Polycationic Pillar[5]arene Derivatives: Interaction with DNA and Biological Applications

Dendritic pillar[5]arene derivatives have been efficiently prepared by grafting dendrons with peripheral Boc‐protected amine subunits onto a preconstructed pillar[5]arene scaffold. Upon cleavage of the Boc‐protected groups, water‐soluble pillar[5]arene derivatives with 20 ( 13 ) and 40 ( 14 ) peripheral ammonium groups have been obtained. The capability of these compounds to form stable nanoparticles with plasmid DNA has been demonstrated by gel electrophoresis, transmission electron microscopy (TEM), and dynamic light scattering (DLS) investigations. Transfection efficiencies of the self‐assembled 13 /pCMV‐Luc and 14 /pCMV‐Luc polyplexes have been evaluated in vitro with HeLa cells. The transfection efficiencies found for both compounds are good, and pillar[5]arenes 13 and 14 show very low toxicity if any.     

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.     

Construction of π‐Surface‐Metalated Pillar[5]arenes which Bind Anions via Anion–π Interactions

By simple ligand exchange of the cationic transition‐metal complexes [(Cp*)M(acetone)₃](OTf)₂ (Cp*=pentamethylcyclopentadienyl and M=Ir or Rh) with pillar[5]arene, mono‐ and polynuclear pillar[5]arenes, a new class of metalated host molecules, is prepared. Single‐crystal X‐ray analysis shows that the charged transition‐metal cations are directly bound to the outer π‐surface of aromatic rings of pillar[5]arene. One of the triflate anions is deeply embedded within the cavity of the trinuclear pillar[5]arenes, which is different to the host–guest behavior of most pillar[5]arenes. DFT calculation of the electrostatic potential revealed that the metalated pillar[5]arenes featured an electron‐deficient cavity due to the presence of the electron‐withdrawing transition metals, thus allowing encapsulation of electron‐rich guests mainly driven by anion–π interactions.     

Langmuir and Langmuir–Blodgett Films from Amphiphilic Pillar[5]arene‐Containing [2]Rotaxanes

Amphiphilic pillar[5]arene‐containing [2]rotaxanes have been prepared and fully characterized. In the particular case of the [2]rotaxane incorporating a 1,4‐diethoxypillar[5]arene subunit, the structure of the compound was confirmed by X‐ray crystal structure analysis. Owing to a good hydrophilic/hydrophobic balance, stable Langmuir films have been obtained for these rotaxanes and the size of the peripheral alkyl chains on the pillar[5]arene subunit has a dramatic influence on the reversibility during compression–decompression cycles. Indeed, when these are small enough, molecular reorganization of the rotaxane by gliding motions are capable of preventing strong π–π interactions between neighboring macrocycles in the thin film.     

Monoester Copillar[5]arenes: Synthesis,Unusual Self‐Inclusion Behavior,and Molecular Recognition

The self‐inclusion behavior of monoester copillar[5]arenes depends on the position of the ester group, which causes different guest selectivities. Monoester copillar[5]arenes bearing an acetate chain can form stable self‐inclusion complexes in low‐ and high‐concentration solution and exhibit high guest selectivity. However, a monoester copillar[5]arene bearing a butyrate chain can not form a self‐inclusion complex and exhibits low guest selectivity. Thus, a new class of stable self‐inclusion complexes of copillar[5]arenes was explored to improve the selectivity of molecular recognition.     

para-Bridged symmetrical pillar[5]arenes: their Lewis acid catalyzed synthesis and host-guest property

Condensation of 1,4-dimethoxybenzene (DMB) with paraformaldehyde in the presence of BF3.O(C2H5)2 gave novel para-bridged pentacyclic pillar DMB (DMpillar[5]arene). Moreover, para-bridged pentacyclic hydroquinone (pillar[5]arene) was prepared. Pillar[5]arene formed 1:1 host-guest complexes with dialkyl viologen and alkyl pyridinium derivatives. However, pillar[5]arene did not form complexes with the diadamantyl viologen derivative since a bulky adamantyl group was unable to thread the cavity of pillar[5]arene.     

Monofunctionalized pillar[5]arenes: synthesis and supramolecular structure

The first synthesis of a monohydroxy pillar[5]arene has been carried out, by controlling the de-O-methylation of per-methylated pillar[5]arene. Using monohydroxy pillar[5]arene as an intermediate, mono-guest-functionalized pillar[5]arene was prepared. It formed a self-inclusion complex in CDCl(3) whereas in acetone-d(6) dethreading of the guest moiety took place.     

Selective complexation of n-alkanes with pillar[5]arene dimers in organic media

A pillar[5]arene dimer was synthesized by linking a mono-hydroxylated pillar[5]arene with 1,4-bis(bromomethyl)benzene. The pillar[5]arene dimer formed stronger complexes with n-alkanes than did a monomeric pillar[5]arene.     

