Analysis of polycyclic aromatic hydrocarbons in the particulate phase of cigarette smoke using a gas chromatographic-high-resolution mass spectrometric technique

A new procedure is developed for the extraction of polycyclic aromatic hydrocarbons (PAHs) from the particulate phase of cigarette smoke. The procedure applies solid-phase extraction using a Bond Elut CH cartridge as a sample preparation step. The efficiency of the cleanup procedure is verified using a gas chromatographic (GC)-high-resolution mass spectrometric (MS) technique, proving that no interference occurs in the PAHs' determination. The efficient cleanup allows GC detection using either high- or low-resolution MS detection. Enhanced sensitivity is obtained using GC-MS and selected ion monitoring. This new technique has several advantages over other reported techniques. The method is simple and robust and has good repeatability and accuracy. The estimated detection limit is 0.1 ng/cigarette for benzo[a]pyrene. In addition to that, the recovery from the smoke pad in which the smoke is collected is approximately 97% for all PAHs. Results for the PAH analyses for 1R5F, 1R4F, and 1R3 Kentucky reference cigarettes are reported in this study. These results provide useful evidence for clarifying the controversy about previously reported data.     

Milligram determination of aromatic amines and phenols with N-bromosuccinimide

A simple and rapid method has been developed for the determination of milligram amounts of aromatic amines and phenols. An aliquot containing 2-4 mg of sample is dissolved in a mixture of hydrochloric and acetic acids and allowed to react with N-bromo-succinimide, the excess of which is determined iodometrically after the reaction is over. The reaction time varies from 1-10 min and the absolute error generally is negative, ranging from -1 to -4%.     

Measurement of nitrogen dioxide in cigarette smoke using quantum cascade tunable infrared laser differential absorption spectroscopy (TILDAS)

Although nitrogen dioxide (NO(2)) has been previously reported to be present in cigarette smoke, the concentration estimates were derived from kinetic calculations or from measurements of aged smoke, where NO(2) was formed some time after the puff was taken. The objective of this work was to use tunable infrared laser differential absorption spectroscopy (TILDAS) equipped with a quantum cascade (QC) laser to determine if NO(2) could be detected and quantified in a fresh puff of cigarette smoke. A temporal resolution of approximately 0.16s allowed measurements to be taken directly as the NO(2) was formed during the puff. Sidestream cigarette smoke was sampled to determine if NO(2) could be detected using TILDAS. Experiments were conducted using 2R4F Kentucky Reference cigarettes with and without a Cambridge filter pad. NO(2) was detected only in the lighting puff of whole mainstream smoke (without a Cambridge filter pad), with no NO(2) detected in the subsequent puffs. The measurement precision was approximately 1.0 ppbVHz(-1/2), which allows a detection limit of approximately 0.2 ng in a 35 ml puff volume. More NO(2) was generated in the lighting puff using a match or blue flame lighter (29+/-21 ng) than when using an electric lighter (9+/-3 ng). In the presence of a Cambridge filter pad, NO(2) was observed in the gas phase mainstream smoke for every puff (total of 200+/-30 ng/cigarette) and is most likely due to smoke chemistry taking place on the Cambridge filter pad during the smoke collection process. Nitrogen dioxide was observed continuously in the sidestream smoke starting with the lighting puff.     

Determination of total and polycyclic aromatic hydrocarbons in aviation jet fuel

The aviation jet fuel widely used in turbine engine aircraft is manufactured from straight-run kerosene. The combustion quality of jet fuel is largely related to the hydrocarbon composition of the fuel itself; paraffins have better burning properties than aromatic compounds, especially naphthalenes and light polycyclic aromatic hydrocarbons (PAHs), which are characterised as soot and smoke producers. For this reason the burning quality of fuel is generally measured as smoke fermation. This evaluation is carried out with UV spectrophotometric determination of total naphthalene hydrocarbons and a chromatographic analysis to determine the total aromatic compounds. These methods can be considered insufficient to evaluate the human health impact of these compounds due to their inability to measure trace (ppm) amounts of each aromatic hyrcarbon and each PAH in accordance with limitations imposed because of their toxicological properties. In this paper two analytical methods are presented. Both are based on a gas chromatographic technique with a mass detector operating in be selected ion monitoring mode. The first method was able to determine more than 60 aromatic hydrocarbons in a fuel sample in a 35-min chromatographic run, while the second was able to carry out the analysis of more than 30 PAHs in a 40-min chromatographic run. The linearity and sensitivity of the methods in measuring these analytes at trace levels are described.     

