Direct structure determination using residual dipolar couplings: reaction-site conformation of methionine sulfoxide reductase in solution

Residual dipolar couplings (RDC) from partially aligned molecules provide long-range structural data and are thus particularly well adapted to rapid structure validation or protein fold recognition. Extensive measurements in two alignment media can also provide precise de novo structure from RDC alone. We have applied a novel combination of these approaches to the study of methionine sulfoxide reductase (MsrA) from Erwinia chrysanthemi, a 27 kDa enzyme essential for repairing oxidative stress damage. The tertiary fold was initially validated by comparing backbone RDC to expected values from the crystal structure of the homologous MsrA from Escherichia coli. Good agreement was found throughout the chain, verifying the overall topology of the molecule, with the exception of the catalytically important peptide P196-L202, where strong and systematic RDC violation was observed. No evidence for local differential mobility in this region was detected, implying that the structure of the strand differs in the two molecules. We have therefore applied the de novo approach meccano to determine the conformation of this peptide using only RDC. A single conformation is found that is in agreement with all measured data. The aligned peptide can be docked onto the expected covalence of the rest of the template molecule while respecting its strictly defined relative orientation. In contrast to the structure of MsrA from E. coli, the reactive side chain of Cys200 is oriented toward the interior of the molecule and therefore closer to the catalytic Cys53, obviating the need for previously proposed conformational reorganization prior to formation of this disulfide intermediate. This analysis requires only backbone assignment and uses unambiguously assigned and readily measurable structural data, thereby greatly economizing investigation time compared to established nuclear Overhauser effect- (nOe-) based structure calculation methods.     

De novo determination of protein backbone structure from residual dipolar couplings using Rosetta

As genome-sequencing projects rapidly increase the database of protein sequences, the gap between known sequences and known structures continues to grow exponentially, increasing the demand to accelerate structure determination methods. Residual dipolar couplings (RDCs) are an attractive source of experimental restraints for NMR structure determination, particularly rapid, high-throughput methods, because they yield both local and long-range orientational information and can be easily measured and assigned once the backbone resonances of a protein have been assigned. While very extensive RDC data sets have been used to determine the structure of ubiquitin, it is unclear to what extent such methods will generalize to larger proteins with less complete data sets. Here we incorporate experimental RDC restraints into Rosetta, an ab initio structure prediction method, and demonstrate that the combined algorithm provides a general method for de novo determination of a variety of protein folds from RDC data. Backbone structures for multiple proteins up to approximately 125 residues in length and spanning a range of topological complexities are rapidly and reproducibly generated using data sets that are insufficient in isolation to uniquely determine the protein fold de novo, although ambiguities and errors are observed for proteins with symmetry about an axis of the alignment tensor. The models generated are not high-resolution structures completely defined by experimental data but are sufficiently accurate to accelerate traditional high-resolution NMR structure determination and provide structure-based functional insights.     

Bound-state residual dipolar couplings for rapidly exchanging ligands of His-tagged proteins

The study of bound-state conformations of ligands interacting with proteins is important to the understanding of protein function and the design of drugs that alter function. Traditionally, transferred nuclear Overhauser effects (trNOEs), measured from NMR spectra of ligands in rapid exchange between bound and free states, have been used in these studies, owing to the inherent heavy weighting of bound-state data in the averaged ligand signals. In principle, residual dipolar couplings (RDCs) provide a useful complement to NOE data in that they provide orientational constraints as opposed to distance constraints, but use in ligand-binding applications has been limited due to the absence of heavy weighting of bound-state data. A widely applicable approach to increasing the weighting of bound-state data in averaged RDCs measured on ligands is presented. The approach rests on association of a His-tagged protein with a nickel-chelate-carrying lipid inserted into the lipid bilayer-like alignment media used in the acquisition of RDCs. The approach is validated through the observation of bound-state RDCs for the disaccharide, lactose, bound to the carbohydrate recognition domain of the mammalian lectin, galectin-3.     

