Catalytic Kinetic Resolution by Enantioselective Aromatization: Conversion of Racemic Intermediates of the Barton–Zard Reaction into Enantioenriched 3‐Arylpyrroles

Racemic 3,4‐dihydro‐2H‐pyrroles, hypothetical intermediates of the Barton–Zard reaction, were synthesized in a highly diastereoselective manner and fully characterized for the first time. Kinetic resolution of the dihydropyrroles with a quinine‐derived thiourea afforded the (+)‐3‐arylpyrrole products and recovered (+)‐3,4‐dihydro‐2H‐pyrroles with high efficiency (s‐factor up to 153). The resolved (+)‐3,4‐dihydro‐2H‐pyrroles underwent subsequent aromatization with a quinidine‐derived thiourea catalyst to afford (?)‐3‐arylpyrroles with excellent central‐to‐axial chirality transfer. In contrast to the well‐accepted Barton–Zard mechanism, the aromatization of the 3,4‐dihydro‐2H‐pyrroles in the presence of a bifunctional catalyst is believed to proceed by an unprecedented sequence involving syn elimination of HNO₂ and aromatization.     

Efficient and Mild Protocol for the Synthesis of 4(3)-Substituted 3(4)-Nitro-1H-pyrroles and 3-Substituted 4-Methyl-2-tosyl-1 H-pyrroles from Nitroolefins and Tosylmethyl Isocyanide in Ionic Liquids

A mild and convenient method for the synthesis of 4(3)‐substituted 3(4)‐nitro‐1H‐pyrroles and 3‐substituted 4‐methyl‐2‐tosyl‐1H‐pyrroles from nitroolefins and tosylmethyl isocyanide (TosMIC) in ionic liquid 1‐butyl‐3‐methylimidazolium bromide ([bmIm]Br) was developed. The reactions were performed at room temperature with KOH as base with good yields in a short time (about 2 h). Some tough conditions, such as absolutely anhydrous organic solvents, low temperature, hazardous and expensive strong base or organic base, were not needed. The yields of 4(3)‐substituted 3(4)‐nitro‐1H‐pyrroles were moderate, but excellent yields were achieved for the preparation of 3‐substituted 4‐methyl‐2‐tosyl‐1H‐pyrroles. This strategy was quite general and it worked in a broad range of nitroolefins with aromatic, aliphatic or heterocyclic substituents. The recovered ionic liquid could be reused as solvent for several times without significant decrease of reaction yields.     

Palladium‐Catalyzed Aza‐Wittig‐Type Condensation of Isoxazol‐5(4H)‐ones with Aldehydes

This paper describes the development of a palladium‐catalyzed decarboxylative inter‐ and intramolecular condensation reaction of isoxazol‐5(4 H)‐ones with carbonyl compounds in the presence of PPh₃, giving various 2‐azabuta‐1,3‐dienes or pyrroles in moderate to high yields.     

Multicomponent Approach Towards the Synthesis of Substituted Pyrroles under Supramolecular Catalysis Using β‐Cyclodextrin as a Catalyst in Water Under Neutral Conditions

Synthesis of substituted pyrroles in H₂O by using β‐cyclodextrin as a supramolecular catalyst is described. This reaction has several advantages over existing methods and provides substituted pyrroles in good‐to‐excellent yields (79–89%). The supramolecular catalysis of the reaction was studied using ¹H‐NMR spectroscopy. β‐Cyclodextrin can be recovered and reused several times without loss of activity.     

Enantioselective Synthesis of Pyrrole‐Based Spiro‐ and Polycyclic Derivatives by Iridium‐Catalyzed Asymmetric Allylic Dearomatization and Controllable Migration Reactions

The first highly diastereo‐ and enantioselective synthesis of five‐membered spiro‐2H‐pyrroles was achieved using an Ir‐catalyzed asymmetric allylic dearomatization reaction. The spiro‐2H‐pyrrole derivatives readily undergo a controllable and stereospecific allylic migration under acid catalysis, providing polycyclic pyrrole derivatives in excellent yields and ee values. Additionally, the novel Ir‐complex K1 , derived from [Ir(cod)Cl]₂ (cod=1,5‐cyclooctadiene) and N‐benzhydryl‐N‐phenyldinaphthophosphoramidite (BHPphos), showed excellent control of both diastereo‐ and enantioselectivities.     