Rapid and sensitive method for simultaneous determination of six carcinogenic aromatic amines in mainstream cigarette smoke by liquid chromatography/electrospray ionization tandem mass spectrometry

Aromatic amines are one of the sources of carcinogenicity in cigarette and tobacco smoke. Accurate quantification of these chemicals is needed to assess public health risk. A new validated rapid, sensitive and analyte specific liquid chromatography/electrospray ionization tandem mass spectrometric (LC/MS/MS) method has been developed for the simultaneous determination of six aromatic amines in mainstream cigarette smoke using research reference cigarette 2R4F. Three popular Indian brand cigarettes were also analyzed using the same procedure. The limit of detection of this method ranged from 0.04 to 0.59 ng/cig using an injection volume of 7 μl. The identification of each amine was established by chromatographic retention times, analyte specific fragmentation pattern and relative peak area ratios of two product/precursor ion pairs. The method showed excellent reproducibility and was also rapid, selective and robust for aromatic amine determination from cigarette smoke.     

Analysis of aromatic amines as N-propoxycarbonyl derivatives by gas chromatography with nitrogen-phosphorus selective detection

A selective and sensitive method for the analysis of aromatic amines by GC was developed. Aromatic amines were converted to their N-n-propoxycarbonyl derivatives and measured by GC with nitrogen-phosphorus selective detection (NPD) using an HP-5 fused-silica capillary column. The derivatives of the 20 aromatic amines provided excellent NPD responses, and were resolved both quantitatively and reproducibly within 15 min. The calibration curves for aromatic amines in the range 20-500 ng were linear and the detection limits at an S/N of 3 were ca. 19-139 pg injected. This method was applied successfully to combustion smoke and human urine samples, and analyzed without any interference from coexisting substances.     

Polyvinylpolypyrrolidone-bromine complex: Mild and efficient polymeric reagent for bromination of activated aromatic compounds

Mild and efficient method for bromination of electron-rich aromatic compounds is described using polyvinylpolypyrrolidone-bromine complex（PVPP-Br₂）.The reaction proceeded smoothly with phenols and N,N-alkylated amines to afford the corresponding monobrominated product in good yields at ambient temperature.     

New technique using solid-phase extraction for the analysis of aromatic amines in mainstream cigarette smoke

A new procedure has been developed for the quantitation of aromatic amines in mainstream cigarette smoke. Two solid-phase extraction (SPE) cleanup steps using different retention mechanisms are required to process the samples. The first step uses a cation-exchange cartridge, followed by a second step that uses a cartridge with a hydrophobic retention character. The aromatic amines eluted from the second SPE cartridge are derivatized with heptafluorobutyric anhydride and analyzed with GC-MS selected ion monitoring in the negative chemical ionization mode. This new method has several advantages over other reported techniques, being sensitive, robust, and easily automated. The detection limits ranged from 0.02 ng/cigarette for tolidine to 1.41 ng/cigarette for aniline and the recoveries were from 79 to 109%.     

芳香胺和酚溴化的新工艺

研究了在室温下,N-溴丁二酰亚胺对芳香胺和酚的溴化工艺,在CHCl3、EtOH或EtOH/CHCl3溶剂中,用等摩尔的N-溴丁二酰亚胺可将某些芳香胺和酚(考察了5种反应底物)选择性地一溴化,产率92%~98%,N-溴丁二酰亚胺和反应底物摩尔比为2∶1;某些芳香胺和酚被专一地二溴化(考察了5种反应底物),产率90%~97%。 反应无须催化剂,投料后室温搅拌,反应条件温和,产品只需过滤洗涤即可纯化,操作简便。     

Volatile phase profiling of mainstream smoke by glass capillary gas-chromatographic techniques

A heated injection system for a microprocessor-controlled GC has been developed for the (GC)² analysis of the volatile phase of whole smoke of a cigarette. Effects of injection port temperature and the presence of a Cambridge filter pad are demonstrated. Chromatograms are shown for smoke samples with and without a Cambridge Filter with the sample valve oven at 25°, 165° and 205°C. The use of a flame ionization and a nitrogen-phosphorous detector is illustrated.     

