Preparation of CuS-P(NIPAM-co-MAA)Hybrid Microgels with Controlled Surface Structures

Copper sulfide‐poly(isopropylacrylamide‐co‐methacrylic acid) [CuS‐P(NIPAM‐co‐MAA)] hybrid microgels with patterned surface structures have been synthesized by means of the polymer microgel template technique. The results showed that the surface morphology of the hybrid microgels could be regulated by controlling the decomposition of thioacetamide (TAA) in an acidic medium. The rate of precipitation and the amount of metal sulfide significantly affect the surface structures of the hybrid microgels.     

硫化物-高分子复合微球表面形貌与模板组成关系的研究

以N-异丙基丙烯酰胺(NIPAM)和甲基丙烯酸(MAA)为单体, 通过反相悬浮聚合法制备了多种MAA含量不同的阴离子型P(NIPAM-co-MAA)共聚微凝胶. 以这些共聚微凝胶为模板, 在不同表面活性剂存在下, 合成了一系列CuS(CdS、ZnS)-P(NIPAM-co-MAA)无机-有机复合微球材料, 研究了表面活性剂种类, 模板组成等因素对上述硫化物-高分子复合微球表面形貌的影响. 结果表明, 实验条件下所得复合微球表面均具有图案化结构, 该结构明显依赖于表面活性剂的种类和模板微凝胶的组成. 就模型体系而言, 随表面活性剂Span-20、Span-80和Span-85的HLB(亲水亲油平衡)值降低, 微球表面形貌趋于粗糙, 但仍然十分规整; 就模板组成而言, 模板中MAA含量增加使得复合微球的表面形貌变得更加精细. 据此, 认为通过选用合适的表面活性剂和微凝胶模板可以在一定范围内调控这些无机-有机复合微球的表面形貌, 从而为后续应用研究奠定基础.     

Ag-polymer composite microspheres with patterned surface structures

Novel silver-poly(acrylamide-co-methacrylic acid) [Ag-P(AM-co-MAA)] composite microspheres, in tens of micrometer size range, with patterned surface and core/shell structures were prepared by chemical reduction of Ag₂CrO₄-P(AM-co-MAA) composite microspheres in ethanol. Characterization with various techniques revealed that the chemical composition of the “shell” is dominated by Ag, but the “core” is dominated by the template, P(AM-co-MAA). It was also demonstrated that the surface morphology of the Ag-polymer composite microspheres is similar to that of their precursors and can be controlled to a certain extent by varying the composition of template copolymer, approaches, and amount of Ag₂CrO₄ deposited. This morphology transfer technique is also applicable for other silver salts-polymer composite microspheres. The same silver-polymer composite microspheres with very different morphology have also been prepared by utilizing this technique, but the different precursor microspheres, Ag₃PO₄-P(AM-co-MAA), were used. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Preparation of thermoresponsive core–shell polymeric microspheres and hollow PNIPAM microgels

A reliable and efficient route for preparing thermoresponsive hollow microgels based on cross-linked poly(N-isopropyl acrylamide) (PNIPAM) was developed. Firstly, monodisperse thermoresponsive core–shell microspheres composed of a P(styrene (St)-co-NIPAM) core and a cross-linked PNIPAM shell were prepared by seeded emulsion polymerization using P(St-co-NIPAM) particles as seeds. The size of the P(St-co-NIPAM) core can be conveniently tuned by different dosages of sodium dodecyl sulfate. The thickness of the cross-linked PNIPAM shell can be controlled by varying the dosage of NIPAM in the preparation of PNIAPM shell. Then, hollow PNIPAM microgels were obtained by simply dissolving the P(St-co-NIPAM) core with tetrahydrofuran. The core–shell microspheres and the hollow microgels were characterized by transmission electron microscopy, dynamic light scattering, atomic force microscopy, and Fourier-transform infrared spectroscopy.     

Synthesis and properties of organic-inorganic hybrid P(NIPAM-<Emphasis Type="Italic">co</Emphasis>-AM-<Emphasis Type="Italic">co</Emphasis>-TMSPMA) microgels

