Adsorption energies of molecular oxygen on Au clusters

The adsorption properties of O(2) molecules on anionic, cationic, and neutral Au(n) clusters (n=1-6) are studied using the density functional theory (DFT) with the generalized gradient approximation (GGA), and with the hybrid functional. The results show that the GGA calculations with the PW91 functional systemically overestimate the adsorption energy by 0.2-0.4 eV than the DFT ones with the hybrid functional, resulting in the failure of GGA with the PW91 functional for predicting the adsorption behavior of molecular oxygen on Au clusters. Our DFT calculations with the hybrid functional give the same adsorption behavior of molecular oxygen on Au cluster anions and cations as the experimental measurements. For the neutral Au clusters, the hybrid DFT predicts that only Au(3) and Au(5) clusters can adsorb one O(2) molecule.     

Adsorption of molecular hydrogen and hydrogen sulfide on Au clusters

The authors present theoretical results describing the adsorption of H2 and H2S molecules on small neutral and cationic gold clusters (Au(n)((0/+1)), n=1-8) using density functional theory with the generalized gradient approximation. Lowest energy structures of the gold clusters along with their isomers are considered in the optimization process for molecular adsorption. The adsorption energies of H2S molecule on the cationic clusters are generally greater than those on the corresponding neutral clusters. These are also greater than the H2 adsorption energies on the corresponding cationic and neutral clusters. The adsorption energies for cationic clusters decrease with increasing cluster size. This fact is reflected in the elongations of the Au-S and Au-H bonds indicating weak adsorption as the cluster grows. In most cases, the geometry of the lowest energy gold cluster remains planar even after the adsorption. In addition, the adsorbed molecule gets adjusted such that its center of mass lies on the plane of the gold cluster. Study of the orbital charge density of the gold adsorbed H2S molecule reveals that conduction is possible through molecular orbitals other than the lowest unoccupied molecular orbital level. The dissociation of the cationic Au(n)SH2+ cluster into Au(n)S+ and H2 is preferred over the dissociation into Au(m)SH2+ and Au(n-m), where n=2-8 and m=1-(n-1). H2S adsorbed clusters with odd number of gold atoms are more stable than neighboring even n clusters.     

Theoretical insight of nitric oxide adsorption on neutral and charged Pdn (n = 1–5) clusters

Density functional theory (DFT) calculations within the framework of generalized gradient approximation have been used to systematically investigate the adsorption of nitric oxide (NO) molecule on neutral, cationic, and anionic Pd_n (n = 1–5) clusters. NO coordinate to one Pd atom of the cluster by the end‐on mode, where the tilted end‐on structure is more favorable due to the additional electron in the π* orbital. On the contrary, in the neutral and cationic Pd₂ system, NO coordinates to the bridge site of cluster preferably by the side‐on mode. Charge transfer between Pd clusters and NO molecule and the corresponding weakening of N? O bond is an essential factor for the adsorption. The N? O stretching frequency follow the order of cationic > neutral > anionic. Binding energy of NO on anionic clusters is found to be greater than those of neutral and cationic clusters. © 2015 Wiley Periodicals, Inc.     

Theoretical study of NO adsorption on gold surfaces

The activities of neutral,anionic,and cationic Au(111),Au(100),and Au(310) surfaces,as well as an Au adatom on Au(111) surface towards NO adsorption have been studied by performing density functional theory calculations.It was found that the activity of gold increases as the coordination number of the gold atoms decreases,and that the cationic surfaces are generally more active than the neutral and anionic surfaces.The activity of Au surfaces towards NO adsorption is attributable to the presence of low coor...     

Density functional study of the interaction of carbon monoxide with small neutral and charged silver clusters

CO adsorption on small neutral, anionic, and cationic silver clusters Ag(n) (n = 1-7) has been studied with use of the PW91PW91 density functional theory (DFT) method. The adsorption of CO on-top site, among various possible sites, is energetically preferred irrespective of the charge state of the silver cluster. The cationic silver clusters generally have a greater tendency to adsorb CO than the anionic and neutral silver ones, except for n = 3 and 4, and the binding energies reach a local minimum at n = 5. The binding energies on the neutral clusters, instead, reach a local maximum at n = 3, which is about 0.87 eV, probably large enough to be captured in the experiments. Binding of CO to the silver clusters is generally weaker than that to the copper and gold counterparts at the same size and charge state. This is due to the weaker orbital interaction between silver and CO, which is caused by the larger atomic radius of the silver atom. In contrast, Au atoms with a larger nuclear charge but a similar atomic radius to silver owing to the lanthanide contraction are able to have a stronger interaction with CO.     

