsorption, the resulted modified electrode showed more efficient catalytic activity to O₂ reduction. The reduction peak potential of O₂ is shifted much more positively to 0.12 V (vs. Ag/AgCl), and the peak current is increased greatly. Cyclic voltammetry (CV), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), were used to characterize the material and the modified film on electrode surface. Electrochemical experiments gave the total number of electron transfer for oxygen reduction as about 3, which indicated a co‐exist process of 2 electrons and 4 electrons for reduction of oxygen at this modified electrode. Meanwhile, the catalytic activities of the multilayer film (MWNTs/CoTMPyP)_n prepared by layer‐by‐layer method were investigated, and the results showed that the peak current of O₂ reduction increased and the peak potential shifted to a positive direction with the increase of layer numbers.     

Direct Electrochemistry of Multi‐Copper Oxidases at Carbon Nanotubes Noncovalently Functionalized with Cellulose Derivatives

This study describes the direct electron transfer of multi‐copper oxidases, i.e., laccase (from Trametes versicolor) and bilirubin oxidase (BOD, from Myrothecium verrucaria) at multiwalled carbon nanotubes (MWNTs) noncovalently functionalized with biopolymers of cellulose derivatives, i.e., hydroxyethyl cellulose (HEC), methyl cellulose (MC), and carboxymethyl cellulose (CMC). The functionalization of the MWNTs with the cellulose derivatives is found to substantially solubilize the MWNTs into aqueous media and to avoid their aggregation on electrode surface. Under anaerobic conditions, the redox properties of laccase and BOD are difficult to be defined with cyclic voltammetry at either laccase/MWNT‐modified or BOD/MWNT‐modified electrodes. The direct electron transfer properties of laccase and BOD are thus studied in terms of the bioelectrocatalytic activities of the laccase/MWNT‐modified and BOD/MWNT‐modified electrodes toward the reduction of oxygen and found to be facilitated at the functionalized MWNTs. The possible application of the laccase‐catalyzed O₂ reduction at the laccase/MWNT‐modified electrode is illustrated by constructing a CNT‐based ascorbate/O₂ biofuel cell with the MWNT‐modified electrode as the anode for the oxidation of ascorbate biofuel.     

Pyrenyl Carbon Nanotubes for Covalent Bilirubin Oxidase Biocathode Design: Should the Nanotubes be Carboxylated?

Understanding the characteristics of nanomaterials in the context of electrode designs for bio‐electrocatalysis is an emerging research direction. Applications for fuel cells, batteries, and biosensors are directly benefited. The objective of this study is to understand the influence of unfunctionalized multiwalled carbon nanotubes (MWNT) in comparison to carboxylated nanotubes (MWNT?COOH) for pi‐pi stacking with 1‐pyrenebutyric acid (Py) and covalent immobilization of bilirubin oxidase (BOD) enzyme toward the resulting oxygen reduction currents. We designed pyrolytic graphite‐edge electrodes modified with MWNT/Py, MWNT?COOH/Py, or only MWNT?COOH for carbodiimide activation and BOD immobilization. The relative increase in surface ?COOH groups as we move from MWNT to MWNT/Py to MWNT?COOH/Py modification is voltammetrically estimated. Although the MWNT?COOH/Py displayed the highest relative amount of surface ?COOH groups, the oxygen reduction current was the largest for the BOD‐immobilized MWNT/Py electrode than others. Results indicate that unfunctionalized MWNT is the optimal choice for pi‐pi stacking with pyrene linkers and covalent BOD immobilization as biocathode for energy devices. Favorable hydrophobic MWNT surface to interact more closely with the electron‐receiving T1 Cu site of BOD, as opposed to the relatively polar and more defective MWNT?COOH material due to functionalization, is suggested to be one of the underlying factors for the observed electrocatalytic trend.     

