Changing morphology of BaO/Al2O3 during NO2 uptake and release

The changes in the morphology of Ba-oxide-based NO(x)() storage/reduction catalysts were investigated using time-resolved X-ray diffraction, transmission electron microscopy, and energy dispersed spectroscopy. Large Ba(NO(3))(2) crystallites form on the alumina support when the catalyst is prepared by the incipient wetness method using an aqueous Ba(NO(3))(2) solution. Heating the sample to 873 K in a He flow results in the decomposition of the Ba(NO(3))(2) phase and the formation of both a monolayer BaO film strongly interacting with the alumina support and nanocrystalline BaO particles. Upon NO(2) exposure of these BaO phases at room temperature, small (nanosized) Ba(NO(3))(2) crystals and a monolayer of surface nitrate form. Heating this sample in NO(2) results in the coalescence of the nanocrystalline Ba(NO(3))(2) particles into large crystals. The average crystal size in the reformed Ba(NO(3))(2) layer is significantly smaller than that measured after the catalyst preparation. Evidence is also presented for the existence of a monolayer Ba(NO(3))(2) phase after thermal treatment in NO(2), in addition to these large crystals. These results clearly demonstrate the dynamic nature of the Ba-containing phases that are active in the NO(x)() storage/reduction process. The proposed morphology cycle may contribute to the understanding of the changes observed in the performances of these catalysts during actual operating conditions.     

Mesostructured gamma-Al(2)O(3) with a lathlike framework morphology

A novel three-step assembly pathway is reported for the formation of a mesostructured alumina with framework pore walls made of crystalline, lathlike gamma-Al(2)O(3) nanoparticles. In the initial supramolecular assembly step of the pathway a mesostructured alumina with a wormhole framework morphology and amorphous pore walls is assembled through the hydrolysis of Al(13) oligocations and hydrated aluminum cations in the presence of a nonionic diblock or triblock poly(ethylene oxide) surfactant as the structure-directing porogen. The walls of the initial mesostructure are then transformed in a second hydrolysis step at a higher temperature to a surfactant-boehmite mesophase, denoted MSU-S/B, with a lathlike framework made of boehmite nanoparticles. A final thermal reaction step topochemically converts the intermediate boehmitic mesophase to a mesostructure with crystalline gamma-Al(2)O(3) pore walls, denoted MSU-gamma, with retention of the lathlike framework morphology. The boehmitic MSU-S/B intermediates formed from the chloride salts of aluminum incorporate chloride anions into the mesostructure. Chloride ion incorporation tends to disorder the nanoparticle assembly process, leading to a broadening of the slit-shaped framework pores in the final MSU-gamma phases and to the introduction of intra- and interparticle textural mesopores. However, the well-ordered MSU-gamma phases made from aluminum nitrate as the preferred aluminum reagent exhibit narrow framework pore size distributions and average pore sizes that are independent of the surfactant size and packing parameter, in accord with a lathlike framework assembled from nanoparticles of regular size and connectivity. The high surface areas ( approximately 300-350 m(2)/g) and pore volumes ( approximately 0.45-0.75 cm(3)/g) provided by these mesostructured forms of gamma-Al(2)O(3) should be useful in materials and catalytic applications where the availability of surface Lewis acid sites and the dispersion of supported metal centers govern reactivity.     