Structure and energetics of two- and three-dimensional neutral, cationic, and anionic gold clusters Au(5< or = n < or =9)Z (Z=0,+/-1)

Low-energy structures are found on the potential energy surfaces of the neutral, cationic, and anionic gold clusters Au(5< or = n < or =9)Z (Z=0,+/-1) and on the neutral potential energy surface of Au(9). These structures provide insights on the two to three dimensional (2D-->3D) transition in small neutral and charged gold clusters. It is demonstrated that the size threshold for the 2D-3D coexistence is lower for cationic than neutral gold clusters: the 2D-3D coexistence develops for Au(5) (+) and Au(7) (+) on the cationic potential energy surfaces while only for Au(9) on the neutral. Two metastable long-lived dianions of gold clusters are also reported.     

Density functional study of carbon monoxide adsorption on small cationic,neutral, and anionic aluminum nitride clusters

CO adsorption on small cationic, neutral, and anionic (AlN)_n (n = 1–6) clusters has been investigated using density functional theory in the generalized gradient approximation. Among various possible CO adsorption sites, an N on‐top (onefold coordinated) site is found to be the most favorable one, irrespective of the charge state of the clusters. The adsorption energies of CO on the anionic (AlN)_nCO (n = 2–4) clusters are greater than those on the neutral and cationic complexes. The adsorption energies on the cationic and neutral complexes reflect the odd–even oscillations, and the adsorption energies of CO on the cationic (AlN)_nCO (n = 5, 6) clusters are greater than those on the neutral and anionic complexes. The adsorption energies for the different charge states decrease with increasing cluster size. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Adsorption of O2 on tubelike Au24 and Au24- clusters

The nondissociative adsorptions of O(2) on the neutral and anionic Au(24) have been studied using the density functional theory (DFT) in the generalized gradient approximation. Their geometrical structures are optimized by using a combination of the relativistic effective core potential and all-electron potential with scalar relativistic corrections. It is found that the adsorptions of O(2) on the tubelike Au(24) and Au(24) (-) are more stable than it on their space-filled counterparts. Mulliken population analysis shows that the O(2) adsorbed on the tubelike Au(24) and Au(24) (-) got more electrons than on the amorphous ones, which may be a reason why the O(2) can be adsorbed more easily on the former rather than on the latter. Compared with the previous DFT studies of O(2) adsorbed on small Au(n) (n< or =10) clusters, we have shown that the O(2) can also be adsorbed on the neutral even Au(24) with an adsorption energy compatible with that on the small neutral odd gold clusters, but the adsorption energy of O(2) on the anionic Au(24) (-) is lower than that on the small anionic Au(n) with even n. In all the optimized geometrical structures of the O(2)-adsorbed Au(24) and Au(24) (-) clusters, including both tubelike and amorphous ones, we found that O(2) prefers its two O atoms to be attached to two near gold atoms with the least coordination number rather than only one O atom to be attached to one gold atom.     

Density functional study of the interaction of chlorine atom with small neutral and charged silver clusters

Chlorine adsorption on small neutral, anionic, and cationic silver clusters Ag(n) (n=2-7) has been studied using the PW91PW91 density functional method. It was found that the adsorption of chlorine on the lowest-energy bare clusters does not always produce the lowest-energy complexes. In addition, the binding of chlorine can greatly change the geometries of the silver clusters in some cases. Among various possible adsorption sites, bridge site is energetically preferred for the neutral Ag(n) while top site is energetically more preferred for the anionic Ag(n) with n< or =6. For cationic clusters, adsorptions on bridge and face sites have similar binding energies, which are much larger than those on top sites. Natural bond orbital analyses show that irrespective of charge state, electrons always transfer from silver atoms to adsorbate and silver acts like alkali metals in the interaction with chlorine atom. Significant odd-even alternation patterns in the properties of the complexes have been observed: Even-electron clusters often have higher ionization energies, lower electron affinities, and higher dissociation energies than their odd-electron neighbors. It was also found that chlorine atoms bind more strongly with odd-electron bare clusters than with even-electron bare clusters. These patterns reveal that even-electron clusters are more stable than odd-electron clusters.     