Pulsed Deposited Manganese and Vanadium Oxide Film Modified with Carbon Nanotube and Gold Nanoparticle: Chitosan and Ionic Liquid‐based Biosensor

Present study describes the synthesis of mixed oxide films of manganese and vanadium by electrochemical pulsed deposition technique on a glassy carbon electrode (GCE) modified with multiwall carbon nanotubes (MWCNT). The film was further decorated with gold nanoparticles to enhance the reduction signal of dissolved oxygen in pH 5.17 acetate buffer solution. All of the electrochemical synthesized modified electrodes have been characterized with Scanning electron microscopy(SEM), High‐resolution transmission electron microscopy (HRTEM), X‐Ray photoelectron spectroscopy (XPS), X‐Ray diffraction (XRD) techniques. The electrode obtained (AuNPs/MnOx?VOx/CNT/GCE) was utilized as a platform for glucose biosensor where the glucose oxidase enzyme was immobilized on the composite film with the aid of chitosan and an ionic liquid. The electrochemical performance of the biosensor was investigated by cyclic voltammetry and the relative parameters have been optimized by amperometric measurements in pH 5.17 acetate buffer solution. The developed biosensor exhibited a linear range for glucose between 0.1–1.0 mM and the limit of detection was calculated as 0.02 mM.     

Exploration of Stable Sonoelectrocatalysis for the Electrochemical Reduction of Oxygen

A series of modified electrodes were prepared both via solvent evaporation and electrochemical cycling of azobenzene and derivatives and various quinones and assessed for their suitability as oxygen reduction electrocatalysts and sonoelectrocatalysts. Glassy carbon electrodes were modified via solvent evaporation with 1,2‐dihydroxyanthraquinone and 1,2‐diazonium‐9,10‐anthraquinone while edge plane and basal plane pyrolytic graphite electrodes were modified by the same procedure with 9,10‐phenanthraquinone. The stability of the attached moiety was accessed in each case under ultrasound. For comparison the same electrode substrates were modified with 9,10‐phenanthraquinone by electrochemical cycling and also exposed to ultrasound. The observed results suggest the use of the glassy carbon electrodes modified with azobenzene and derivatives via solvent evaporation as the optimal carbon based sonoelectrocatalysts for oxygen reduction in term of stability under insonation and high catalytic rate.     

Electrochemical reduction of oxygen on double-walled carbon nanotube modified glassy carbon electrodes in acid and alkaline solutions

The oxygen reduction reaction has been investigated on double-walled carbon nanotube (DWCNT) modified glassy carbon (GC) electrodes in acid and alkaline media using the rotating disk electrode (RDE) method. The surface morphology and composition of DWCNT samples was examined by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Aqueous suspensions of DWCNTs were prepared using Nafion and non-ionic surfactant Triton X-100 as dispersing agents. The RDE results indicated that the DWCNT modified GC electrodes are active catalysts for oxygen reduction in alkaline solution. In acid media DWCNT/GC electrodes possess poor electrocatalytic properties for O₂ reduction which indicates lack of metal catalyst impurities in the DWCNT material studied. The oxygen reduction behaviour of DWCNTs was similar to that of multi-walled carbon nanotubes (MWCNTs) observed in our previous studies.     

Oxygen electroreduction on anthraquinone-modified nickel electrodes in alkaline solution

The electrochemical reduction of oxygen has been studied on anthraquinone (AQ) modified nickel electrodes in 0.1 M KOH solution using the rotating disk electrode (RDE) technique. Modification of the Ni electrode surface with AQ by electrochemical reduction of the corresponding diazonium salt was carried out in two different media (in acetonitrile and in aqueous acidic solution). The AQ-modified Ni electrodes showed a good electrocatalytic activity for O₂ reduction. The RDE data indicate that the reduction of oxygen on Ni/AQ electrodes proceeds by a two-electron pathway in alkaline solution. The O₂ reduction results obtained for Ni/AQ electrodes are compared with those of AQ-modified glassy carbon electrodes.     

