Determination of trace selenium by solid substrate-room temperature phosphorescence enhancing method based on potassium chlorate oxidizing phenyl hydrazine-1,2-dihydroxynaphthalene-3,6-disulfonic acid system

A new method for the determination of trace selenium based on solid substrate-room temperature phosphorimetry (SS-RTP) has been established. This method was based on the fact that in HCl-KCl buffer solution, potassium chlorate could oxidize phenyl hydrazine to form chloridize diazo-ion after being heated at 100 degrees C for 20 min, and then the diazo-ion reacted with 1,2-dihydroxynaphthalene-3,6-disulfonic acid to form red azo-compound which could emit strong room temperature phosphorescence (RTP) signal on filter paper. Selenium could catalyze potassium chlorate oxidizing the reaction between phenyl hydrazine and 1,2-dihydroxynaphthalene-3,6-disulfonic acid, which caused the sharp enhancement of SS-RTP. Under the optimum condition, the relationship between the phosphorescence emission intensity (DeltaIp) and the content of selenium obeyed Beer's law when the concentration of selenium is within the range of 1.60-320 fg spot-1 (or 0.0040-0.80 ng ml-1 with a sample volume of 0.4 microl). The regression equation of working curve can be expressed as DeltaIp=13.12+0.4839CSe(IV) (fg spot-1) (n=6), with correlation coefficient r=0.9991 and a detection limit of 0.28 fg spot-1 (corresponding to a concentration range of 7.0x10(-13) g ml-1 Se(IV), n=11). After 11-fold measurement, R.S.D. were 2.8 and 3.5% for the samples containing 0.0040 and 0.80 ng ml-1 of Se(IV), respectively. This accurate and sensitive method with good repeatability has been successfully applied to the determination of trace selenium in Chinese wolfberry and egg yolk with satisfactory results. The mechanism of the enhancement of phosphorescence was also discussed.     

Determination of trace silver by solid substrate-room temperature phosphorescence quenching method based on double catalytic system of meta-nitrophenyfluorone-polyoxyethylene-chromium-potassium bromate-beta-cyclodextrin

A new solid substrate-room temperature phosphorescence (SS-RTP) quenching method for the determination of trace silver has been established. It is based on the fact that when using Mg(2+) as ion perturber and beta-CD as surfactant, the system of meta-nitrophenyfluorone (R)-polyoxyethylene-Cr(III) can emit strong and stable room temperature phosphorescence signal on filter paper whose surface is modified by polyvinyl alcohol (PVA)-H(3)BO(3)-NaOH. Ag(I) can catalyze KBrO(3) oxidizing R-PEO-Cr(III) system which causes the quenching of SS-RTP. The reducing value of phosphorescence intensity (DeltaI(p)) is directly proportional to the concentration of Ag(I) in the range of 3.2-160 ag spot(-1) (corresponding concentration: 2.43 fg ml(-1), the sample volume: 0.40 microl spot(-1)) with a detection limit (LD) of 0.97 ag spot(-1). The regression equation of working curve can be expressed as DeltaI(p)=13.92+0.3089m(Ag)+ (ag spot(-1)) (r=0.9983, n=6). This method has many advantages, such as a wide linear dynamic range, high sensitivity, good repeatability and selectivity. It has been applied to the determination of trace silver in real samples with satisfactory results. What is more, the mechanism of SS-RTP quenching method based on Ag(I) catalyzing KBrO(3) oxidizing meta-nitrophenyfluorone has also been discussed.     

吖啶红高灵敏催化荧光光度法测定痕量钴(Ⅱ)

在H2SO4介质中,KIO3可氧化吖啶红使之褪色并伴随着吖啶红荧光强度的减弱,但其反应速率较慢。当加入痕量钴(Ⅱ)时,氧化反应明显加快,体系荧光猝灭程度加强,钴(Ⅱ)对该氧化反应具有显著的催化作用。据此建立了一种灵敏度高、选择性好的测定痕量钴(Ⅱ)的催化荧光分析新方法,并研究了该方法的动力学条件。反应体系的激发波长和发射波长分别为530和550nm,催化体系可允许较大量的多种常见离子同时存在。测定钴(Ⅱ)的线性范围为0.3～4.8μg/L,检出限为2.5×10-11g/mL。方法可用于茶叶、人发和面粉等实际样品中痕量钴(Ⅱ)的测定。     

氯酸钾体系催化动力学光度法测定痕量钒(Ⅱ)

研究了在0.1 mol/L H3PO4介质中,活化剂抗坏血酸的作用下,V(Ⅴ)催化KClO3氧化甲基红褪色的指示反应,由此建立了一种测定痕量V(Ⅱ)的催化动力学光度新方法。研究了影响该催化褪色反应的因素。方法的线性范围为0.09～7.0 ng/mL,检出限为2.9×10-2 ng/mL。方法用于实际样品的测定。     

