High performance liquid chromatography separation of structurally related enkephalins on quaternary ammonium-embedded stationary phase in isocratic mode

Separation of twelve enkephalins was investigated on a quaternary ammonium-embedded stationary phase (Stability BS-C23). Variation of buffer pH of the mobile phase highlighted the complex relationship between repulsive/attractive electrostatic interactions and the reversed-phase partitioning mechanism. The effect of three different anions employed as additives (phosphate, chloride and perchlorate) was examined at various concentrations and two pH values (acidic and neutral). At pH 2.5, an increase in the anion eluent concentration resulted in a higher retention factors of positively charged enkephalins. This effect was more pronounced when perchlorate ions were added to the mobile phase rather than phosphate and chloride ions, due to chaotropic and ion-pairing effects. In contrast, at pH 7.5, retention factors of negatively charged enkephalins decreased when these salts were added, due to an anion-exchange mechanism. Perchlorate caused a sharper decrease than chloride and phosphate anions did. The results presented here provide insight into the possible adjustment of retention and separation of peptides on a mixed-mode stationary phase (BS-C23) by a careful control of the buffer pH, the nature and concentration of anions, added to the buffer, and organic modifier content.     

A weak cation-exchange monolith as stationary phase for the separation of peptide diastereomers by CEC

A CEC weak cation-exchange monolith has been prepared by in situ polymerization of acrylamide, methylenebisacrylamide and 4-acrylamidobutyric acid in a decanol-dimethylsulfoxide mixture as porogen. The columns were evaluated by SEM and characterized with regard to the separation of diastereomers and α/β-isomers of aspartyl peptides. Column preparation was reproducible as evidenced by comparison of the analyte retention times of several columns prepared simultaneously. Analyte separation was achieved using mobile phases consisting of acidic phosphate buffer and ACN. Under these conditions the peptides migrated due to their electrophoretic mobility but the EOF also contributed as driving force as a function of the pH of the mobile phase due to increasing dissociation of the carboxyl groups of the polymer. Raising the pH of the mobile phase also resulted in deprotonation of the peptides reducing analyte mobility. Due to these mechanisms each pair of diastereomeric peptides displayed the highest resolution at a different pH of the buffer component of the mobile phase. Comparing the weak-cation exchange monolith to an RP monolith and a strong cation-exchange monolith different elution order of some peptide diastereomers was observed, clearly illustrating that interactions with the stationary phase contribute to the CEC separations.     

混合色谱填料的研究进展

随着科学技术的发展,人们需要分离分析的样品越来越复杂,尤其是多肽、蛋白质类生物样品的复杂性使得单一模式色谱难以满足分离分析的要求。混合模式色谱因其独特的分离性能,可以在一次分离中获得与多维色谱相当的分离效果,而且可以避免多维色谱系统结构复杂、流动相兼容性差、分析时间长等问题,成为近年来的研究热点之一。混合模式色谱的研究重点是色谱固定相的设计与开发。混合模式色谱固定相包括反相/离子交换混合固定相、反相/亲水混合固定相、亲水/离子交换混合固定相、两性离子交换混合固定相及三相混合固定相。本文综述了近年来混合模式色谱填料的研究及应用进展,并对混合模式色谱及固定相的发展前景进行了展望。     

HPLC separation of acetaminophen and its impurities using a mixed-mode reversed-phase/cation exchange stationary phase

Determination of acetaminophen and its main impurities: 4-nitrophenol, 4'-chloroacetanilide, as well as 4-aminophenol and its degradation products, p-benzoquinone and hydroquinone has been developed and validated by a new high-performance liquid chromatography method. Chromatographic separation has been obtained on a Hypersil Duet C18/SCX column, using gradient elution, with a mixture of phosphate buffer (pH = 4.88) and methanol as a mobile phase. Analysis time did not exceed 14.5 min and good resolutions, peak shapes and asymmetries have resulted. The linearity of the method has been tested in the range of 5.0-60 μg/mL for acetaminophen and 0.5-6 μg/mL for the other compounds. The limits of detection and quantification have been also established to be lower than 0.1 μg/mL and 0.5 μg/mL, respectively. The method has been successfully applied for the analysis of commercial acetaminophen preparations.     

Nylon-6 capillary-channeled polymer fibers as a stationary phase for the mixed-mode ion exchange/reversed-phase chromatography separation of proteins

Capillary-channeled polymer (C-CP) fibers extruded from nylon-6 are used as the stationary phase for the ion-exchange/reversed-phase mixed-mode chromatographic separation of a three protein mixture. The nylon-6 C-CP fibers are packed collinearly in a 250 x 1.5-mm i.d. column with an interstitial fraction of approximately 0.6. The effects of four displacing salts at three different pHs are studied with regards to protein retention time, peak width, selectivity, and resolution for a synthetic mixture consisting of myoglobin, ribonuclease A, and lysozyme to determine the optimum mobile phase conditions. The net charge model is found to be inadequate in fully explaining the retention behavior, as the proteins are retained by anion and cation-exchange interactions, as well as hydrophobic interactions with the stationary phase. It is found that pH and displacing salt strength had a significant influence on the retention properties and resolution of the proteins.     

