Equilibrium Anionic Polymerization of p-lsopropyl-α-methylstyrene in Tetrahydrofuran

The equilibrium anionic polymerization of p-isopropyl-α-methylstyrene in tetrahydrofuran with potassium and sodium-naphthalene complex as initiators has been investigated in the temperature range of -20 to +20° C by use of high-vacuum techniques. The comparison of these results with those obtained previously for the equilibrium polymerization of α-methyl-styrene revealed that, because of the p- substituted bulkier isopropyl group in the monomer, the values of δG_c, the free-energy change upon the polymerization of 1 mole of liquid monomer to 1 base-mole of liquid amorphous polymer of infinite chain length, are slightly higher in the present studies. The values of ΔH_c and ΔS ^ccomputed from the plots of ΔG_c /RT versus 1/T yielded values which are lower than that for the α-methylstyrene-THF system. The effect of p-substitution is also observed in the higher values of the monomer equilibrium concentration [M] and lower values of β[β = x_ms-x_sp (V_m/V_s)].

where x_ms and x are monomer-solvent and solvent-polymer interaction parameters, respectively, and V_m /V_s is molar volume ratio of monomer to solvent. The values of x_ms for the p-isopropyl-α-methylstyrene-THF system increase regularly with increasing temperature, whereas in α-methylstyrene-THF system the increase in x^ms was not that marked     

Polymerization of p -triethylstannyl-α-methylstyrene

Summary Polymerization of p-triethylstannyl--methylstyrene was studied under 6000 atm pressure in the presence of various initiators. Polymers were isolated and their elemental composition and properties were determined.     

Octahedral Complexes in the Polymerization of α-Olefins

Summary : A series of dimethyl titanium benzamidinate complexes has been prepared containing various functional groups at the aromatic ring. These functional groups were selected to study their electronic or steric effects at the cationic metal center in the polymerization of propylene. Quantitative structure activity relationship (QSAR) studies showed that a linear relationship is observed only for the Taft Parameter (Es). Mono- and bis-benzamidinate complexes were found to produce similar polymers indicating that alike active species are obtained regardless of the starting complex. Deuterium labeled 2-D-propene showed that a new epimerization mechanism for this type of complexes is operative.     

Preparation of the Ca–diclofenac complex in solid state

Two ONNO type naphtaldehyde derivative Schiff base compounds were reduced and two symmetric phenol-amine ligands containing naphthalene groups were obtained; bis-N,N′[(2-hydroxy-1-naphtyl) methyl]-1,3-propanediamine (NAFL^H) and bis-N,N′[(2-hydroxy-1-naphtyl) methyl]-2,2′-dimetyhyl-1,3-propanediamine (NAFLDM^H). Homotrinuclear Ni(II) complexes of these ligands were prepared. The solid-state molecular structures of representative nickel complex of NAFLDM^H were determined using single crystal X-ray diffraction analysis. The terminal Ni(II) ions were found to be situated in between the donor atoms of the organic ligand. The central Ni(II) ion was observed to be bonded via two different μ-bridges. The phenolic oxygens and carboxylate ion were seen to form two different μ-bridges. TG analysis proved that the compounds have different thermal characteristics than those cited in literature. The complexes showed extreme exothermic degradation reactions in inert atmosphere. The complexes are ruptured with a two stepped exothermic reaction which appears huge heat over 300 °C. The heat appeared in O₂ atmosphere is observed to be higher than the heat appeared in inert atmosphere. Revealed heat is observed to be higher than the conventional explosive materials.     

Hydrogenation of α-methylstyrene linear dimers in the presence of Pd- and Ni-containing catalysts

Hydrogenation of α-methylstyrene linear dimers and of 4-methyl-2,4-diphenylpentane on commercial Pd-containing and Ni (GM-3 grade) catalysts was studied under the following conditions: T = 75–190°C, P(H₂) = 0.2–0.8 MPa, G _c = 2.5–10 wt %, and τ = 1–4 h.     

Luminescence of the europium(III) cryptate [Eu3+⊂2.2.1] in the solid state

The luminescence properties of solid [Eu³⁺ ⊂ 2.2.1]Cl₃·2H₂O are reported. Measurements were performed down to liquid-helium temperature. There are some striking differences between the present results and those reported earlier for the same cryptate in aqueous solution. These differences are discussed.     

