等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

NAD(P)H辅酶模型物结构与反应性关系的研究──3-位酰基的电子效应

合成了一系列3酰胺基氮取代的NAD(P)H模型物,测定了其与5硝基异喹啉正离子的二级反应速率常数,并与模型物的氧化还原电势进行了比较.实验结果表明,模型物3位酰基氧一方面可离域二氢吡啶环上N的电子;另一方面负电性的3位酰基氧在反应过渡态中又可引起分子内和分子间的两种静电作用;3位酰基的电子效应对模型物动力学反应性的影响是这两种效应综合作用的结果.     

Study on the Cracking Mechanism of 1,1,2-Trichloro-1,2,2-trimethyldisilane Catalyzed by Aluminum Chloride

The cracking mechanism of 1,1,2-trichloro-l,2,2-trimethyldisilane catalyzed by aluminum chloride is investigated by DFT and MP2 methods. The reactants decompose in two ways, which are competing response. The reaction pathways are both by three steps. And the two reaction channels were both exothermic reaction. The heat of the overall reaction was –293.372 kJ·mol-1. The rate determining steps are the third and first steps, respectively. The Standard Gibbs Free Energy Change is the same, –297.55 kJ·mol-1. The Standard Equilibrium Constant is 1.354 × 1052. The theoretical productivity is high under normal temperature and pressure. The theoretical results agreed well with the experimental data.     

N-异丙基丙烯酰胺/丙烯酸十八酯共聚物水溶液胶束及相分离行为研究

合成了N异丙基丙烯酰胺(NIPAM)和丙烯酸十八酯(ODA)的共聚物.利用荧光探针和滴重法研究了NIPAMODA共聚物在水溶液中的胶束形成过程.同时还利用荧光探针法研究了共聚物水溶液在温度升高时出现的LCST(LowerCriticalSolutionTemperature)现象,表明该高分子在温度升高时存在着相分离现象.利用LB技术测量共聚物不溶单分子膜的PA曲线,发现随着温度升高共聚物的单分子膜越来越凝聚的反常现象,这从另一个侧面证实了共聚物NIPAMODA的相分离行为,并对此现象作了讨论.     

小波包分析用于重叠分析化学信号的处理

对小波包分析的算法进行了改进,并将此算法成功地应用于多组分重叠色谱信号的解析.结果表明,本文提出的算法解决了MRSD算法的不足,更适合处理分析化学信号,用于重叠信号的解析时不需重构(逆变换),简化了数据处理步骤,加快了数据解析速度,具有较强的解析能力.对于重叠色谱信号的解析,小波包分析比小波分析具有更强的解析能力.     

离聚体水基微乳液化的研究——聚苯乙烯离聚体微乳化过程相反转的表征

以乙酰磺酸为磺化剂制备磺化度为３～１５ｍｏｌ％的磺化聚苯乙烯（ＳＰＳ）并中和成盐．在一定的温度和搅拌速率下，加水将ＳＰＳ乳化成水包油的稳定水基微乳液．用乳化过程中体系电导率和粘度的变化表征了乳化相反转过程．研究了溶剂的极性和离子含量对聚苯乙烯离聚体溶液可乳化性和乳化过程及乳液稳定性的影响．     

茚三酮与赖氨酸荧光反应的研究

茚三酮与赖氨酸的显色反应已广泛用于各种样品的测定,但高灵敏的氨基酸荧光测定法的研究还很不够。尽管茚三酮与某些氨基酸的荧光反应已有报道,但反应条件苛刻,反应时间长达60～120min,对赖氨酸的专一测定法尚未见报道^[1~3]。     

