Ion-Pair Chromatography of Metal Complexes of Unithiol in the Presence of Quaternary Phosphonium Salts

The chromatographic behavior of heavy-metal (Pb, Cd, Cu, Hg, and Ni) complexes of unithiol was studied by ion-pair reversed-phase chromatography using new ion-pair reagents: tetrabutylphosphonium and tributylhexadecylphosphonium bromides. The dependence of the retention of metal unithiolates on the nature and concentration of ion-pair reagents, concentrations of an organic solvent and inorganic salts in the mobile phase, and the pH of the mobile phase was studied. It was found that the retention of complexes increases upon increasing the hydrophobicity and concentration of the ion-pair reagent and upon decreasing the concentrations of acetonitrile and inorganic salts (NaClO₄ and NaNO₃). Optimal conditions of the separation of Pb, Cd, Cu, Hg, and Ni unithiolates were selected, and the possibility of their separate determination in a mixture was demonstrated. Concentrations of metals in process water were determined.     

Synthesis of chromogenic crown ethers and liquid—liquid extraction of alkaline earth metal ions

New crown ether dyes carrying two pendent anionic side-arms were synthesized for the extraction-spectrophotometry of alkaline earth metal ions. In the extraction of alkaline earth metal ions by these dianionic reagents, size recognition by the crown ether ring was more remarkable than in the case of alkali metal ion extraction by a similar type of monoanionic reagents. Dramatic changes in metal selectivity were observed when the nature of the anionic side-arm was changed while the crown ether skeleton was kept the same. The structure/selectivity relationship is discussed in terms of “chelate” and “intramolecular ion-pair” formation. Typically, when the basicity of the pendent anions was relatively high and a six-membered chelate was structurally possible for the pendent anions and the crown-bound metal, the extraction of calcium was favored by up to a factor of 3000 in the ratio of the Ca/Ba extraction constants for reagents of the diaza-18-crown-6 type. In contrast, the reagents which had pendent anions with only poor coordination ability for metal ions seemed to form complexes of the ion-pair type, and calcium ion was 10⁵ times less extractable than barium ion for the same diaza-18-crown-6-skeleton. Strontium ion seemed to be extracted most effectively when the extracted complex assumed properties intermediate between the chelate and intramolecular ion-pair.     

Ion-Pair Solvent Extraction of EDTA Anions with Tetraalkylammonium Ions in Various Organic Solvents

The ion-pair solvent extraction behavior of ethylenediaminetetraacetate (EDTA) anion by various tetraalkylammonium ions was investigated at 25.0 ± 0.1°C. The extraction of EDTA exceeded 90% from the basic aqueous solution into the organic solvents such as n-hexane and benzene derivatives containing tri-n-octylmethylammonium chloride, but EDTA was hardly extracted from acidic solution. Among the chemical species of EDTA in aqueous solution, edta ⁴⁻ is the most extractable one. On the other hand, the extraction of EDTA was less than 1% into chloroform and 1,2-dichloroethane even from the basic aqueous solution. The effect of the structure of alkylammonium ion was also examined. Tetra-n-hexylammonium and tetra-n-octylammonium ions could not extract EDTA even from the basic aqueous solution, while the use of tri-n-octylmethylammonium and di-n-lauryldimethylammonium ions enhances the extraction of EDTA. These results suggest that the steric hindrance in the ion-pair of alkylammonium and EDTA anion in the organic phase affects the extractability of EDTA containing ion-pair. The solution structure of ion-pair in the organic phase was calculated by MMFF force field and the steric effect in the ion-pair was also suggested. From the extraction constants obtained, the possibility of the extraction separation of EDTA has been shown.     

Determination of perchlorate in river by ion-pair hollow-fiber liquid-phase microextraction coupled with electrospray ionization tandem mass spectrometry

This paper describes the analysis of perchlorate (ClO₄⁻) in surface water samples by a rapid and reliable ion-pair hollow-fiber liquid-phase microextraction (HF-LPME) method coupled with flow-injection electrospray ionization tandem mass spectrometry (ESI-MS-MS) technique. The effects of the type and concentration of ion-pairing reagents, extraction time, temperature and pH value on the quantitative extraction of perchlorate by ion-pair HF-LPME were investigated and optimized. Di-n-hexyl ammonium acetate (DHAA) was employed to form an extractable ion-pair complex with aqueous perchlorate. The characteristic ions [ClO₄-ClO₄-DHA]⁻ at m/z 384.6 and 386.7 were observed in the ESI negative-ionization mode. The predominant product ions [ClO₄]⁻ at m/z 99 and 101 were used for quantitation and to maximize the detection selectivity and sensitivity. The limit of detection (LOD) was 0.5 μg/L. The reliability and precision of the standard addition method of ion-pair HF-LPME for the determination of trace levels of perchlorate in surface water were demonstrated.     

