Robust Inclusion Complexes of Crown Ether Fused Tetrathiafulvalenes with Li+@C60 to Afford Efficient Photodriven Charge Separation

Inclusion complexes of benzo‐ and dithiabenzo‐crown ether functionalized monopyrrolotetrathiafulvalene (MPTTF) molecules were formed with Li⁺@C₆₀ ( 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀). The strong complexation has been quantified by high binding constants that exceed 10⁶ M ^?1 obtained by UV/Vis titrations in benzonitrile (PhCN) at room temperature. On the basis of DFT studies at the B3LYP/6‐311G(d,p) level, the orbital interactions between the crown ether moieties and the π surface of the fullerene together with the endohedral Li⁺ have a crucial role in robust complex formation. Interestingly, complexation of Li⁺@C₆₀ with crown ethers accelerates the intersystem crossing upon photoexcitation of the complex, thereby yielding ³(Li⁺@C₆₀)*, when no charge separation by means of ¹Li⁺@C₆₀* occurs. Photoinduced charge separation by means of ³Li⁺@C₆₀* with lifetimes of 135 and 120 μs for 1? Li⁺@C₆₀ and 2? Li⁺@C₆₀, respectively, and quantum yields of 0.82 in PhCN have been observed by utilizing time‐resolved transient absorption spectroscopy and then confirmed by electron paramagnetic resonance measurements at 4 K. The difference in crown ether structures affects the binding constant and the rates of photoinduced electron‐transfer events in the corresponding complex.     

Electron Donor–Acceptor Interactions in Regioselectively Synthesized exTTF2–C70(CF3)10 Dyads

The decakis(trifluoromethyl)fullerene C₁‐C₇₀(CF₃)₁₀, in which the CF₃ groups are arranged on a para⁷‐meta‐para ribbon of C₆(CF₃)₂ edge‐sharing hexagons, and which has now been prepared in quantities of hundreds of milligrams, was reacted under standard Bingel–Hirsch conditions with a bis‐π‐extended tetrathiafulvalene (exTTF) malonate derivative to afford a single exTTF₂–C₇₀(CF₃)₁₀ regioisomer in 80 % yield based on consumed starting material. The highly soluble hybrid was thoroughly characterized by using 1D ¹H, ¹³C, and ¹⁹F NMR, 2D NMR, and UV/Vis spectroscopy; matrix‐assisted laser desorption ionization (MALDI) mass spectrometry; and electrochemistry. The cyclic voltammogram of the exTTF₂–C₇₀(CF₃)₁₀ dyad revealed an irreversible second reduction process, which is indicative of a typical retro‐Bingel reaction; whereas the usual phenomenon of exTTF inverted potentials (${E{{1\hfill \atop {\rm ox}\hfill}}}$ >${E{{2\hfill \atop {\rm ox}\hfill}}}$ ), resulting in a single, two‐electron oxidation process, was also observed. Steady‐state and time‐resolved photolytic techniques demonstrated that the C₁‐C₇₀(CF₃)₁₀ singlet excited state is subject to a rapid electron‐transfer quenching. The resulting charge‐separated states were identified by transient absorption spectroscopy, and radical pair lifetimes of the order of 300 ps in toluene were determined. The exTTF₂–C₇₀(CF₃)₁₀ dyad represents the first example of exploitation of the highly soluble trifluoromethylated fullerenes for the construction of systems able to mimic the photosynthetic process, and is therefore of interest in the search for new materials for photovoltaic applications.     

