In situ scanning FTIR microscopy and IR imaging of Pt electrode surface towards CO adsorption

In situ scanning FTIR microscopy was built up for the first time in the present work, which consists of an FTIR apparatus, an IR microscope, an X-Y mapping stage, and the specially designed electrochemical IR cell and computer software. It has been demonstrated that this new space-resolvdin situ IR technique can be used to study vibration properties of micro-area, and to perform IR imaging of electrode surface. The chemical image obtained using this technique for CO adsorption on Pt electrode illustrated, at a space-resolution of 10^-2 cm, the inhomogeneity and the distribu-tion of reactivity of micro-area of electrode surface. Project supported by the National Natural Science Foundation of China (Grant No. 29525307).     

In situ scanning FTIR microscopy and IR imaging of Pt electrode surface towards CO adsorption

In situ scanning FTIR microscopy was built up for the first time in the present work, which consists of an FTIR apparatus, an IR microscope, an X-Y mapping stage, and the specially designed electrochemical IR cell and computer software. It has been demonstrated that this new space-resolvd in situ IR technique can be used to study vibration properties of micro-area, and to perform IR imaging of electrode surface. The chemical image obtained using this technique fur CO adsorption on Pt electrode illustrated, at a space-resolution of 10~(-2) cm, the inhomogeneity and the distribution of reactivity of micro-area of electrode surface.     

In-situ IR spectroscopy with a gas diffusion cell CO adsorption and oxidation on Pt

A gas diffusion cell allowing ready access of reactant to the electrode through the thin electrolyte layer has been used to obtain in-situ infra-red spectra from adsorbed CO on Pt under conditions of sustained reaction. The potential dependence of CO oxidation and adsorption and the inhibition of CO oxidation by adsorbed CO have been investigated.     

In situ surface-enhanced IR absorption spectroscopy on CO adducts of iron protoporphyrin IX self-assembled on a Au electrode

The surface coordination chemistry of carbon monoxide with the reduced form (Fe(II)PP) of iron(III) protoporphyrin IX (Fe(III)PP) monolayer self-assembled on a Au electrode in 0.1 M HClO4 was studied for the first time by using in situ ATR-surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS). Both mono- and biscarbonyl adducts [simplified as Fe(II)(CO)PP and Fe(II)(CO)2PP, respectively] were detected, depending on the history of potential control. Initially, the Fe(II)(CO)PP predominates, and the intermediate transition potential for the conversion of Fe(II)(CO)PP to Fe(III)PP and CO was spectrally determined to be ca. 0.09 V (vs SCE). The ratio of Fe(II)(CO)2PP and Fe(II)(CO)PP increases after a potential excursion to a sufficiently positive value. Fe(II)(CO)2PP is much more stable against its electro-oxidation to Fe(III)PP than its counterpart Fe(II)(CO)PP with increasing potential. The observed change of coordination properties may be ascribed to an irreversible structural reorganization of the FePP adlayer caused by the potential excursion.     

In situ surface-enhanced Raman spectroscopic studies of nafion adsorption on Au and Pt electrodes

Understanding interactions between Nafion (perfluorosulfonic acid) and Pt catalysts is important for the development and deployment of proton exchange membrane fuel cells. However, study of such interactions is challenging and Nafion/Pt interfacial structure remains elusive. In this study, adsorption of Nafion ionomer on Au and Pt surfaces was investigated for the first time by in situ surface-enhanced Raman spectroscopy. The study is made possible by the use of uniform SiO(2)@Au core-shell particle arrays which provides very strong enhancement of Raman scattering. The high surface sensitivity offered by this approach yields insightful information on interfacial Nafion structure. Through spectral comparison of several model compounds, vibration assignments of SERS bands were made. The SER spectra suggest the direct interaction of sulfonate group with the metal surfaces, in accord with cyclic voltammetric results. Comparison of present SERS results with previous IR spectra was briefly made.     