Access to Indoles via Diels–Alder Reactions of 5‐Methylthio‐2‐vinylpyrroles with Maleimides

Diels–Alder reactions of 5‐methylthio‐2‐vinyl‐1H‐pyrroles with maleimides followed by isomerization gave tetrahydroindoles in moderate to good yield. Aromatization using activated MnO₂ in refluxing toluene gave the corresponding 2‐methylthioindoles in good yields, and demethylthioation using Raney nickel gave the 2‐H indoles in excellent yields. The protection of the adducts produced aromatization in improved yield, demonstrating the effectiveness of the methylthio group as a protecting group for pyrroles; however, 5‐methylthio‐2‐vinylpyrrole was shown to perform with slightly less efficiency than 2‐vinylpyrrole in Diels–Alder reactions, indicating the protective group was more deactivating than desired. This route toward indoles offers high convergency and conveniently available starting materials that are easily purified. Bis‐methylthioated vinylpyrroles were shown to have potential as highly activated Diels–Alder dienes.     

An efficient one‐pot synthesis of 2‐benzylpyrroles and 3‐benzylindoles

One‐pot regioselective benzylation of pyrroles and indoles using zirconium tetrachloride is discussed. This has been achieved by in‐situ generation of di(1H‐pyrrol‐1‐yl)zirconium(IV) chloride and di(1H‐indol‐1‐yl)zirconium(IV) chloride. It was observed that benzylation reactions of these complexes using n‐BuLi occurred at C‐2 position for pyrrole and C‐3 for indole. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Tunable Fluorophores Based on 2‐(N‐Arylimino)pyrrolyl Chelates of Diphenylboron: Synthesis,Structure, Photophysical Characterization,and Application in OLEDs

Reactions of 2‐(N‐arylimino)pyrroles (HNC₄H₃C(H)?N‐Ar) with triphenylboron (BPh₃) in boiling toluene afford the respective highly emissive N,N′‐boron chelate complexes, [BPh₂{κ²N,N′‐NC₄H₃C(H)?N‐Ar}] (Ar=C₆H₅ ( 12 ), 2,6‐Me₂‐C₆H₃ ( 13 ), 2,6‐iPr₂‐C₆H₃ ( 14 ), 4‐OMe‐C₆H₄ ( 15 ), 3,4‐Me₂‐C₆H₃ ( 16 ), 4‐F‐C₆H₄ ( 17 ), 4‐NO₂‐C₆H₄ ( 18 ), 4‐CN‐C₆H₄ ( 19 ), 3,4,5‐F₃‐C₆H₂ ( 20 ), and C₆F₅ ( 21 )) in moderate to high yields. The photophysical properties of these new boron complexes largely depend on the substituents present on the aryl rings of their N‐arylimino moieties. The complexes bearing electron‐withdrawing aniline substituents 17 – 20 show more intense (e.g., ?_f=0.71 for Ar=4‐CN‐C₆H₄ ( 19 ) in THF), higher‐energy (blue) fluorescent emission compared to those bearing electron‐donating substituents, for which the emission is redshifted at the expense of lower quantum yields (?_f=0.13 and 0.14 for Ar=4‐OMe‐C₆H₄ ( 15 ) and 3,4‐Me₂‐C₆H₃ ( 16 ), respectively, in THF). The presence of substituents bulkier than a hydrogen atom at the 2,6‐positions of the aryl groups strongly restricts rotation of this moiety towards coplanarity with the iminopyrrolyl ligand framework, inducing a shift in the emission to the violet region (λ_max=410–465 nm) and a significant decrease in quantum yield (?_f=0.005, 0.023, and 0.20 for Ar=2,6‐Me₂‐C₆H₃ ( 13 ), 2,6‐iPr₂‐C₆H₃ ( 14 ), and C₆F₅ ( 21 ), respectively, in THF), even when electron‐withdrawing groups are also present. Density functional theory (DFT) and time‐dependent DFT (TD‐DFT) calculations have indicated that the excited singlet state has a planar aryliminopyrrolyl ligand, except when prevented by steric hindrance (ortho substituents). Calculated absorption maxima reproduce the experimental values, but the error is higher for the emission wavelengths. Organic light‐emitting diodes (OLEDs) have been fabricated with the new boron complexes, with luminances of the order of 3000 cd m^?2 being achieved for a green‐emitting device.     