2.45GHz下常用有机试剂复介电常数的测量与研究

1986年加拿大的R．Gedye和R．J．Giguere等发现了微波可以显著加快有机合成,他们发现用微波辐射可使反应速率和产率有不同程度的提高。由于微波作用机理的特殊性,微波化学对很多化学领域带来了冲击。但是,微波与化学反应体系之间相互作用的一些重大问题还未得到解决,如微波加热过程中化学反应系统的非线性反射、非均匀加热等。解决这类问题,首先必须了解化学反应过程中混合物的电学性质与磁学性质,而物质的宏观电学和磁学性质都用其介电常数和磁导率来描述。对于大部分是非磁性材料的有机试剂,微波与反应体系相互作用的特性集中体现在体系的等效复介电常数上。了解各种常用试剂的复介电常数,可以进一步了解各种化学试剂对微波的吸收和反射的情况。而很多试剂的复介电常数无法从现有文献中得到。本文利用谐振腔微扰法测定了在2．45GHz室温下各类常用有机试剂的复介电常数,结果显示：醇类试剂复介电常数实部与虚部都较大;酮类试剂复介电常数实部相对较大,而虚部较小;酸类试剂复介电常数实部和虚部都较小;烷烃和苯类试剂实部,虚部更小。同时,随着碳链增加,所有试剂的复介电常数的实部与虚部均有下降趋势。这些测试和分析结果将为微波辅助有机合成提供了有益参考。     

Highly reusable chitosan-stabilized Fe-ZnO immobilized onto fiberglass cloth and the photocatalytic degradation properties in batch and loop reactors

The new design of the photocatalytic reactor is crucial to study for improving compatibility and scaling up the operation. A compatible loop photocatalytic reactor has been designed and used for rhodamine B decomposition. The photocatalysts were either ZnO or Fe-ZnO immobilized onto fiberglass cloth. The ZnO catalyst exhibited high crystallinity with or without Fe as the dopant. The crystallite size increased with the presence of Fe in the lattices. Most of the crystal parameters matched the standard ZnO data, and the cluster size was comparable to most reported studies. Diffuse Reflectance Spectroscopy (DRS) analysis confirmed the photon absorption shifted to the visible light range. The Fe dopant decreased the ZnO bandgap, and SEM-EDS confirmed the catalysts adhered to the fiberglass surface. The volume, thickness of the substrate solution, and reaction temperature influenced the photocatalytic-degradation rate. The photocatalytic degradation rate was higher under sunlight than ultraviolet irradiation. The reaction rate was lower in the batch reactor than in the loop reactor. The photocatalytic reaction almost completely mineralized RhB and changed the red solution to colorless. The immobilized photocatalyst has been reused more than 50 times without significantly decreasing the catalytic activity.     

有机锡化合物为中性载体的高选择性硫氰酸根离子电极

使用硫氰化银与硫化银作膜活性物质的固态硫氰酸根离子选择电极,由于受卤素离子如Cl^-、Br^-和I^-干扰很大而限制了应用.以钴(Ⅲ)卟啉或维生素B₁₂衍生物为载体的电极对SCN^-有较高的选择性^[1,2],使SCN-选择电极得到了较大的发展.     

柱后衍生高效液相色谱法测定鸡肉中莫能菌素残留量

样品用甲醇－水溶液匀浆、提取后过滤,再用二氯甲烷进行液－液萃取,然后通过Ｓｅｐ－Ｐａｋ柱进一步净化。净化后的样液与香兰素衍生试剂在酸性和加热条件下进行柱后衍生,反应产物在５２０ｎｍ波长处测定。衍生剂：香兰素３０．０ｇ＋浓硫酸２０ｍＬ＋甲醇９５０ｍＬ,流速：０．７ｍＬ／ｍｉｎ;色谱柱：μ－ＢｏｎｄａｐａｋＴＭＣ１８３．９ｍｍｉ．ｄ．×３００ｍｍ,或相当的色谱柱;流动相：Ｖ（甲醇）Ｖ（水）Ｖ（磷酸）＝９４０６０１,流速０．７ｍＬ／ｍｉｎ;柱后反应室：体积大于１．４ｍＬ的不锈钢管（３００ｃｍ×１ｍｍｉ．ｄ．）。