In-situ X-ray absorption spectroscopy study of Pt and Ru chemistry during methanol electrooxidation

Methanol electrooxidation in a 0.5 M sulfuric acid electrolyte containing 1.0 M CH3OH was studied on 30% Pt/carbon and 30% PtRu/carbon (Pt/Ru = 1:1) catalysts using X-ray absorption spectroscopy (XAS). Absorption by Pt and Ru was measured at constant photon energy in the near edge region during linear potential sweeps of 10-50 mV/s between 0.01 and 1.36 V vs rhe. The absorption results were used to follow Pt and Ru oxidation and reduction under transient conditions as well as to monitor Ru dissolution. Both catalysts exhibited higher activity for methanol oxidation at high potential following multiple potential cycles. Correlation of XAS data with the potential sweeps indicates that Pt catalysts lose activity at high potentials due to Pt oxidation. The addition of Ru to Pt accelerates the rate of methanol oxidation at all potentials. Ru is more readily oxidized than Pt, but unlike Pt, its oxidation does not result in a decrease in catalytic activity. PtRu/carbon catalysts underwent significant changes during potential cycling due to Ru loss. Similar current density vs potential results were obtained using the same PtRu/carbon catalyst at the same loading in a membrane electrode assembly half cell with only a Nafion (DuPont) solid electrolyte. The results are interpreted in terms of a bifunctional catalyst mechanism in which Pt surface sites serve to chemisorb and dissociate methanol to protons and carbon monoxide, while Ru surface sites activate water and accelerate the oxidation of the chemisorbed CO intermediate. PtRu/carbon catalysts maintain their activity at very high potentials, which is attributed to the ability of the added Ru to keep Pt present in a reduced state, a necessary requirement for methanol chemisorption and dissociation.     

In situ studies of butyronitrile adsorption and hydrogenation on Pt/Al2O3 using attenuated total reflection infrared spectroscopy

The adsorption and hydrogenation of butyronitrile (BN) in hexane on a 5% Pt/Al2O3 catalyst has been studied using in situ attenuated total reflection infrared (ATR-IR) spectroscopy. ATR-IR measurements were conducted on thin ( approximately 10 mum) films of catalyst deposited on Ge wave guides. Multivariate analysis involving classical lease-squares (CLS) and partial least-squares (PLS) modeling was used to aid in the interpretation of the spectroscopic data. During the adsorption of BN over a concentration range from 4 to 40 mM in hexane, no clear evidence for adsorbed N-bound end-on species could be detected. However, a feature at approximately 1635-1640 cm-1 indicated the presence of an adsorbed imine species, with the C=N group existing in a tilted configuration involving a strong degree of pi interaction with the surface. This assignment is bolstered by the detection of N-H stretching bands that are consistent with imine vibrations. This imine-type intermediate is very prominent and shows transient behavior in the presence of solution-phase hydrogen, suggesting that, once formed, it can be converted into amine products that adsorb on the catalyst surface. Evidence for amine formation was observed in the form of N-H stretching and NH2 bending vibrations, with assignments confirmed through comparison studies of butylamine adsorption under identical conditions. Comparisons between Pt/Al2O3 and Al2O3 suggest that there may be some adsorption of these amines on the support surface. The mechanistic implications with regard to heterogeneous nitrile hydrogenation on transition metals under mild conditions are briefly discussed in light of these findings.     

In situ surface-enhanced infrared absorption spectroscopy for the analysis of the adsorption and desorption process of Au nanoparticles on the SiO2/Si surface

The adsorption and desorption of Au nanoparticles (AuNP) in colloidal D2O suspension on the (3-aminopropyl)triethoxysilane treated SiO2/Si surface was investigated by in situ attenuated total reflection surface enhanced infrared absorption (ATR-SEIRA) spectroscopy with a liquid flow cell. With increasing surface density of AuNP, the absorption of the vibrational modes of D2O and of the citrate molecules covering the AuNP increases due to SEIRA. Repulsive electrostatic Coulomb forces between the AuNP lead to the saturation of the AuNP surface density at submonolayer coverage. We show that the adsorption kinetics can be investigated by monitoring in situ the molecular vibrational modes of D2O and the citrate molecules. Furthermore, we clarify that the adsorption process can be described very well by a diffusion-limited first-order Langmuir kinetics model. When exposing a saturated AuNP submonolayer to 2-aminoethanethiol (AET)/D2O solution, the AuNP are removed from the surface and the IR absorption of the D2O vibrational modes become weaker again. Taking into account the time dependencies of the OD and the CH peaks, we propose a microscopic model where the AET molecules quickly adsorb on the AuNP by replacing most of the precovering citrate molecules exposed to the AET solution. As this takes place, the AuNP agglomerate-as we could detect with scanning electron microscopy-and are finally removed from the surface.     