Density Functional Study on Structure and Bonding Nature of CO Adsorbed Rh<Stack><Subscript>n</Subscript><Superscript>+/−</Superscript></Stack> (n = 2–8) Clusters

Systematic investigations on lowest energy CO adsorbed neutral and ionic Rh_n (n = 2–8) clusters in the gas phase are performed with all electron relativistic method using density functional theory within the generalized gradient approximation. Geometrical and electronic parameters are evaluated to understand the bonding nature as well as the binding interaction of CO on stable neutral and ionic rhodium clusters. Anionic adducts exhibit higher adsorption energy along with smaller Rh–C and larger C–O bond distances in comparison to neutral and cationic Rh_nCO (n = 2–8) clusters. Synergic bond formation is noticed between rhodium and carbon atom of CO molecule due to back-donation of electron from metal d-orbitals to π* orbital of CO in the case of anionic and some neutral clusters. Angular and Mülliken charge analysis along with electron density distribution suggest that anionic rhodium clusters form strong bond with carbon atom of CO than the neutral and cationic clusters.     

Density functional study of small neutral and charged silver cluster hydrides

Small neutral, anionic, and cationic silver cluster hydrides AgnH and anionic HAgnH (n=1-7) have been studied using the PW91PW91 density functional method. It was found that the most stable structure of the AgnH complex (neutral or charged) does not always come from that of the lowest energy bare silver cluster plus an attached H atom. Among various possible adsorption sites, the bridge site is energetically preferred for the cationic and most cases of neutral Agn. For anionic Agn, the top site is preferred for smaller Agn within n相似文献   

Adsorption of a cationic dye molecule on polystyrene microspheres in colloids: effect of surface charge and composition probed by second harmonic generation

Nonlinear optical probe, second harmonic generation (SHG), of the adsorption of the dye molecule malachite green (MG), in cationic form at pH < or = 5, on polystyrene microspheres in aqueous solution is used to study the effect of surface charge and composition on molecular adsorption. Three types of polystyrene microspheres with different surface composition are investigated: (1) a sulfate terminated, anionic surface, (2) a neutral surface without any functional group termination, and (3) an amine terminated, cationic surface. The cationic dye was found to adsorb at all three surfaces, regardless of surface charge. The adsorption free energies, DeltaG's, measured for the three surfaces are -12.67, -12.39, and -10.46 kcal/mol, respectively, with the trend as expected from the charge interactions. The adsorption density on the anionic surface, where attractive charge-charge interaction dominates, is determined by the surface negative charge density. The adsorption densities on the neutral and cationic surfaces are on the other hand higher, perhaps as a result of a balance between minimizing repulsive charge interaction and maximizing attractive molecule-substrate and intermolecular interactions. The relative strength of the SH intensity per molecule, in combination of a model calculation, reveals that the C(2) axis of the MG molecule is nearly perpendicular to the surface on the anionic surface and tilts away from the surface norm when the surface is neutral and further away when cationic. Changing the pH of the solution may alter the surface charge and subsequently affect the adsorption configuration and SH intensity.     

Adsorption of CO on oxygen preadsorbed neutral and charged gas phase Pd4 clusters: A density functional study

We present the results of a density functional calculation on adsorption of O₂, CO, and their coadsorption at various sites of neutral, cationic, and anionic Pd₄ clusters. For all the clusters, the dissociative adsorption of oxygen sitting on Pd bridge sites is found to be preferable. Both O₂ and CO binding energies are found to be higher for the anionic Pd₄ cluster followed by cationic and neutral cluster. However, binding energies of O₂ or CO in the coadsorption complexes follow the trend: anionic > neutral > cationic. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Density functional investigation of the interaction of acetone with small gold clusters

The structural evolution of Au(n) (n=2, 3, 5, 7, 9, and 13) clusters and the adsorption of organic molecules such as acetone, acetaldehyde, and diethyl ketone on these clusters are studied using a density functional method. The detailed study of the adsorption of acetone on the Au(n) clusters reveals two main points. (1) The acetone molecule interacts with one gold atom of the gold clusters via the carbonyl oxygen. (2) This interaction is mediated through back donation mainly from the spd-hybridized orbitals of the interacting gold atom to the oxygen atom of the acetone molecule. In addition, a hydrogen bond is observed between a hydrogen atom of the methyl group and another gold atom (not involved in the bonding with carbonyl oxygen). Interestingly, the authors notice that the geometries of Au(9) and Au(13) undergo a significant flattening due to the adsorption of an acetone molecule. They have also investigated the role of the alkyl chain attached to the carbonyl group in the adsorption process by analyzing the interaction of Au(13) with acetaldehyde and diethyl ketone.     