Reversed-phase thin-layer chromatography of 2-substituted benzoic acids with ammonium compounds as ion-pair reagents

Summary The retention behaviour of some substituted benzoic acids was tested on reversed-phase pre-coated plates in the presence of ammonium bromide and various tetraalkylammonium compounds with different alkyl chain lengths.It could be shown that the R_f values of the test compounds decrease in the absence and in the presence of ion-pair reagents with increasing water content of the eluent. The R_f values of the strongly acidic substituted benzoic acids decrease with both increasing concentration of the ion-pair reagent and with increasing chain length of the tetraalkylammonium compounds.Changing the inorganic counter-ions had no real influence on the separation and the size of R_f values when using tetramethylammonium compounds as ion-pair reagents.     

Ion-Pair Solvent Extraction of EDTA Anions with Tetraalkylammonium Ions in Various Organic Solvents

Summary.  The ion-pair solvent extraction behavior of ethylenediaminetetraacetate (EDTA) anion by various tetraalkylammonium ions was investigated at 25.0 ± 0.1°C. The extraction of EDTA exceeded 90% from the basic aqueous solution into the organic solvents such as n-hexane and benzene derivatives containing tri-n-octylmethylammonium chloride, but EDTA was hardly extracted from acidic solution. Among the chemical species of EDTA in aqueous solution, edta ⁴⁻ is the most extractable one. On the other hand, the extraction of EDTA was less than 1% into chloroform and 1,2-dichloroethane even from the basic aqueous solution. The effect of the structure of alkylammonium ion was also examined. Tetra-n-hexylammonium and tetra-n-octylammonium ions could not extract EDTA even from the basic aqueous solution, while the use of tri-n-octylmethylammonium and di-n-lauryldimethylammonium ions enhances the extraction of EDTA. These results suggest that the steric hindrance in the ion-pair of alkylammonium and EDTA anion in the organic phase affects the extractability of EDTA containing ion-pair. The solution structure of ion-pair in the organic phase was calculated by MMFF force field and the steric effect in the ion-pair was also suggested. From the extraction constants obtained, the possibility of the extraction separation of EDTA has been shown. Present address: Chemistry Department, Heilongjiang University, Harbin, China     

Extraction of protactinium(V) with 2-thenoyltrifluoroacetone from strongly acidic solutions

The extraction of Pa(V) from strongly acidic solutions of mineral acids is carried out with benzene solution of thenoyltrifluoroacetone. To interpret the data obtained, two extraction mechanisms representing the descending and ascending parts of the extraction curves are suggested. At lower acidity, the formation of PaO(TTA)₃·HTTA species predominates. In going to higher acidity, an ion-pair formation between anionic protactiniuminorganic complex species and H₂ TTA⁺ cation is assumed.     

缓冲盐类型和离子对试剂非对离子对强离解酸性化合物离子对反相液相色谱保留行为的影响

在离子对反相液相色谱(IP-RPLC)分析中,溶质保留受对离子(counter ion)的影响比较受人关注,但鲜有研究流动相中缓冲盐类型和离子对试剂中非对离子(non-counter ion)对溶质保留行为的影响。鉴于此,该文以14种磺酸化合物为研究对象,甲醇为有机调节剂,分别考察了3种缓冲盐体系(磷酸二氢铵、氯化铵和乙酸铵)和5种离子对试剂体系(四丁基溴化铵、四丁基磷酸二氢铵、四丁基硫酸氢铵、四丁基硝酸铵和四丁基乙酸铵)下强离解酸性化合物的IP-RPLC保留行为,通过比较不同流动相条件下得到的溶质log k_w(100%水相作流动相时的保留因子)、S(线型溶剂强度模型线性回归得到的常数),以及CHI(色谱疏水指数,log k_w/S),寻找保留行为规律。研究表明,流动相中的缓冲盐类型和离子对试剂非对离子均会影响化合物的log k_w和S值,所有化合物在氯化铵缓冲盐体系下具有最大的log k_w值。相对于无机阴离子,离子对试剂中弱离解性有机阴离子(乙酸根)的存在有利于增加磺酸化合物的S值。通过对比不同条件下的保留行为,推测磺酸化合物的IP-RPLC保留机理中同时存在着离子对模型和动态离子交换模型。与log k_w和S值不同,化合物的CHI值受缓冲盐类型以及离子对试剂非对离子的影响较弱。此外,研究发现化合物的表观正辛醇/水分配系数(log D)与log k_w、S、CHI之间均具有良好的线性相关性。不同缓冲溶液和不同离子对试剂非对离子条件下获得的log k_w和S值存在着一定的差异,而CHI值相对稳定,因此,CHI更适用于IP-RPLC中定量结构-保留行为关系模型的建立。     