Open‐tubular capillary electrochromatography using carboxylatopillar[5]arene as stationary phase

Pillar[n]arenes have achieved much interest in material chemistry and supramolecular chemistry due to unusual pillar shape structure and high selectivity toward guest. However, pillar[n]arenes have not yet been applied in capillary electrochromatography. This work at first time reports that carboxylatopillar[5]arene is used as a stationary phase in open‐tubular capillary electrochromatography. Carboxylatopillar[5]arene not only possess the advantages of pillar[n]arenes but also provide free carboxy groups for immobilizing on the inner wall of capillary column via covalent bonding. The characterization of SEM and FT‐IR indicated that carboxylatopillar[5]arene was successfully grafted on the inner wall of capillary. The baseline separation of model analytes including neutral, basic, and acidic compounds, nonsteroidal anti‐inflammatory drugs and dansyl‐amino acids have been achieved thanks to the electron‐rich cavity of carboxylatopillar[5]arene and hydrophobic interactions between the analytes and stationary phase. The intraday, interday, and column‐to‐column precisions (RSDs) of retention time and peak area for the neutral analytes were all less than 3.34 and 9.65%, respectively. This work indicates that pillar[n]arenes have great potential in capillary electrochromatography as novel stationary phase.     

基于柱[5]芳烃主客体包结构筑分子响应型超分子水凝胶

主客体相互作用是在水溶液中与大环主体分子形成稳定的包结物的理想驱动力.以功能化的苯并咪唑衍生物为客体(M),水溶性柱[5]芳烃为主体构建了一种分子响应型超分子水凝胶.通过1H NMR, 2D NOESY和扫描电子显微镜(SEM)研究了水凝胶的成凝胶机理.有趣的是,主客体包结作用、柱[5]芳烃间有序的"外腔"π-π相互作用和分层堆积对于获得超分子水凝胶是必不可少的,非共价键相互作用的动态可逆性使凝胶体系对温度变化/化学刺激产生响应.此外,加入竞争性客体己二腈(ADN)/百草枯(PQ)后,柱[5]芳烃基水凝胶可转化为溶胶.因此,该超分子水凝胶可以选择性识别有机分子.     

Separation of Linear and Branched Alkanes Using Host–Guest Complexation of Cyclic and Branched Alkane Vapors by Crystal State Pillar[6]arene

Activated crystals of pillar[6]arene produced by removing the solvent upon heating were able to take up branched and cyclic alkane vapors as a consequence of their gate‐opening behavior. The uptake of branched and cyclic alkane vapors by the activated crystals of pillar[6]arene induced a crystal transformation to form one‐dimensional channel structures. However, the activated crystals of pillar[6]arene hardly took up linear alkane vapors because the cavity size of pillar[6]arene is too large to form stable complexes with linear alkanes. This shape‐selective uptake behavior of pillar[6]arene was further utilized for improving the research octane number of an alkane mixture of isooctane and n‐heptane: interestingly, the research octane number was dramatically improved from a low research octane number (17 %) to a high research octane number (>99 %) using the activated crystals of pillar[6]arene.     

Stereoselective Synthesis of Pillar[4]arene[1]cis‐diepoxy‐p‐dione and X‐Ray Crystal Structure of Host–Guest System

Herein, we successfully develop a novel route to give rise to polarity for the pillararenes by the introduction of oxygenated functionalities into pillar[5]arene to stereoselectively synthesize the pillar[4]arene[1]cis ‐diepoxy‐p ‐dione. Its host–guest properties with different dinitrile molecules were also investigated and characterized by NMR and X‐ray crystallography.     

Host–Guest Complexation Using Pillar[5]arene Crystals: Crystal-Structure Dependent Uptake,Release, and Molecular Dynamics of an Alkane Guest

Host–guest complexation has been mainly investigated in solution, and it is unclear how guest molecules access the assembled structures of host and dynamics of guest molecules in the crystal state. In this study, we studied the uptake, release, and molecular dynamics of n-hexane vapor in the crystal state of pillar[5]arenes bearing different substituents. Pillar[5]arene bearing 10 ethyl groups yielded a crystal structure of herringbone-type 1:1 complexes with n-hexane, whereas pillar[5]arene with 10 allyl groups formed 1:1 complexes featuring a one-dimensional (1D) channel structure. For pillar[5]arene bearing 10 benzyl groups, one molecule of n-hexane was located in the cavity of pillar[5]arene, and another n-hexane molecule was located outside of the cavity between two pillar[5]arenes. The substituent-dependent differences in molecular arrangement influenced the uptake, release, and molecular dynamics of the n-hexane guest. The substituent effects were not observed in host–guest chemistry in solution, and these features are unique for the crystal state host–guest chemistry of pillar[5]arenes.     