Investigating the inclusion of the Ag(I)-nimesulide complex into β-cyclodextrin: studies in solution and in the solid state

The present work describes the preparation and characterization of inclusion systems involving β-CD and the silver(I) nimesulide coordination complex (Ag-NMS), prepared by kneading (K) and co-evaporation (CE) methods. Solid state characterization by DSC, XRD and IR vibrational spectroscopic measurements provided remarkable evidences of the formation of true inclusion systems. Solution measurements provided information about the inclusion mode. The UV–Vis spectroscopy was used to obtain the association constants by the Scatchard method, and the value obtained was 370 ± 2 L mol^?1. The ¹H NMR spectroscopic measurements indicate a total inclusion of the guest into the cavity. A 2D NOESY experiment was carried out for the inclusion complex. The spectrum shows that hydrogens 3–6 of the cyclodextrin clearly correlate with the protons of the phenoxy ring of nimesulide in the Ag-NMS coordination compound, which confirms the formation of the inclusion complex. The antibacterial activities of the Ag-NMS and CE-[(Ag-NMS)·β-CD] inclusion system were evaluated by the well diffusion method over Escherichia coli and Pseudomonas aeruginosa (Gram-negative) and Staphylococcus aureus (Gram-positive) pathogenic bacterial strains. The observed data shows the significant antibacterial activity of the Ag-NMS coordination complex, and no activity for the inclusion complex under the same considered conditions.     

Inclusion of Paracetamol into β-cyclodextrin nanocavities in solution and in the solid state

We report on steady-state UV-visible absorption and emission characteristics of Paracetamol, drug used as antipyretic agent, in water and within cyclodextrins (CDs): β-CD, 2-hydroxypropyl-β-CD (HP-β-CD) and 2,6-dimethyl-β-CD (Me-β-CD). The results reveal that Paracetamol forms a 1:1 inclusion complex with CD. Upon encapsulation, the emission intensity enhances, indicating a confinement effect of the nanocages on the photophysical behavior of the drug. Due to its methyl groups, the Me-β-CD shows the largest effect for the drug. The observed binding constant showing the following trend: Me-β-CD>HP-β-CD>β-CD. The less complexing effectiveness of HP-β-CD is due to the steric effect of the hydroxypropyl-substituents, which can hamper the inclusion of the guest molecules. The solid state inclusion complex was prepared by co-precipitation method and its characterization was investigated by Fourier transform infrared spectroscopy, 1H NMR and X-ray diffractometry. These approaches indicated that Paracetamol was able to form an inclusion complex with CDs, and the inclusion compounds exhibited different spectroscopic features and properties from Paracetamol.     

Ionic Polymerization of α-lsopropyl-a-methylstyrene

The polymerization of p-isopropyl-α-methylstyrene was carried out with anionic and cationic initiators. Polymers prepared in bulk through an anionic mechanism yielded narrowly dispersed products whereas those prepared with sodium-naphthalene complex in solution as well as with cationic initiators gave broad or bimodal distributions when analyzed with gel-permeation chromatography. The presence of microgels was also detected in these latter polymers and has been attributed to chain transfer reactions leading to branching and possibly crosslinking. The comparison of the proportions of different protons in these polymers, as computed from their nuclear magnetic resonance and infrared spectra, with those obtained for a polymer of regular structure suggests that reactions originating from the isopropyl group, along with substitutions on the benzene ring, are responsible for the anomalous structures.     

Thermal runaway evaluation of α-methylstyrene and trans-β-methylstyrene with benzaldehyde

Styrene is an important chemical in the petrochemical industry. In recent years, there have been sporadic releases, runaway reactions, fires, and thermal explosion accidents incurred by styrene and its derivatives worldwide. The purpose of this study was to estimate the impact of styrene and its derivatives of α-methylstyrene (AMS) and trans-β-methylstyrene (TBMS) contacting with benzaldehyde. Experiments were carried out to evaluate the thermokinetic parameters estimated by differential scanning calorimetry (DSC) and thermal activity monitor III (TAM III). TAM III was used to determine the fundamental thermokinetics under various isothermal temperatures, 80, 90 and 100°C. This autocatalytic reaction was demonstrated in thermal curves. After styrene was contacted with benzaldehyde, the exothermic onset temperature (T ₀) and the total heat of reaction (Q _total) were altered by DSC tests. When benzaldehyde is mixed with AMS and TBMS, the reaction time will be shorter but the enthalpy reduced, as revealed by TAM III tests. As AMS and TBMS, respectively, were contacted with benzaldehyde, both exothermic phenomena were changed during the reaction excursion. According to the results of this research, an operator should dictate the oxygen concentration in order to avoid any potential hazards during handling and transportation.     