Determination of O and OH adsorption sites and coverage in situ on Pt electrodes from Pt L(2,3) X-ray absorption spectroscopy

The adsorption of atomic oxygen and hydroxide on a platinum electrode in 0.1 M HClO4 or H2SO4 electrolytes was studied in situ with Pt L(2,3) X-ray absorption spectroscopy (EXAFS and XANES). The Pt L3 edge absorption data, mu, were collected at room temperature in transmission mode on beamline X-11A at the National Synchrotron Light Source using a custom built cell. The Pt electrode was formed of highly dispersed 1.5-3 nm particles supported on carbon. A novel difference procedure (delta mu = mu(O[H]/Pt) - mu(Pt)) utilizing the L3 XANES spectra at different applied voltages was used to isolate the effects of O[H] (O or OH) adsorption in the XANES spectra. The Deltamu results are compared with results obtained from real-space full-multiple scattering calculations utilizing the FEFF8 code on model clusters. The experimental results, when compared with theoretical calculations, allow the adsorption site to be identified. At low coverages OH adsorbs primarily in 1-fold coordinated atop sites. As the coverage increases, O binds in the bridge/fcc sites, and at still higher coverages above 1.05 V RHE, O adsorbs into a higher coordinated n-fold or subsurface site, which is thought to be the result of Pt-O site exchange and oxide formation. These results are similar to those found in the gas phase. Direct specific adsorption of bisulfate anions in H2SO4 is spectroscopically seen in both the EXAFS and XANES data and is seen to impede oxygen adsorption consistent with previous reports.     

In situ Fourier-transform infrared spectroscopy studies of inorganic ions adsorption on metal oxides and hydroxides

In this work, the studies describing the use of attenuated total reflection-infrared spectroscopy to obtain information on the sorption mechanism of inorganic ions on metal oxy-hydroxides are reviewed. ATR-IR is amongst the rare techniques which allow to analyze the sorption phenomena in situ and led to several results about the speciation of sorbed anions (sulfate, carbonate, phosphate, perchlorate, ...) or ternary inorganic complexes since it is able to distinguish outer-sphere and inner-sphere complexes. The principles of this method are summarized, and the experimental protocols, the results and the limitations are elaborated. The sample deposition method, initially based on a paste or a concentrated suspension, has evolved towards the coating of the ATR crystal by a colloid layer, increasing the sensibility and the reproducibility of the measurements. Observed absorption frequencies of ions sorbed on metal oxy-hydroxides (goethite, hematite, alumina, silica, TiO2, ...) are reported to help the identification of peaks in new experimental works. This method, characterized by an in situ analysis performed with a special cell used in a widespread instrumentation (IR spectrometer), is very recent but its advantages suitable for the current problems in the sorption field should help its rapid development for the next years.     

原位拉曼光谱与X射线吸收光谱研究能源转换电催化反应

近年来,水分解、氧气/二氧化碳还原等电化学能源转换技术为解决全球能源短缺及环境问题提供了新的思路和方向.然而,对这些能源转换技术的反应机理及其催化剂的活性位点目前仍缺乏深刻的认识和理解,这限制了高效、稳定催化剂的开发,以致阻碍该类电化学技术的进一步发展.原位光谱技术的快速发展为解决上述问题提供了坚实的基础,其中拉曼光谱...     

Oxidation of adsorbed CO on Pt(111) in CO-saturated perchloric acid aqueous solutions: simultaneous in situ time-resolved reflectance spectroscopy and second harmonic generation studies

Simultaneous normalized differential reflectance spectroscopy (DeltaR/R) and second harmonic generation (SHG) has been employed to follow, independently, OH and adsorbed CO (CO(ads)) on a single Pt(111) microfacet in CO-saturated aqueous perchloric acidic solutions during voltammetric cycles, leading to the oxidation of CO(ads) and subsequent readsorption of CO on the surface. The results obtained are consistent with the disruption of the radical19 x radical19R19.1 degrees phase just prior to the oxidation of adsorbed CO.     

In situ IR spectroscopy for developing catalysts and catalytic processes

The role of in situ IR spectroscopy to characterize the surface of solid catalysts and to assess sorbed reactants and products together with important intermediates of the catalyzed reactions is outlined. Strategies are discussed using a complex case study, the synthesis of alkylamines. The experimental realization asks for the ability to record IR spectra in situ at elevated temperatures and pressures without influencing the kinetics of the reaction. On the advent of radically new methods of catalyst development, it is shown how IR spectroscopy will significantly contribute to catalyst and process development.     