Synthesis of O6‐Corona[3]arene[3]pyridazines and Their Molecular Recognition Property in Organic and Aqueous Media

O₆‐Corona[3]arene[3]pyridazines were synthesized from the one‐pot macrocyclic condensation reaction of 3,6‐dichlorotetrazine with 1,4‐dihydroquinone derivatives followed by the inverse electron demand Diels‐Alder reaction of the tetrazine rings with a cyclopentanone‐derived enamine. Conversion of six ester groups within macrocycle into all sodium acetate moieties afforded a water soluble O₆‐corona[3]arene[3]pyridazine. The coronary macrocycle host formed complexes selectively with organic ammoniums and dinitrile guests in a 1: 1 stoichiometric ratio in organic solvents with association constants ranging from (2.96 ± 0.10) × 10¹ to (2.53 ± 0.33) × 10⁵ L·mol⁻¹. Water soluble O₆‐corona[3]arene[3]pyridazine was also able to complex strongly with organic ammoniums in water to give an association constant up to (2.67 ± 0.21) × 10⁴ L·mol⁻¹. The pseudo‐rotaxane and inclusion structures of the host‐guest complexes were revealed by the X‐ray crystallography.     

Monofunctionalized pillar[5]arene as a host for alkanediamines

Alkanediamines serve as neutral guests for the recently discovered host pillar[5]arene. The proposed [2]pseudorotaxane nature of the superstructure of the 1:1 host-guest complexes is supported by the template-directed synthesis of a related [2]rotaxane. A synthetic route to monofunctional pillar[5]arenes has also been developed, allowing for the creation of a fluorescent sensor for alkylamine binding. The precursors to this host could act as starting points for a large library of monofunctional pillar[5]arene macrocycles.     

Host–Guest Complexation of Perethylated Pillar[5]arene with Alkanes in the Crystal State

Activated perethylated pillar[5]arene crystals show an unexpected alkane‐shape‐ and ‐length‐selective gate‐opening behavior. Activated crystals were obtained upon removing solvents from perethylated pillar[5]arene crystals by heating. The activated crystals could quantitatively take up n‐alkanes with carbon chains containing more than five carbon atoms as a consequence of their gate‐opening pressure. As the chain length of the n‐alkanes increased, the gate pressure decreased. A transformation into a herringbone structure was induced when n‐hexane was used as a guest. By contrast, cyclic and branched alkanes were not taken up and could not induce a crystal transformation because they were too large to fit in the cavities of the pillar[5]arene. Alkane‐shape‐selective molecular recognition of pillar[5]arenes in the solution state was translated into the vapor/crystal state.     

Enhanced head-to-head photodimers in the photocyclodimerization of anthracenecarboxylic acid with a cationic pillar[6]arene

The complexation behaviors of anthracenecarboxylic acid and water-soluble cationic pillararenes have been investigated by ¹H NMR, UV-vis and ITC methods. The cationic pillar[6]arene was found to stepwise form 1:1 and 1:2 complexes, having a large K₁ and a relatively small K₂ values. Photocyclodimerization of AC within the pillar[6]arene improved the yield of the head-to-head photodimers. Up to 4.97 HH/HT ratio has been reached by optimizing the reaction conditions.     

Construction of anion‐responsive crosslinked polypseudorotaxane based on molecular recognition of pillar[5]arene

A pillar[5]arene pendant polymer (Poly‐P[5]A) is synthesized via ROMP using Grubb's first‐generation catalyst. GPC analysis of the polymer suggested ~30 pendant pillar[5]arene units in the polymer. Supramolecular polypseudorotaxane assembly is constructed by intermolecularly crosslinking pendant pillar[5]arene units using a bispyridinium guest via host–guest complexation. Formation of the polypseudorotaxane assembly is characterized by 1D/2D NMR techniques and DLS analysis. Moreover, anion‐responsiveness of the polypseudorotaxane assembly is demonstrated by ¹H NMR spectroscopic analysis using chloride anion as external stimulus. Scanning electron microscopic analysis of the poly‐P[5]A showed breath‐figure assembly and upon crosslinking with G.2PF₆ the polymer self‐assemble to give a supramolecular polymer network. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1508–1515     

Synthesis of conformationally diverse tetrathiacalix[4]arene(amido)crowns and tetrathiacalix[4]arene amides with pendant amine functions

A series of conformationally diverse novel tetrathiacalix[4]arene(amido)crowns and amides from tetrakis((ethoxycarbonyl)methoxy)p-tert-butyl tetrathiacalix[4]arene and its debutylated analog have been prepared by their reaction with diamines [H₂N(CH₂)_nNH₂; n=2,3,4, and 6] and polyamines. It has been determined that the length of the alkyl spacer in diamines is pivotal for the formation of either the tetrathiacalix[4]arene bis(amido)crowns or tetrathiacalix[4]arene amides with pendant amine functions. The synthesized compounds represent potential building blocks for achieving sophisticated molecular assemblies for molecular organization and recognition. Single crystal X-ray analysis of tetrathiacalix[4]arene bis(amido)crown 6a revealed that it has a 1,3-alternate conformation, which forms supramolecular complexes with chloroform.     

Synthesis of a water-soluble pillar[6]arene dodecaamine and its selective binding of acidic amino acids in water

A water-soluble pillar[6]arene dodecaamine has been synthesized. ¹H NMR and fluorescence studies indicate that pillar[6]arene dodecaamine could selectively and strongly bind acidic amino acids, i.e. glutamic acid and aspartic acid in water. And the complexation behavior of pillar[6]arene dodecaamine towards acidic tripeptide glutathione and short chain length (C₃ to C₈) dicarboxylic acids in water is also investigated.