On the origin of residual dipolar couplings from denatured proteins

Effects of steric obstruction on random flight chains are examined. Spatial probability distributions are elaborated to calculate residual dipolar couplings and residual chemical shift anisotropy, parameters that are acquired by NMR spectroscopy from solutes dissolved in dilute liquid crystals. Calculations yield chain length and residue position-dependent values in good agreement with simulations to provide understanding of recently acquired data from denatured proteins.     

Spatial structure of peptides determined by residual dipolar couplings analysis

The gated decoupled (13)C NMR spectra of a dipeptide (Glu-Trp) and a tetrapeptide (NAc-Ser-Phe-Val-Gly-OMe) were recorded in D(2)O and in a lyotropic alignment medium (pentaethylene glycol monododecyl ether/n-hexanol). The residual dipolar couplings were extracted as the differences between the observed couplings for the magnetic nuclei dissolved in the latter and former media. Using a computational optimization, the spatial structures of the compounds were calculated starting from their respective low energy conformations obtained on a semiempirical basis. The uniformity of each conformation was confirmed by the solid-state (13)C NMR spectra of powder samples. Differences between the starting structures and final ones, optimized when employing residual dipolar couplings, are discussed.     

Increasing the accuracy of solution NMR structures of membrane proteins by application of residual dipolar couplings. High-resolution structure of outer membrane protein A

The structure determination of membrane proteins is one of the most challenging applications of solution NMR spectroscopy. The paucity of distance information available from the highly deuterated proteins employed requires new approaches in structure determination. Here we demonstrate that significant improvement in the structure accuracy of the membrane protein OmpA can be achieved by refinement with residual dipolar couplings (RDCs). The application of charged polyacrylamide gels allowed us to obtain two alignments and accurately measure numerous heteronuclear dipolar couplings. Furthermore, we have demonstrated that using a large set of RDCs in the refinement can yield a structure with 1 A rms deviation to the backbone of the high-resolution crystal structure. Our simulations with various data sets indicate that dipolar couplings will be critical for obtaining accurate structures of membrane proteins.     

16-fold degeneracy of peptide plane orientations from residual dipolar couplings: analytical treatment and implications for protein structure determination

Residual dipolar couplings (RDCs) measured for internally rigid molecular fragments provide important information about the relative orientations of these fragments. Dependent on the symmetry of the alignment tensor and the symmetry of the molecular fragment, however, there generally exist more than one solution for the fragment orientation consistent with the measured RDCs. Analytical solutions are presented that describe the complete set of orientations of internally rigid fragments that are consistent with multiple dipolar couplings measured in a single alignment medium that is rhombic. For the first time, it is shown that, for a planar fragment such as the peptide plane, there generally exist 16 different solutions with their analytical expressions presented explicitly. The presence of these solutions is shown to be highly relevant for standard structure determination protocols using RDCs to refine molecular structures. In particular, when using standard protein structure refinement with RDCs that were measured in a single alignment medium as constraints, it is found that often more than one of the peptide plane solutions is physically viable; i.e., despite being consistent with measured RDCs, the local backbone structure can be incorrect. On the basis of experimental and simulated examples, it is rationalized why protein structures that are refined against RDCs measured in a single medium can have lower resolution (precision) than one would expect on the basis of the experimental accuracy of the RDCs. Conditions are discussed under which the correct solution can be identified.     

Application of residual dipolar couplings in organic compounds

Residual dipolar couplings (RDCs) induced by anisotropic media are a powerful tool for the structure determination of biomolecules through NMR spectroscopy. Recent advances have proven it to be a valuable tool for determination of the stereochemistry of organic molecules. By simple inspection or order matrix calculations, RDCs provide unambiguous information about the relative configurations or complete stereochemistry of organic compounds.     

Model-free approach to the dynamic interpretation of residual dipolar couplings in globular proteins.