Interaction of naproxen with α-, β-, and γ-hydroxypropyl cyclodextrins in solution and in the solid state

Solid combinations of naproxen with amorphous hydroxypropyl derivatives of -, -, and -cyclodextrin with an average substitution degree per anhydroglucose unit of 0.6 were investigated for thermal behaviour (differential scanning calorimetry), drug crystallinity (X-ray diffractometry), and dissolution rate (dispersed amount and rotating disc methods). Phase-solubility analysis and computer-aided molecular modelling were carried out to study the inclusion complexation of naproxen with hydroxypropyl cyclodextrins. The cavity size of the host is a selective factor for the solubilizing effect, complexing ability, and dissolution rate enhancement on naproxen, hydroxypropyl -cyclodextrin being markedly the most effective derivative. No relationship was found between the decrease in crystallinity of the drug dispersed in the amorphous carrier matrix and the geometrical features of the cyclodextrin macrocycle.     

C-C activation in the solid state in an organometallic σ-complex

Herein is reported the synthesis, by a solid-state reaction from [Ir(NBD)(2)(P(i)Pr(3))][BAr(F)(4)], of the first example of a C-C σ-complex with iridium, [Ir(BINOR-S)(P(i)Pr(3))][BAr(F)(4)]. This compound is unique in that in the solid state it undergoes reversible activation of the C-C single bond that interacts with the metal center, establishing a temperature-dependent equilibrium between Ir(III) C-C σ/Ir(V) bis-alkyl complexes. This process has been interrogated by variable-temperature X-ray diffraction, NMR spectroscopy, and DFT calculations.     

Effect of catalyst structure on the reaction of α-methylstyrene with 1,1,3,3-tetramethyldisiloxane

Reaction of α-methylstyrene with 1,1,3,3-tetramethyldisiloxane in the presence of the complexes of platinum(II), palladium(II) and rhodium(I) is explored. It is established that in the presence of platinum catalyst predominantly occurs hydrosilylation of α-methylstyrene leading to formation of β-adduct, on palladium catalysts proceeds reduction of α-methylstyrene, on rhodium catalysts both the processes take place. In the reaction mixture proceeds disproportion and dehydrocondensation of 1,1,3,3-tetramethyldisiloxane that leads to formation of long chain linear and cyclic siloxanes of general formula HMe₂Si(OSiMe₂) _n H and (-OSiMe₂-)m (n = 2–6, m = 3–7), respectively. Platinum catalysts promotes formation of linear siloxanes, while both rhodium and palladium catalysts afford linear and cyclic siloxanes as well. Structure of intermediate metallocomplexes is studied.     

The Raman spectra of tetracoordinate CdCl3X2− halogenocadmate(II) anions in the solid state

Anionic halogenocadmate(II) complexes of the type CdCl₃X²⁻ have been prepared and characterized as salts of tetrapropylammonium. The Raman spectra of these crystalline solids have been interpreted in terms of a C_3v symmetry. The tetrachlorocadmate(II) anion also possesses such a symmetry in the solid state.     

Characterization of the inclusion complex of β-cyclodextrin with sorbic acid in the solid state and in aqueous solution

Crystal structure of β-cyclodextrin (β-CD) complexes with sorbic acid, usually as food preservative, has been determined by single-crystal X-ray diffraction at 113 K. The space group of β-cyclodextrin-sorbic acid complex is P1 with unit cell dimensions of a = 15.284(3) Å, b = 15.402(3) Å, c = 17.981(4) Å, α = 99.67(3)°, β = 112.83(3)°, γ = 102.48(3)° and Z = 1. The result indicates that the β-CD molecules form head-to-head dimers which pack in the intermediate mode. Each dimer contains two guest molecules whose methyl groups are located at the dimer interface while the carboxyl groups protrude from the β-CD primary faces. Water molecules (25.5) are distributed outside the cyclodextrin cavity over 31 sites. Furthermore, nuclear magnetic resonance spectroscopy (¹H NMR) has been employed to investigate the inclusion behavior between the host β-CD and guest sorbic acid in aqueous solution. The results obtained enabled us to structurally characterize the β-CD inclusion complex with sorbic acid.     

Anionic Polymerization Behavior of α-Methylene-N-methylpyrrolidone

Anionic polymerization of α-methylene-N-methylpyrrolidone ( MMP ) was carried out in THF at −78∼0 °C with diphenylmethylpotassium (Ph₂CHK) and with diphenylmethyllithium (Ph₂CHLi) in the presence of Lewis acidic diethylzinc (Et₂Zn). Poly( MMP )s possessing predicted molecular weights based on the molar ratios between monomer and initiators and narrow molecular weight distributions (M_w/M_n < 1.1) were obtained in quantitative yields. It was demonstrated that the propagating chain end of poly( MMP ) was stable at −30 °C to form the polymers with well-defined chain structures. From the polymerizations at the various temperatures ranging from −50 to −30 °C, the apparent rate constant and the activation energy of the polymerization were estimated as follows: ln k = −6.93 × 10³/T + 25.7 and 57 ± 5 kJ mol⁻¹, respectively.     

