The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids

The step dissociation constants of ethylenediamine-N,N′-diacetic-N,N′-dipropionic and ethylenediamine-N,N,N′,N′-tetrapropionic acids at 298.15 K and ionic strengths of 0.1, 0.5, and 1.0 (KNO₃) were determined potentiometrically. The results were extrapolated to zero ionic strength by the equation with one individual parameter. The thermodynamic constants of dissociation were calculated. The results are compared with the corresponding data on related compounds.     

Cyclopalladation of N,N,N′,N′-tetramethylisophthalthioamide

Summary N,N,N,N-Tetramethylisophthalthioamide (Hmpt) was cyclopalladated with PdCl₂ in hot dimethylsulphoxide to give [PdCl(mpt)]. The structure was determined by X-ray analysis. The thioamide is metallated at C(2) to act as an S528-01C528-02S tridentate anionic ligand. There is appreciable steric repulsion between the benzene ring H(4, 6) and the dimethylamino groups. The hydrogens and the methyl groups mutually deviate from the coordination plane in opposite directions. The stability of the fused 5,5-membered chelate ring formed by the S528-03C528-04S ligand seems to overcome the steric hindrance. Derivatives were prepared by replacement of the chloride ion with iodide, diethyldithiocarbamate, 4-tert-butylpyridine, or tri-n-butylphosphine, and characterized spectroscopically. The S528-05C528-06S-fused chelate ring was maintained in these derivatives.     

Preparation and Characterization of N,N′-Dialkyl-1,3-propanedialdiminium Chlorides,N,N′-Dialkyl-1,3-propanedialdimines,and Lithium N,N′-Dialkyl-1,3-propanedialdiminates

We describe convenient preparations of N,N′-dialkyl-1,3-propanedialdiminium chlorides, N,N′-dialkyl-1,3-propanedialdimines, and lithium N,N′-dialkyl-1,3-propanedialdiminates in which the alkyl groups are methyl, ethyl, isopropyl, or tert-butyl. For the dialdiminium salts, the N₂C₃ backbone is always in the trans-s-trans configuration. Three isomers are present in solution except for the tert-butyl compound, for which only two isomers are present; increasing the steric bulk of the N-alkyl substituents shifts the equilibrium away from the (Z,Z) isomer in favor of the (E,Z), and (E,E) isomers. For the neutral dialdimines, crystal structures show that the methyl and isopropyl compounds adopt the (E,Z) form, whereas the tert-butyl compound is in the (E,E) form. In aprotic solvents all four dialdimines (as well as the lithium dialdiminate salts) adopt cis-s-cis conformations in which there presumably is either an intramolecular hydrogen bond (or a lithium cation) between the two nitrogen atoms.     

N,N-dialkoxy-N′-alkylureas

The chlorination of N-alkoxy-N-alkylureas (1) by the action oft-BuOCl proceeds regiospecifically to give stable N-chloro-N-alkoxy-N-alkylureas (2). The alcoholysis of2 leads to N,N-dialkoxy-N-alkylureas (3). The alkaline hydrolysis of3 is a new, convenient method for the preparation of dialkoxyamines.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2441–2443, October, 1992.     

Poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide, N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide, poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide, and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide catalyzed formylation of amines and alcohols using ethyl formate under microwave irradiation

A simple, rapid, and efficient procedure for formylation of primary and secondary amines and alcohols using ethyl formate catalyzed with poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide (PCBS), N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide (TCBDA), poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide (PBBS) and also N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide (TBBDA) was adopted. The reactions were performed under microwave irradiation with high yields.     

Vibrational spectra of N,N-dimethyl/diethylaniline,N,N,N′,N′-tetramethyl/tetraethyl-p-phenylenediamine and N,N,N′,N′-tetramethyl/tetraethylbenzidine derivatives

The ground state and protonated state (quaternized salt) vibrational spectra (200–1800 cm⁻¹) of the title amines are reported for various ring and/or methyl deuterated derivatives. Complete assignments are proposed and compared to those established for the parent hydrocarbons, benzene and biphenyl, and for the parent primary amines, aniline, p-phenylenediamine and benzidine. The electronic distribution, N(n)→ring(π) charge-transfer character and inductive effects are characterized from a vibrational point of view. Finally changes in the vibrational and electronic conformation upon protonation of the nitrogen atom are discussed. These results provide a fundamental basis for the vibrational investigation of excited states and reactive transients of aromatic amines.     

N,N′-Diacylated imidazolidines and hexahydropyrimidines

A method for the preparation ofN-monoacyl imidazolidines and hexahydropyrimidines (as hydrochlorides) by interaction of monoacylated derivatives of ethylenediamine and trimethylenediamine with chloromethyl methyl ether was developed. Also a method for the preparation ofN,N-diacylimidazolidines and hexahydropyrimidines either by acylation of their monoacyl derivatives or by reaction of the correspondingN,N-diacyl alkylenediamine derivatives with dimethoxymethane, diacetoxymethane, 1,3,5-trioxane or chloromethyl methyl ether was designed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1452–1456, August, 1994.     