Adsorption of Me-HEDP complexes onto gamma-Al2O3

This work studies the adsorption of Me-1-hydroxiethane-(1,1-diphosphonic acid) (HEDP) complex onto alumina in the pH range from 5.0 to 9.5. The extent of HEDP adsorption is not significatively affected by the presence of Me(II), while, HEDP has an interesting effect on Me(II) adsorption. At high surface covering, Cu(II) adsorption is enhanced at low pH reaching a maximum of 57% at pH nearly 6, however, at pH>6 a decrease about 20% in the amount of Cu(II) adsorbed takes place by the presence of HEDP. The model predicts a ternary surface complex (AlLCu(-)) to justify the increase of Cu(II) adsorbed at lower pH. At the lower pH and at high Zn(II) concentration the presence of equimolar concentration of HEDP also causes a discernible increase in the amount of Zn(II) adsorbed. At pH 5, the percentage of Zn(II) complexed with HEDP increased from negligible to 40% as the HEDP concentration increased. However, in this case the HEDP does not have a suppressor effect on the Zn(II) adsorption at the higher pH. Again, the presence of anionic-type complexation is here postulated to reach a good fit with the experimental results. The effect of HEDP over Zn(II) adsorption becomes less pronounced with the excess of surface sites. Cd(II)-HEDP solution complexes are weaker than those corresponding to Cu(II) and Zn(II), so competitive effects between surface and solution are much less significant in comparison to Cu(II)-HEDP and Zn(II)-HEDP alumina systems. So, the effect of HEDP on the Cd adsorption at low concentration and low pH is more stressed than in the case of Cu(II) and Zn(II). Overall, results indicate that the presence of HEDP in the aquatic systems could have a significant impact on the mobility and distribution of Cu(II), Zn(II) and Cd(II) in the environment.     

Creating mixed Fe/Al coatings on planar gamma-Al2O3 surfaces

Insufficient understanding of the interactions of reactive phases (e.g., Fe and Al oxides) with minerals, other reactive phases and sorbing species has made predicting and modeling metal sorption on natural sediment surfaces difficult. This work develops a method to create mixed Fe/Al planar oxide surfaces by coating well-characterized planar gamma-Al2O3 with ferric iron. The objective is to closely control the Fe/Al ratio as well as the distribution of Fe on the planar surface. Effects of starting Fe(III) concentration, reaction time and number of coating sequences were examined using XPS and ToF-SIMS. No observable trend was seen in Fe/Al ratios by varying the starting Fe(III) concentration or reaction time. For both 4- and 14-day reactions, lower concentrations of Fe(III) produced oxide phases with a homogeneous distribution of Fe at the surface as detected by ToF-SIMS. ToF-SIMS Fe elemental maps of the oxide phases resulting from the highest Fe(III) concentration showed areas of localized Fe deposition. A sequential coating procedure allowed for a closer control of the concentration and spatial distribution of Fe(III) in the resulting oxide phase. This work provides methodology that can be used to create Fe/Al oxide phases whose Fe/Al content can be controlled for use in subsequent sorption studies to better understand the effects of mixed phase oxides on metal ion uptake.     

Polypyrrole-Fe2O3 nanohybrid materials for electrochemical storage

We report on the synthesis and electrochemical characterization of nanohybrid polypyrrole (PPy) (PPy/Fe₂O₃) materials for electrochemical storage applications. We have shown that the incorporation of nanoparticles inside the PPy notably increases the charge storage capability in comparison to the “pure” conducting polymer. Incorporation of large anions, i.e., paratoluenesulfonate, allows a further improvement in the capacity. These charge storage modifications have been attributed to the morphology of the composite in which the particle sizes and the specific surface area are modified with the incorporation of nanoparticles. High capacity and stability have been obtained in PC/NEt₄BF₄ (at 20 mV/s), i.e., 47 mAh/g, with only a 3% charge loss after one thousand cyles. The kinetics of charge–discharge is also improved by the hybrid nanocomposite morphology modifications, which increase the rate of insertion–expulsion of counter anions in the bulk of the film. A room temperature ionic liquid such as imidazolium trifluoromethanesulfonimide seems to be a promising electrolyte because it further increases the capacity up to 53 mAh/g with a high stability during charge–discharge processes.     

Mesostructured forms of gamma-Al(2)O(3)

gamma-Al2O3 is one of the most extensively utilized metal oxides in heterogeneous catalysis. Conventional forms of this oxide typically exhibit a surface area and pore volume less than 250 m2/g and 0.5 cm3/g, respectively. Previous efforts to prepare mesostructured forms of alumina resulted only in structurally unstable derivatives with amorphous framework walls. The present work reports mesostructured aluminas with walls made of gamma-Al2O3, denoted MSU-gamma. These materials are structurally stable and provide surface areas and pore volumes up to 370 m2/g and 1.5 cm3/g, respectively. The key to obtaining these structures is the formation of a mesostructured surfactant/boehmite precursor, denoted MSU-S/B, assembled through the hydrolysis of an aluminum cation, oligomer, or molecule in the presence of a nonionic surfactant. Mesostructured, gamma-aluminas offer the possibility of improving the catalytic efficiency of many heterogeneous catalytic processes, such as petroleum refining, petrochemical processing, and automobile exhaust control.     