Utilizing the hydrolysis and condensation of the methoxysilyl moieties, organic-inorganic hybrid poly(N-isopropylacrylamide-co-acrylamide-co-3-(trimethoxysilyl)propylmethacrylate) P(NIPAM-co-AM-co-TMSPMA) microgels were prepared via two different methods. The first method was that the microgels were post-fabricated from the crosslinkable linear P(NIPAM-co-AM-co-TMSPMA) terpolymer aqueous solutions above the lower critical solution temperature (LCST) of the terpolymer. For the second method, the microgels were directly synthesized by conventional surfactant free emulsion copolymerization of NIPAM, AM, and TMSPMA. The hydrodynamic diameter and stability of the resultant P(NIPAM-co-AM-co-TMSPMA) microgels strongly depend on the pH and temperature of the microgel aqueous solution. The hydrodynamic diameters of the microgels decreased with increasing the measuring temperature. The phase transition temperature of the microgels was found to be around 34°C, which was independent of the initial terpolymer concentration and shifted to lower temperature with increasing the preparation temperature. Increasing the initial amount of AM will enhance the instability of the microgels at high pH values. Moreover, the P(NIPAM-co-AM-co-TMSPMA) microgels obtained from the linear terpolymer had more homogeneous microstructures as compared with the corresponding NIPAM/AM/TMSPMA microgels prepared by one step emulsion copolymerization as revealed by light scattering measurements.     

Preparation of styrene/methacrylic acid copolymer microspheres and their composites with metal particles

 Poly(styrene-co-methacrylic acid) [P(St-co-MAA)] microspheres were prepared by emulsifier-free emulsion copolymerization of St with MAA. Fourier transform IR spectroscopy and elemental analysis were used to study the change in the content of MAA in the microspheres. The results of X-ray photoelectron spectroscopy measurements indicated the presence of carboxylic functionality on the surface of the microspheres. The P(St-co-MAA) metal composite particles were prepared by chemical metal deposition. Transmission electron microscopy observation and X-ray diffraction measurement were used to study the distribution and structure of the metal particles deposited. Received: 15 September 1999 Accepted: 24 December 1999     

Preparation of styrene/acrylonitrile copolymer microspheres and their composites with metal particles

 Monodispersed poly(styrene-co-acrylonitrile) [P(St-co-AN)] microspheres were prepared by emulsifier-free emulsion copolymerization of St with AN. Fourier transform IR spectroscopy and elemental analysis were used to measure the content of AN in the poly(St-co-AN) microspheres. X-ray photoelectron spectroscopy (XPS) measurements indicated the presence of an AN unit on the surface of the microspheres. The combined results of the elemental analysis and the XPS measurements showed that the copolymer on the surface of the P(St-co-AN) particles was rich in AN compared with that in the interior of the particles. P(St-co-AN)–metal composite particles were prepared by chemical metal deposition. The addition of nickel could improve the distribution of cobalt on surface of the polymer microspheres. The preparation of polymer–bimetal composite particles was tried. Transmission electron microscopy and XRD were used to study the distribution and structure of the deposited metal particles. Received: 30 June 1999/Accepted in revised form: 16 September 1999     

多层核-壳结构P(AM-co-MAA)/W/UF复合微球制备研究

以反相悬浮聚合技术合成的丙烯酰胺(acrylamide,AM)和甲基丙烯酸(methacrylic acid,MAA)共聚高分子微凝胶P(AM-co-MAA)为模板,通过离心沉积法将微米级钨粉沉积于高分子微凝胶表面,得到具有核-壳结构的P(AM-co-MAA)/W复合微球材料;再以P(AM-co-MAA)/W复合微球为模板,通过控制甲醛和尿素的缩聚反应在模板与油/水相界面进行,制备得到了具有多层核-壳结构的高分子/钨/脲醛树脂[P(AM-co-MAA)/W/Urea-formaldehyde resin]复合微球材料.利用扫描电子显微镜(SEM)、红外(FT-IR)、X射线衍射(XRD)和热分析(TGA)等手段对复合微球进行了表征.实验结果表明,外壳层脲醛树脂的包覆量、复合微球的表面形貌可通过改变甲醛和尿素溶液的浓度、甲醛和尿素的物质的量之比等因素进行控制.复合微球的导电性测试结果表明,P(AM-co-MAA)/W复合微球表面壳层脲醛树脂包覆前后,其电导率由1.9×10-3降低为0.9×10-8S·m-1.该研究获得的三层核-壳复合微球材料其外层脲醛树脂的包覆较为完整、致密,其导电性接近于绝缘材料,为含钨复合微球作为电子元件的抗辐射涂层材料打下了基础.     

Fluorine-containing pH-responsive core/shell microgel particles: preparation,characterization, and their applications in controlled drug release

A kind of novel fluorine-containing pH-responsive core/shell microgels poly(DMAEMA-co-HFMA)-g-PEG were prepared via surfactant-free emulsion polymerization using water as the solvent. The well-defined chemical structure of the copolymers was characterized by FTIR, ¹H-NMR, ¹⁹F-NMR, and elemental analysis. The microgel particles were studied by florescence probe technique, dynamic light scattering, and zeta potential measurement; the microgels displayed a significant pH-responsive behavior. Furthermore, the cytotoxicity assay indicated that the copolymer microgels had low toxicity, and 5-FU-loaded microgels offered a certain killing potency against cancer cells. In addition, the drug loading and in vitro drug release demonstrated that 5-FU was successfully incorporated into polymeric microgels, and the drug-loaded microgels showed a marked pH-dependent drug release behavior. This study suggests that the poly(DMAEMA-co-HFMA)-g-PEG microgels play an important role in the release mechanism stimulated by the change in the pH and have potential applications as a controlled drug release carrier.     

