季铵盐催化合成端烯丙基聚氧化烯大单体

用季铵盐作催化剂，由聚氧　化乙烯－氧化丙烯嵌段共聚物和烯丙基氯合成了端烯丙基聚氧化烯大单体，考察了催化剂及其用量，溶剂及反应温度，反应时间对反应封端率的影响，确定了最佳反应条件；与Ｗｉｌｌｉａｍｓｏｎ醚合成法比较，季铵盐催化法操作简便安全，并且可以制得封端率高的端烯丙基聚氧化烯大单体。     

茂钛催化剂间规聚苯乙烯-b-聚丙烯嵌段共聚物的合成及产物分离与表征

以茂基三正丙氧基钛［ＣｐＴｉ（Ｏ ｎ Ｐｒ）３］和改性的甲基铝氧烷（ＭＡＯ）为催化体系，用于合成间规聚苯乙烯 ｂ 聚丙烯嵌段共聚物．丙烯先预聚，然后加入苯乙烯进行嵌段共聚合反应，具有较高的催化效率（９５００ｇＰ／ｇＴｉ）．研究了丙烯预聚合时间，共聚合反应温度、催化体系组份及浓度等聚合条件对嵌段共聚合反应的影响．共聚反应总产物经沸丁酮、沸庚烷和４０℃四氢呋喃（ＴＨＦ）等溶剂的连续抽提分离，发现嵌段共聚物主要存在于沸丁酮的可溶级份中．将各分离级份用１３Ｃ ＮＭＲ、Ｘ 射线衍射和ＤＳＣ等分析手段进行结构表征并加以讨论．     

聚乙二醇/四氢呋喃三臂嵌段共聚醚的合成研究

以三臂聚乙二醇、四氢呋喃为主要原料,在三氟化硼乙醚的催化作用下进行阳离子开环聚合反应,合成了聚乙二醇-四氢呋喃三臂嵌段共聚醚.通过正交试验考察了反应时间、配料比、催化剂用量和助开环剂用量等因素对所合成的嵌段共聚醚羟值的影响,得到了合成较大相对分子质量三臂嵌段共聚醚的较佳合成条件,并采用红外光谱法、凝胶渗透色谱法、核磁共振测试对所合成的共聚醚进行了表征.     

酚酞醚砜和酰胺-酰亚胺型多嵌段聚合物

<正> 本工作合成了端羟基酚酞醚砜低聚体(H_4(i))和端羧基酰胺酰亚胺低聚体(AI_i),探索了它们与端异氰酸酯基聚氧化丙烯(I-POP-I)、端异氰酸酯基聚氧化丙烯-二甲基硅氧烷三嵌段预聚物间的多嵌段聚合反应,并对制得的低聚体和多嵌段聚合物做了初步的形态结构表征。     

等规聚苯乙烯与聚(乙烯/丙烯)嵌段共聚物的研究(Ⅱ)──嵌段共聚物的分离与表征

将配位聚合法合成的等规聚苯乙烯与聚(乙烯/丙烯)嵌段共聚反应产物进行溶剂车取分离,得到嵌段共聚物[iPS-b-Poly(E-co-P)]的含量约为总重量的20％～30％,并用¹³CNMR、FTIR、WAXD、DSC和电子显微镜进行表征．该共聚物是具有等规聚苯乙烯(iPS)与乙丙无规共聚链段结构的三元两嵌段共聚物,且iPS链段有一定的结晶度．由透射电镜可以看出,嵌段共聚物存在微相分离结构,相区尺寸在100nm数量级．     

聚丙烯-聚乙烯嵌段共聚物的分子结构及性能的研究

本工作用核磁共振(~(13)C-NMR)、示差扫描量热(DSC)、动态力学分析(DMA)和扫描电子显微镜(SEM)等技术研究了将丙烯、乙烯单体两步分段共聚、预期为聚丙烯-聚乙烯嵌段共聚物的合成物(简称为聚丙烯-聚乙烯嵌段共聚物或嵌段共聚物)。结果表明,在嵌段共聚物中含有一定量的、能为正庚烷抽提出来的乙丙无规共聚物(EPR);分段共聚的产物并非预想的PP-b-PE两嵌段共聚物,而是含有多种组分的共混物;形态表征的结果表明了嵌段共聚物为多相体系,EPR和PE形成分散相以球形无规分布于PP基体中。     

