含模糊缺陷率且允许缺货的EOQ模型研究

生产系统不完善、自然灾害、运输破损等因素对传统EOQ模型中产品质量100%合格的假设提出了巨大的挑战.本文研究了模糊环境中产品存在质量缺陷情况下允许缺货的库存模型,运用更为一般的LR型模糊数表示缺陷率、缺货成本、订货成本、需求等可能出现不确定情况的参数,建立经济订货批量模型,并运用符号距离法对模型进行反模糊化,确定了使总利润最大化的最优订货批量.最后利用实验仿真验证了模型,分析并揭示了模糊缺陷率等因素对经济订货批量的影响.     

基于数量折扣合同和缺货损失的EOQ模型的改进

经济订购批量模型假定需求率、单位持有成本、订货成本为常数下得到总成本最低的订购批量,这些参数常数化的假设在现实中通常难以满足.假定需求和订货费为不确定的、库存成本包括年固定成本(与订货量无关)和年可变成本(与订货量有关),用三角模糊数表示年需求和订货费,通过引入数量折扣合同来量化单位产品进价,分别在不允许缺货和考虑缺货损失两种情况下得到最佳订货量.最后的算例表明了模型的合理性.     

一般EOQ模型的初等解法及其性质

在求解一般经济订货批量（EOQ）模型时,国内外文献通用的解法是多元函数求极值的微分学方法。本文提出了一种基于模型结构的初等数学解法。这一解法不仅简单易懂,且能将模型的一些重要性质鲜明地揭示出来,如：装配费等于一个周期内的总存贮费与总缺货费之和,而这是微分学解法所经常忽略的。     

关于信用期内含缺陷产品EOQ模型

考虑到在实际中供应链上游供应商提供给下游零售商的信用支付期通常为一个订货周期,建立了缺陷率服从一定分布的缺陷产品在信用支付策略下的最优订货批量模型.模型中允许缺货发生并且以最大期望利润为目标函数,通过分析得到模型最优解.最后给出仿真实验,并且分析了模型参数变化对最优解的影响.     

随机需求下具有有效期的易变质物品的库存管理北大核心CSCD

本本文研究了无限时间具有有效期的易变质物品的(T,r,Q)的库存补货策略.在市场需求率随机,允许缺货且设定最大缺货量的条件下,建立了一个确定易变质物品最优补货策略的优化模型,并采用缺货回补的办法,利用多元极值和隐函数定理的思想得到了最优补货批量和订货点.在最后的算例中,通过Matlab软件模拟出最优补货批量和最优缺货量,并对模型的参数作了灵敏性分析.     

随机需求下具有有效期的易变质物品的库存管理

本本文研究了无限时间具有有效期的易变质物品的(T,r,Q)的库存补货策略.在市场需求率随机,允许缺货且设定最大缺货量的条件下,建立了一个确定易变质物品最优补货策略的优化模型,并采用缺货回补的办法,利用多元极值和隐函数定理的思想得到了最优补货批量和订货点.在最后的算例中,通过Matlab软件模拟出最优补货批量和最优缺货量,并对模型的参数作了灵敏性分析.     

仓库容量有限条件下允许缺货的两类存贮模型

研究了仓库容量有限条件下允许缺货的两类存贮问题,建立了使用租借仓库时相应的存贮模型,给出了最优存贮策略.     

两种随机存贮管理模型的建立和求解

建立了仓库容量有限条件下单品种、多品种允许缺货的随机存贮模型.采用连续的时间变量更合理地描述了问题,简化了模型的建立.模型的求解是一个以分段的平均损失费用函数作为目标的带约束最优化问题.针对题目中的具体数据对随机量送货滞后时间的密度函数进行了估计,解出了单品种、多品种条件下最优订货点的值和存贮方案.通过分情况讨论把单品种存贮模型推广为多品种(m种)存贮模型,论证了目标函数的独立变量为2m-1个,使模型更加清晰、求解方便.类比控制论中的相关理论提出了一定条件下多品种存贮的最优性原理,给出了证明,指出该原理简化模型和验证模型求解结果的作用.讨论了销售速率具有随机性时的存贮模型,实际当中调整修正订货点的方法,以及仓库最大存贮量的一种预测办法.最后指出了模型的优缺点.     

允许缺货的时滞变质物品的库存模型

本文给出了允许缺货,一订货就交货的时滞变质物品的存贮问题.并给出了最优库存策略     

模糊需求下的库存风险及最优库存决策

分析了在模糊需求下,按经典库存模型中的经济订货批量和订货周期所导致的库存风险损失。推导了模糊需求下的经济风险函数。给出了风险函数在模糊需求分布下的重心决策方法,在此基础上得到了模糊需求下经济批量的修正公式,为模糊库存风险分析的研究提供了一种方法。     

线性四步法的最优系数

线性四步法是求解一阶常微分方程初值问题:     

On Busy Periods of the Unbounded Brownian Storage

A stationary storage process with Brownian input and constant service rate is studied. Explicit formulae for quantities related to busy periods (excursions) are derived. In particular, we compute the distributions of the occupation times the process spends above and below, respectively, the present level during the on-going busy period, and make the surprising observation that these occupation times are identically distributed.     