Palladium‐Catalyzed Cyclization Reaction of o‐Haloanilines,CO2 and Isocyanides: Access to Quinazoline‐2,4(1H,3H)‐diones

Quinazoline‐2,4(1H,3H)‐diones are core structural subunits frequently found in many biologically important compounds. The reaction of 2‐​aminobenzonitrile and CO₂, which was frequently studied, only provided N3‐unsubstituted quinazoline‐2,4(1H,3H)‐dione compounds. Herein we report palladium‐catalyzed cyclization reactions of o‐haloanilines, CO₂ and isocyanides to prepare N3‐substituted quinazoline‐2,4(1H,3H)‐diones. Electron‐rich o‐bromoanilines participated in the cyclization reaction using Cs₂CO₃ at high temperature, and electron‐deficient o‐bromoaniline or o‐iodoaniline substrates conducted the reaction using CsF as base to deliver corresponding quinazoline‐2,4(1H,3H)‐dione products in good yields.     

ZrOCl2·8H2O as a highly efficient,eco‐friendly and recyclable Lewis acid catalyst for one‐pot synthesis of N‐substituted pyrroles under solvent‐free conditions at room temperature

A new and efficient method for the synthesis of a variety of N‐substituted pyrroles from condensation reactions of 2,5‐hexanedione with amines or diamines using ZrOCl₂·8H₂O as a water‐tolerant Lewis acid catalyst at room temperature is described.The use of nontoxic, inexpensive, easily available and reusable catalyst under solvent‐free conditions make this protocol practical, environmentally friendly and economically attractive. Copyright © 2011 John Wiley & Sons, Ltd.     

Direct Synthesis of Highly Substituted Pyrroles and Dihydropyrroles Using Linear Selective Hydroacylation Reactions

Rhodium(I) catalysts incorporating small bite‐angle diphosphine ligands, such as (Cy₂P)₂NMe or bis(diphenylphosphino)methane (dppm), are effective at catalysing the union of aldehydes and propargylic amines to deliver the linear hydroacylation adducts in good yields and with high selectivities. In situ treatment of the hydroacylation adducts with p‐TSA triggers a dehydrative cyclisation to provide the corresponding pyrroles. The use of allylic amines, in place of the propargylic substrates, delivers functionalised dihydropyrroles. The hydroacylation reactions can also be combined in a cascade process with a Rh^I‐catalysed Suzuki‐type coupling employing aryl boronic acids, providing a three‐component assembly of highly substituted pyrroles.     

Reactivity of Hydroxy and Amino Derivatives of 2‐Phenyl‐1H‐imidazoline and 2‐Phenyl‐1H‐imidazole toward Isocyanates: Synthesis of Appropriate Carbamates and Ureas

Reactivity of 2‐(4‐hydroxyphenyl)‐1H‐imidazoline and 2‐(4‐hydroxyphenyl)‐1H‐imidazole toward substituted phenyl isocyanates was studied. When mentioned imidazoline was treated with 2.5 equiv of substituted phenyl isocyanate, three N,O‐dicarboxamides were prepared (substituents are H, 4‐NO₂, and 4‐CH₃). Subsequently, N,O‐diacetylated 2‐(4‐hydroxyphenyl)‐1H‐imidazoline was prepared and selective deprotection method was developed for preparation of 1‐acetyl‐2‐(4‐hydroxyphenyl)‐1H‐imidazoline using diethylamine in acetone. Six carbamates derived from this imidazoline were then prepared using 1.1 equiv of substituted phenyl isocyanates (substituents are H, 4‐CH₃, 4‐OCH₃, 4‐NO₂, 4‐CN, and 3‐CF₃). Finally, two carbamates were prepared from 2‐(4‐hydroxyphenyl)‐1H‐imidazole (substituents are 4‐NO₂ and 4‐CN). No reactivity to imidazole ring was observed in this case. Eight derivatives were subjected to antimycobacterial screening. Concurrently, reactivity of 2‐(2‐aminophenyl)‐ and 2‐(2‐hydroxyphenyl)‐1H‐imidazole toward aliphatic and aromatic isocyanates was studied. Eight ureas were prepared using equivalent mixture of 2‐(2‐aminophenyl)‐1H‐imidazole and isocyanate (Et, Pr, isoPr, terc‐Bu, Cy, Ph, 4‐CH₃C₆H₄, 4‐CNC₆H₄). Similar attempts to obtain related carbamates from 2‐(2‐hydroxyphenyl)‐1H‐imidazole lead only to three substituted phenyl carbamates (substituents are 4‐CH₃, 4‐NO₂, and 4‐CN). In both cases, no reactivity to imidazole ring was observed again.     