Polymerization Mechanism of α-Linear Olefin

The density functional theory on the level of B3LYP/6-31G was empolyed to study the chain growth mechanism in polymerization process of α-linear olefin in TiCl₃/AlEt₂Cl catalytic system to synthesize drag reduction agent. Full parameter optimization without symmetryrestrictions for reactants, products, the possible transition states, and intermediates wascalculated. Vibration frequency was analyzed for all of stagnation points on the potential energy surface at the same theoretical level. The internal reaction coordinate was calculated from the transition states to reactants and products respectively. The results showed as flloes:(i) Coordination compounds were formed on the optimum configuration of TiCl₃/AlEt₂Cl.(ii) The transition states were formed. The energy di?erence between transition states and the coordination compounds was 40.687 kJ/mol. (iii) Double bond opened and Ti-C(4) bond fractured, and the polymerization was completed. The calculation results also showedthat the chain growth mechanism did not essentially change with the increase of carbon atom number of α-linear olefin. From the relationship between polymerization activation energy and carbon atom number of the α-linear olefin, it can be seen that the α-linear olefin monomers with 6-10 carbon atoms had low activation energy and wide range. It was optimum to synthesize drag reduction agent by polymerization.     

Structural diversity of isothiocyanato Cd(II) and Zn(II) Girard’s T hydrazone complexes in solution and solid state: effect of H-bonding on coordination number and supramolecular assembly of Cd(II) complex in solid state

The isothiocyanato Zn(II) complex (1) and mixed isothiocyanato/thiocyanato Cd(II) complex (2) with the condensation product of 2-acetylpyridine and trimethylammoniumacetohydrazide chloride (Girard’s T reagent) (HLCl) were investigated both experimentally and theoretically. The crystal structures of both complexes showed tridentate N₂O coordination of hydrazine ligand. In complex 1 square-pyramidal coordination surrounding of Zn(II) consists of deprotonated hydrazone ligand and two isothiocyanato ligands, while in octahedral Cd(II) complex ligand is coordinated without deprotonation as a positively charged species and coordination geometry is completed with two N-coordinated and one S-coordinated NCS^? anions. NMR spectroscopy and molar conductivity results for Cd(II) and Zn(II) complexes indicated their instability in solution. DFT calculations were performed to explain coordination preference and stability of complexes 1 and 2 in solid state and in solution. The obtained Cd(II) complex is the first reported mononuclear pseudohalide/halide Cd(II) complex with quinoline-/pyridine-based hydrazone ligands possessing octahedral geometry in solid state. In this complex, H-bonding has significant impact on coordination number and supramolecular assembly in solid state.     

Synthesis, characterisation and solid state structures of α-diimine cobalt(II) complexes: Ethylene polymerisation tests

A series of cobalt(II) compounds of the type [CoX₂(α-diimine)] were synthesised by direct reaction of anhydrous CoCl₂ or CoI₂ and the corresponding α-diimine ligand, in CH₂Cl₂: [CoI₂(o,o′,p-Me₃C₆H₂-DAB)] (1), [CoI₂(o,o′-ⁱPr₂C₆H₃-DAB)] (2), (where Ar-DAB = 1,4-bis(aryl)-2,3-dimethyl-1,4-diaza-1,3-butadiene), and [CoCl₂(o,o′,p-Me₃C₆H₂-BIAN)] (3), [CoCl₂(o,o′-ⁱPr₂C₆H₃-BIAN)] (4), and [CoI₂(o,o′-ⁱPr₂C₆H₃-BIAN)] (5) (where Ar-BIAN = bis(aryl)acenaphthenequinonediimine). All compounds were characterised by elemental analyses, IR, mass spectrometry, and X-ray diffraction whenever possible. The crystal structures of compounds 2-4 showed, in all cases, distorted tetrahedral geometries about the Co, built by two halogen atoms and two nitrogen atoms of the α-diimine ligand. Compounds 3 and 4, as well as [CoCl₂(o,o′,p-Me₃C₆H₂-DAB)] (1a), and [CoCl₂(o,o′-ⁱPr₂C₆H₃-DAB)] (2a), were activated by methylaluminoxane (MAO) and tested as catalysts for ethylene polymerisation, showing low catalytic activities. Selected polyethylene (PE) samples were characterised by ¹H and ¹³C NMR and FT-IR spectroscopies, and by differential scanning calorimetry (DSC), revealing branching microstructures (2.5-5.5%).     

Imines of α-(Thiophosphoryl)Thioketones in the Synthesis of Thiophosphorylamidovinylsulfides

Abstract

It was found that N-phenylimine of a-dithiophosphorylace-tophenone in the presence of bases undergoes the isomer-isation into the corresponding thiophosphorylamidovinil-sulphides.