Search for plant-induced technetium species with size-exclusion and reversed-phase ion-pair chromatography

In this work an attempt is made to have a closer look at technetium species (TcX) induced by spinach plants, grown on TcO _? ⁴ containing nutrient solutions. To this end, size-exclusion chromatography (SEC) and reversed-phase ion-pair chromatography (RP-IPC) were used: The performance was established with model compounds, i.e., anionic Tc-DTPA and cationic Tc-cyclam, used as mimics for TcX. Under the conditions applied, the information retrieved from high performance RP-IPC was minimal due to strong interactions of the technetium species with the Nucleosil C18 stationary phase. However, in low-pressure SEC non-size effects allowed differentiation of TcX into two distinct classes of technetium compounds, i.e., TcX₁ and TcX₂. From retention behavior in SEC, it was possible to speculate on the chemical properties of these two technetium species.     

The extraction of copper(I), lead(II) and tin(IV) from hydrochloric acid by solutions of tetra-n-hexylammonium chloride in ethylene dichloride

Copper(I) is strongly extracted from chloride media as the ion-pair NR₄+CuCl₃-by solutions of tetra-n-hexylammonium chloride (NR₄+Cl-) in ethylene dichloride. The distribution coefficient decreases from ca. 100 in 1 M chloride but is still as high as 13 in 10 M chloride. The extraction of lead(II) is shown to be due to the partition of the ion-pair (NR₄+PbCI₃-). The percentage of 0.0018 M lead extracted is 98% from 0.58 M hydrochloric acid and falls to 38% from 7.8 M acid. The distribution coefficient decreases rapidly with the total lead concentration. The extractions of tin(IV) increased to a maximum of 99.5% in ca. 5 M hydrochloric acid but decreased rapidly above 6 M acid. It proved impossible to identify the extractable species.     

Retention parameters of some isomeric 2-benzoylbenzoic acids in reversed-phase ion-pair high performance thin-layer and column chromatography

Summary The 2-benzoylbenzoic acid series was investigated by reversed-phase, high-performance, thin-layer and column chromatography using various alkylammonium salts and di(2-ethylhexyl)orthophosphoric acid as polar associating reagents. The effects of the individual substituents on retention were quantified by log k and R_M values. The compounds investigated differing in molecular structure (hydrophilic and hydrophobic substituents) commonly occurring groups in drugs and biologically active substances provide information on molecular interaction in these ion-pair systems. The combined effects on retention of organic modifier and ion-pair reagent concentration were investigated.     

Intensified extraction of ionized natural products by ion pair centrifugal partition extraction

The potential of centrifugal partition extraction (CPE) combined with the ion-pair (IP) extraction mode to simultaneously extract and purify natural ionized saponins from licorice is presented in this work. The design of the instrument, a new laboratory-scale Fast Centrifugal Partition Extractor (FCPE300^®), has evolved from centrifugal partition chromatography (CPC) columns, but with less cells of larger volume. Some hydrodynamic characteristics of the FCPE300^® were highlighted by investigating the retention of the stationary phase under different flow rate conditions and for different biphasic solvent systems. A method based on the ion-pair extraction mode was developed to extract glycyrrhizin (GL), a biologically active ionic saponin naturally present in licorice (Glycyrrhiza glabra L., Fabaceae) roots. The extraction of GL was performed at a flow rate of 20 mL/min in the descending mode by using the biphasic solvent system ethyl acetate/n-butanol/water in the proportions 3/2/5 (v/v/v). Trioctylmethylammonium with chloride as a counter-ion (Al336^®) was used as the anion extractant in the organic stationary phase and iodide, with potassium as counter-ion, was used as the displacer in the aqueous mobile phase. From 20 g of a crude extract of licorice roots, 2.2 g of GL were recovered after 70 min, for a total process duration of 90 min. The combination of the centrifugal partition extractor with the ion-pair extraction mode (IP-CPE) offers promising perspectives for industrial applications in the field of natural product isolation or for the fractionation of natural complex mixtures.     