Policy analytics need more than a spreadsheet: a case study in funding formulae

This article presents two case studies, concerning the allocation of £Billions by a mechanism communicated via spreadsheet models. It argues that technical analytic skills as well as policy development skills are a vital component of governance. In the UK, Central Government uses funding formulae to distribute money to local service providers. One commonly stated goal of such formulae is equity of service provision. However, given the complexity of public services, together with variations in need, delivery style and the exercise of stakeholder judgement as to which needs should be met and how, such formulae frequently obscure the process by which equity has been taken into account. One policy ‘solution’ to managing such tensions is to seek ‘transparency’. With respect to funding formulae, this commonly involves publishing the underlying data and formulae in spreadsheets. This paper extends the argument that such ‘transparency’ requires an audience that understands the policy assumptions (and related conceptualisations), data sources, methodological approaches and interpretation of results. It demonstrates how the search for policy ‘transparency’ is also met by the technical quality assurance goals that the operational research community would recognise as best practice in the development both of software generally and spreadsheet models specifically. Illustrative examples of complex formulae acting to subvert equity are drawn from the English Fire and Rescue Service and Police Service allocation formulae. In the former, an increase in the amount of deprivation, as measured by one of six indicators, has the perverse effect of decreasing the financial allocation. In the latter, metropolitan areas such as London are found to gain most from the inclusion of variables measuring sparsity. The conclusion from these scenarios is that the steps needed to for technical quality assurance and policy transparency are mutually reinforcing goals, with policy analysts urged to make greater use of technical analytic skills in software development.     

The Cumulative Idle Time in an ND/D/1 Queue

An ND/D/1 queueing model means that N independent periodic sources are served by a single server and the packets have the same size. These models have received close attention as general queueing models in telecommunications. Both discrete models, where it is only permitted to transmit packets at fixed time instances, and also continuous models, where the time of transmission is not restricted, can be applied in the modeling. This paper provides the exact distribution of the cumulative idle time duration in such queuing systems and also proposes accurate approximation formulae for large systems. The results of this paper are of practical significance because existing approximations of the distribution of the cumulative idle time can be replaced by the proposed formulae.AMS subject classification: 68M20, 60K25This revised version was published online in June 2005 with corrected coverdate     

Simple expressions for finding recovery system inventory control parameter values

In recent years considerable effort has been devoted to the development of inventory control models for joint manufacturing and remanufacturing. Optimality of control policies is analyzed and algorithms for the determination of parameter values have been developed. However, there is still a lack of formulae or algorithms that allow for an easy computation of optimal or near optimal policy parameter values. This paper addresses the problem of computing the produce-up-to level S and the remanufacture-up-to level M in a periodic review inventory control model. We provide simple formulae for the policy parameter values, which can easily be implemented within spreadsheet applications. The approach is to derive news-vendor-type formulae that are based on underage and overage cost considerations. We propose different formulae depending on whether lead times for production and remanufacturing are identical or not. A numerical study shows that the obtained solutions provide relatively small cost deviations compared to the optimal solution within the investigated class of inventory control policies.     

Relative generalized Hamming weights of cyclic codes

Relative generalized Hamming weights (RGHWs) of a linear code with respect to a linear subcode determine the security of the linear ramp secret sharing scheme based on the linear codes. They can be used to express the information leakage of the secret when some keepers of shares are corrupted. Cyclic codes are an interesting type of linear codes and have wide applications in communication and storage systems. In this paper, we investigate the RGHWs of cyclic codes of two nonzeros with respect to its irreducible cyclic subcodes. We give two formulae for RGHWs of the cyclic codes. As applications of the formulae, explicit examples are computed. Moreover, RGHWs of cyclic codes in the examples are very large, comparing with the generalized Plotkin bound of RGHWs. So it guarantees very high security for the secret sharing scheme based on the dual codes.     

A Model-Theoretic Property of Sharply Bounded Formulae,with some Applications

We define a property of substructures of models of arithmetic, that of being length-initial, and show that sharply bounded formulae are absolute between a model and its length-initial submodels. We use this to prove independence results for some weak fragments of bounded arithmetic by constructing appropriate models as length-initial submodels of some given model.     

具有相关误差的多元线性模型的更新方程

已知的线性模型的更新方程是在对模型加了不相关误差结构的约束, 或只对带有固定参数的一元线性模型考虑的. 本文考虑具有相关误差的多元线性模型下的更新方程, 给出了在补充参数, 数据或指标时, 未知参数阵的最佳线性无偏估计及残积阵的更新方程. 公式适用于固定参数与随机参数两种情形.     

Fractal Activity Time Models for Risky Asset with Dependence and Generalized Hyperbolic Distributions

Risky asset models with the dependence through fractal activity time are described. The construction of the fractal activity time is implemented via superpositions of Ornstein-Uhlenbeck type processes driven by Lévy noise. The model features both tractable dependence structure and desired marginal distributions of the returns from the generalized hyperbolic class: the Variance Gamma and normal inverse Gaussian. These distributions provide good fit to real financial data. Pricing formulae for the proposed models are derived.     

Preventive Maintenance of Equipment Subject to Continuous Deterioration and Stochastic Failure

This study is concerned with the derivation (in the form of a numerical procedure) of an optimal doctrine regarding continuous attendance to, and preventive replacement of, equipment subject to both gradual deterioration and catastrophic failure. Some simple models are considered and, for special cases, explicit formulae are derived.