羟基磷酸铜的快速绿色合成

通过研究羟基磷酸铜的合成条件, 提出了一种快速绿色的新合成方法, 在不使用有机胺和减少磷酸使用量的条件下, 降低水热晶化的温度, 缩短了合成所需要的时间. 同时对所制得样品的苯酚羟化催化活性进行了表征.     

The Chemistry of Form

The emergence of complex form in living and nonliving systems remains a deep question for scientists attempting to understand the origins and development of shape and structure. In recent years, biologists and physicists have made significant advances in explaining fundamental problems in fields such as morphogenesis and pattern formation. Chemists, on the other hand, are only just beginning to contemplate the possibility of preparing manmade materials with lifelike form. This review traces a route to the direct synthesis of inorganic structures with biomimetic form, beginning from an understanding of crystal morphology and biomineralization. The equilibrium form of crystals can be modified by surface-active additives but only within limits dictated by the symmetry of the unit cell. In contrast, biological minerals, such as shells, bones, and teeth, are distinguished by a complexity of form that bears little resemblance to the underlying order of their inorganic crystals. By understanding the constructional processes that give rise to the inorganic structures of life it should be possible to develop a chemistry of form in the laboratory. For example, complex small-scale inorganic architectures are produced at room temperature by undertaking precipitation reactions in self-assembled organic media, such as surfactant micelles, block copolymer aggregates and microemulsion droplets. Unusual inorganic forms emerge when these reaction fields are subjected to instability thresholds and synthesis and self-assembly can be coupled to produce materials with higher-order organization. Like their biological counterparts, these hard inorganic structures represent new forms of organized matter which originate from soft chemistry.     

Fabrication of upended taper-shaped cuprous thiocyanate arrays on a copper surface at room temperature

A new strategy has been well designed to form upended taper-shaped cuprous thiocyanate (hereafter abbreviated as CuCNS) arrays on a copper substrate with use of a simple solution-phase method at room temperature. This method consists of a liquid-solid reaction between a solution of thiocyanate ammonium and the copper substrate itself in the assistance of formamide. Novel CuCNS arrays are approximately perpendicular to copper substrate surfaces. Every single crystal shows an upended taper-like morphology (i.e., the tip end points into the surface of copper substrate and the other big end of the taper exposes out, like a dart thrusting into the copper substrate). On the basis of structure and chemical bond analysis, CuCNS crystals tend to grow along the c-axis, which is essential for the formation of CuCNS arrays on a copper substrate. This approach also provides a facile strategy to produce different patterns on different copper substrates, which may be applicable to the synthesis of other inorganic materials with various potential applications.     

Structure determination of atomically controlled crystal architectures grown within single wall carbon nanotubes.

Indirect high resolution electron microscopy using one of several possible data-set geometries offers advantages over conventional high-resolution imaging in enabling the recovery of the complex wavefunction at the specimen exit plane and simultaneously eliminating the aberrations present in the objective lens. This article discusses results obtained using this method from structures formed by inorganic materials confined within the bores of carbon nanotubes. Such materials are shown to be atomically regulated due to their confinement, leading to integral layer architectures that we have termed "Feynman crystals." These one-dimensional (1D) crystals also show a wide range of structural deviations from the bulk, including unexpected lattice distortions, and in some cases entirely new forms have been observed.     

Morphological evolution of inorganic crystal into zigzag and helical architectures with an exquisite association of polymer: a novel approach for morphological complexity

The morphology of potassium sulfate (K(2)SO(4)) crystals grown in a viscous polymer solution of poly(acrylic acid) (PAA) was remarkably changed from the tilted columnar assembly into zigzag and helical architectures with increasing PAA concentration. The habit modification of orthorhombic K(2)SO(4) with adsorption of PAA molecules on a specified crystal face fundamentally led to the formation of tilted unit crystals. Concurrently with the habit modification, a diffusion-limited condition controlling the assembly of tilted units was achieved in the presence of PAA molecules in the matrix. Various complex morphologies, including zigzag and helical assembly, emerged through the formation of twinned crystals with the variation of the diffusion condition. Understanding the morphogenesis observed in this report would provide a novel approach for sophisticated crystal design by using an exquisite association of organic and inorganic materials.     