Adsorption of nitric oxide on small Rh(n)± clusters: role of the local atomic environment on the dissociation of the N-O bond

We present extensive pseudopotential density functional theory calculations dedicated to analyze the stability and dissociation behavior of NO molecules adsorbed on small nonmagnetic Rh(n)± clusters. Following the experimental work of Anderson et al. (J. Phys. Chem. A 2006, 110, 10992), we consider rhodium structures of different sizes (n = 3, 4, 6, and 13) and charge states onto which we attach NO species in both molecular and dissociative configurations. The relative stability between different Rh(n)± isomers depends on the ionization state of the clusters as well as on the presence of NO adsorbates on the surface. Various adsorbed configurations for the NO molecules are found when switching from cationic to neutral to anionic rhodium clusters. In particular adsorbed phases in which the NO molecule is attached with its N-O bond parallel to the plane of square or triangular facets are characterized by elongated nitrogen-oxygen interatomic distances, a fact that plays a fundamental role in the dissociation behavior of the adsorbate. We use the nudged elastic band method to analyze possible reaction pathways and transition states that could be present in our (Rh(n) + NO)± systems. We found (as in surface studies) that the dissociation of the N-O bond is more easily obtained on square facets than on triangular atomic environments, a fact that indirectly reveals the structure of Rh(n)± clusters present in the gas phase experiments. The energy barriers that need to be overcome to achieve the breaking of the N-O bond depend on the charge state of the systems, a result that could be used to tune the catalytic activity of these types of materials.     

Theoretical study of oxygen adsorption on pure Au(n+1)+ and doped MAu(n)+ cationic gold clusters for M = Ti, Fe and n = 3-7

A comparative study of the adsorption of an O2 molecule on pure Au(n+1)+ and doped MAu(n)+ cationic gold clusters for n = 3-7 and M = Ti, Fe is presented. The simultaneous adsorption of two oxygen atoms also was studied. This work was performed by means of first principles calculations based on norm-conserving pseudo-potentials and numerical basis sets. For pure Au4 +, Au6+, and Au7+ clusters, the O2 molecule is adsorbed preferably on top of low coordinated Au atoms, with an adsorption energy smaller than 0.5 eV. Instead, for Au5+ and Au8+, bridge adsorption sites are preferred with adsorption energies of 0.56 and 0.69 eV, respectively. The ground-state geometry of Au(n)+ is almost unperturbed after O2 adsorption. The electronic charge flows towards O2 when the molecule is adsorbed in bridge positions and towards the gold cluster when O2 is adsorbed on top of Au atoms, and both the adsorption energy and the O-O bond length of adsorbed oxygen increase when the amount of electronic charge on O2 increases. On the other hand, we studied the adsorption of an O2 molecule on doped MAu(n)+ clusters, leading to the formation of (MAu(n)O2+) ad complexes with different equilibrium configurations. The highest adsorption energy was obtained when both atoms of O2 bind on top of the M impurity, and it is larger for Ti doped clusters than for Fe doped clusters, showing an odd-even effect trend with size n, which is opposite for Ti as compared to Fe complexes. For those adsorption configurations of (MAu(n)O2+) ad involving only Au sites, the adsorption energy is similar to or smaller than that for similar configurations of Au(n)+1O2 + complexes. However, the highest adsorption energy of (MAu(n)O2+) ad is higher than that for (Au(n)+1O2+) ad by a factor of approximately 4.0 (1.2) for M = Ti (M = Fe). The trends with size n are rationalized in terms of O-O and O-M bond distances, as well as charge transfer between oxygen and cluster substrates. The spin multiplicity of those (MAu(n)O2+) ad complexes with the highest O2 adsorption energy is a maximum (minimum) for M = Fe (Ti), corresponding to parallel (anti-parallel) spin coupling of MAu(n)+ clusters and O2 molecules. Finally, we obtained the minimum energy equilibrium structure of complexes (Au(n)O2+) dis and (MAu(n)O2+) dis containing two separated O atoms bonded at different sites of Au(n)+ and MAu(n)+ clusters, respectively. For (MAu(n)O2 (+)) dis, the equilibrium configuration with the highest adsorption energy is stable against separation in MAu(n)+ and O2 fragments, respectively. Instead, for (Au(n)O2+) dis, only the complex n = 6 is stable against separation in Au(n)+ and O2 fragments. The maximum separation energy of (MAu(n)O2+) dis is higher than the O2 adsorption energy of (MAu(n)O2+) ad complexes by factors of approximately 1.6 (2.5), 1.6 (1.7), 1.5 (2.4), 1.5 (1.3), and 1.6 (1.8) for M = Ti (Fe) complexes in the range n = 3-7, respectively.     