Highly Ordered Mesoporous Tungsten Oxides with a Large Pore Size and Crystalline Framework for H2S Sensing

An ordered mesoporous WO₃ material with a highly crystalline framework was synthesized by using amphiphilic poly(ethylene oxide)‐b‐polystyrene (PEO‐b‐PS) diblock copolymers as a structure‐directing agent through a solvent‐evaporation‐induced self‐assembly method combined with a simple template‐carbonization strategy. The obtained mesoporous WO₃ materials have a large uniform mesopore size (ca. 10.9 nm) and a high surface area (ca. 121 m² g^?1). The mesoporous WO₃‐based H₂S gas sensor shows an excellent performance for H₂S sensing at low concentration (0.25 ppm) with fast response (2 s) and recovery (38 s). The high mesoporosity and continuous crystalline framework are responsible for the excellent performance in H₂S sensing.     

Easy formation of SNH products in reactions of indoles and pyrroles with 3-aryl-1,2,4-triazin-5(2H)-ones in the presence of tosyl chloride

The reactions of 3-aryl-1,2,4-triazin-5(2H)-ones with indoles and pyrroles in the presence of p-toluenesulfonyl chloride afforded 3-aryl-6-hetaryl-1,2,4-triazin-5(2H)-ones in high yields. The latter are products of the nucleophilic substitution of hydrogen.     

Phosphine (oxide)‐(thio) phenolate palladium complexes: Synthesis,characterization and (co)polymerization of norbornene

A series of palladium complexes ( 2a–2g ) ( 2a : [6‐^tBu‐2‐PPh₂‐C₆H₃O]PdMe(Py); 2b : [6‐C₆F₅–2‐PPh₂‐C₆H₃O]PdMe(Py); 2c : [6‐^tBu‐2‐PPh^tBu‐C₆H₃O]PdMe(Py); 2d : [2‐PPh^tBu‐C₆H₄O] PdMe(Py); 2e : [6‐SiMe₃–2‐PPh₂‐C₆H₃O]PdMe(Py); 2f : [2‐^tBu‐6‐(Ph₂P=O)‐C₆H₃O]PdMe(Py); 2g : [6‐SiMe₃–2‐(Ph₂P=O)‐C₆H₃S]PdMe(Py)) bearing phosphine (oxide)‐(thio) phenolate ligand have been efficiently synthesized and characterized. The solid‐state structures of complexes 2d , 2f and 2g have been further confirmed by single‐crystal X‐ray diffraction, which revealed a square‐planar geometry of palladium center. In the presence of B(C₆F₅)₃, these complexes can be used as catalysts to polymerize norbornene (NB) with relatively high yields, producing vinyl‐addition polymers. Interestingly, 2a /B(C₆F₅)₃ system catalyzed the polymerization of NB in living polymerization manner at high temperature (polydispersity index 1.07, M_n up to 1.5 × 10⁴). The co‐polymerization of NB and polar monomers was also studied using catalysts 2a and 2f . All the obtained co‐polymers could dissolve in common solvent.     