Determination of phosphatidylcholine in amniotic fluid

A relatively rapid method for measuring phosphatidylcholine (lecithin) quantitatively in amniotic fluid has been described that requires 1 ml or less of sample for fluids having a total phospholipid concentration greater than 25 mg/liter. Following extraction with chloroform-methanol, the solvent is passed through a calcium hydroxyphosphate column which removes the acidic phospholipids and allows passage of the phosphatidylcholine and sphingomyelin. Hydrolysis with periodate-sulfuric acid selectively releases inorganic phosphate from the phosphatidylcholine that is measured by reduction of the formed phosphomolybdate complex to the usual blue color. Various mixtures of phospholipids were carried through the entire procedure with excellent recoveries. Phosphatidylcholine added to an amniotic fluid pool was also quantitatively recovered, so that the method appeared completely suitable for routine clinical laboratory use.     

Vibrational spectroscopic analysis of cytosine monohydrate and its copper(II) complex

Single crystals of cytosine monohydrate and its copper(II) complex were grown by slow evaporation in an aqueous solution at room temperature. The solubility studies were carried out at different temperatures in deionized water. Cytosine monohydrate and the copper(II) complex of cytosine were characterized by recording IR, Raman and UV spectra. The various vibrational modes of the crystals have been classified using factor group and site group analysis. Vibrational assignments were proposed for both the systems based on the spectral investigations.     

Synthesis and characterisation of copper(II) hydroxide gels

The formation of copper(II) hydroxide gels from aqueous precursors requires very critical conditions. Gels have been obtained by adding ammonia to aqueous solutions of copper(II) acetate, in the presence of a small amount of sulphate ions. Other salts (chloride, nitrate, sulphate) or bases (NaOH, KOH) lead to precipitation rather than gelation. These gels are actually made of an intimate mixture of acetate-based organic/inorganic polymers and nanometric posjnakite crystals Cu₄(OH)₆(SO₄) · H₂O. Acetate ions and ammonia can be partially removed upon washing, which after drying leads to crystalline copper(II) hydroxide needles deposited on a strongly oriented layer of posjnakite crystals. A theoretical model based on the electronegativity equalisation principle is used to describe these experimental results. It provides a better understanding of the role of complexing anions during the formation of condensed phases.     

Beyond Molecules: Mesoporous Supramolecular Frameworks Self‐Assembled from Coordination Cages and Inorganic Anions

Biological function arises by the assembly of individual biomolecular modules into large aggregations or highly complex architectures. A similar strategy is adopted in supramolecular chemistry to assemble complex and highly ordered structures with advanced functions from simple components. Here we report a series of diamond‐like supramolecular frameworks featuring mesoporous cavities, which are assembled from metal‐imidazolate coordination cages and various anions. Small components (metal ions, amines, aldehydes, and anions) are assembled into the hierarchical complex structures through multiple interactions including covalent bonds, dative bonds, and weak C? H???X (X=O, F, and π) hydrogen bonds. The mesoporous cavities are large enough to trap organic dye molecules, coordination cages, and vitamin B₁₂. The study is expected to inspire new types of crystalline supramolecular framework materials based on coordination motifs and inorganic ions.     

New functionalization of graphene oxide with N2O2 ligand for efficient loading of Cu nanostructures as a heterogeneous nanocatalyst for the synthesis of β-hydroxy-1,2,3-triazoles

A new and heterogeneous copper complex immobilized on graphene oxide (GO) was prepared. This was achieved through organic functionalization of GO using 1,8-diamino-3,6-dioxaoctane (DADO) and then inorganic coordination of copper on the edges and basal plane of the functionalized GO (GO-DADO-Cu), which was reduced to Cu(0). The chemical structure of the prepared nanocatalyst was analyzed using various techniques. Most of the analyses confirmed the successful anchoring of copper and organic ligand on the GO surface. Moreover, the synthesized nanocatalyst has shown high catalytic activity in the synthesis of β-hydroxy-1,2,3-triazole derivatives under mild reaction conditions (water and room temperature) resulting in good to excellent yields.     

