A Luminescent and Sublimable DyIII-Based Single-Molecule Magnet

The reaction of [Ln(hfac)₃] ⋅ 2 H₂O and pyridine-N-oxide (PyNO) leads to isostructural dimers of the formula [Ln(hfac)₃(PyNO)]₂ (Ln=Eu, Gd, Tb, Dy). The Dy derivative shows a remarkable single-molecule magnet behavior with complex hysteresis at 1.4 K. The dynamics of the magnetization features are two relaxation regimes: a thermally activated one at high temperature (τ₀=(5.62±0.4)×10⁻¹¹ s and Δ=(167±1) K) and a quantum tunneling regime at low temperature with a tunneling frequency of 0.42 Hz. The analysis of the Gd derivative evidences intradimer antiferromagnetic interactions (J=(−0.034±0.001) cm⁻¹). Moreover, the Eu, Tb, and Dy derivatives are luminescent with quantum yield of 51, 53, and 0.1 %, respectively. The thermal investigation of [Dy(hfac)₃(PyNO)]₂ shows that the dimers can be sublimated intact, suggesting their possible exploit as active materials for surface-confined nanostructures to be investigated by fluorimetry methods.     

Desolvation-Induced Highly Symmetrical Terbium(III) Single-Molecule Magnet Exhibiting Luminescent Self-Monitoring of Temperature

A conjunction of Single-Molecule Magnet (SMM) behavior and luminescence thermometry is an emerging research line aiming at contactless read-out of temperature in future SMM-based devices. The shared working range between slow magnetic relaxation and the thermometric response is typically narrow or absent. We report Tb^III-based emissive SMMs formed in a cyanido-bridged framework whose properties are governed by the reversible structural transformation from [Tb^III(H₂O)₂][Co^III(CN)₆] ⋅ 2.7H₂O ( 1 ) to its dehydrated phase, Tb^III[Co^III(CN)₆] ( 2 ). The 8-coordinated complexes in 1 show the moderate SMM effect but it is enhanced for trigonal-prismatic Tb^III complexes in 2 , showing the SMM features up to 42 K. They are governed by the combination of QTM, Raman, and Orbach relaxation with the energy barrier of 594(18) cm⁻¹ (854(26) K), one of the highest among the Tb^III-based molecular nanomagnets. Both systems exhibit emission related to the f–f electronic transitions, with the temperature variations resulting in the optical thermometry below 100 K. The dehydration leads to a wide temperature overlap between the SMM behavior and thermometry, from 6 K to 42 K. These functionalities are further enriched after the magnetic dilution. The role of post-synthetic formation of high-symmetry Tb^III complexes in achieving the SMM effect and hot-bands-based optical thermometry is discussed.     

Dy(III) - and Yb(III) -Curcuminoid Compounds: Original Fluorescent Single-Ion Magnet and Magnetic Near-IR Luminescent Species

The multifunctional behavior of two mononuclear lanthanide compounds attached to a curcuminoid called 9?Accm has been investigated. The results show that [Dy(9?Accm)(2) (NO(3) )(dmf)(2) ] Yb(9?Accm)(3) (py)] behaves as a single-ion magnet and that both compounds display luminescent responses and exhibit affinity for graphite surfaces.     

Photoluminescent Lanthanide(III) Single-Molecule Magnets in Three-Dimensional Polycyanidocuprate(I)-Based Frameworks

Three-dimensional bimetallic cyanido-bridged frameworks, [Ln^III(2,2′-bipyridine N,N′-dioxide)₂(H₂O)][Cu^I₂(CN)₅]⋅5 H₂O (Ln=Dy, 1 ; Yb, 2 ), are reported. They exhibit the effect of slow relaxation of magnetization, leading to a magnetic hysteresis loop, and sensitized visible-to-near-infrared photoluminescence. Both physical properties are related to the eight-coordinated lanthanide(III) complexes embedded in the unprecedented coordination skeleton composed of symmetry-breaking polycyanidocuprate linkers. The three-dimensional d–f cyanido-bridged network was shown to serve as an efficient coordination scaffold to achieve emissive lanthanide single-molecule magnets.     