In situ Raman spectroscopy studies for electrochemical CO2 reduction over Cu catalysts

1. Download : Download high-res image (221KB)
2. Download : Download full-size image

     

Adsorption and co-adsorption of ethylene and carbon monoxide on silica-supported monodisperse Pt nanoparticles: volumetric adsorption and infrared spectroscopy studies

The adsorption of carbon monoxide and ethylene, and their sequential adsorption, was studied over a series of Pt/SBA-15 catalysts with monodisperse particle sizes ranging from 1.7 to 7.1 nm by diffuse-reflectance infrared spectroscopy and chemisorption. Gas adsorption was dependent on the Pt particle size, temperature, and sequence of gas exposure. Adsorption of CO at room temperature on Pt/SBA-15 gives rise to a spectroscopic feature assigned to the C-O stretch: nu(CO) = 2075 cm-1 (1.9 nm); 2079 cm-1 (2.9 nm); 2082 cm-1 (3.6 nm); and 2090 cm-1 (7.1 nm). The intensity of the signal decreased in a sigmoidal fashion with increasing temperature, thereby providing semiquantitative surface coverage information. Adsorption of ethylene on Pt/SBA-15 gave rise to spectroscopic features at approximately 1340, approximately 1420, and approximately 1500 cm-1 assigned to ethylidyne, di-sigma-bonded ethylene, and pi-bonded ethylene, respectively. The ratio of these surface species is highly dependent on the Pt particle size. At room temperature, Pt particles stabilize ethylidyne as well as di-sigma- and pi-bonded ethylene; however, ethylidyne predominated on the surfaces of larger particles. Ethylidyne was the only identifiable species at 403 K, with its formation being more facile on larger particles. Co-adsorption experiments reveal that the composition of the surface layer is dependent on the order of exposure to gases. Exposure of a C2H4-covered Pt surface to CO resulted in an approximately 50% decrease in chemisorbed CO compared to a fresh Pt surface. The nu(CO) appeared at 2050 cm-1 on Pt/SBA-15 pretreated with C2H4 at room temperature. The di-sigma-bonded and pi-bonded species are the most susceptible to displacement from the surface by CO. The formation of ethylidyne appeared to be less sensitive to the presence of adsorbed carbon monoxide, especially on larger particles. Upon exposure of C2H4 to a CO-covered Pt surface, little irreversible uptake occurred due to nearly 100% site blocking. These results demonstrate that carbon monoxide competes directly with ethylene for surface sites, which will have direct implications on the poisoning of the heterogeneously catalyzed conversion of hydrocarbons.     

In situ diffuse reflectance FT-IR studies of TiO2 and Pt/TiO2 in photo-oxidation of benzene and ethylene

In situ diffuse reflectance FT-IR measurements were carried out to investigate the formation and decomposition behavior of by-product compounds on TiO₂ and Pt/TiO₂ catalyst surfaces during the photo-oxidation of benzene and ethylene. In the benzene photo-oxidation ([benzene]=100 ppm) without water vapor, TiO₂ catalyst was readily covered with oxygen-containing by-product compounds, which were decomposed by photoirradiation in the presence of water vapor ([H₂O]=0.17%) with an induction period. Pt deposition slightly increased the rate for their decomposition. In the ethylene photo-oxidation ([ethylene]=400 ppm) without water vapor, oxygen-containing by-product compounds were also formed, which were readily decomposed by photoirradiation in the presence of water vapor without induction period. Pt deposition on TiO₂ surface had no significant effect on the photo-oxidation processes.     