A calorimetric study of N,N-diethyl-N′-furoylthiourea and N,N-diisobutyl-N′-furoylthiourea

The standard ( p^o =  0.1 MPa) molar enthalpies of combustion in oxygen, at T =  298.15 K, were measured by rotative bomb calorimetry for crystalline N, N -diethyl- N^′-furoylthiourea, (2-C₄H₃O)CONHCSN(C₂H₅)₂, HFET, and N, N -diisobutyl- N^′-furoylthiourea, (2-C₄H₃O)CONHCSN(iso-C₄H₉)₂, HFIB. The standard molar enthalpies of sublimation of both HFET and HFIB were measured by high-temperature Calvet microcalorimetry. These values were used to derive the standard molar enthalpies of formation of the compounds, in their crystalline and gaseous phases.     

Synthesis,Crystal Structure and Spectroscopic Properties of N,N′-Diphenyl-N,N′-bis(2-fluorophenyl)-1,1′-biphenyl-4,4′-diamine

A fluorinated tetraphenylbenzidine derivative, N,N′-diphenyl-N,N′-bis(2-fluorophenyl)-1,1′-biphenyl-4,4′-diamine (C36H26F2N2, Mr = 524.59) was synthesized via the palladiumcatalyzed Buchwald-Hartwig reaction of N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine with 2-fluoroiodobenzene (yield: 75%) and structurally characterized. It crystallizes in monoclinic, space group P21/n with a = 9.820(7), b = 14.305(11), c = 10.233(8) , β = 108.973(9)o, V = 1359.3(18) 3, Z = 2, Dc = 1.282 g/cm3, μ(MoKα) = 0.084 mm-1, F(000) = 548, S = 1.018, the final R = 0.0439 and wR = 0.0928. It presents a linear centrosymmetric framework constituted by a linkage of biphenyl as a bridge and two fluorinated diphenylamine moieties. The UV-Vis absorption and fluorescence spectra of the title compound were also investigated. This compound emits intense blue fluorescence with a peak wavelength of 406 nm in film.     

N,N′-Bis(trimethylsilyl)dicyandiamide

N,N-Bis(trimethylsilyl)dicyandiamide was prepared for the first time by the reaction of dicyandiamide with hexamethyldisilazane in boiling tetrahydrofuran. Thermal transformations of this compound were studied by DTA. The novel compound may be used in the synthesis of bis(trimethylsilyl)carbodiimide.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 498–500, March, 1994.     

N,N′-Bis(silylmethyl)azodicarboxamides

Russian Journal of General Chemistry - The first representatives of silicon-containing azocarboxamides, N,N′-bis(silylmethyl) azodicarboxamides, were synthesized by the reaction of...     

Kristallstruktur von N,N,N′,N′-Tetraisopropyl-p-phenylen-diammonium-dichlorid und-bis(tetrachloroaluminat)

Summary Protonation of the sterically overcrowded N,N,N,N-tetraisopropyl-p-phenylenediamine leads to a significant shortening of the C-N bond lengths of 7 pm as well as to a widening of the phenyl ipso-angle to 122°. All structural changes can be attributed to the twisted diisopropylammonium substituents and their electron acceptor properties.

     

Sensitive Spectrophotometric Determination of Benzoylperoxide with N,N,N′,N′-Tetramethyl-p-phenylenediamine

Abstract

A highly sensitive spectrophotometric determination of benzoylperoxide (BPO) based on the color developing reaction between N,N,N′,N′-tetramethyl-p-phenylenediamine (TMPD) and BPO in the presence of cerium(IV) in weakly acidic media is proposed. The calibration graph is linear in the range 0–6000 ng BPO per 10 ml with an apparent molar absorptivity of 4.73 × 10⁵ 1 mol^?1 cm-1 at 612 nm. The proposed method is about 50-fold more sensitive than N-ethyl-2-naphthylamine (NENA), and application to assays of flour is described.     

GC-MS determination and optimization of extraction of N,N′-dimethyl-N,N′-diphenylcarbamide from building materials

N,N’-dimethyl-N,N’-diphenylcarbamide (centralite) extracted from building materials was quantitated using ion trap GC-MS detection technique. Both linearity and standard deviation of the calibration curve were dependent on the conditions of the mass spectral detection. The most precise calibration has been achieved by quantification of a mass ion not participating in secondary reactions and which is produced via single fragmentation. The best recovery of centralite was obtained after either 30 min of normal extraction with toluene at 60 °C or 10 min of ultrasonic extraction with chloroform at room temperature. Using the latter method resorption processes might cause decrease in efficiency of the recovery at longer extraction time. Received: 3 July 1998 / Revised: 5 November 1998 / Accepted: 26 January 1999     

Efficiency and Aging Comparison Between N,N′-Bis (3-methylphenyl)-N,N′-diphenylbenzidine (TPD) and N,N′-Di-[(1-naphthalenyl)-N,N′-diphenyl]-1,1′-biphenyl-4,4′-diamine (NPD) Based OLED Devices

In this paper we present and discuss experimental results to evaluate performances and aging behaviour of two Hole Transporting Material (HTM), TPD and NPD, in Organic Light Emitting Device (OLED) with structure: ITO/HTM/Alq3/Al. For each of these HTMs, devices with several thicknesses have been built, to measure and emphasize behaviours of material-geometry combinations. Electro-optical properties have been measured to estimate and compare brightness, power efficiency and aging decays.