催化碘酸钾氧化异硫氰酸荧光素荧光猝灭法测定痕量硒

基于异硫氰酸荧光素(FITC)可发射强而稳定的荧光信号,KIO3能氧化FITC而发生荧光猝灭,Se(Ⅳ)使FITC的荧光强烈猝灭,Se(Ⅳ)的含量与ΔF值呈线性关系,建立催化KIO3氧化FITC荧光猝灭法测定痕量硒的新方法.方法的线性范围为0.012～2.000×10-15g Se(Ⅳ)/mL,工作曲线回归方程ΔF=1.18+72.74CSe(Ⅳ)(×10-15g/mL)(n=6,r=0.9997),检出限为2.1×10-18g/mL(n=11).分别对Se(Ⅳ)浓度0.012和2.000×10-15g/mL进行7次测定,RSD依次为2.8%和3.5%.用于实际样品中痕量硒的测定和人体疾病的诊断与预报,结果满意.同时探讨了催化荧光猝灭法测定痕量硒的反应机理.     

抑制褪色光度法测定油炸面制食品中痕量铝

建立抑制褪色光度法快速测定食品中痕量铝的方法。在硫酸介质中,一定量的铝离子对溴酸钾氧化罗丹明B褪色有抑制作用,据此建立了抑制褪色光度法快速测定食品中痕量铝的新体系,最大吸收波长为550 nm。在1 mol/L硫酸介质中,铝含量在0.07~0.4μg/mL范围内与吸光度具有良好的线性关系,相关系数r=0.9995,检出限为0.02μg/mL。用该方法测定油炸面制食品中痕量铝,测定结果的相对标准偏差为1.3%~3.1%(n=11),加标回收率为99.3%~103.5%。该方法测定结果准确可靠,可用于食品中痕量铝的测定。     

Determination of aluminum in environmental and biological samples by reversed-phase high-performance liquid chromatography via pre-column complexation with morin

Morin was used as a pre-column reagent for the determination of aluminum by RP-HPLC with fluorescence detection. This method has been successfully applied to direct determination of trace Al in environmental and biological samples. The response was linear from 6 x 10(-9) to 6 x 10(-5) M with a detection limit of 2 x 10(-9) M. In addition, the different Al complexes with morin were separated by the proposed HPLC procedure and their coordination ratios were depicted by molar-ratio method. The results showed that 1:1 and 2:1 Al-morin complexes formed.     

Study on the interaction among pyronine Y, potassium bromate and naphthols by absorption, three-dimension fluorescence and resonance light scattering spectra and their application

A novel method for the determination of trace naphthols was proposed based on naphthols, potassium bromate and pyronine Y in dilute sulfuric acid medium can react to form ion-association complexes, which not only resulted in the changes of the three-dimension fluorescence spectra, absorption spectra and the quenching of fluorescence, but also resulted in the great enhancement of resonance light scattering (RLS). The characteristics of RLS spectra, the effective factors and optimum conditions of reaction were studied. It was found that the enhanced intensity of RLS at 396 nm was proportional to the concentration of 1-naphthol and 2-naphthol in the range of 41.4 approximately 3024 ng mL(-1) and 38.3 approximately 3068 ng mL(-1), respectively. The urine samples analysis of the relative standard deviation was 3.1-7.1% and the average recovery was 96.0% (n=6). The present method had been applied to the determination of trace naphthols in human urine, the obtained results were in good agreement with those obtained by the HPLC method; moreover, we had carried on an initial study of the reaction mechanism in terms of spectral characteristics.     

A fluorescence quenching method for the determination of nitrite with Rhodamine 110

A simple and sensitive fluorescence quenching method for the determination of trace nitrite has been developed. The method is based on the reaction of Rhodamine 110 with nitrite in acidic medium to form a new compound, which has much lower fluorescence. The optimum experimental conditions were studied. The linear range was obtained at a nitrite concentration of 1.0 x 10(-8)-3.0 x 10(-7)mol l(-1) with a detection limit of 7.0 x 10(-10) mol l(-1) (S/N=3). The proposed method has been successfully applied to the determination of nitrite in tap water and lake water without extraction.     

Simultaneous determination of trace iron and aluminum by catalytic spectrophotometry based on a novel oxidation reaction of xylene cyanol FF.

A new, simple, sensitive and selective method for the simultaneous determination of trace iron and aluminum by catalytic spectrophotometry was presented, based on the catalytic effects of iron and aluminum on the discoloring reaction of xylene cyanol FF proceeded by hydrogen peroxide and potassium periodate in weak nitric acid medium. No catalytic effect was obtained in the presence of hydrogen peroxide or potassium periodate only. With the conditional rate constants determined in reaction systems catalyzed by Al or Fe only, the concentrations of Fe and Al in the samples can be calculated. The method was applied to the simultaneous determination of trace Fe and Al in tap water, lake water, river water and tea leaves without separation and preconcentration.     