Comparison of zirconia- and silica-based reversed stationary phases for separation of enkephalins

In this study, the separation of biologically active peptides on two zirconia-based phases, polybutadiene (PBD)-ZrO2 and polystyrene (PS)-ZrO2, and a silica-based phase C18 was compared. Basic differences in interactions on both types of phases led to quite different selectivity. The retention characteristics were investigated in detail using a variety of organic modifiers, buffers, and temperatures. These parameters affected retention, separation efficiency, resolution and symmetry of peaks. Separation systems consisting of Discovery PBD-Zr column and mobile phase composed of a mixture of acetonitrile and phosphate buffer, pH 2.0 (45:55, v/v) at 70 degrees C and Discovery PS-Zr with acetonitrile and phosphate buffer, pH 3.5 in the same (v/v) ratio at 40 degrees C were suitable for a good resolution of enkephalin related peptides. Mobile phase composed of acetonitrile and phosphate buffer, pH 5.0 (22:78, v/v) was appropriate for separation of enkephalins on Supelcosil C18 stationary phase.     

Titania-based stationary phase in separation of ondansetron and its related compounds

Improvements in stationary phase stability have been and remain a great task for research of new stationary phases. Metal oxide-based stationary phases appear as one of perspective alternatives to classical silica based stationary phases regarding to their similar effectiveness, different selectivity, different retention mechanism and mainly better chemical and thermal stability. In this study, the retention behaviour of ondansetron and its five pharmacopoeial impurities on TiO(2)-based reversed phase was investigated. The influence of buffer type, pH and concentration on retention was studied. Different types and amount of organic solvent in mobile phase were tested. The effect of temperature and flow rate on separation was investigated. The separation conditions were optimized and developed method validated. The retention parameters - retention time (t(R)), retention factor (k'), theoretical plate number (N), resolution between peaks due to nearby peaks (R(s)) and symmetry factor (A(s)) have been compared to parameters achieved on polybutadiene-coated zirconia column. The thermodynamic parameters of retention of analysed compounds - enthalpy, entropy and Gibbs free energy - were calculated and compared to those achieved on polybutadiene-coated zirconia column. This work proves similarity of retention behaviour of ondansetron and its five related compounds on zirconia-based and titania-based stationary phases and potential utilisation of polyethylene covered TiO(2)-based reversed stationary phase as an alternative to polybutadiene-coated ZrO(2) stationary phase in pharmaceutical analysis of ondansetron.     

Preparation and evaluation of a vancomycin-immobilized silica monolith as chiral stationary phase for CEC

Enantiomeric separations in CEC with the macrocyclic antibiotic vancomycin immobilized silica monolith as a chiral stationary phase are presented. The monolithic silica capillary columns were prepared by a sol-gel process in fused-silica capillaries with an inner diameter of 50 mum and subsequently in situ immobilization of vancomycin as a chiral selector by reductive amination. Enantioselectivity was obtained for eight pairs of enantiomers in nonaqueous polar organic or aqueous mobile phases and most of them were baseline-separated with high column efficiencies. It was observed that the organic modifier ratio (MeOH/ACN) in the polar organic mobile phase played a significant role in controlling the resolution and efficiency of the enantiomers. In enantiomeric separation of propranolol, repeatability for column efficiency and resolution in the nonaqueous mobile phase was given in terms of RSD values at 1.1 and 2.3% (n = 5) for run-to-run injections and 7.2 and 9.6% (n = 5) for column-to-column testing while repeatability for the separation of thalidomide in the aqueous mobile phase was given in terms of RSD values at 1.5, 2.8% and 6.1, 10.5%, respectively.     

冠醚固定相的制备及手性拆分

以R-联萘酚为原料合成了R-(1,1′-二萘基)-20-冠-6,并将其涂敷于C18硅胶(平均粒径5μm,孔径120nm)上制成了可用于高效液相色谱手性拆分的R-(1,1′-二萘基)-20-冠-6冠醚固定相(CSP).在以pH=2的高氯酸溶液为流动相,流速为0.1mL·min-1,柱温为25℃的条件下,研究了CSP对9种α-氨基酸对映体的拆分能力.实验结果表明,有5种手性氨基酸(缬氨酸、苯甘氨酸、对羟基苯甘氨酸、谷氨酸、色氨酸)得到不同程度的拆分,说明CSP能对手性氨基酸进行一定的拆分.     