Determination of linear alkylbenzene sulfonates by ion-pair solid-phase extraction and high-performance liquid chromatography

In this paper, the potential use of multiwalled carbon nanotubes (MWCNTs) as solid phase extraction (SPE) adsorbent was evaluated for preconcentration of linear alkylbenzene sulfonates (LAS) using ion-pair (IP)-SPE with tetrabutylammonium hydroxide (TBAH). The LAS homologues present in the aqueous sample were ion-paired with TBAH and the solution was passed through the MWCNT cartridges. The analytes retained in the cartridge were eluted with methanol and the concentrated methanol extract was analysed by HPLC-UV. In order to obtain the satisfactory recovery of LAS homologues, various parameters including the type and amount of the ion-pair reagents, the desorption and enrichment conditions such as the effect of eluent and its volume, pH, the flow rate, the ultrasonic time of sample, and the volume of sample solution were systematically optimized. Under the optimal conditions, LAS homologues could be easily extracted by the proposed SPE cartridge. The favorable limits of detection (LOD) for LAS homologues were in the range from 0.02 to 0.03 μg L⁻¹, and the relative standard deviations (RSDs) were 1.55-2.54% for 10 μg L⁻¹ LAS (n = 6). The proposed method has been successfully applied for the analysis of LAS homologues in aqueous environmental samples. A comparison study with ion-pair solid extraction on MWCNTs, C8 and C18 as adsorbents for LAS demonstrated that ion pair-based solid extraction on MWCNTs adsorbent was advantageous over C8 and C18, the widely used traditional adsorbents.     

Retention study of inorganic and organic selenium compounds on a silica-based reversed phase column with mixed ion-pairing reagents

Summary Separation of seven inorganic and organic selenium compounds, namely selenic acid [Se(VI)], selenous acid [Se(IV)], trimethylselenonium iodide (TMSe⁺), selenocystine (SeCys), selenomethionine (SeMet), selenoethionine (Seet), and selenocystamine (SeCM), has been performed on a LiChrosorb C 18 column by using mixed ion-pair reagents; 1-butanesulfonic acid and tetramethylammonium hydroxide. Flame atomic absorption spectrometry (FAAS) was used as an element-specific detector. The retention behaviors of selenium compounds in terms of several chromatographic parameters, such as pH of the mobile phase, the concentrations of ion-pair reagents, and the content of organic modifier (methanol) were investigated. It was found that the separation of both inorganic and organic selenium compounds can be achieved within 12 min with a mobile phase of 10 mM 1-butanesulfonic acid −4 mM tetramethylammonium hydroxide −4 mM malonic acid −0.05% methanol adjusted to pH 4.5 at a flow rate of 1.0 mL min⁻¹. The results obtained in this study showed that the use of mixed ion-pair reagents is very useful to improve the separation of selenium compounds. The applicability of this technique for the speciation of selenium compounds in real samples was demonstrated by the determination of selenium compounds in a selenium nutritional supplement. The results were found to be in good agreement with those obtained by ion-exchange HPLC-ICP-MS.     

Ion-pair extraction of carbanilate local anaesthetics from biological materials

Pentacaine, heptacaine and carbisocaine, new local anaesthetics of Czechoslovak origin, are weak bases of the carbanilate type. Their pK_A values are 8.6, 8.9 and 8.8, respectively. The technique of ion-pair extraction was found to be more effective than usual access using the extraction of nonionized species. The counter-ion ClO₄ was chosen as the most efficient. The extraction yield of pentacaine into benzene from strongly acidic media (IN HClO₄) of biological matrix after subsequent scrubbing of coextracted metabolites into a buffer of pH 9.6 is over 90%. The radiochemical purity is better than 92%.     