Density functional theoretical calculations for a Co2/gamma-Al2O3 model catalyst: structures of the gamma-Al2O3 bulk and surface and attachment sites for Co2+ ions

First-principle density functional theory (DFT) calculations on the electronic state and structure of a [Co2+]2/gamma-Al2O3 model catalyst have been performed in relation to catalysis for unique NO-CO reactions on a Co2+ ensemble/gamma-Al2O3 catalyst. The DFT calculations reveal that a bulk structure of gamma-Al2O3 is energetically most favorable when aluminum vacancies are evenly dispersed at octahedral sites, and that the (110) plane is exposed as a top-most layer by its neutrality. Two Co2+ ions on the (110) surface are supported adjacently to each other in a tetrahedral symmetry. The calculations also demonstrate that the vacant d orbitals of the two Co2+ ions are directed toward each other, which brings about an adsorbate-adsorbate interaction between two molecules which adsorb on each of the Co2+ ions. This may be an origin of the unique aspect of Co2+ ensemble/gamma-Al2O3 catalysis.     

High-resolution electron tomography study of an industrial Ni-Mo/gamma-Al2O3 hydrotreating catalyst

The growing demand for high-quality transportation fuels requires their cost-effective production by hydrodesulfurization of crude oils using heterogeneous catalysts. To study the three-dimensional (3D) structure of such a commercial, sulfided Ni-Mo/gamma-Al2O3 catalyst, electron tomography was applied. The MoS2 particles form an interconnected complex structure within the mesopores of the alumina support. Spatial organization, morphology, and orientation of the MoS2 particles in the pores were resolved with sufficient accuracy to display the 6-A-spaced MoS2 crystal planes. The proximity of the MoS2 edge planes and more loosely interacting MoS2 basal planes to the alumina support showed the presence of pores smaller than 3 nm, which was confirmed by physisorption experiments. The actual shape of the MoS2 particles cannot be described by simple models as derived from studies on model catalysts. Electron tomography is a unique tool to study the actual 3D structure of complex industrial catalysts with sub-nanometer resolution.     

Aberration-corrected STEM imaging of Ag on gamma-Al2O3.

Ag on gamma-alumina is a promising catalyst for hydrocarbon selective catalytic reduction in lean-burn gasoline and diesel engines for transportation applications. Although much is known about the mechanism of NOx reduction and the various intermediates, little agreement exists on the nature of the active silver species. In the present work, aberration-corrected STEM has provided new information about the nature of Ag on alumina both as impregnated and following treatments at various temperatures with exposure to simulated exhaust gas. Ex situ techniques have provided new insights into the evolution of Ag on alumina following exposure to temperature and simulated exhaust gas.     

The effect of Er3+ and Sm3+ on phase separation and crystallization in Na2O/K2O/BaF2/BaO/Al2O3/SiO2 glasses

Thermal annealing of Sm⁺³ or Er⁺³ doped Na₂O/K₂O/BaF₂/BaO/Al₂O₃/SiO₂ glasses led to the precipitation of nanocrystalline BaF₂. The mean crystallite sizes were in the range from 9 to 15 nm as shown by XRD line broadening. Whereas glasses without rare earth oxides showed crystallites homogenously dispersed in the amorphous matrix, those doped with 0.05 mol% ErF₃ or SmF₃ showed highly agglomerated crystals. The latter was due to droplet phase separation in the rare earth doped glasses as proved by transmission electron microscopy while in the undoped glasses phase separation did not occur. Furthermore, the size of the droplets depended on the BaO-concentration. Fluorescence emission spectra of a samarium doped sample showed higher intensities than in the glasses they were prepared from.     