Coordinative Interactions between Porphyrins and C60, La@C82, and La2@C80

For the first time, a C₆₀ derivative ( 1 ) and two different lanthanum metallofullerene derivatives, La@C₈₂Py ( 2 ) and La₂@C₈₀Py ( 3 ), that feature a pyridyl group as a coordination site for transition‐metal ions have been synthesized and integrated as electron acceptors into coordinative electron‐donor/electron‐acceptor hybrids. Zinc tetraphenylporphyrin ( ZnP ) served as an excited‐state electron donor in this respect. Our investigations, by means of steady‐state and time‐resolved photophysical techniques found that electron transfer governs the excited‐state deactivation in all of these systems, namely 1/ZnP , 2/ZnP , and 3/ZnP , whereas, in the ground state, notable electronic interactions are lacking. Variation of the electron‐accepting fullerene or metallofullerene moieties provides the incentive for fine‐tuning the binding constants, the charge‐separation kinetics, and the charge‐recombination kinetics. To this end, the binding constants, which ranged from log K_assoc=3.94–4.38, are dominated by axial coordination, with minor contributions from the orbital overlap of the curved and planar π systems. The charge‐separation and charge‐recombination kinetics, which are in the order of 10¹⁰ and 10⁸ s^?1, relate to the reduction potential of the fullerene and metallofullerenes, respectively.     

Air‐Stable,Narrow‐Band‐Gap Ambipolar C60 Fullerene–Hydrazone Hybrid Materials

Fullerene–hydrazone dyads have been synthesized using the Confalone reaction followed by condensation with phenylhydrazines. Room‐temperature xerographic time‐of‐flight, ionization potential, and cyclic voltammetry measurements indicate that these narrow‐band‐gap (E_g<1.5 eV), ambipolar charge‐transporting dyads with balanced hole‐ and electron mobilities, which operate in air, are attractive materials for various optoelectronic applications.     

New Conjugated Molecules with Two and Three Dithienyldiketopyrrolopyrrole (DPP) Moieties Substituted at meta Positions of Benzene toward p‐ and n‐Type Organic Photovoltaic Materials

Two conjugated molecules, TADPP3 and TADPP2‐TT , are reported, in which three and two dithienyldiketopyrrolopyrrole (DPP) moieties, respectively, are substituted at the meta positions of benzene. Based on cyclic voltammetry and absorption data, TADPP3 and TADPP2‐TT possess similar HOMO and LUMO energies of about ?5.2 and ?3.4 eV, respectively. Thin films of TADPP3 and TADPP2‐TT exhibit p‐type semiconducting behavior with hole mobilities of 2.36×10^?3 and 3.76×10^?4 cm² V^?1 s^?1 after thermal annealing. Molecules TADPP3 and TADPP2‐TT were utilized as p‐type photovoltaic materials to fabricate organic solar cells after blending with phenyl C₇₁ butyric acid methyl ester ( PC₇₁BM ) and phenyl C₆₁ butyric acid methyl ester ( PC₆₁BM ). The relatively low J_SC and fill factor values can be attributed to poor film morphologies based on AFM and XRD studies. A solar cell with a thin film of TADPP3 with PC₇₁BM in a weight ratio of 1:2 exhibits a high open‐circuit voltage (V_OC) of 0.99 V and a power conversion efficiency (PCE) of 2.47 %. Interestingly, TADPP3 can also be employed as an n‐type photovoltaic material. The blended thin film of TADPP3 with P3HT in a weight ratio of 1:2 gave a high V_OC of 1.11 V and a PCE of 1.08 % after thermal annealing.     

Probing Supramolecular Interactions between a Crown Ether Appended Zinc Phthalocyanine and an Ammonium Group Appended to a C60 Derivative

Self‐assembly driven by crown ether complexation of zinc phthalocyanines equipped with one 18‐crown‐6 moiety and fullerenes bearing an ammonium head group afforded a novel donor–acceptor hybrid. In reference experiments, fullerenes containing a Boc‐protected amine functionality have been probed. The circumvention of zinc phthalocyanine aggregation is important for the self‐assembly, which required the addition of pyridine. From absorption and fluorescence titration assays, which provided sound and unambiguous evidence for mutual interactions between the electron donor and the electron acceptor within the hybrids, association constants in the order of 8.0×10⁵ m ^?1 have been derived. The aforementioned is based on 1:1 stoichiometries, which have been independently confirmed by Job's plot measurements. In the excited state, which has been examined by transient absorption experiments, intermolecular charge separation evolves from the photoexcited zinc phthalocyanine to the fullerene subunit and leads to short‐lived charge‐separated states. Interestingly, photoexcitation of zinc phthalocyanine dimers/aggregates can also be followed by an intermolecular charge separation between vicinal phthalocyanines. These multicomponent supramolecular ensembles have also been shown by in‐depth electrospray ionization mass spectrometry (ESI‐MS) studies, giving rise to the formation and detection of a variety of non‐covalently linked species.     

