The thermodynamic properties of 2-ethylhexyl acrylate over the temperature range from <Emphasis Type="Italic">T</Emphasis> → 0 to 350 K

The temperature dependence of the heat capacity C _p ^o= f(T) 2 of 2-ethylhexyl acrylate was studied in an adiabatic vacuum calorimeter over the temperature range 6–350 K. Measurement errors were mainly of 0.2%. Glass formation and vitreous state parameters were determined. An isothermic shell calorimeter with a static bomb was used to measure the energy of combustion of 2-ethylhexyl acrylate. The experimental data were used to calculate the standard thermodynamic functions C _p ^o(T), H ^o(T)-H ^o(0), S ^o(T)-S ^o(0), and G ^o(T)-H ^o(0) of the compound in the vitreous and liquid states over the temperature range from T → 0 to 350 K, the standard enthalpies of combustion Δ_c H ^o, and the thermodynamic characteristics of formation Δ_f H ^o, Δ_f S ^o, and Δ_f G ^o at 298.15 K and p = 0.1 MPa.     

The thermodynamic functions of fullerene derivative (<Emphasis Type="Italic">t</Emphasis>-Bu)<Subscript>12</Subscript>C<Subscript>60</Subscript> over the temperature range from <Emphasis Type="Italic">T</Emphasis> → 0 to 420 K

The temperature dependence of heat capacity C _p ^o = f(T) of fullerene derivative (t-Bu)₁₂C₆₀ has been measured by a adiabatic vacuum calorimeter over the temperature range T = 6–350 K and by a differential scanning calorimeter over the temperature range T = 330–420 K for the first time. The low-temperature (T ≤ 50 K) dependence of the heat capacity was analyzed based on Debye’s the heat capacity theory of solids and its fractal variant. As a consequence, the conclusion about structure heterodynamicity is given. The experimental results have been used to calculate the standard thermodynamic functions C _p ^o (T), H ^o(T)−H ^o(0), S ^o(T) and G ^o(T) − H ^o(0) over the range from T → 0 to 420 K. The standard entropy of formation at 298.15 K of fullerene derivative under study was calculated. The temperature of decomposition onset of derivative was determined by differential scanning calorimetery and thermogravimetric analysis. The standard thermodynamic characteristics of (t-Bu)₁₂C₆₀ and C₆₀ fullerite were compared.     

Thermodynamic properties of poly[<Emphasis Type="Italic">bis</Emphasis>(trifluoroethoxy) phosphazene] in the range from <Emphasis Type="Italic">T</Emphasis>→0 TO 620 K

By adiabatic vacuum and dynamic calorimetry, heat capacity for poly[bis(trifluoroethoxy)phosphazene] has been determined over the 6–620 K range. Physical transformations of the polymer on its heating and cooling have been detected and characterized. Smoothed heat capacity C _p⁰(T) and standard thermodynamic functions (H ⁰(T)-H ⁰(0), S ⁰(T) and G ⁰(T)-H ⁰(0)) of poly[bis(trifluoroethoxy)phosphazene] have been evaluated for the temperature range from T→0 to 560 K. The standard entropy of formation Δ_f S ⁰ at T=298.15 K has been also determined. Fractal dimensions D in the heat capacity function of the multifractal variant of Debye’s theory of heat capacity of solids characterizing the heterodynamics of the tested polymer have been determined.     

The thermodynamic properties of bis(η<Superscript>6</Superscript>-ethoxybenzene)chromium fulleride from <Emphasis Type="Italic">T</Emphasis> → 0 to 340 K

The temperature dependence of the heat capacity of crystalline bis-(η⁶-ethoxybenzene)chromium fulleride [(η⁶-(EtOPh))₂Cr]^·+[C₆₀]^·− was studied for the first time by adiabatic vacuum calorimetry over the temperature range 6–340 K with errors of ±0.2%. The temperature dependence of the EPR signal parameters of bis-(η⁶-ethoxybenzene)chromium fulleride was studied for the first time from 120 to 340 K. A reversible endothermic transformation was observed between 160 and 250 K during heating; it was caused by the dissociation of the [(C₆₀)₂]²⁻ dimer and the formation of the [(η⁶-(EtOPh))₂Cr]^·+[C₆₀]^·− fulleride; its standard thermodynamic characteristics were estimated and analyzed. The experimental data were used to calculate the standard thermodynamic functions, including the heat capacity, enthalpy, entropy, and Gibbs function of the fulleride dimer from T → 0 to 160 K and the [(η⁶-(EtOPh))₂Cr]^·+[C₆₀]^·− monomeric complex over the temperature range 250–340 K. The standard thermodynamic properties of the fulleride studied, fullerides studied earlier, and fullerite C₆₀ were compared.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Thermodynamic Properties of Polyphenylquinoxaline in the Temperature Range of <Emphasis Type="Italic">T</Emphasis> → 0 to 570 K