Direct generation of hydrogen peroxide from formic acid and O2 using heterogeneous Pd/gamma-Al2O3 catalysts

Hydrogen peroxide formation is achieved with remarkable productivity at ambient conditions (25 degrees C and atmospheric pressure) in aqueous medium using a heterogeneous catalytic system; formic acid is decomposed in the presence of a continuous flow of O(2) over Pd/gamma-Al(2)O(3) catalyst leading to the generation of hydrogen peroxide; the addition of a negligible amount of bromide ion improves the selectivity of the reaction.     

A study of thoria on the surface of gamma-Al2O3

The dispersion of thoria on the surface of gamma-Al2O3 and the surface properties of ThO2/gamma-Al2O3 samples, as well as the influence of the loading amount of thoria on the reduction behavior of copper oxide species, have been studied using XRD, XPS, FTIR, and TPR. The results indicate that the dispersion capacity of thoria, like that of ceria, is much lower than for two other tetravalent metal oxides, zirconia and titania, and the surface adsorption amount of the carbonyl compound and H2O slightly increases with increasing thoria loading. The different thoria loadings can influence the reduction behavior of the dispersed copper oxide by comparing the TPR results of CuO/ThO2/gamma-Al2O3 samples. In addition, the lower dispersion capacities of thoria and ceria on gamma-Al2O3 are tentatively discussed by considering the structural stability of the two oxides.     

Characterization of Pd-Cu alloy nanoparticles on gamma-Al2O3-supported catalysts

Cu-Pd/Al2O3 bimetallic catalysts have been characterized by XRD, TEM, and EDX techniques. The surface structure has been investigated by FT-IR spectroscopy of low-temperature adsorbed CO in the reduced and in the oxidized state. Evidence has been provided of the formation of Cu-Pd alloy nanoparticles, both of the alpha-phase (disordered fcc) and of the beta-phase (ordered CsCl-type). IR spectra suggest that Cu likely decorates the edges while Pd mostly stays at the main faces. Part of copper disperses as Cu+ on the support even after reduction. The presence of copper seems to modify strongly the sate of oxidized Pd centers in oxidized high-Pd content materials. The redox chemistry of the system, where Pd is reduced more easily than Cu, appears to be very complex.     

BaO对Pd/Al2O3催化性能的影响

以 Pd(C2 H3O2 ) 2 为前身 ,制备了系列 Ba O- Al2 O3复合氧化物负载钯的催化剂 .用质量滴定法 ,测定了复合载体的零电荷点 (pzc) .结果表明 ,体系的 pzc随 Ba O含量的增加而增大 ,在 5 %～ 10 %之间存在一拐点 ,并与XRD所测 Ba O在 Al2 O3上的单层分散阈值相对应 .复合载体在制备中发生固相反应 ,所生成的 Ba Al2 O4可以阻止 Al2 O3的相变 ,并极大地提高载体的热稳定性 ,其中 5 % Ba O的作用最为明显 .Ba O的引入 ,增强了 Pd/Al2 O3对 CO的氧化能力 ,同时 ,提高了其热稳定性     

NO2 adsorption on BaO/Al2O3: the nature of nitrate species

Temperature programmed desorption, infrared spectroscopy, and (15)N solid state NMR spectroscopy were used to characterize the nature of the nitrate species formed on Al(2)O(3) and BaO/Al(2)O(3) NO(x) storage/reduction materials. Two distinctly different nitrate species were found: surface nitrates that are associated with a monolayer BaO on the alumina support, and a bulk-like nitrate that forms on this thin BaO layer. The surface nitrates desorb as NO(2) at lower temperatures than do the bulk-like nitrates, which decompose as NO+O(2) at higher temperatures. The amount of NO(x) stored in the monolayer nitrate is proportional to the surface area of the catalyst, while that in the bulk nitrate increases with BaO coverage.     