Calculation of the bulk modulus of simple and complex crystals with the chemical bond method

The relation between the lattice energies and the bulk moduli on binary inorganic crystals was studied, and the concept of lattice energy density is introduced. We find that the lattice energy densities are in good linear relation with the bulk moduli in the same type of crystals, the slopes of fitting lines for various types of crystals are related to the valence and coordination number of cations of crystals, and the empirical expression of calculated slope is obtained. From crystal structure, the calculated results are in very good agreement with the experimental values. At the same time, by means of the dielectric theory of the chemical bond and the calculating method of the lattice energy of complex crystals, the estimative method of the bulk modulus of complex crystals was established reasonably, and the calculated results are in very good agreement with the experimental values.     

Catalytic Oxidative Coupling of 1-Phenyl-1H-tetrazole-5-thiol(HL) and Complex[Cu(I)_6L_6]with a Chair Configuration

Both a persulfide crystal of L-L(1), the oxidative coupling product of 1-phenyl-1H-tetrazole-5-thiol(HL), and a neutral copper(I) complex of Cu6L6(2) were self-assembled and their crystal architectures were characterized by CCD method. HL was converted into the persulfide L-L(1) over a metalloporphyrin catalyst with enzymatic characters under ambient conditions. Whlie in the crystal architecture of Cu6L6(2), 6 copper(I) ions were ligated by 6L-anions to construct a Cu6 ring, which just resembled the chair c...     

羟基磷酸铜催化剂催化羟化苯酚动力学研究

利用初始反应速率动力学方法研究以过氧化氢为氧化剂.羟基磷酸铜为催化剂催化氧化苯酚的动力学.对催化剂的用量、过氧化氢和苯酚浓度以及温度的影响进行了仔细研究.反应物和催化剂对该反应都是一级的,表观活化能为12kJ/mol.在考虑到所有的吸附平衡后.给出了相应的动力学公式.     

ZnO微结构调控及其光学性能的研究

氧化锌不同形貌的合成与控制可以通过一个简单的溶剂热反应来实现,其中乙醇作溶剂,酒石酸做添加剂。通过控制酒石酸的加入量,可以有效地控制ZnO的形貌、尺寸以及到更复杂结构的转变。同时提出了不同形貌ZnO可能的生长机制,并利用FTIR谱进一步证实了酒石酸对ZnO生长的影响。另外,由光致发光光谱可以看出,不同的ZnO形貌,发光性能会有所不同,总体上说,所得ZnO的发光区域主要集中在紫光波段和橙光波段。     

Unique crystal morphologies of glycine grown from octanoic acid-in-water emulsions

We have obtained both porous and dendritic, intricate morphology crystals of beta-glycine by the novel and simple method of emulsion droplet adhesion and encapsulation. By using octanoic acid emulsified with nonionic surfactants, the adhesion of the emulsion droplets can be so strong that, remarkably, crystal growth often proceeds around the droplets, leading to their inclusion within the single crystals. Consequently, porous single crystals can be produced with the pore diameters ( approximately 10-25 mum) corresponding to the emulsion droplet sizes. Highly intricate, dendritic morphologies for glycine were obtained by increasing the surfactant concentration in the emulsions to 50%. In this case, partial droplet encapsulation results in crystal dendrites growing on either side of adsorbed droplets, with the complex morphologies developing due to the high density of dendritic branches that can occur. These intricate morphologies are in stark contrast to the facetted crystals that normally develop at these low supersaturations in the absence of octanoic acid droplets. This study demonstrates that complex architectures can be attained by using simple emulsion systems and tuning the degree of droplet adhesion.     