Electrocatalysis of oxygen reduction on multi-walled carbon nanotube supported copper and manganese phthalocyanines in alkaline media

Manganese phthalocyanine (MnPc) and copper phthalocyanine (CuPc)-modified electrodes were prepared using multi-walled carbon nanotubes (MWCNTs) as a support material. The catalyst materials were heat treated at four different temperatures to investigate the effect of pyrolysis on the oxygen reduction reaction (ORR) activity of these electrocatalysts. The MWCNT to metal phthalocyanine ratio was varied. Scanning electron microscopy (SEM) was employed to visualise the surface morphology of the electrodes and the x-ray photoelectron spectroscopic (XPS) study was carried out to analyse the surface composition of the most active catalyst materials. The ORR was studied in 0.1 M KOH solution employing the rotating disk electrode (RDE) method. Glassy carbon (GC) electrodes were modified with carbon nanotube-supported metal phthalocyanine catalysts using Tokuyama AS-4 ionomer. The RDE results revealed that the highest electrocatalytic activity for ORR was achieved upon heat treatment at 800 °C. CuPc-derived catalyst demonstrated lower catalytic activity as compared to the MnPc-derived counterpart, which is in good agreement with previous literature, whereas the activity of MnPc-based catalyst was higher than that reported earlier.     

生物功能电极I: GOD修饰电极的电化学活性

以二环己基碳化二亚胺为活化剂将葡萄糖氧化酶(GOD)共价键接在玻碳电极上, 伏安实验观察到酶与电极基体的直接电子传递, 有观电子传递速度常数约为1s^-^1, 过程归因于全酶中辅基FAD的氧化还原转变。Ag^+离子的存在强烈地阻碍酶辅基的还原, 这与该离子抑制酶活性的机理可能有联系。Ag^+的抑制作用可由EDTA处理或电化学处理而解除, GOD电极对氧和苯醌的电还原有催化作用。测定了苯醌同还原态GOD的化学反应速度常数, 并讨论用苯醌代替氧作为生物电催化中的电子传递体的优点。     

Electrochemical Preparation of Brilliant‐Blue‐Modified Poly(diallyldimethylammonium Chloride) and Nafion‐Coated Glassy Carbon Electrodes and Their Electrocatalytic Behavior Towards Oxygen and L‐Cysteine

Brilliant blue FCF‐modified glassy carbon electrodes have been prepared by cycling the Nafion (or poly(diallyldimethylammonium chloride) (PDDAC)) coated electrodes repeatedly 15 cycles in brilliant blue FCF (BB FCF) dye solution. The BB FCF molecules are incorporated into Nafion coating by cycling the film‐covered electrode between +0.3 to 1.2 V (vs. Ag/AgCl) in pH 1.5 BB FCF solution while PDDAC‐coated electrode cycled between 0 to ?1.0 V (vs. Ag/AgCl) in pH 6.5 BB FCF solution to immobilize the dye. Electrostatic interaction between dye molecule and PDDAC was predominant in PDDAC coating whereas immobilization of dye in Nafion film attributed to the combined effect of electrostatic and hydrophobic interactions. The voltammetric features of BB FCF‐modified electrodes resemble that of surface‐confined redox couples. The peak potentials of BB FCF‐incorporated PDDAC‐coated electrode were shifted to more positive potential region with decreasing pH of contacting solution. BB FCF‐modified electrodes showed electrocatalytic activity towards reduction of oxygen and oxidation of L ‐cysteine with significant decease of overvoltage compared to unmodified electrode. The BB FCF‐modified Nafion‐coated electrode was tested for its analytical applications toward determination of L ‐cysteine. The linear range of calibration plot at BB FCF‐modified Nafion‐coated electrode is 10 to 100 μM, which coincides with L ‐cysteine levels in biological fluids. Sensitivity and detection limit of the electrode are 111 nA μM^?1 and 0.5 μM, respectively.     