The thermodynamic properties of amorphous polyphenylquinoxaline in the temperature range of 6 to 570 K are studied via precision adiabatic vacuum calorimetry and differential scanning calorimetry. The thermodynamic characteristics of glass transition are determined. Standard thermodynamic functions C^°_p, H°(T) ? H°(0), S°(Т) ? S°(0), and G°(T) ? H°(0) in the range of T → 0 to 570 K and the standard entropy of formation at T = 298.15 K are calculated. The low-temperature (T ≤ 50 K) heat capacity is analyzed using a multifractal model for the processing of heat capacity, fractal dimension D values are determined, and conclusions on the topological structure of the compound are drawn.     

The heat capacity and standard thermodynamic functions of Ni<Subscript>0.5</Subscript>Zr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> phosphate over the temperature range from <Emphasis Type="Italic">T</Emphasis> → 0 to 664 K

The temperature dependence of the heat capacity of crystalline nickel zirconium phosphate C°_p = f(T) was measured over the temperature range 6–664 K. The experimental data obtained were used to calculate the standard thermodynamic functions of Ni_0.5Zr₂(PO₄)₃ from T → 0 to 664 K. The standard entropy of phosphate formation from simple substances at 298.15 K was calculated from the absolute entropy of the compound. The data on the low-temperature heat capacity were used to determine the fractal dimension of Ni_0.5Zr₂(PO₄)₃ over the temperature range 30–50 K. Conclusions concerning the heterodynamic characteristics of the structure of Ni_0.5Zr₂(PO₄)₃ were drawn.     

Thermophysical properties of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimеthylacetamide mixtures with <Emphasis Type="Italic">n</Emphasis>-butanol

The refraction, dielectric, viscosity, density, data of the binary mixtures of N,N-dimethylacetamide (DMA) with n-butanol at 308.15 and 313.15 K. The measured parameters used to obtain derived properties like Bruggeman factor, molar refraction and excess static dielectric constant, excess inverse relaxation time, excess molar volume and excess viscosity, excess molar refraction. The variation in magnitude with composition and temperature of these quantities has been used to discuss the type, strength and nature of binary interactions. Results confirm that there are strong hydrogen-bond interactions between unlike molecules of DMA+ n-butanol mixtures and that 1: 1 complexes are formed and strength of intermolecular interaction increases with temperature.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

The thermodynamic properties of <Emphasis Type="Italic">bis</Emphasis>-(η<Superscript>5</Superscript>-cyclopentadienylirondicarbonyl)

The temperature dependence of the heat capacity of crystalline bis-(η⁵-cyclopentadienylirondicarbonyl) was studied over the temperature range 5–495 K in precision adiabatic vacuum and differential scanning calorimeters. The temperature dependence contained an anomaly (160–295 K) with a maximum at 250 K interpreted as a λ transition in the solid state. The fusion of the sample occurred at 435–491 K; it was accompanied by partial substance decomposition. The thermodynamic functions of crystalline bis-(η⁵-cyclopentadienylirondicarbonyl) were calculated from T→0 to 472.9 K. The enthalpy of combustion of the compound was determined in an isothermal calorimeter with a stationary bomb. The standard thermodynamic functions of its formation in the crystalline state at 298.15 K were calculated.     

Influence of the force interaction on accumulation of macroscopic correlations in elementary reaction <Emphasis Type="Italic">A</Emphasis> + <Emphasis Type="Italic">B</Emphasis> → <Emphasis Type="Italic">C</Emphasis>

The applicability of the Encounter Theory (ET) (the prototype of the Collision Theory) concepts for widely occurring diffusion assisted irreversible bulk reaction A + B →C (for example, radical reaction) in dilute solutions taking account of initial microscopic correlations and force interactions between reactants has been treated theoretically with modern many-particle method for the derivation of non-Markovian binary kinetic equations. The method shows that taking into consideration initial correlations and force interactions leads to the redefinition of the Markovian rate constant only in the expressions derived earlier. Thus, just as in the reaction A + A →C and the reaction A + B →C neglecting force and initial correlations, the Modified Encounter Theory (MET), when reduced to equations of a Regular Form, both extends the time applicability range of ET homogeneous rate equation, and yields the inhomogeneous equation of the Generalized Encounter Theory (GET). It reveals macroscopic correlations induced by the encounters in the reservoir of free walks in full agreement with physical considerations. Time accumulation of macroscopic correlations obeys the same time law as in the previously considered case neglecting force interactions. Just the rate of the process will change, according to traditional redefinition of the steady-state constant of the reaction.     