Analysis of aromatic amines in cigarette smoke

A method for the analysis of o-toluidine, o-anisidine, 2-naphthylamine, and 4-aminobiphenyl in cigarette mainstream smoke has been developed, which combines the sensitivity of their pentafluoropropionyl (PFP) derivatives in negative ion chemical ionization (NICI) mode with the selectivity of the gas chromatography/tandem mass spectrometry (GC/MS/MS) technique. The use of four deuterated analogues as internal standards along with the application of the standard addition method results in accurate and precise results; the interday precision for the aromatic amines was 3-10% and the accuracy ranged from 97-100%. This method was applied to two American-blend University of Kentucky reference cigarettes, eight American-blend market cigarettes, a bright (flue-cured) tobacco cigarette, and an electrically heated cigarette smoking system (EHCSS). For the American-blend cigarettes there was a linear correlation between aromatic amine yields and mainstream smoke 'tar' ('tar' = total particulate matter - (nicotine + water)), whereas the bright tobacco cigarette and the EHCSS demonstrated significantly lower aromatic amine yields on an equal 'tar' basis. The results support the hypothesis that the nitrogen content of the tobacco, and above all the cigarette combustion temperature, are determining factors for the yields of aromatic amines in smoke.     

气相色谱质谱法测定化妆品中9种多环芳烃

建立了气相色谱质谱法测定化妆品中9种多环芳烃的分析方法。化妆品中的萘、苯并[a]蒽、、苯并[b]荧蒽、苯并[j]荧蒽、苯并[k]荧蒽、苯并[e]芘、苯并[a]芘、二苯并[a,h]蒽等9种多环芳烃用甲醇超声提取后,用环己烷液-液萃取后浓缩,经硅胶-中性氧化铝柱净化后,采用气相色谱-质谱测定。多环芳烃浓度在0.05～2 mg/L范围内,质量浓度与其峰面积呈良好的线性关系。在低、中、高3个添加水平下,9种多环芳烃化合物的平均回收率为81.6%～100.2%,相对标准偏差为1.3%～5.8%。方法可用于化妆品中多环芳烃的检测。     

Pyrrole-based conductive polymer as the solid-phase extraction medium for the preconcentration of environmental pollutants in water samples followed by gas chromatography with flame ionization and mass spectrometry detection

A pyrrole-based polymer was synthesized and applied as a new sorbent for solid-phase extraction (SPE) of some environmental pollutants from water samples. Polypyrrole (PPy) was synthesized by chemical oxidation of the monomer in nonaqueous solution. SPE of selected phenols, pesticides, and polyaromatic hydrocarbons (PAHs) from aqueous samples were performed using 200 mg PPy. The determination was subsequently carried out by gas chromatography-flame ionization detection (GC-FID) and gas chromatography-mass spectrometry (GC-MS). The polymer showed much higher recoveries for aromatic compounds than aliphatics. Preconcentration of sample volumes up 11 led to acceptable recoveries for aromatic and other tested polar compounds. The R.S.D. for a river water sample spiked with phenols, pesticides and PAHs at sub-ppb level was lower than 10% (n = 3) and limits of detection for these compounds were between 15 and 120 ng l(-1).     

Supercritical fluid clean-up of environmental samples for the analysis of polycyclic aromatic hydrocarbons using time-of-flight secondary ion mass spectrometry.

A novel sample-pretreatment method for time-of-flight secondary ion mass spectrometry (TOF-SIMS) was developed using supercritical fluid extraction (SFE). In SFE, the extraction efficiency of a certain organic matter is controlled by the pressure and temperature of supercritical CO2. Two-step SFE (1st step at 10 Mpa, 40 degrees C; 2nd step at 30 MPa, 120 degrees C) was applied to diesel exhaust particles containing many kinds of n-alkanes and aromatic species. n-Alkanes and polycyclic aromatic hydrocarbons (PAHs) were extracted in the 1st and 2nd steps, respectively. This selectivity was utilized for the sample preparation of TOF-SIMS analysis. Diesel exhaust particles after the 1st step of extraction were analyzed with TOF-SIMS, aiming at PAHs as analytical targets. The obtained spectrum was simplified, and mass peaks of individual PAHs were easily assigned, because unwanted compounds, like n-alkanes, were selectively removed by SFE. Furthermore, a simple calculation elucidated the outline of the spectrum.     