Layer by layer complex architectures based on ammonium polyphosphate,chitosan and silica on polyester-cotton blends: flammability and combustion behaviour

Hybrid organic–inorganic coatings containing ammonium polyphosphate (APP), chitosan and silica have been deposited on polyester-cotton blends (PET-CO), exploiting the layer by layer assembly. To this aim, two different complex architectures (namely, chitosan/APP bilayers plus silica/silica bilayers or silica/silica/chitosan/APP quadlayers) have been thoroughly investigated. The effect of their morphologies on the flame retardancy properties of the fabrics (flammability and combustion behaviour) has been assessed. More specifically, some of the above complex architectures exhibited significant enhancements concerning flammability (i.e. the suppression of afterglow, together with a considerable final residue increase) and combustion behaviour as evidenced by cone calorimeter tests. A close relationship between the overall flame retardancy properties of the blends and the level of dishomogeneity of the LbL architectures has been shown.     

The Physicochemical Properties of the Surface of Copper Nanopowders Prepared by the Electroexplosion and Gas-Phase Methods

The temperature-programmed ammonia desorption, IR spectroscopy, differential thermal analysis, and inorganic test-reagent methods were used to study the properties of copper nanopowders prepared under various conditions of wire electroexplosion and gas-phase synthesis. Electroexplosion in nitrogen was shown to favor the formation of copper nanopowders with acid surface properties. Explosion in argon produced powders with reducing surface properties, which could be detected in aqueous solutions of ammonia and iodine during several minutes.     

Trace metals species in sea-water-I: removal of trace metals from sea-water by a chelating resin

A significant fraction of the copper, lead, cadmium and zinc in sea-water exists in a form which is not retained by a chelating resin (Chelex-100) or extracted by ammonium pyrrolidinedithiocarbamate. Anodic stripping voltammetric results suggest that the major part of the unavailable trace metal is adsorbed on, or occluded in, organic or inorganic colloidal particles. An ionic equilibria computer program was used to predict the effect of various complexing agents on trace metal species in sea-water. Citric acid and amino-acids, with the exception of l-cysteine, were shown to be unimportant as complexing agents, and the ability of an EDTA-like ligand to complex Cu, Pb, Cd and Zn is controlled entirely by the concentrations of the ligand and of "labile" Fe(III) and Cr(III) in sea-water, since these two ions together will react quantitatively with EDTA. l-Cysteine, if present in sea-water, would also complex the trace metals.     

Organically-templated metal sulfates, selenites and selenates

The literature on inorganic open-framework materials abounds in the synthesis and characterization of metal silicates, phosphates and carboxylates. Most of these materials have an organic amine as the template. In the last few years, it has been shown that anions such as sulfate, selenite and selenate can also be employed to obtain organically templated open-framework materials. This tutorial review provides an up-to-date survey of organically templated metal sulfates, selenites and selenates, prepared under hydrothermal conditions. The discussion includes one-, two-, and three-dimensional structures of these materials, many of which possess open architectures. The article should be useful to practitioners of inorganic and materials chemistry, besides students and teachers. The article serves to demonstrate how most oxy-anions can be used to build complex structures with metal-oxygen polyhedra.     

石榴状凝胶微球固定化漆酶的制备、 表征及降解双酚A

采用铜/锌复合金属磷酸盐晶体和海藻酸钙凝胶双重包覆技术对漆酶进行固定化, 制得石榴状Alg@Cu₃/Zn₃(PO₄)₂@Lac的凝胶微球. SEM, EDX和FTIR表征结果表明, 在凝胶微球内部, 漆酶被成功固定于由海藻酸钙凝胶包覆的铜/锌复合金属磷酸盐晶体内, 铜/锌复合金属磷酸盐晶体镶嵌于海藻酸钙凝胶网格的孔隙中而呈石榴状. 以2,2′-联氮双(3-乙基苯并噻唑啉-6-磺酸)(ABTS)为底物, 经酶学性质研究表明, 在无机盐晶体和海藻酸钙凝胶的双重保护下, Alg@Cu₃/Zn₃(PO₄)₂@Lac的耐热性、 耐酸性以及储存稳定性比游离漆酶均有不同程度增强. 将Alg@Cu₃/Zn₃(PO₄)₂@Lac应用于双酚A(BPA)的降解, 采用孔径约1 mm滤网实现快速回收, 经6次循环利用, 对BPA的降解率下降约14%, 显示出比较稳定的重复利用性和便捷的可操作性, 这主要得益于海藻酸钙和铜/锌无机盐晶体对漆酶蛋白分子的双重保护.