Preparation of hollow composite spheres with raspberry‐like structure based on hydrogen‐bonding interaction

The hollow composite spheres with a raspberry‐like structure were prepared by a self‐assemble heterocoagulation based on the inter‐particle hydrogen‐bonding interaction between the amide groups of hollow poly (N,N′‐methylenebisacrylamide‐co‐N‐isopropyl acrylamide) (P(MBA‐co‐NIPAAm)) microspheres and the carboxylic acid groups of poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA)) nanoparticles, in which P(EGDMA‐co‐MAA) nanoparticle acted as the corona and the hollow P(MBA‐co‐NIPAAm) microsphere behaved as the core. The control coverage of the corona particles on the surface of hollow core microspheres of P(MBA‐co‐NIPAAm)/P(EGDMA‐co‐MAA) hollow composite sphere was studied in detail through adjustment of the mass ratio between the core and corona particles. The effect of the pH on the stability of the raspberry‐like hollow spheres was investigated. The polymer particles and the resultant heterocoagulated raspberry‐like hollow spheres were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Copyright © 2008 John Wiley & Sons, Ltd.     

Polypyrrole/poly(N‐isopropylacrylamide‐co‐acrylic acid) thermosensitive and electrically conductive composite microgels

The electrically conductive polypyrrole/dodecylbenzene sulfonic acid/poly(N‐isopropylacrylamide‐co‐acrylic acid) (PPy/DBSA/poly(NIPAAm‐co‐AA)) composite microgels were synthesized by a chemical oxidation of pyrrole in the presence of DBSA as the primary dopant, and poly(NIPAAm‐co‐AA) microgels as the polymeric codopant and template, in which APS was used as the oxidant. It was proposed to prepare “intelligent” polymer microgel particles containing both thermosensitive and electrically conducting properties. The polymerization of pyrrole took place directly inside the microgel networks, leading to formation of composite microgels and the morphology was observed by transmission electron microscope. PPy particles interacted strongly with microgels, as the acid groups of microgels acted as the polymeric codopant. The composite microgels thus formed showed electrically conducting behavior dependent on humidity and temperature. At temperatures lower than lower critical solution temperature, the conductivity decreased with increasing the humidity and a small hysteresis phenomenon was observed. The hysteresis became indistinct when temperature was near volume phase transition temperature. However, after the treatment of high temperature and high humidity, the conductivity increased surprisingly due to the structure reorganization inside the composite microgels. The distinctive functionality of the PPy composite microgels was expected to be utilized in many attractive applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1648–1659, 2006     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Thermosensitive and control release behavior of poly (N‐isopropylacrylamide‐co‐acrylic acid) latex particles

In this work, poly(N‐isopropylacrylamide‐co‐acrylic acid) (poly(NIPAAm‐AA)) copolymer latex particles (microgels) were synthesized by the method of soapless emulsion polymerization. Poly(NIPAAm‐AA) copolymer microgels have the property of being thermosensitive. The concentration of acrylic acid (AA) and crosslinking agent N,N′‐methylenebisacrylamide were important factors to influence the lower critical solution temperature (LCST) of poly(NIPAAm‐AA) microgels. The effects of AA and crosslinking agent on the swelling behavior of poly(NIPAAm‐AA) microgels were also studied. The poly(NIPAAm‐AA) copolymer microgels were then used as a thermosensitive drug carrier to load caffeine. The effects of concentration of AA and crosslinking agent on the control release of caffeine were investigated. How the AA content and crosslinking agent influenced the morphology and LCST of the microgels was discussed in detail. The relationship of morphology, swelling, and control release behavior of these thermosensitive microgels was established. A new scheme was proposed to interpret the control release of the microgels with different morphological structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5734–5741, 2008     

Non‐Thermoresponsive Decanano‐sized Domains in Thermoresponsive Hydrogel Microspheres Revealed by Temperature‐Controlled High‐Speed Atomic Force Microscopy

Despite the tremendous efforts devoted to the structural analysis of hydrogel microspheres (microgels), many details of their structures remain unclear. Reported in this study is that thermoresponsive poly(N‐isopropyl acrylamide) (pNIPAm)‐based microgels exhibit not only the widely accepted core–shell structures, but also inhomogeneous decanano‐sized non‐thermoresponsive spherical domains within their dense cores, which was revealed by temperature‐controlled high‐speed atomic force microscopy (TC‐HS‐AFM). Based on a series of experiments, it is concluded that the non‐thermoresponsive domains are characteristic for pNIPAm microgels synthesized by precipitation polymerization, and plausible structures for microgels prepared by other polymerization techniques are proposed.     