“Two‐Point” Self‐Assembly and Photoinduced Electron Transfer in meso‐Donor‐Carrying Bis(styryl crown ether)‐BODIPY–Bis(alkylammonium)fullerene Donor–Acceptor Conjugates

BF₂‐chelated dipyrromethene, BODIPY, was functionalized to carry two styryl crown ether tails and a secondary electron donor at the meso position. By using a “two‐point” self‐assembly strategy, a bis‐alkylammonium‐functionalized fullerene (C₆₀) was allowed to self‐assemble the crown ether voids of BODIPY to obtain multimodular donor–acceptor conjugates. As a consequence of the two‐point binding, the 1:1 stoichiometric complexes formed yielded complexes of higher stability in which fluorescence of BODIPY was found to be quenched; this suggested the occurrence of excited‐state processes. The geometry and electronic structure of the self‐assembled complexes were derived from B3LYP/3‐21G(*) methods in which no steric constraints between the entities was observed. An energy‐level diagram was established by using spectral, electrochemical, and computational results to help understand the mechanistic details of excited‐state processes originating from ¹bis‐styryl‐BODIPY*. Femtosecond transient absorbance studies were indicative of the formation of an exciplex state prior to the charge‐separation process to yield a bis‐styryl‐BODIPY ^{. +}–C₆₀ ^{. −} radical ion pair. The time constants for charge separation were generally lower than charge‐recombination processes. The present studies bring out the importance of multimode binding strategies to obtain stable self‐assembled donor–acceptor conjugates capable of undergoing photoinduced charge separation needed in artificial photosynthetic applications.     

Multi‐Responsive Supramolecular Gels Based on Charge Transfer Interactions

We report the co‐assembly of aromatic donor (D) and acceptor (A) molecules into purple sponge‐like supramolecular gels through susceptible charge transfer interactions with the aid of solvophobic interactions. The gel remained intact with the addition of up to 23 % (v/v) of nonpolar good solvents, such as toluene and xylene, but dissociated in the presence of <2 % (v/v) of polar solvents, such as tetrahydrofuran, ethyl acetate, and alcohols, with highly distinguishable changes of color. Notably, the gel dissolved within 1 min and the solution turned blue when 0.1 % (v/v) of methanol was added. The response to trifluoroacetic acid was extremely sensitive (i.e., the gel vanished immediately in the presence of 2 equivalents of trifluoroacetic acid), and the subsequent addition of trimethylamine could recover the purple gel. The multiple and visible response thus render the D–A gels as a potential detector for sensing complex chemical environments.     

Rectification in Supramolecular Zinc Porphyrin/Fulleropyrrolidine Dyads Self‐Organized on Gold(111)

Self‐assembled donor/acceptor dyads are of current interest as they are biomimetic to the natural photosynthetic conversion system. Herein, we present an ultrahigh‐vacuum scanning tunneling microscopy and scanning tunneling spectroscopy (UHV‐STM/STS) study of ex situ self‐assembled supramolecular dyads consisting of fulleropyrrolidines (PyC₂C₆₀) axially ligated to zinc(II) tetraphenylporphyrin (ZnTPP), self organized on a 4‐aminothiophenol (4‐ATP) self‐assembled monolayer on gold(111). These dyads show both bias‐polarity‐dependent apparent height in STM images and highly rectifying behavior in tunneling spectroscopy. First‐principles density functional theory calculations clarify the conformational and electronic properties of the 4‐ATP/ZnTPP/PyC₂C₆₀ system. Interestingly, we find easier tunneling for electrons moving from the acceptor side of the dyads to the donor side, in the inverse‐rectifying sense with respect to previously reported molecular rectifiers. Such behavior cannot be explained as an elastic resonant tunneling process, but it can by using a model based on the Aviram–Ratner mechanism.     