The thermodynamic properties of crystalline Sr<Subscript>0.5</Subscript>Zr<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> phosphate from <Emphasis Type="Italic">T</Emphasis> → 0 to 665 K

The temperature dependence of the heat capacity of crystalline Sr_0.5Zr₂(PO₄)₃ phosphate was studied by precision adiabatic vacuum and dynamic scanning calorimetry over the temperature range 7–665 K. The low-temperature dependence of the heat capacity was analyzed using the Debye theory of the heat capacity of solids and its multifractal generalization, which allowed conclusions to be drawn about the heterodynamic characteristics of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions of Sr_0.5Zr₂(PO₄)₃ from T → 0 to 665 K. The standard absolute entropy of Sr_0.5Zr₂(PO₄)₃ was in turn used to calculate the standard entropy of its formation from simple substances at 298.15 K.     

10<Emphasis Type="Italic">α</Emphasis>-Hydroxy-<Emphasis Type="Italic">β</Emphasis>-isomorphine,a by-product of the synthesis of 10<Emphasis Type="Italic">α</Emphasis>-hydroxymorphine

Abstract  A new compound was isolated from the reaction mixture after O-demethylation of 6-O-acetyl-10α-acetoxycodeine with boron tribromide. The structure of this compound, 10α-hydroxy-β-isomorphine, was elucidated by spectral data, and its spatial arrangement was deduced from an NOE experiment. Capillary zone electrophoresis was used for separation of morphine and its 10-hydroxy analogues. Graphical abstract        

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

Expression of a Glucose-tolerant β-glucosidase from <Emphasis Type="Italic">Humicola grisea</Emphasis> var. <Emphasis Type="Italic">thermoidea</Emphasis> in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A β-glucosidase gene (bgl4) from Humicola grisea var thermoidea was successfully expressed in Saccharomyces cerevisiae. The recombinant protein (BGL4 ^Sc ) was initially detected associated with yeast cells and later in the culture medium. BGL4 ^Sc showed optimal pH and temperature of 6.0 and 40 °C, respectively, and an apparent molecular mass of 57 kDa. The enzyme showed activity against cellobiose and synthetic substrates, and was inhibited more than 80% by Fe²⁺, Cu²⁺, Zn²⁺, and Al³⁺. Using p-nitrophenyl-β-d-glucopyranoside (pNPG) as substrate, BGL4 ^Sc presented a V _max of 6.72 μmol min⁻¹ mg total protein⁻¹ and a K _m of 0.16 mM under optimal conditions. Most important, BGL4 ^Sc is resistant to inhibition by glucose and the calculated K _i value for this sugar is 70 mM. This feature prompts BLG4 ^Sc as an ideal enzyme to be used in the saccharification process of lignocellulosic materials for ethanol production.     

Thermodynamics of a third-generation poly(phenylene-pyridyl) dendron decorated with dodecyl groups in the range of <Emphasis Type="Italic">T</Emphasis> → 0 to 480 K

The heat capacity of a glassy third-generation poly(phenylene-pyridyl) dendron decorated with dodecyl groups is studied for the first time via high-precision adiabatic vacuum and differential scanning calorimetry in the temperature range of 6 to 520 K. The standard thermodynamic functions (molar heat capacity C_p^°, enthalpy H°(T), entropy S°(T), and Gibbs energy G°(T)-H°(0)) in the range of T → 0 to 480 K, and the entropy of formation at 298.15 K, are calculated on the basis of the obtained data. The thermodynamic properties of the dendron and the corresponding third-generation poly(phenylene-pyridyl) dendrimer studied earlier are compared.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Polysaccharides from Fabaceae. V. <Emphasis Type="Italic">α</Emphasis>-Glucan from <Emphasis Type="Italic">Sophora flavescens</Emphasis> roots

Water-soluble polysaccharides from Sophora flavescens (Fabaceae) roots were studied. The dominant polymer S _f P-1-1/2 of molecular weight 85 kDa was isolated using ion-exchange and gel chromatography. The structure of the isolated compound was α-(1→4)-glucan partially substituted at the C-6 position by single glucopyranose units. A pharmacological study showed that S _f P-1-1/2 exhibited under azathioprine suppression pronounced immunostimulating activity.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.