From a Dy(III) Single Molecule Magnet (SMM) to a Ferromagnetic [Mn(II)Dy(III)Mn(II)] Trinuclear Complex

The Schiff base compound 2,2'-{[(2-aminoethyl)imino]bis[2,1-ethanediyl-nitriloethylidyne]}bis-2-hydroxy-benzoic acid (H(4)L) as a proligand was prepared in situ. This proligand has three potential coordination pockets which make it possible to accommodate from one to three metal ions allowing for the possible formation of mono-, di-, and trinuclear complexes. Reaction of in situ prepared H(4)L with Dy(NO(3))(3)·5H(2)O resulted in the formation of a mononuclear complex [Dy(H(3)L)(2)](NO(3))·(EtOH)·8(H(2)O) (1), which shows SMM behavior. In contrast, reaction of in situ prepared H(4)L with Mn(ClO(4))(2)·6H(2)O and Dy(NO(3))(3)·5H(2)O in the presence of a base resulted in a trinuclear mixed 3d-4f complex (NHEt(3))(2)[Dy{Mn(L)}(2)](ClO(4))·2(H(2)O) (2). At low temperatures, compound 2 is a weak ferromagnet. Thus, the SMM behavior of compound 1 can be switched off by incorporating two Mn(II) ions in close proximity either side of the Dy(III). This quenching behavior is ascribed to the presence of the weak ferromagnetic interactions between the Mn(II) and Dy(III) ions, which at T > 2 K act as a fluctuating field causing the reversal of magnetization on the dysprosium ion. Mass spectrometric ion signals related to compounds 1 and 2 were both detected in positive and negative ion modes via electrospray ionization mass spectrometry. Hydrogen/deuterium exchange (HDX) reactions with ND(3) were performed in a FT-ICR Penning-trap mass spectrometer.     

Exchange-Biasing in a Dinuclear Dysprosium(III) Single-Molecule Magnet with a Large Energy Barrier for Magnetisation Reversal

A dichlorido-bridged dinuclear dysprosium(III) single-molecule magnet [Dy₂L₂(μ-Cl)₂(thf)₂] has been made by using a diamine-bis(phenolate) ligand, H₂L. Magnetic studies show an energy barrier for magnetisation reversal (U_eff) around 1000 K. An exchange-biasing effect is clearly seen in magnetic hysteresis with steps up to 3 K. Ab initio calculations exclude the possibility of a pure dipolar origin of this effect leading to the conclusion that super-exchange through the chloride bridging ligands is important.     

A Study of Magnetic Relaxation in Dysprosium(III) Single-Molecule Magnets

Although the development of single-molecule magnets (SMMs) is rapid, there are only two families of high energy barrier (U_eff) dysprosium(III) SMMs known so far: the cyclopentadienyl (Cp) family with a sandwich structure and the pentagonal-bipyramidal (PB) family with D_5h symmetry. These high-barrier SMMs, which usually possess U_eff>500 cm⁻¹ allow the separate study of the four magnetic relaxation paths, namely, direct, quantum tunnelling, Raman and Orbach processes, in detail. Whereas the first family is chemically more challenging to modify the Cp rings, it is shown herein that the latter family, with the common formulae [DyX¹X²(L_eq)₅]⁺, such as X¹/X²=⁻OCMe₃, ⁻OSiMe₃, ⁻OPh, Cl⁻ or Br⁻; L_eq=THF/pyridine/4-methylpyridine, can be readily fine-tuned with a range of axial and equatorial ligands by simple substitution reactions. This allows unambiguous confirmation that the U_eff mainly depends on the identity of X¹ and X², rather than on L_eq. More importantly, the fitted parameters are barrier dependent. If X¹ is an O donor and X² is a halide, 500<U_eff<600 cm⁻¹, log τ_0avg (s)=−10.66, log C_avg (s⁻¹ K⁻ⁿ)= −5.05, n_avg=4.1 and T_H=9 K (in which τ₀ is the pre-exponential factor for the Orbach relaxation process, C and n are parameters used to describe Raman relaxation, and T_H is the highest temperature at which magnetic hysteresis is observed). For cases in which both X¹ and X² are O donors, 900<U_eff<1300 cm⁻¹, log τ_0avg (s)=−11.63, log C_avg (s⁻¹ K⁻ⁿ)= −6.03, n_avg=4.1 and 18<T_H<25 K. Based on these results, it can be further concluded that U_eff not only has a linear correlation to the axial Dy−X bond lengths, but also to T_H for these PB SMMs. This represents the first systematic study of a family of lanthanide SMMs and derives the first magneto-structural correlation in Dy SMMs.     