Combined Extraction and Electrochemical Detection of Amines and Phenols Using Microelectrodes in Organic Solvents

A straightforward approach for liquid‐liquid extractive detection of aromatic amines and phenols is described based on the spontaneous transfer of the molecule from the aqueous to an organic phase and subsequent electrochemical detection in the latter phase using a microelectrode. It is demonstrated that the extent of the transfer can be modified by altering the pH of the aqueous solution and the organic solvent. It is also concluded that the presence of an ion‐pair formation agent does not increase the transfer yield for 4‐chloroaniline and phenol. The present approach combines liquid‐liquid sample clean‐up and quantification into a single step which significantly facilitates determinations of aromatic amines and phenols present in complex samples.     

全自动固相萃取-气相色谱-串联质谱法测定卷烟主流烟气中的3种多环芳烃

以全自动固相萃取技术净化主流烟气萃取液,建立了卷烟主流烟气中苯并［a］芘、苯并［a］蒽和屈艹 3种多环芳烃的气相色谱-串联质谱(GC-MS/MS)测定方法。以吸烟机抽吸卷烟,并以剑桥滤片捕集卷烟主流烟气,然后以含氘代苯并［a］芘内标的环己烷溶液萃取滤片,萃取液经全自动固相萃取仪净化后以GC-MS/MS分离检测。结果表明,苯并［a］芘、苯并［a］蒽和屈艹 的检出限分别为0.05、0.16和0.23 ng/cig,回收率为91.5%～102.1%,相对标准偏差(RSD)均小于5%。该方法的自动化程度高、操作简便、检出限低、重复性好,适用于卷烟主流烟气中苯并［a］芘、苯并［a］蒽 3种多环芳烃释放量的检测。     

Highly effi cient and regioselective thiocyanation of aromatic amines,anisols and activated phenols with H2O2/NH4SCN catalyzed by nanomagnetic Fe3O4

A new method employing magnetic nanoparticles Fe3O4 as a catalyst and H2O2 as a green oxidant is developed for the oxidative thiocyanation of aromatic amines, anisols and activated phenols with high yields under mild reaction conditions. The catalyst could be easily recovered from the reaction mixture using an external magnet and reused in several reaction cycles without loss of activity.     

神木煤显微组分热解和加氢热解的焦油组成

利用色谱-质谱联用技术测定了神木煤镜质组和惰质组在不同热解条件下焦油的组成,考察了显微组分类型和反应气氛对苯类、酚类、萘类、含氧杂环和多环芳烃类化合物产率的影响。结果表明,惰质组和镜质组焦油在组成和长链烃类、芳烃、含氧杂环和多环芳烃的相对质量分数方面存在很大差异。镜质组焦油中长链烃类的种类和相对质量分数较高,惰质组焦油中芳烃、含氧杂环和多环芳烃的种类和相对质量分数较高,反映了镜质组显微组分芳香度较低以及烷基侧链长和多以及惰质组稠环芳烃结构多和芳环缩聚程度高的特点。加氢热解比热解有较高的焦油收率,随氢气压力的增加,焦油的收率大幅度增加。镜质组和惰质组热解和加氢热解焦油组成和相对质量分数的差异反映了热解过程中氢气的加氢稳定化作用和加氢裂解作用。     

载氯化碘Lin树脂的制备及其对活泼芳香化合物的碘化研究

聚合物Lin树脂与氯化碘作用得到载氯化碘Lin树脂。室温及CaCO3或NaHCO3存在下,该树脂在CH2Cl2和CH3OH溶液中,使芳胺、乙酰芳胺和酚碘化为相应的1-碘取代芳香化合物,产率为80.5%～94.0%。该树脂是一种反应条件温和,选择性好的活泼芳环碘化剂。Lin树脂可再生重复使用。     

Synthesis of 2-chloro-2-imidazoline and its reactivity with aromatic amines,phenols, and thiophenols

2-Chloro-2-imidazoline has been synthesized by the reaction of ethylene-thiourea with chlorine in aqueous solution at 50°. The compound was reacted with aromatic amines, phenols, and thiophenols.