Mono‐ and Bis(pyrrolo)tetrathiafulvalene Derivatives Tethered to C60: Synthesis,Photophysical Studies,and Self‐Assembled Monolayers

A series of mono‐ (MPTTF) and bis(pyrrolo)tetrathiafulvalene (BPTTF) derivatives tethered to one or two C₆₀ moieties was synthesized and characterized. The synthetic strategy for these dumbbell‐shaped compounds was based on a 1,3‐dipolar cycloaddition reaction between aldehyde‐functionalized MPTTF/BPTTF derivatives, two different tailor‐made amino acids, and C₆₀. Electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties was studied by a variety of techniques including cyclic voltammetry and absorption spectroscopy. These solution‐based studies indicated no observable electronic communication between the MPTTF/BPTTF units and the C₆₀ moieties. In addition, femtosecond and nanosecond transient absorption spectroscopy revealed, rather surprisingly, that no charge transfer from the MPTTF/BPTTF units to the C₆₀ moieties takes place on excitation of the fullerene moiety. Finally, it was shown that the MPTTF–C₆₀ and C₆₀–BPTTF‐C₆₀ dyad and triad molecules formed self‐assembled monolayers on a Au(111) surface by anchoring to C₆₀.     

Quantum Mechanical and Experimental Validation that Cyclobis(paraquat‐p‐phenylene) Forms a 1:1 Inclusion Complex with Tetrathiafulvalene

The promiscuous encapsulation of π‐electron‐rich guests by the π‐electron‐deficient host, cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺), involves the formation of 1:1 inclusion complexes. One of the most intensely investigated charge‐transfer (CT) bands, assumed to result from inclusion of a guest molecule inside the cavity of CBPQT⁴⁺, is an emerald‐green band associated with the complexation of tetrathiafulvalene (TTF) and its derivatives. This interpretation was called into question recently in this journal based on theoretical gas‐phase calculations that reinterpreted this CT band in terms of an intermolecular side‐on interaction of TTF with one of the bipyridinium (BIPY²⁺) units of CBPQT⁴⁺, rather than the encapsulation of TTF inside the cavity of CBPQT⁴⁺. We carried out DFT calculations, including solvation, that reveal conclusively that the CT band emerging upon mixing TTF with CBPQT⁴⁺ arises from the formation of a 1:1 inclusion complex. In support of this conclusion, we have performed additional experiments on a [2]rotaxane in which a TTF unit, located in the middle of its short dumbbell, is prevented sterically from interacting with either one of the two BIPY²⁺ units of a CBPQT⁴⁺ ring residing on a separate [2]rotaxane in a side‐on fashion. This [2]rotaxane has similar UV/Vis and ¹H NMR spectroscopic properties with those of 1:1 inclusion complexes of TTF and its derivatives with CBPQT⁴⁺. The [2]rotaxane exists as an equimolar mixture of cis‐ and trans‐isomers associated with the disubstituted TTF unit in its dumbbell component. Solid‐state structures were obtained for both isomers, validating the conclusion that the TTF unit, which gives rise to the CT band, resides inside CBPQT⁴⁺.     

Supramolecular Hierarchy among Halogen‐Bond Donors

Through a combination of structural chemistry, vibrational spectroscopy, and theory, we have systematically examined the relative structure‐directing importance of a series of ditopic halogen‐bond (XB) donors. The molecular electrostatic potential surfaces of six XB donors were evaluated, which allowed for a charge‐based ranking. Each molecule was then co‐crystallized with 21 XB acceptors and the results have made it possible to map out the supramolecular landscape describing the competition between I/Br–ethynyl donors, perfluorinated I/Br donors, and I/Br–phenyl based donors. The results offer practical guidelines for synthetic crystal engineering driven by robust and directional halogen bonds.     