Substrate-Independent Magnetic Bistability in Monolayers of the Single-Molecule Magnet Dy2ScN@C80 on Metals and Insulators

Magnetic hysteresis is demonstrated for monolayers of the single-molecule magnet (SMM) Dy₂ScN@C₈₀ deposited on Au(111), Ag(100), and MgO|Ag(100) surfaces by vacuum sublimation. The topography and electronic structure of Dy₂ScN@C₈₀ adsorbed on Au(111) were studied by STM. X-ray magnetic CD studies show that the Dy₂ScN@C₈₀ monolayers exhibit similarly broad magnetic hysteresis independent on the substrate used, but the orientation of the Dy₂ScN cluster depends strongly on the surface. DFT calculations show that the extent of the electronic interaction of the fullerene molecules with the surface is increasing dramatically from MgO to Au(111) and Ag(100). However, the charge redistribution at the fullerene-surface interface is fully absorbed by the carbon cage, leaving the state of the endohedral cluster intact. This Faraday cage effect of the fullerene preserves the magnetic bistability of fullerene-SMMs on conducting substrates and facilitates their application in molecular spintronics.     

Luminescent cyclometalated gold(III) complexes

Many luminescent gold(I) compounds are known, but in the vast majority of gold(III) complexes reported until recently, room temperature emission in fluid solution does not occur. As for other d(8) and d(6) metals, the key to obtaining gold(III) compounds with favorable luminescence properties seems to be the use of cyclometalating ligands that ensure very strong ligand fields. Recent progress in this emerging research field is discussed, and where appropriate, comparison to isoelectronic platinum(II) complexes and their photophysical properties is made.     

A binuclear Fe(III)Dy(III) single molecule magnet. Quantum effects and models

The binuclear [FeIII(bpca)(mu-bpca)Dy(NO3)4], having Single Molecule Magnet (SMM) properties, belonging to a series of isostructural FeIIILnIII complexes (Ln = Eu, Gd, Tb, Dy, Ho) and closely related FeIILnIII chain structures, was characterized in concise experimental and theoretical respects. The low temperature magnetization data showed hysteresis and tunneling. The anomalous temperature dependence of M?ssbauer spectra is related to the onset of magnetic order, consistent with the magnetization relaxation time scale resulting from AC susceptibility measurements. The advanced ab initio calculations (CASSCF and spin-orbit) revealed the interplay of ligand field, spin-orbit, and exchange effects and probed the effective Ising nature of the lowest states, involved in the SMM and tunneling effects.     

Extraction behavior of Tm(III), Dy(III) and Sm(III) lanthanide with N-benzoyl-N-phenylhydroxalamine

The extraction of Sm(III), Dy(III) and Tm(III) with N-benzoyl-N-phenylhydroxalamine (BPHA) in benzene at pH range (1–10) has been studied. Quantitative separation was found in borate media at pH 8. The slope analysis showed that the extracted complex was M(BPHA)₃, where M=Sm(III), Dy(III) and Tm(III). The effect of various masking agents indicated that EDTA, oxalate, fluoride, phosphate and citrate, interfered in this study. Decontamination study showed that Cu(II), Zn(II), Ni(II), Co(II), Cr(III), Sc(III) and Fe(III) had very poor separation factors, whereas Sn(II), Cd(II), In(III), Ru(II), Hg(II), Ag(I), Ta(V) and Hf(IV) had very large separation factor. The effect of different diluents showed that carbontetrachloride, chloroform, benzene, toluene, nitrobenzene dichloromethane, MIBK and cyclohexanone were equally good for extraction except TBP due to ion association.     