Preparation and characterization of three types of cefquinome-loaded microspheres

The polymers of poly (lactic-co-glycolic acid), gelatin, and ethyl cellulose were used to control the microscopic structure of microspheres prepared by spray drying. We investigated controlled release by varying material concentrations, sprayer inlet temperatures and air velocities, and optimized process parameters of yield, particle size, and distribution. Three types of polymeric microspheres with a mean particle size range of 13–25?µm were loaded with cefquinome and characterized. In vitro drug release studies determined that microspheres were the most suitable structures for controlling release due to their high entrapment capacities and release times greater than 24?h.     

Glucose sensitive poly (<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microgel based etalons

Thermoresponsive microgels have been shown to be an excellent platform for designing sensor materials. Recently, poly (N-isopropylacrylamide)-co-acrylic acid (pNIPAm-co-AAc) microgel based etalon materials have been described as direct sensing materials that can be designed to have a single, unique color. These color tunable materials show immense promise for sensing due to their spectral sensitivity and bright visual color. Here, we describe a proof-of-concept for etalon sensing of glucose. We found that aminophenylboronic acid (APBA)-functionalized pNIPAm-co-AAc microgels in an etalon respond to 3 mg/mL glucose concentrations by red shifting their reflectance peaks by 110 nm up to 150 nm. Additionally, APBA-functionalized pNIPAm-co-AAc microgels have a depressed volume phase transition temperature at 18–20 °C, which shifts to 24–26 °C after glucose binding. We also demonstrate that these materials show a marked visual color change, which is a first step towards developing direct read-out sensor devices.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Preparation of polyvinylpyrrodione microspheres by dispersion polymerization

The preparation of polyvinylpyrrolidone (PVP) microspheres in ethyl acetate by dispersion polymerization with N-vinylpyrrolidone (NVP) as initial monomer, poly(N-vinylpyrrolidone-co-vinyl acetate) (P (NVP-co-VAc)) as dispersant, and 2, 2′-azobisisobutyronitrile(AIBN) as initiator is reported. The influences of monomer concentration, dispersant concentration and initiator concentration on the size of PVP microspheres as well as the monomer conversion were studied. The structure and properties of PVP microspheres were analyzed. The results show that the prepared PVP microspheres have a mean diameter of 3-4 μm. With an increase in NVP concentration, the size and the molecular weight of the PVP microspheres as well as the monomer conversion all increase. With increasing P(NVP-co-VAc) concentrations, the PVP molecular weight and monomer conversion both increase while the size of the microspheres becomes smaller. As the concentration of AIBN increases, the microsphere size and monomer conversion increase whereas the PVP molecular weight decreases. The PVP prepared by dispersion polymerization has a crystal structure, and its molecular weight is lower compared to that prepared by solution polymerization. __________ Translated from Acta Polymerica Sinica, 2007, 11 (in Chinese)     

Superabsorbent poly(acrylamide-co-itaconic acid) hydrogel microspheres: Preparation,characterization and absorbency

Poly(acrylamide-co-itaconic acid) (P(AM-co-IA)) hydrogel microspheres were prepared via inverse suspension polymerization method. DLS results showed the formation of the monodispersed hydrogel microspheres. The size of the hydrogel microspheres could be controlled by polymerization parameters. Absorbencies of P(AM-co-IA) microspheres in water and saline were investigated and calculated by size changes of each particle before and after swelling. The results showed that P(AM-co-IA) had high absorbencies, the weight of swollen particles was above 4000 times to that of the original dried microspheres. The superabsorbent hydrogel microspheres might find the potential applications in the fields of soil amendments, water shutoff agents, and drug delivery carriers.     

表面图案化磁性复合微球的原位制备与表征

采用反相悬浮聚合法合成了丙烯酸(AA)含量不同的N-异丙基丙烯酰胺-丙烯酸共聚物P(NIPAM-co-AA)微凝胶, 并以其作为微反应器, 通过原位外源沉积法制备了一系列微米级、表面具有图案化结构的SiO₂-Fe₃O₄-P(NIPAM-co-AA)磁性复合微球. 实验结果表明, 复合微球的表面结构与微凝胶的组成、Fe₃O₄和SiO₂的沉积量有关. 在微球表面进行修饰, 可得到表面带有氨基等官能基团的磁性复合材料. 将这种功能化磁性微球用于识别生物大分子并进一步用于生物医学领域具有重要的意义.