Oxygen Evolution Reaction on Nanoporous Gold Modified with Ir and Pt: Synergistic Electrocatalysis between Structure and Composition

Active oxygen evolution reaction electrocatalysts for water splitting have received great attention because of their importance in the utilization of renewable energy sources. Here, the electrochemical oxygen evolution reaction activities of a nanoporous gold (NPG)‐based electrode in acidic media are investigated. The dependence of the oxygen evolution reaction activity on the NPG surface area shows that the large electrochemical surface areas of the NPG are effectively utilized to enhance electrocatalytic activity. The NPG surfaces are modified with Pt using atomic layer electrodeposition methods, and the resulting NPG@Pt exhibited enhanced electrocatalytic activities compared to those of the NPG and flat Pt electrodes. Ir‐modified NPG (NPG@Ir) electrodes are prepared by spontaneous exchange of Ir on NPG surfaces and exhibit enhanced electrocatalytic activity compared to that of flat Ir surfaces. The modification of NPG@Pt with Ir results in NPG@Pt/Ir electrodes, and their electrocatalytic activities exceed those of NPG@Ir. The enhanced oxygen evolution reaction activity on NPG@Pt/Ir over that on NPG@Ir surfaces is examined by X‐ray photoelectron spectroscopy. The oxygen evolution reaction activity on NPG@Pt/Ir surfaces demonstrates synergistic electrocatalysis between the nanoporous surface structure and active electrocatalytic components.     

Electrocatalytic Dioxygen Reduction at Glassy Carbon Electrode Modified with Polyaniline Grafted Multiwall Carbon Nanotube Film

The work details the electrocatalysis of oxygen reduction reaction (ORR) in 0.5 M H₂SO₄ medium on a modified electrode containing a film of polyaniline (PANI) grafted multi‐wall carbon nanotube (MWNT) over the surface of glassy carbon electrode. We have fabricated a novel modified electrode in which conducting polymer is present as connected unit to MWNT. The GC/PANI‐g‐MWNT modified electrode (ME) is fabricated by electrochemical polymerization of a mixture of amine functionalized MWNT and aniline with GC as working electrode. Cyclic voltammetry and amperometry are used to demonstrate the electrocatalytic activity of the GC/PANI‐g‐MWNT‐ME. The GC/PANI‐g‐MWNT‐ME exhibits remarkable electrocatalytic activity for ORR. A more positive onset potential and higher catalytic current for ORR are striking features of GC/PANI‐g‐MWNT‐ME. Rapid and high sensitivity of GC/PANI‐g‐MWNT‐ME to ORR are evident from the higher rate constant (7.92×10² M^?1 s^?1) value for the reduction process. Double potential chronoamperometry and rotating disk and rotating ring‐disk electrode (RRDE) experiments are employed to investigate the kinetic parameters of ORR at this electrode. Results from RDE and RRDE voltammetry demonstrate the involvement of two electron transfer in oxygen reduction to form hydrogen peroxide in acidic media.     

Reagentless Glucose Biosensor Based on the Direct Electrochemistry of Glucose Oxidase on Carbon Nanotube‐Modified Electrodes

The direct electrochemistry of glucose oxidase (GOD) was revealed at a carbon nanotube (CNT)‐modified glassy carbon electrode, where the enzyme was immobilized with a chitosan film containing gold nanoparticles. The immobilized GOD displays a pair of redox peaks in pH 7.4 phosphate buffer solutions (PBS) with the formal potential of about ?455 mV (vs. Ag/AgCl) and shows a surface‐controlled electrode process. Bioactivity remains good, along with effective catalysis of the reduction of oxygen. In the presence of dissolved oxygen, the reduction peak current decreased gradually with the addition of glucose, which could be used for reagentless detection of glucose with a linear range from 0.04 to 1.0 mM. The proposed glucose biosensor exhibited high sensitivity, good stability and reproducibility, and was also insensitive to common interferences such as ascorbic and uric acid. The excellent performance of the reagentless biosensor is attributed to the effective enhancement of electron transfer between enzyme and electrode surface by CNTs, and the biocompatible environment that the chitosan film containing gold nanoparticles provides for immobilized GOD.     

A Simple Route of Modifying Copper Electrodes for the Determination of Methanol and Ethylene Glycol

Copper foil electrodes were modified in a stirred NaOH solution at room temperature. Measurements with scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and X‐ray photoelectron spectroscopy confirmed the simultaneous structural transformation and chemical modification of the foil surface. The as‐prepared electrodes produced isolated anodic peaks in the cyclic voltammogram of methanol or ethylene glycol in alkaline solution. The highest anodic peak current was achieved at the electrode that was modified for 5 hours. Amperometric study illustrates that the modified electrode can detect lower than 100 µM methanol with a sensitivity of 15.8 µA/mM or 10 µM ethylene glycol with a sensitivity of 193 µA/mM. Importantly, the method is robust and the prepared electrodes show great reproducibility.     