Experimental and theoretical study of the intramolecular C–H···N and C–H···S hydrogen bonding effects in the 1H and 13C NMR spectra of the 2‐(alkylsulfanyl)‐5‐amino‐1‐vinylpyrroles: a particular state of amine nitrogen

In the ¹H NMR spectra of the 1‐vinylpyrroles with amino‐ and alkylsulfanyl groups in 5 and 2 positions, an extraordinarily large difference between resonance positions of the H_A and H_B terminal methylene protons of the vinyl group is discovered. Also, the one‐bond ¹J(C_β,H_B) coupling constant is surprisingly greater than the ¹J(C_β,H_A) coupling constant in pyrroles under investigation, while in all known cases, there was a reverse relationship between these coupling constants. These spectral anomalies are substantiated by quantum chemical calculations. The calculations show that the amine nitrogen lone pair is removed from the conjugation with the π‐system of the pyrrole ring so that it is directed toward the H_B hydrogen. These factors are favorable to the emergence of the intramolecular C–H_B???N hydrogen bonding in the s‐cis(N) conformation. On the other hand, the spatial proximity of the sulfur to the H_B hydrogen provides an opportunity of the intramolecular C–H_B???S hydrogen bonding in the s‐cis(S) conformation. Presence of the hydrogen bond critical points as well as ring critical point for corresponding chelate ring revealed by a quantum theory of atoms in molecules (QTAIM) approach confirms the existence of the weak intramolecular C–H???N and C–H???S hydrogen bonding. Therefore, an unusual high‐frequency shift of the H_B signal and the increase in the ¹J(C_β,H_B) coupling constant can be explained by the effects of hydrogen bonding. Copyright © 2013 John Wiley & Sons, Ltd.     

6‐Aza‐2′‐deoxy­uridine and N3‐anisoyl‐6‐aza‐2′‐deoxy­uridine

In 2‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐1,2,4‐triazine‐3,5(2H,4H)‐dione (6‐aza‐2′‐deoxy­uridine), C₈H₁₁N₃O₅, (I), the conformation of the glycosylic bond is between anti and high‐anti [χ = −94.0 (3)°], whereas the derivative 2‐(2‐deoxy‐β‐d ‐erythro‐pentofuranosyl)‐N⁴‐(2‐methoxy­benzoyl)‐1,2,4‐triazine‐3,5(2H,4H)‐dione (N³‐anisoyl‐6‐aza‐2′‐deoxy­uridine), C₁₆H₁₇N₃O₇, (II), displays a high‐anti conformation [χ = −86.4 (3)°]. The furanosyl moiety in (I) adopts the S‐type sugar pucker (²T₃), with P = 188.1 (2)° and τ_m = 40.3 (2)°, while the sugar pucker in (II) is N (³T₄), with P = 36.1 (3)° and τ_m = 33.5 (2)°. The crystal structures of (I) and (II) are stabilized by inter­molecular N—H⋯O and O—H⋯O inter­actions.     

Oxazoline chemistry part III. Synthesis and characterisation of [2‐(2′‐anilinyl)‐2‐oxazolines] and some related compounds

The syntheses and characterisation of a series of chiral and achiral 2‐(aminophenyl)‐2‐oxazolines and some related compounds is reported. All of the derivatives have been produced by a one‐step procedure involving the treatment of isatoic anhydride (i.e. [2H]‐3, 1‐benzoxazine‐[1H‐2,4‐dione: 1 ) or its 5‐chloro analogue with a slight excess of appropriate amino‐alcohols. In most cases, anhydrous ZnCl₂ is shown to be an effective Lewis acid catalyst for this reaction at reflux temperature in high boiling aromatic solvents (PhCl or PhMe). Oxazolines have been readily formed using rac‐2‐amino‐1‐butanol, (S)‐phenylglycinol, 2‐methyl‐2‐amino‐1‐propanol and (1S,2R) or (IR,2S)‐cis‐ 1 ‐amino‐2‐indanol; yields range from 85% to 22%. The use of aminoalcohols such as 2‐ethanolamine, (±)‐2‐amino‐1‐phenyl‐1‐propanol or 3‐amino‐1‐propanol (to give the corresponding 4,5‐dihydro‐1,3‐oxazine) results in poor yields. The use of other Lewis acid catalysts (silicic acid, Cd(acac)₂·2H₂O, CuCl₂·2H₂O, InCl₃) or higher temperatures did not improve the yields with these latter two substrates. Benzoxazoles and N‐substituted benzoxazoles can also be obtained in reasonable yields from 1 using 2‐aminophenol (36%) or 2‐amino‐3‐hydroxypyridine (45%).