配位链转移聚合合成高密度聚乙烯-嵌段-等规聚丙烯嵌段共聚物

通过利用配位链转移聚合方法,设计"一锅两步法"合成路线合成了高密度聚乙烯-嵌段-等规聚丙烯两嵌段共聚物.双水杨醛亚胺锆催化剂/甲基铝氧烷催化体系,在二乙基锌作链转移剂的情况下,催化乙烯进行配位链转移聚合,生成双(聚乙烯基)锌并作为大分子链转移剂参与第二步由二甲基吡啶胺铪催化剂催化的丙烯等规聚合反应,最终得到高密度聚乙烯-全同聚丙烯(HDPE-b-i PP)嵌段共聚物.嵌段聚合物的分子量及分布、热性能、微结构等利用高温凝胶色谱(HT-GPC)、示差扫描量热法(DSC)、高温核磁(NMR)进行了明确表征.该类嵌段聚合物可用于增容商业料HDPE/i PP的共混物.扫描电镜(SEM)表征结果显示,通过加入10 wt%嵌段聚合物,共混物(70/30)中分散相粒子尺寸显著减小,两相界面粘结明显改善.     

氢气对负载型Z-N高效催化剂的乙烯-丙烯共聚产物链结构影响

用球形的负载型Ziegler-Natta（Z-N）高效催化剂，经丙烯均聚一乙烯丙烯气相共聚两段串联反应工艺制备的聚丙烯／乙丙共聚物（PP／EPR）合金具有优良的抗冲击性能，是聚丙烯的重要高性能化改性品种，已实现大批量生产，对这类反应器合金的结构表征和结构性能关系的研究表明，其共聚物组分中既有起弹性体作用的乙丙无规共聚物，也含有相当量的乙丙多嵌段共聚物．这种多嵌段共聚物既与无规共聚物（EPR）相容，又与PP基体相容，在合金中起相容剂作用，对材料高抗冲性能的形成起着重要作用．然而，负载型Z-N高效催化剂催化乙丙共聚合的产物结构及其影响因素至今鲜见系统的研究，调控PP／EPR合金中共聚物结构的原理尚不明确．氢气在聚烯烃生产中广泛用作分子量调节剂，在PP／EPR合金的生产中同样要用氢气调节PP和EPR组分的分子量．但是，加氢对共聚物的链结构有何影响则鲜见系统的研究．本文初步研究了用Z—N高效催化剂合成的乙丙共聚物的结构特征，着重考察了聚合体系中加入链转移剂氢气对共聚物结构的影响．     

含聚氧化乙烯嵌段的三元多嵌段共聚物的合成和性能

用聚乙二醇、聚丙二醇、遥爪羟基聚苯乙烯和二氯甲烷在氢氧化钾存在下合成了氧亚甲基连接的聚氧化乙烯－聚氧化丙烯－聚苯乙烯多嵌段聚合物；并研究其乳化性能和相转移催化性能。     

非茂钯催化剂催化乙烯/丙烯/ω-Cl-α-乙烯基单体三元共聚合的研究

本文探索了乙烯/丙烯/极性单体三元共聚物的合成方法.乙烯/丙烯/ω-Cl-α-乙烯基单体三元共聚物由于分子中引入了ω-Cl-α-乙烯基极性单体,改变了乙烯丙烯共聚物的化学惰性.我们采用催化剂Cat.L-Pd配位催化乙烯/丙烯/ω-Cl-α-乙烯基单体三元共聚合,合成了极性三元无规共聚物.探讨了催化剂结构、聚合条件对三元共聚合行为的影响,并优化了聚合条件.采用红外光谱(FTIR)、核磁共振碳谱(氢谱)(~(13)C(~1H)NMR)、示差扫描量热(DSC)和高温凝胶渗透色谱(GPC)等方法研究了共聚物的结构与性能.FTIR与~(13)C(~1H)NMR结果表明,催化剂Cat.L-Pd能够有效催化乙烯/丙烯/ω-Cl-α-乙烯基单体三元共聚合,共聚物中ω-氯代极性单体的插入量达3.6 mol%.极性单体不发生均聚合反应,但能够有效参与乙烯和丙烯的共聚合反应,形成三元无规共聚物.丙烯能够发生均聚合反应,但是不能形成聚丙烯长链段,主要发生乙烯与丙烯共聚合反应.乙烯最易发生聚合反应,并能够形成较长链段的聚乙烯.共聚物的Mw高于2×10~5g/mol.分子量分布在1.6～3.0,说明该类催化剂催化乙烯/丙烯/ω-Cl-α-乙烯基单体三元共聚合行为遵循单中心聚合机理.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.