The effect of the particle size on the kinetics of CO electrooxidation on high surface area Pt catalysts

Using high-resolution transmission electron microscopy (TEM), infrared reflection-absorption spectroscopy (IRAS), and electrochemical (EC) measurements, platinum nanoparticles ranging in size from 1 to 30 nm are characterized and their catalytic activity for CO electrooxidation is evaluated. TEM analysis reveals that Pt crystallites are not perfect cubooctahedrons, and that large particles have "rougher" surfaces than small particles, which have some fairly smooth (111) facets. The importance of "defect" sites for the catalytic properties of nanoparticles is probed in IRAS experiments by monitoring how the vibrational frequencies of atop CO (nu(CO)) as well as the concomitant development of dissolved CO(2) are affected by the number of defects on the Pt nanoparticles. It is found that defects play a significant role in CO "clustering"on nanoparticles, causing CO to decrease/increase in local coverage, which yields to anomalous redshift/blueshift nu(CO) frequency deviations from the normal Stark-tuning behavior. The observed deviations are accompanied by CO(2) production, which increases by increasing the number of defects on the nanoparticles, that is, 1 < or = 2 < 5 < 30 nm. We suggest that the catalytic activity for CO adlayer oxidation is predominantly influenced by the ability of the surface to dissociate water and to form OH(ad) on defect sites rather than by CO energetics. These results are complemented by chronoamperometric and rotating disk electrode (RDE) data. In contrast to CO stripping experiments, we found that in the backsweep of CO bulk oxidation, the activity increases with decreasing particle size, that is, with increasing oxophilicity of the particles.     

A site-selective in situ study of CO adsorption and desorption on Pt(355)

Using time-dependent high-resolution x-ray photoelectron spectroscopy at BESSY II, the adsorption and desorption processes of CO on stepped Pt(355) = Pt[5(111) x (111)] were investigated. From a quantitative analysis of C 1s data, the distribution of CO on the various adsorption sites can be determined continuously during adsorption and desorption. These unique data show that the terrace sites are only occupied when the step sites are almost saturated, even at temperatures as low as 130 K. The coverage-dependent occupation of on-top and bridge adsorption sites on the (111) terraces of Pt(355) is found to differ from that on Pt(111), which is attributed to the finite width of the terraces and changes in adsorbate-adsorbate interactions. In particular, no long-range order of the adsorbate layer could be observed by low-energy electron diffraction. Further details are derived from sticking coefficient measurements using the method devised by King and Wells [Proc. R. Soc. London, Ser. A 339, 245 (1974)] and temperature-programmed desorption. The CO saturation coverage is found to be slightly smaller on the stepped surface as compared to that on Pt(111). The initial sticking coefficient has the same high value of 0.91 for both surfaces.     

In situ Fourier transform IR spectroscopy and variable-temperature wide-angle X-ray diffraction studies on the crystalline transformation of melt-crystallized nylon 12 12

 The crystalline transformation in nylon 12 12 was monitored by variable-temperature wide-angle X-ray diffraction during heating, isothermal and cooling processes. It could be found that the α phase of the sample transforms into a γ phase at about 130 °C if the sample is heated from room temperature to a high temperature, which is the so-called Brill transition temperature. In addition, nylon 12 12 was found to crystallize into the γ phase when isothermally crystallized at high temperature from the melt. Upon further cooling from the crystallization temperature to room temperature, the reverse transition from the γ phase to the α phase can be detected. Furthermore, in situ Fourier transform IR spectroscopy was also used to study the Brill transition of nylon 12 12 samples on both heating and cooling. It is interesting that the hydrogen-bond strength in nylons decreases dramatically and that some Brill bands of nylon 12 12 disappear abruptly during the Brill transition on heating. Received: 3 April 2001 Accepted: 28 July 2001     

In situ infrared spectroelectrochemical studies on adsorption and oxidation of nucleic acids at glassy carbon electrode

The adsorption and oxidation of yeast RNA and herring sperm DNA (HS DNA) at glass carbon (GC) electrode are studied by differential pulse voltammetry (DPV) and in situ FTIR spectroelectrochemistry. Two oxidation peaks of yeast RNA are obtained by DPV, whose peak potentials shift negatively with increasing pH. The peak currents decrease gradually in successive scans and no corresponding reduction peaks occur, thus indicating that the oxidation process of yeast RNA is completely irreversible. The IR bands in the 1200-1800 cm(-1) range, attributed to the stretching and ring vibrations of nucleic acid bases, show the main spectral changes when the potential is shifted positively, which gives evidence that the oxidation process takes place in the base residues. The oxidation process of HS DNA is similar to that of yeast RNA. The results both from DPV and in situ FTIR spectroelectrochemistry confirm that the guanine and adenine residues can be oxidized at the electrode surface, which is consistent with the oxidation mechanism of nucleic acids proposed previously.