Enantioselective liquid-solid extraction for screening of structurally related chiral stationary phases

Summary An enantioselective liquid-solid batch extraction method is described for the screening of novel chiral stationary phases (CSPs) during optimization studies of chiral selectors derived form a common lead structure. Extraction enantioselectivity (α) values can be calculated from the enantiomeric excess ee-values of the selectand, which are measured in the liquid phase by enantioselective HPLC. Extraction α-values have been correlated with chromatographic α-values. The influence was studied of several experimental parameters of the assay (pH_a, buffer concentration, temperature, selector/selectand and phase ratio) on the enantiomeric excess (ee) values of the selectands and the enantioselectivity of the CSPs, respectively. The derived statistically significant model has then been implemented to predict chromatographic α-values of novel CSPs. For example, an ee of 89.3% for DNB-Leu as selectand could be achieved in batch extraction for a novel synthesized but mechanistically similarly-acting CSP derived form quinine. This corresponds to a calculated extraction α-value of 17.7. Based on this α_extraction a chromatographic α-value of 28.8 was predicted by the linear correlation model; the experimental HPLC α-value of 31.7 was in good agreement and demonstrated the validity of the proposed screening method. The method is particularly helpful in SO optimization studies.     

Alternative high-performance liquid chromatographic peptide separation and purification concept using a new mixed-mode reversed-phase/weak anion-exchange type stationary phase

This article describes a new complementary peptide separation and purification concept that makes use of a novel mixed-mode reversed-phase/weak anion-exchange (RP/WAX) type stationary phase. The RP/WAX is based on N-(10-undecenoyl)-3-aminoquinuclidine selector, which is covalently immobilized on thiol-modified silica particles (5 microm, 100 A pore diameter) by radical addition reaction. Remaining thiol groups are capped by radical addition with 1-hexene. This newly developed separation material contains two distinct binding domains in a single chromatographic interactive ligand: a lipophilic alkyl chain for hydrophobic interactions with lipophilic moieties of the solute, such as in the reversed-phase chromatography, and a cationic site for anion-exchange chromatography with oppositely charged solutes, which also enables repulsive ionic interactions with positively charged functional groups, leading to ion-exclusion phenomena. The beneficial effect that may result from the combination of the two chromatographic modes is exemplified by the application of this new separation material for the chromatographic separation of the N- and C-terminally protected tetrapeptide N-acetyl-Ile-Glu-Gly-Arg-p-nitroanilide from its side products. Mobile phase variables have been thoroughly investigated to optimize the separation and to get a deeper insight into the retention and separation mechanism, which turned out to be more complex than any of the individual chromatography modes alone. A significant anion-exchange retention contribution at optimal pH of 4.5 was found only for acetate but not for formate as counter-ion. In loadability studies using acetate, peptide masses up to 200 mg could be injected onto an analytical 250 mm x 4 mm i.d. RP/WAX column (5 microm) still without touching bands of major impurity and target peptide peaks. The corresponding loadability tests with formate allowed the injection of only 25% of this amount. The analysis of the purified peptide by capillary high-performance liquid chromatography (HPLC)-UV and HPLC-ESI-MS employing RP-18 columns revealed that the known major impurities have all been removed by a single chromatographic step employing the RP/WAX stationary phase. The better selectivity and enhanced sample loading capacity in comparison to RP-HPLC resulted in an improved productivity of the new purification protocol. For example, the yield of pure peptide per chromatographic run on RP/WAX phase was by a factor of about 15 higher compared to the standard gradient elution RP-purification protocol.     

A reversed phase/hydrophilic interaction/ion exchange mixed-mode stationary phase for liquid chromatography

A new stationary phase demonstrated effective separation towards polar analytes or their counterions within a single run.     

Streptavidin chiral stationary phase for the separation of adenosine enantiomers

In this paper, a microbore column packed with streptavidin particles was used, at various temperatures (0-24 degrees C), to separate the adenosine enantiomers by HPLC. Using an aqueous mobile phase, the apparent enantioseparation was high for a small molecule, varying from 11.5 at 0 degrees C to 6.2 at 24 degrees C. From the experiments carried out with a streptavidin-biotin complex stationary phase, it was demonstrated that the blockage of the biotin sites of the immobilized streptavidin was responsible for a strong decrease in the enantioselectivity via a direct and/or an indirect effect. From the analysis of the concentration dependencies of the solute retention factor, it was also shown that a reduction of the D-adenosine specific binding sites occurred at the lowest temperature. The thermodynamic parameters determined from the van't Hoff plots indicated that the D-adenosine binding to the streptavidin specific sites was enthalpically driven.     