Wiring Laccase on Covalently Modified Graphene: Carbon Nanotube Assemblies for the Direct Bio‐electrocatalytic Reduction of Oxygen

Reduced graphene oxide (RGO) was covalently functionalized by the in situ generation and reduction of anthraquinone diazonium salt. Deposition on multi‐wall carbon nanotube (MWCNT) electrodes prevents the aggregation of RGO nanosheets and allows the stable deposition of modified graphene, accompanied with excellent electron transfer properties. Laccases were immobilized on the nanostructured electrode by the interaction between the anthraquinone moiety and the laccase hydrophobic pocket located near the T1 copper center. The MWCNT/f‐RGO electrode exhibits efficient bioelectrocatalytic oxygen reduction, with current densities of up to 0.9 mA cm^?2.     

Detection of Hydrogen Peroxide and Glucose Based on Immobilized C60‐Catalase Enzyme

The interaction between fullerene C60 and catalase enzyme was studied with a fullerene C60‐coated piezoelectric (PZ) quartz crystal sensor. The partially irreversible response of the C60‐coated PZ crystal sensor for catalase was observed by the desorption study, which implied that C60 could chemically react with catalase. Thus, immobilized fullerene C60‐catalase enzyme was synthesized and applied in determining hydrogen peroxide in aqueous solutions. An oxygen electrode detector with the immobilized C60‐catalase was also employed to detect oxygen, a product of the hydrolysis of hydrogen peroxide which was catalyzed by the C60‐catalase. The oxygen electrode/C60‐catalase detection system exhibited linear responses to the concentration of hydrogen peroxide and amount of immobilized C60‐catalase enzyme that was used. The effects of pH and temperature on the activity of the immobilized C60‐catalase enzyme were also investigated. Optimum pH at 7.0 and optimum temperature at 25 °C for activity of the insoluble immobilized C60‐catalase enzyme were found. The immobilized C60‐catalase enzyme could be reused with good repeatability of the activity. The lifetime of the immobilized C60‐catalase enzyme was long enough with an activity of 93% after 95 days. The immobilized C60‐catalase enzyme was also applied in determining glucose which was oxidized with glucose oxidase resulting in producing hydrogen peroxide, followed by detecting hydrogen peroxide with the oxygen electrode/C60‐catalase detection system.     

高分子聚合物-多壁碳纳米管复合物固定漆酶及其在玻碳电极上的直接电子迁移

采用不同结构的高分子聚合物与纯化的多壁碳纳米管(MWCNTs)共混的方法,制备得到聚合物非共价功能化多壁碳管复合物,测定了这些载体对漆酶(lac)的担载量、固定漆酶的比活力及稳定性.以固定漆酶的复合物修饰玻碳(GC)电极后,采用循环伏安法研究这些电极在无氧磷酸盐缓冲液(PBS)中的直接电化学行为及催化氧还原活力,粗略地测定了固定漆酶与电极间电子转移的速率常数.实验结果表明,当聚合物中含亲漆酶基团或能与漆酶活性中心发生相互作用的官能团时利于直接电子转移,而且复合物固定漆酶保持了游离漆酶的天然构象.这些电极中,lac/NIPAM-co-BPCP-M WCNTs/GC(NIPAM-co-BPCP:N-烯丙基-1-苯甲酰基-3-苯基-4,5-2H-4-甲酰胺基吡唑-co-N-异丙基丙烯酰胺)在无氧PBS中发生直接电子转移的式电位(605mV)更接近漆酶活性中心的式电位(580mV),具有较快的异相电子转移速率(0.726s-1),较高的漆酶担载量(103.5mg/g)和固定漆酶比活力(1.68U/mg),较高的催化氧还原能力(氧还原起始电位820mV,在650mV时的催化峰电流为85.5μA)以及良好的重复使用性和长期使用性.