The Use Of Soft Acid Metal Salts Of Carboxylic Acids For Retention Of Hydrophilic Peptides In Reversed-Phase High Performance Liquid Chromatography

Abstract

The effect of various soft acid cation acetate salts on the retention of the peptides Phe-(Gly)_n, where n=1–4, and on phenylalanine, indicates a correlation between the softness character of the cation of the acetate salt used in the mobile phase and retention in reversed-phase high performance liquid chromatography. Inorganic soft acid cation salts did not exhibit the same increased retention properties. By using silver(I) valerate or silver(I) octanoate as ion-pairing reagents in the mobile phase for RP-HPLC, static retention of peptides was achieved.     

Non-chromatographic screening method for the determination of mercury species. Application to the monitoring of mercury levels in Antarctic samples

A simple non-chromatographic method for the determination of mercury (Hg²⁺), methylmercury (MeHg⁺), dimethylmercury (Me₂Hg), and phenylmercury (PhHg⁺) employing atomic fluorescence spectrometry (AFS) as detection technique was developed. Mercury species showed a particular behavior in the presence of several reagents. In a first stage SnCl₂ was employed for Hg²⁺ determination; in a second step, [Hg²⁺ + PhHg⁺] concentration was determined using SnCl₂ and UV radiation. MeHg⁺ decomposition was prevented adding 2-mercaptoethanol. In a third stage, [Hg²⁺ + PhHg⁺ + MeHg⁺] concentration was determined using K₂S₂O₈. Finally, the four species were determined employing NaBH₄. Reagents concentration and flow rates were optimized. The extraction technique of mercury species involved the use of 2-mercaptoethanol as ion-pair reagent. The limits of detection for Hg²⁺, PhHg⁺, MeHg⁺, and Me₂Hg were 1, 40, 68, and 99 ng L⁻¹ with a relative standard deviation of 1.5, 3.1, 4.7 and 5.8%, respectively. Calibration curve was linear with a correlation factor equal to 0.9995. The method was successfully applied to the determination of the mercury species in two Antarctic materials: IRMM 813 (Adamussium colbecki) and MURST-ISS-A2 (Antarctic Krill).     

表阿霉素及其相关物质在反相离子对色谱中的色谱行为

以表阿霉素及其6种相关物质为研究对象,系统评价了其在反相离子对色谱模式下的色谱行为.分别考察了流动相中有机相种类、有机相比例、水相中离子对试剂浓度、pH值对表阿霉素及其相关物质的影响.结果表明,使用乙腈作为有机相洗脱能力及分离效果优于甲醇,保留时间随乙腈比例增大而减小;随着离子对试剂十二烷基硫酸钠浓度增加,杂质阿霉素酮及柔红霉酮几乎无影响,其他5种物质保留时间增加.同时,表阿霉素及其杂质的保留行为受流动相pH值影响较大,当pH不高于4时可获得较好的分离效果.通过对表阿霉素及其相关物质反相离子对模式下的保留行为进行了系统的评价和定量描述,研究结果将有助于该类化合物液相色谱分离方法的发展.     

Reversed-phase high-performance liquid chromatography of amphoteric beta-lactam antibiotics: effects of columns, ion-pairing reagents and mobile phase pH on their retention times

The separation of five amino beta-lactam antibiotics by reversed-phase high-performance liquid chromatography was studied as an insight into their retention behaviour. These five amphoteric compounds are cephradine, cephalexine, cefaclor, ampicillin and amoxicillin. Both octadecylsilane-bonded silica (C18) columns and phenyl-bonded silica (phenyl) columns were used, with mobile phase pH values between 2.5 and 7.4. In the absence of ion-pairing reagents the retention times for all the five compounds were the shortest at pH 4-6. The phenyl column was found to improve the separation between cephradine and ampicillin at pH values lower than 3, when these two compounds appeared as fused peaks on the C18 on C18 columns, with mobile phases both with and without ion-pairing reagents, were compared. The addition of 0.005 or 0.02 M tetraethylammonium acetate to the mobile phase did not result in significant ion-pair formation, except at pH values higher than 5.5. A strong ion-pairing effect was obtained at pH values higher than 6 with 0.005 or 0.02 M tetrabutylammonium phosphate, and the retention was decreased at pH values lower than 4. On the other hand, 0.005 M heptanesulphonic acid exhibited an ion-pair retention effect at pH values lower than 5. The molecular structures and pK(a) values were used to account for the retention behaviour of these antibiotics in the various mobile phases.