Untersuchungen an dem System BaO2/Fe2O3 mit Hilfe der Hahnschen Emaniermethode

Zusammenfassung Der Verlauf des Vorganges 2 BaO₂+12 Fe₂O₃–2 (BaO·6 Fe₂O₃)+O₂ wird mit Hilfe derHahnschen Emaniermethode verfolgt. Dadurch, daß in gleicher Weise auch die einzelnen Komponenten BaO₂ (Abb. I und 2) und Fe₂O₃ (Abb. 3), für sich untersucht und in den Gemischen einmal das BaO₂, das andere Mal das Fe₂O₃ radioaktiv indiziert werden, ist es möglich, die charakteristischen Merkmale dieses Reaktionstyps zu beschreiben.Mit 4 Abbildungen.     

EXAFS characterization of dendrimer-Pt nanocomposites used for the preparation of Pt/gamma-Al2O3 catalysts

Pt/gamma-Al2O3 catalysts were prepared using hydroxyl-terminated generation four (G4OH) PAMAM dendrimers as the templating agents and the various steps of the preparation process were monitored by extended X-ray absorption fine structure (EXAFS) spectroscopy. The EXAFS results indicate that, upon hydrolysis, chlorine ligands in the H(2)PtCl(6) and K(2)PtCl(4) precursors were partially replaced by aquo ligands to form [PtCl3(H2O)3]+ and [PtCl2(H2O)2] species, respectively. The results further suggest that, after interaction of such species with the dendrimer molecules, chlorine ligands from the first coordination shell of Pt were replaced by nitrogen atoms from the dendrimer interior, indicating that complexation took place. This process was accompanied by a substantial transfer of electron density from the dendrimer to platinum, indicating that the dendrimer plays the role of a ligand. Following treatment of the H(2)PtCl(6)/G4OH and K(2)PtCl(4)/G4OH complexes with NaBH4, no substantial changes were observed in the electronic or coordination environment of platinum, indicating that metal nanoparticles were not formed during this step under our experimental conditions. However, when the reduction treatment was performed with H2, the formation of extremely small platinum clusters, incorporating no more than four Pt atoms was observed. The nuclearity of these clusters depends on the length of the hydrogen treatment. These Pt species remained strongly bonded to the dendrimer. Formation of larger platinum nanoparticles, with an average diameter of approximately 10 A, was finally observed after the deposition and drying of the H(2)PtCl(6)/G4OH nanocomposites on a gamma-Al(2)O(3) surface, suggesting that the formation of such nanoparticles may be related to the collapse of the dendrimer structure. The platinum nanoparticles formed appear to have high mobility because subsequent thermal treatment in O2/H2, used to remove the dendrimer component, led to further sintering.     

BaO对Pd/Al2O3上CH4催化燃烧性能的影响

以醋酸钯为前身盐, BaO-Al2O3复合氧化物为载体制备了系列负载型钯催化剂. BET和XRD表征结果表明,复合氧化物在制备过程中发生固相反应所生成的BaAl2O4 可以阻止γ-Al2O3向α相的转变,显著增强Al2O3的热稳定性.以甲烷燃烧为模型反应的评价结果表明, BaO的引入提高了催化剂上甲烷燃烧反应的活性和稳定性.     

The effect of NaOH on the liquid-phase hydrodechlorination of dioxins over Pd/gamma-Al2O3

The effect of sodium hydroxide on the-liquid phase hydrodechlorination (LPHDC) of polychlorinated dibenzo- p-dioxins/polychlorinated dibenzofurans (PCDD/Fs) over 2% Pd/gamma-Al 2O 3 was evaluated. Reactions were carried out using 2-propanol both as a hydrogen donor and as a solvent. Fresh and used catalyst samples were characterized by BET, hydrogen chemisorption, TEM/EDS, XPS, and TPR. When the reaction mixture contained no NaOH, active-phase leaching and Pd-C formation were observed even after 10 min of reaction. Therefore, sodium hydroxide appears to be required to maintain surface metal clusters on the support and avoid binding of carbon species to the active metal. On the other hand, excess NaOH in the reaction mixture led to deposition of organic and inorganic solid residues on the catalyst surface, blocking the active sites. Under the conditions of this study, the addition of 30 mg of NaOH maintained the basicity of the system and diminished deposition of solid residues on the catalyst samples, and almost 100% detoxification was reached after a 3 h reaction.