Parity alternation of ground-state P(n)(-) and P(n)(+) (n = 3-15) phosphorus clusters

The ground-state structures of neutral, cationic, and anionic phosphorus clusters P(n), P(n)(+), and P(n)(-) (n = 3-15) have been calculated using the B3LYP/6-311+G* density functional method. The P(n)(+) and P(n)(-) (n = 3-15) clusters with odd n were found to be more stable than those with even n, and we provide a satisfactory explanation for such trends based on concepts of energy difference, ionization potential, electron affinity, and incremental binding energy. The result of odd/even alternations is in good accord with the relative intensities of cationic and anionic phosphorus clusters observed in mass spectrometric studies.     

Stability of small Pdn (n=1-7) clusters on the basis of structural and electronic properties: a density functional approach

Density functional calculations within the generalized gradient approximation have been used to investigate the lowest energy electronic and geometric structures of neutral, cationic, and anionic Pd(n) (n=1-7) clusters in the gas phase. In this study, we have examined three different spin multiplicities (M=1, 3, and 5) for different possible structural isomers of each neutral cluster. The calculated lowest energy structures of the neutral clusters are found to have multiplicities, M=1 for Pd(1), Pd(3), Pd(5), Pd(6), and Pd(7), while M=3 for Pd(2) and Pd(4). We have also determined the lowest energy states of cationic and anionic Pd(n) (n=1-7) clusters, formed from the most stable neutral clusters, in three spin multiplicities (M=2, 4, and 6). Bond length, coordination number, binding energy, fragmentation energy, bond dissociation energy, ionization potential, electron affinity, chemical hardness, and electric dipole moment of the optimized clusters are compared with experimental and other theoretical results available in the literature. Based on these criteria, we predict the four-atom palladium cluster to be a magic-number cluster.     

Interaction of amino acids with gold and silver clusters

Binding of gold and silver clusters with amino acids (glycine and cysteine) was studied using density functional theory (DFT). Geometries of neutral, anionic, and cationic amino acids with Au3 and Ag3 clusters were optimized using the DFT-B3LYP approach. The mixed basis set used here was denoted by 6-31+G** (union or logical sum)LANL2DZ. This work demonstrated that the interaction of amino acids with gold and silver clusters is governed by two major bonding factors: (a) the anchoring N-Au(Ag), O-Au(Ag), and S-Au(Ag) bonds and (b) the nonconventional N-H...Au(Ag) and O-H...Au(Ag) hydrogen bonds. Among the three forms of amino acids, anionic ones exhibited the most tendency to interact with the Au and Ag clusters. Natural bond orbital analysis was performed to calculate charge transfer, natural population analysis, and Wiberg bond indices of the complexes. Atoms-in-molecules theory was also applied to determine the nature of interactions. It was shown that these bonds are partially electrostatic and partially covalent.     

Aun(n=2-9)团簇与乙醇分子相互作用的第一性原理研究

利用密度泛函理论研究了Au_n(n=2-9)团簇吸附一个乙醇分子的结构和电子性质. 研究结果表明: Au_n(n=2-9)团簇的最稳定构型为二维平面结构, Au6团簇最稳定; 吸附过程是通过金团簇上一个特定的金原子与乙醇分子中氧原子相互作用完成, 形成了20种稳定构型; 金原子的配位数对吸附作用影响明显; 作为吸附主体的金团簇和被吸附的乙醇分子在吸附前后构型无明显变化, 它们之间为弱相互作用.