聚苯乙烯-丙烯酸丁酯新型固相微萃取吸附质的研究与应用

合成了苯乙烯-丙烯酸丁酯共聚物,研究了此聚合物作为固相微萃取吸附质的性能。用顶空萃取法对水中低级芳烃化合物进行了萃取实验,考察了此高聚物涂层的热稳定性及单体比例与萃取率的关系。将自制涂层与商品聚二甲基硅氧烷(PDMS)涂层对低级芳烃化合物的萃取效果进行了比较。     

聚苯乙烯-丙烯酸丁酯固相微萃取新型吸附质的研究与应用

实验以丙烯酸丁酯和苯乙烯为单体 ,过氧化苯甲酰为引发剂 ,醋酸丁酯和甲苯作混合溶剂 ,溶剂用量与单体混合物的体积相同。采用溶液聚合的方法合成了一种新型固相微萃取吸附质 (苯乙烯 -丙烯酸丁酯共聚物 ) ,研究了此聚合物作为固相微萃取吸附质的性能。用顶空萃取法对水中低级芳烃化合物进行了萃取实验 ,考察了此高聚物涂层的热稳定性及单体比例与萃取率的关系。将自制涂层与PDMS涂层对低级芳烃化合物萃取量进行了比较 ,反映了苯乙烯 丙烯酸丁酯聚合物涂层的特点。     

溶胶-凝胶固相微萃取涂层及其在农药残留分析中的应用

利用溶胶-凝胶(sol-gel)技术制备固相微萃取(SPME)涂层材料.通过硅醇盐前驱体与涂层聚合物羟基硅油(OH-TSO)的水解共聚的方法,成功地制备了聚二甲基硅氧烷sol-gel 涂层的SPME 萃取头,并以农药的混合标准水溶液为研究对象,用直接-固相微萃取-气相色谱法(GC)对涂层的性能进行考察,制成的萃取头适用于多种农药残留的萃取分离分析.     

硅氧烷-聚氨酯共聚物的制备及其作为固相微萃取头涂层用于分离水中芳香族化合物

合成了硅氧烷-聚氨酯共聚物,并采用红外光谱、扫描电子显微镜和能谱仪对该共聚物进行了表征。将其用于固相微萃取用石英纤维的表面涂层并制备了萃取头。将此固相微萃取装置的萃取头萃取和分离顶空样瓶水样中的芳香化合物并引入仪器进行色谱分析。结果表明:用共聚物涂层的石英纤维制成的萃取头的最高使用温度为260℃,涂层表面硅元素分布均匀。苯、氯苯、硝基苯的质量浓度均在50.0μg·L~(-1)范围以内与其色谱峰峰高呈线性关系,方法的检出限(3S/N)依次为0.432,0.756,0.511μg·L~(-1)。     

溶胶-凝胶富勒烯固相微萃取-气相色谱法测定塑料水浸泡液中多种邻苯二甲酸二酯

利用新型溶胶-凝胶富勒烯涂层,结合顶空固相微萃取-气相色谱法-FID检测,对PVC塑料制品在水溶液浸泡液中的12种邻苯二甲酸二酯进行了分析和测定,其检出限为0.097～3.646 μg/L;回收率为87.9%～107%;RSD<8%.对12种邻苯二甲酸二酯类增塑剂的固相微萃取条件和色谱条件进行了优化,并与商用固相微萃取聚二甲基硅氧烷(PDMS)探头的性能进行了比较.本方法应用于PVC玩具及PVC餐垫样品的分析,结果令人满意.     

有序介孔碳涂层修饰固相微萃取纤维的制备及吸附性能研究

以酚醛树脂为碳源,三嵌段共聚物F127为软模板剂,制备了具有有序介孔碳涂层的固相微萃取纤维。氮气吸脱附表征表明,粉末介孔碳比表面积929 m2/g,平均孔径5.1 nm。利用气相色谱-飞行时间质谱联用技术,介孔碳涂层修饰的固相微萃取纤维对多种有机物萃取结果表明纤维对苯系物有较佳的萃取性能。介孔碳涂层是一种具有应用前景的新型固相微萃取涂层。     

苯丙共聚物-聚硅氧烷复合固相微萃取涂层的制备及性能研究

合成了苯乙烯-丙烯酸乙酯共聚物,以此聚合物与甲基聚硅氧烷色谱固定液混合作为固相微萃取头涂层。通过热分析手段考察了该涂层的热稳定性,涂层使用温度可达280℃。使用微量进样器和不锈钢毛细管,自制了SPME装置。使用该涂层萃取分析了水中氯苯系化合物,各标准样品质量浓度在0—20μg／L内与色谱峰面积呈良好线性关系（r=0．9674—0．9934）,检出限为0．28—0．64ng／L,相对标准偏差为5．4％-7．7％,加标回收率为91％-99％。将自制涂层与商品涂层（PDMS、PA）进行了比较,结果表明苯丙聚合物-甲基聚硅氧烷复合涂层对氯苯系化合物具有优良的吸附特性。在固相微萃取研究和应用中,提供了新的吸附物质和色谱固定液与石英纤维结合的新途径。     

固相微萃取涂层制备方法研究进展

涂层是固相微萃取技术的核心,近年来出现的各种新型涂层材料和制备技术,进一步拓宽了固相微萃取技术的应用范围.该文介绍了各种新型固相微萃取介质的发展,并综述了各种新型固相微萃取涂层的制备方法,包括直接制备、溶胶-凝胶技术、化学键合与聚合、分子印迹技术、树脂固载技术、电化学沉积等.     

顶空固相微萃取-气相色谱-质谱联用快速分析八角茴香中风味物质

采用顶空固相微萃取与气相色谱-质谱联用技术,对八角茴香中风味物质进行了分析。选用自制聚丙烯酸树脂涂层,对样品量、萃取时间、萃取温度、解吸时间等参数进行了优化,结果表明0．10g样品在60℃水浴中顶空萃取40min,250℃下解吸2min达到最佳条件。比较了顶空固相微萃取与传统水蒸气蒸馏两种前处理方法,分析结果非常相似。该方法可用于快速分析八角茴香中的风味物质。     

固相微萃取涂层及其形貌特征研究

采用物理涂渍、溶胶-凝胶技术(sol-gel)制备了固相微萃取(SPME)固相涂层：),γ-Al2O3涂层、聚丙烯酸树脂涂层、聚酰亚胺-二氧化硅溶胶凝胶涂层、聚酰亚胺-二氧化钛涂层。通过扫描电镜显示涂层表面形貌,并比较了萃取容量与涂层形貌间的关系.证明涂层的微观形态结构对涂层性能具有一定的影响,可以通过微观形态分析,了解不同微观结构对宏观性质的影响。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.