Determination of trace formaldehyde by solid substrate-room temperature phosphorescence quenching method based on the rose bengal-potassium bromate-Tween-80 system

A new method for the determination of trace formaldehyde by solid substrate-room temperature phosphorescence quenching method has been proposed. It is based on the facts that rose bengal (R) can emit intense and stable room temperature phosphorescence on the solid substrate of filter paper (SS-RTP). Potassium bromate (KBrO(3)) can oxidize R, which causes the quenching of RTP. In the presence of HCHO, it can react with KBrO(3) to form Br(2) and Br(2) can oxidize R, which causes smart quenching of RTP. The phosphorescence intensity (DeltaI(p)) is directly proportional to the concentration of HCHO. In the presence of Tween-80, the DeltaI(p) will be increased to 9.1 times higher than that without it. The linear range of this method is 0.016-1.6fgspot(-1) (corresponding concentration: 0.040-4.0 pgml(-1), 0.40 microlspot(-1)) with the detection limit of 4.5agspot(-1) (corresponding concentration: 1.1 x 10(-14) gml(-1)). The regression equation for working curve is DeltaI(p)=136.6+28.28m(HCHO)fgspot(-1) (r=0.9935, n=6). This method is sensitive, simple, rapid and has been applied to the determination of trace formaldehyde in real samples with satisfactory results. The mechanism of determination of trace formaldehyde by SS-RTP quenching method based on the rose bengal-KBrO(3)-Tween-80 system is also discussed.     

Determination of trace amounts of vanadium with a new reagent [1-(3-methoxysalicylidene-amino)-8-hydroxy-3,6-naphthalene disulfonic acid, disodium salt] by fluorescence quenching method

A fluorescence quenching method is described for the determination of trace amounts of vanadium(V) based on the formation of a complex in acidic medium with a new reagent [1(3-methoxysalicylideneamino)-8-hydroxy-3,6-naphthalene disulfonic acid, disodium salt]. The fluorescence emission is measured at 415 nm (wavelength of excitation 360 nm), and the experimental variables and interferences in this determination have been studied. The detection limit is 12.5 ng/ml and linear range is between 50 and 600 ng/ml. The method has been applied to determine trace vanadium(V) in steel and cast iron.     

催化动力学法测定人发中痕量硒

催化动力学褪色法测定痕量硒已有报道[1 ,2 ] ,但大都存在Ｆｅ3+、Ｃｕ2 +等共存离子的干扰。在实际分析中常需对样品进行繁琐的预处理。实验研究了在盐酸溶液中 ,以ＥＤＴＡ作掩蔽剂 ,痕量硒催化氯酸钾氧化 5 Ｂｒ ＰＡＤＡＰ褪色反应及其动力学条件 ,以加硒催化反应与不加硒非催化反应的吸光度之差△Ａ对温度 1 /Ｔ作图得一直线 ,由Ａｒｒｈｅｎｉｕｓ式求得该反应的活化能Ｅａ=94ｋＪ/ｍｏｌ,建立了测定硒的新方法。方法检测限为 5.7× 1 0 - 5μｇ/ｍｌ,Ｓｅ(Ⅳ)的测定范围为 0～ 0 .4μｇ/ 2 5ｍｌ,用此法测定人发中痕量硒 ,结果令人满…     

镓(Ⅲ)-茜素红体系的吸附伏安法

本文对镓(Ⅲ)与茜素红络合物在悬汞电极上的吸附伏安法作了研究,确定了电极过程.在HAc-NH_4Ac(pH4.06)缓冲溶液中茜素红存在下,用1.5阶微分吸附伏安法测定镓,其线性范围是1×10~(-10)～1×10~(-7)mol/L,其检测限为1×10~(-10)mol/L,并用此法测定了中草药中的痕量镓.     

Spectrofluorimetric method for determination of aluminium with chromotropic acid and its application to water samples

A rapid and sensitive method for the trace level determination of aluminium based on the formation of a 1:1 complex with chromotropic acid (1,8-dihydroxynaphthlene-3,6-disulfonic acid) in an methanol medium is reported. The fluorescence intensity of the system was 50 times greater than that of the system without aluminium. This method is very sensitive and selective for the direct determination of aluminium ion. The fluorescence is excited at 346 nm and measured at 370 nm. The optimum conditions are a chromotropic acid concentration of 5.0 ml (1.0x10(-4) M) and pH 4.0+/-0.5 (acetic acid-sodium acetate buffer). The fluorescence intensity is a linear function of the concentration of Al(III) in the range 2-100 ng ml(-1) and the detection limit is 1.0 ng ml(-1). The method has been applied successfully to the determination of trace amount of Al(III) in tap, river and sea-water samples.     