The effects of internal motions on residual dipolar NMR couplings of proteins partially aligned in a liquid-crystalline environment are analyzed using a 10 ns molecular dynamics (MD) computer simulation of ubiquitin. For a set of alignment tensors with different orientations and rhombicities, MD-averaged dipolar couplings are determined and subsequently interpreted for different scenarios in terms of effective alignment tensors, average orientations of dipolar vectors, and intramolecular reorientational vector distributions. Analytical relationships are derived that reflect similarities and differences between motional scaling of dipolar couplings and scaling of dipolar relaxation data (NMR order parameters). Application of the self-consistent procedure presented here to dipolar coupling measurements of biomolecules aligned in different liquid-crystalline media should allow one to extract in a "model-free" way average orientations of dipolar vectors and specific aspects of their motions.     

Measurements of side-chain 13C-13C residual dipolar couplings in uniformly deuterated proteins

13C-only spectroscopy was used to measure multiple residual (13)C-(13)C dipolar couplings (RDCs) in uniformly deuterated and (13)C-labeled proteins. We demonstrate that (13)C-start and (13)C-observe spectra can be routinely used to measure an extensive set of the side-chain residual (13)C-(13)C dipolar couplings upon partial alignment of human ubiquitin in the presence of bacteriophages Pf1. We establish that, among different broadband polarization transfer schemes, the FLOPSY family can be used to exchange magnetization between a J coupled network of spins while largely decoupling dipolar interactions between these spins. An excellent correlation between measured RDCs and the 3D structure of the protein was observed, indicating a potential use of the (13)C-(13)C RDCs in the structure determination of perdeuterated proteins.     

A novel method for the determination of stereochemistry in six-membered chairlike rings using residual dipolar couplings

A novel method for the determination of the relative stereochemistry of six-membered chairlike ring molecules by residual dipolar couplings is presented. C-H residual dipolar couplings were used to investigate the relative stereochemistry of 4,6-O-ethylidene-d-glucopyranose. For this and similar systems it is not necessary to acquire redundant dipolar couplings and to calculate the orientation order tensor. The presented methodology is a paradigmatic leap for the determination of the relative stereochemistry or remote stereochemistry in this kind of fused ring system. Residual dipolar coupling data were collected by 1D and 2D direct-measurement heteronuclear multiple quantum coherence (HMQC) spectroscopy. It was demonstrated that direct measurement of HMQC was quick and accurate for small molecules at natural abundance.     

An alternative method for pucker determination in carbohydrates from residual dipolar couplings: a solution NMR study of the fructofuranosyl ring of sucrose

A simple solution NMR method is presented for pucker determination of five-membered rings using only residual dipolar couplings obtained in a single liquid crystalline medium, DMPC/DHPC bicelles (DMPC = dimyristoylphosphatidylcholine; DHPC = dihexanoylphosphatidylcholine). The method was applied to determine the pucker of the fructofuranosyl ring of sucrose. The results indicate a fructofuranosyl pucker phase in the 20 degrees - 70 degrees range. The pucker phases are in agreement with those from previous NMR and optical spectroscopic studies and, importantly, do not rely on empirically parametrized Karplus curves. Furthermore, the analysis implies more than one stable pucker phase and rapid ring interconversion in this range. The present results suggest that using residual dipolar couplings alone can reveal multiple conformations present in solution. Hence, when a sufficient number of residual dipolar coupling constants is measured, the outcome is a robust, reliable, and independent route for determining carbohydrate and nucleic acid structure by NMR spectroscopy.     

Charged gels as orienting media for measurement of residual dipolar couplings in soluble and integral membrane proteins

Measurement of residual dipolar couplings for membrane proteins will dramatically improve the quality of the structures obtainable by solution NMR spectroscopy. While there has been some success in achieving alignment of membrane-bound peptides, there has been very limited success in achieving alignment for functional membrane proteins. Herein, we demonstrate that charged polyacrylamide-based copolymers are suitable for obtaining weak alignment of membrane proteins reconstituted in detergent micelles. Varying the copolymer compositions, we prepared positively, zwitterionic, and negatively charged gels that are very stable at low concentration and can be used for obtaining weak alignment by compression in an NMR tube. Application of this method is demonstrated for the integral membrane protein OmpA in DPC micelles.