Luminescent (N^C^C) Gold(III) Complexes: Stabilized Gold(III) Fluorides

We report the design, synthesis, and application of a (N^C^C)‐ligand framework able to stabilize highly electron‐deprived gold(III) species. This novel platform enabled the preparation of C(sp²)‐gold(III) fluorides for the first time in monomeric, easy‐to‐handle, bench‐stable form by a Cl/F ligand‐exchange reaction. Devoid of oxidative conditions or stoichiometric use of toxic Hg salts, this method was applied to the preparation of multiple [C(sp²)‐Au^III‐F] complexes, which were used as mechanistic probes for the study of the unique properties and intrinsic reactivity of Au? F bonds. The improved photophysical properties of [(N^C^C)Au^III] complexes compared to classical pincer (C^N^C)‐Au systems paves the way for the design of new late‐transition‐metal‐based OLEDs.     

Luminescent properties of europium(III) and terbium(III) complexes with para- and ortho-ethoxybenzoic acids

The luminescent properties of europium(III) and terbium(III) complexes with para- and ortho-ethoxybenzoic acids are studied. The excitation energies of the triplet states of ligands are determined, a hypothesis is made about the efficient luminescence of europium(III) and terbium(III) complexes, the geometry of the coordination polyhedron of a europium complex is established, and the luminescence quantum yields of the complexes in solution are determined.     

Quantum efficiency of the luminescence of Eu(III), Tb(III) and Dy(III) in aqueous solutions

Summary The luminescence quantum efficiency of Eu(III), Tb(III) and Dy(III) in chloride solutions as well as complexed by aminopolyacetic acids was determined. An interpretation of the observed dependences in the system investigated has been proposed.

---

Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in wäßrigen Lösungen

Zusammenfassung Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in Chloridlösung und in Komplexen mit Aminopolyessigsäuren wurde bestimmt. Eine Interpretation der beobachteten Abhängigkeiten im untersuchten System wurde vorgeschlagen.

     

Recent Progress in Sublimable Cationic Iridium(III) Complexes for Organic Light‐Emitting Diodes

Sublimable cationic iridium(III) complexes consisting of light‐emitting coordinated iridium(III) cations and nonluminous negative counter‐ions, show excellent photophysical properties, superior electrochemical behaviors and high thermal stabilities, therefore have emerged as a new library of phosphorescent materials for various organic optoelectronic devices. Here we summarize and highlight the recent progress in sublimable cationic iridium(III) complexes, regarding the material design strategies, synthetic routes, photoluminescent characteristics in both solutions and neat films, together with the current utilization in organic light‐emitting diodes based on the emissive material layers fabricated by vacuum evaporation deposition. Finally, we present a brief outlook thereon, indicating the great promise and brilliant application prospect of sublimable cationic iridium(III) complexes in future flat‐panel display and solid‐state lighting technology.     

Mn(III)-Based Oxidative Free-Radical Cyclizations of Unsaturated Ketones

Mn(III)-based oxidative free-radical cyclization of unsaturated ketones is a versatile synthetic procedure with broad applicability. For example, oxidation of cyclopentanone 1a with 2 equiv of Mn(OAc)(3).2H(2)O and 1 equiv of Cu(OAc)(2).H(2)O in AcOH at 80 degrees C for 1.5 h affords 75% of bicyclo[3.2.1]oct-3-en-8-one 8a and 15% of bicyclo[3.2.1]oct-2-en-8-one 9a. Bridged bicyclic ketones that cannot enolize further are isolated in good yield. Monocyclic beta,gamma-unsaturated ketones that can enolize are oxidized further to give gamma-acetoxy enones. The formation of bicyclo[3.3.1]non-2-en-9-one (57a) in 52% yield from 2-allylcyclohexanone (56a) suggests that kinetically controlled enolization is the rate-determining step in alpha-keto radical formation. A wide variety of examples delineating the scope, limitations, and stereoselectivity of this reaction are presented.     

Luminescent Au(III) organometallic complex of N-confused tetraphenylporphyrin

An organometallic Au(iii) complex of N-confused tetraphenylporphyrin has been synthesized and its electrochemical and photophysical properties investigated; unique emission is observed in solution at ambient temperature.