Supramolecular inclusion complexes of two cyclic zinc bisporphyrins with C60 and C70: structural, thermodynamic, and photophysical characterization

The formation of thermodynamically stable inclusion complexes between two cyclic zinc bisporphyrins, differing in the saturation degree of the hydrocarbon linkers that connect their porphyrin units, and the fullerenes C(60) and C(70) is described. Binding and photophysical studies were performed in two solvents of very different polarity: toluene and dichloromethane. UV/Vis and fluorescence titration experiments showed π-π interactions between the cyclic zinc bisporphyrins and the fullerenes. Solid-state structures were determined by X-ray diffraction analysis and gave valuable insight into the different complexation behaviors of the two macrocyclic systems towards the fullerenes. NMR titrations were also helpful in understanding the geometry of the complexes in solution. Upon fullerene complexation, the two macrocyclic bisporphyrins adopt very distinct conformations. Charge-transfer absorption bands point to ground-state interactions, and quenching of the porphyrin component luminescence indicates fast reactivity in the excited states. Energy transfer plus HOMO-HOMO and LUMO-LUMO electron-transfer processes occur within the complexes. Charge-separated states characterized by a reduced fullerene and an oxidized porphyrin radical, with lifetimes in the order of several hundred picoseconds, are detected.     

An AAA–DDD Triply Hydrogen‐Bonded Complex Easily Accessible for Supramolecular Polymers

For a complementary hydrogen‐bonded complex, when every hydrogen‐bond acceptor is on one side and every hydrogen‐bond donor is on the other, all secondary interactions are attractive and the complex is highly stable. AAA–DDD (A=acceptor, D=donor) is considered to be the most stable among triply hydrogen‐bonded sequences. The easily synthesized and further derivatized AAA–DDD system is very desirable for hydrogen‐bonded functional materials. In this case, AAA and DDD, starting from 4‐methoxybenzaldehyde, were synthesized with the Hantzsch pyridine synthesis and Friedländer annulation reaction. The association constant determined by fluorescence titration in chloroform at room temperature is 2.09×10⁷ M ^?1. The AAA and DDD components are not coplanar, but form a V shape in the solid state. Supramolecular polymers based on AAA–DDD triply hydrogen bonded have also been developed. This work may make AAA–DDD triply hydrogen‐bonded sequences easily accessible for stimuli‐responsive materials.     

Supramolecular Assemblies for Electronic Materials

This work presents a synergy between organic electronics and supramolecular chemistry, in which a host–guest complex is designed to function as an efficacious electronic material. Specifically, the noncovalent recognition of a fullerene, phenyl-C₆₁-butyric acid methyl ester ( PC₆₁BM ), by an alternating perylene diimide ( P )-bithiophene ( B ) conjugated macrocycle ( PBPB ) results in a greater than five-fold enhancement in electron mobility, relative to the macrocycle alone. Characterization and quantification of the binding of fullerenes by host PBPB is provided alongside evidence for intermolecular electronic communication within the host–guest complexes.     

A Charge‐Transfer‐Induced Self‐Healing Supramolecular Hydrogel

In this study, a dual‐component charge‐transfer (CT)‐induced supramolecular hydrogel was fabricated using pyrene‐tailored pyridinium (PYP) and 2,4,7‐trinitrofluorenone (TNF) as the electron donor and acceptor, respectively. Its thermal stability and mechanical property have been modulated effectively by altering the concentration or molar ratio of PYP and TNF. Moreover, this CT hydrogel exhibited a distinct injectable self‐healing property that could be utilized to create desired patterns on substrates. Such property holds potential for this CT hydrogel in fields like three‐dimensional printing and surface coating.