Use of a polar-embedded stationary phase for the separation of tocopherols by CEC

A polar-embedded stationary phase (ULTIMA C18) has been investigated for the separation of alpha-, beta-, gamma- and delta-tocopherols by CEC in comparison with commercially available C(18) and C(30) n-alkyl RPs. The behavior of this stationary phase was tested for different mobile phases based on methanol, ACN, or mixtures thereof and different separation parameters such as retention factors and resolution were evaluated. The main feature of this stationary phase is the improved selectivity for the separation of beta- and gamma-tocopherols (positional isomers) when compared with the pure n-alkyl C(18) material, which was unable to resolve these compounds. Additionally, it is possible to observe a reversal in the elution order of the beta- and gamma-tocopherol isomers with respect to that obtained on the C(30) column. The resulting data indicate that the enhanced selectivity obtained with the polar-embedded stationary phase, with respect to the conventional C(18) material, is due to the participation of both hydrophobic and polar interactions: these latter are of the hydrogen bridge type with the amide group of the polar-embedded stationary phase, which increases the retention of the tocopherols and facilitates the discrimination between the beta- and gamma-isomers. Adequate separation of the four tocopherols was obtained by CEC using the polar-embedded stationary phase and 95:5 v/v methanol/water (5 mM Tris, final concentration) as the mobile phase.     

Ionic liquid-modified silica as a new stationary phase for chromatographic separation

A new stationary phase based on silica modified with 1-methyl-3-propylimidazolium chloride was synthesized and characterized in this paper. A derivative of 1-methyl-3-propylimidazolium chloride was used to chemically modify the surface of silica particles to act as the stationary phase for HPLC. The modified particles were characterized by Fourier Transform Infrared (FT-IR), ¹³C NMR spectroscopy and thermogravimetric analysis (TGA). The surface modification procedure rendered particles with a surface coverage of 0.89 μmol/m² of alkylimidazolium chloride. Columns packed with the modified silica and blank silica particles were tested under HPLC conditions. Preliminary evaluation of the stationary phase for HPLC was performed using aromatic compounds as model compounds. The separation mechanism appears to involve multiple interactions including ion exchange, hydrophobic and electrostatic interactions.     

Chemically induced phase separation in the preparation of porous epoxy monolith

A methodology for preparing porous epoxy monolith via chemically induced phase separation was proposed. The starting system was a mixture of an epoxy precursor, diglycidyl ether of bisphenol‐A (DGEBA), a curing agent, 4,4′‐diaminodiphenylmethane (DDM), and a thermoplastic polymer, polypropylene carbonate (PPC). As DGEBA was cured with DDM, the system became phase‐separated having PPC particles dispersed in epoxy matrix. After PPC particles were removed by thermal degradation, a porous structure was obtained. The phase separation mechanism was determined by the initial composition and illustrated by a pseudophase diagram. The pore size increased with increasing the concentration of PPC and raising the curing temperature. The intermediate and final morphologies of the system were studied using optical and scanning electron microscopy, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

2,3-di-O-methoxymethyl-6-O-tert-butyldimethylsilyl-beta-cyclodextrin, a useful stationary phase for gas chromatographic separation of enantiomers

Heptakis(2,3-di-O-methoxymethyl-6-O-tert-butyldimethylsilyl)-beta-cyclodextrin (2,3-MOM-6-TBDMS-beta-CD), synthesized by using methoxymethylchloride (MOM-Cl) as derivatization reagent, was used for capillary gas chromatographic separation of enantiomers. The new chiral stationary phase proved to be suitable for the enantiodifferentiation of volatiles from various chemical classes. Compared to the corresponding gamma-CD derivative (2,3-MOM-6-TBDMS-gamma-CD), the spectrum of compounds for which enantiomers could be separated was more limited and the enantioseparation achieved was generally less pronounced. Unusually high separation factors were observed for 2-alkyl esters of short chain acids (C2-C6). Phenomena underlying the enantioseparation of 2-pentyl acetate (alpha: 4.31; 35 degrees C) were investigated by determining thermodynamic parameters. Data show that only one enantiomer is retained significantly on the chiral stationary phase whereas the other one behaves like the hydrocarbons used as references.     

Investigations on the behaviour of acidic, basic and neutral compounds in capillary electrochromatography on a mixed-mode stationary phase

This work describes the separation of acidic, basic and neutral organic compounds as well as inorganic anions in a single run by capillary electrochromatography employing a stationary phase which exhibits both strong anion-exchange and reversed-phase chromatographic characteristics. The positive surface charge of this stationary phase provided a substantial anodic electroosmotic flow. The analytes were separated by a mixed-mode mechanism which comprised chromatographic interactions (hydrophobic interactions, ion-exchange) as well as electrophoretic migration. The influence of ion-exchange and hydrophobic interactions on the retention/migration of the analytes could be manipulated by varying the concentration of a competing ion and/or the amount of organic modifier present in the background electrolyte. Additionally the effects of pH changes on both the chromatographic interactions as well as the electrophoretic migration of the analytes were investigated.