中性红荧光探针法测定生物大分子核酸

中性红 (NR)是一种吩嗪染料 ,至今已有许多关于 NR与 DNA相互作用的报道[1～ 5] .李克安[4 ] 和黄承志等 [5]利用共振光散射技术分别在酸性 (p H=2 .3 )和中性 (p H=7.6～ 7.8)条件下 ,建立了以 NR为探针测定痕量 DNA的方法 .我们 [2 ,3]曾利用荧光光谱方法研究了在 p H=7.4条件下 NR与 DNA之间的相互作用 ,发现利用吖啶橙和 NR之间的能量转移现象可以测定 DNA,但检出限偏高 ,且由于使用两种染料试剂 ,操作较繁琐 .为了克服吖啶橙、NR能量转移分析法的不足 ,本文建立了在 p H=4.5的条件下以单一染料 NR为荧光探针测定痕量核酸的…     

阻抑茜素红S褪色动力学光度法测定痕量汞

在HAc—NaAc介质中,以邻菲啰啉作活化剂,痕量Cr（Ⅵ）对H2O2氧化茜素红S褪色反应存在强烈的催化作用,而Hg（Ⅱ）对此褪色反应具有明显的阻抑作用,由此建立了测定痕量Hg（Ⅱ）的新阻抑动力学光度法。该方法线性范围为0～1．6μg／mL,检出限为2．6×10^-8g／mL,应用于污水中Hg（Ⅱ）的测定,结果满意。     

Some important moments in the development of organic elementary analysis

As early as 1784, Lavoisier carried out combustions of organic substances in a glass bell-jar filled with oxygen. No quantitative results were however obtained. In 1810, Gay-Lussac and Thenard burned organic material in a vertical tube with potassium chlorate as oxidizing agent, and analyzed the resulting mixture of gases. Later (1814–1817), Berzelius used a horizontal tube and a mixture of potassium chlorate and sodium chloride, and weighed the water and carbon dioxide formed. In 1831, Liebig described his potash apparatus and created a general method for the analysis of organic substances, in which cupric oxide was the oxidizing agent. The most important advance in organic analysis after LIEBIG is due to Pregl (1912). By his very well known methods of micro-analysis, progress in organic chemistry has been stimulated enormously. The volumetric determination of nitrogen suggested by Dumas in 1833, was developed by Pregl into a micro-method.     

Fluorescence Quenching of Tris(2,2′-bipyridine)Ruthenium(II) Dichloride by Certain Organic Dyes

Fluorescence quenching of [Ru(bpy)₃]²⁺ by a series of organic dyes has been investigated by using the steady state fluorescence technique in aqueous medium. The dyes used are anthraquinone dyes: uniblue, acid blue 129, alizarin, alizarin red S and the azo dyes: congo red, sunset yellow, methyl orange, tartrazine, acid orange 63, methyl red and erichrome black T. The quenching of [Ru(bpy)₃]²⁺ was found to obey the Stern-Volmer equation and the corresponding Stern-Volmer plots were linear indicating dynamic quenching. The quenching rate constants (k _q) were calculated from the fluorescence data. The mechanism of quenching was discussed on the basis of the quenching rate constants as well as the reduction potential of dyes. The electron transfer mechanism has been proved by the calculation of Gibbs energy changes (ΔG _et) by applying the Rehm-Weller equation.     

Determination of trace silica in highly purified water based on delayed quenching of Rhodamine B through nanoparticle formation with molybdosilicate

The development of a highly sensitive analytical method for trace silica is an urgent necessity for the real-time monitoring of highly purified water used in the semiconductor industry. However, there are no reports of a simple yet sensitive method for the determination of trace silica. Here we describe the delayed quenching phenomenon of Rhodamine B cation caused by nanoparticle formation with molybdosilicate ions in aqueous solution and its application to the one-step determination of trace silica at ppt to low ppb levels. We found that the quenching takes place over several minutes and the quenching time is dependent on the concentration of silica. The measurements made by a dynamic light scattering particle size analyzer indicated that the diameter of the particles were at nanometer levels. The detection limit was found to be 34 ng dm(-3) Si (1.2 x 10(-9) mol dm(-3)). The average quenching time for 1 microg dm(-3) was 239 s with an RSD of 2.2% (n= 7). The proposed method has been successfully applied to distilled and highly purified water samples. There was good agreement between the results obtained by the proposed method and those by ICP-three dimensions quadrupole MS/MS with 11-fold evaporation concentration. The main point of this method is that in the trace determination of silica, the signal is larger at lower concentrations. The advantages of the proposed method are that it can be used as real-time monitoring for trace silica in highly purified water, and will be a great aid to industries in which the quality control of water is crucial.