Preparation and polymerization of a diisocyanate from the Diels-Alder adduct of levopimaric acid and acrylic acid

Starting from tetrahydroabietic acid the model compounds tetrahydroabietoyl chloride, 2-aminoethyltetrahydroabietate hydrochloride, and 2-isocyanatoethyltetrahydroabietate have been prepared. Carbamate and urea derivatives of the isocyanate have been prepared. A Diels-Alder adduct of levopimaric acid and acrylic acid has been prepared and converted to its diacid chloride. The β-aminoethyl ester hydrochloride has been synthesized and converted to a diisocyanate which has been polymerized with poly(tetramethylene glycol) and also with p-phenylenediamine. Dimerex resin, a technical polymerized rosin, has been similarly converted to a diisocyanate. This isocyanate has not proven to be useful as a polymer-forming intermediate.     

A fluorimetric and circular dichroism study of hemoglobin--effect of pH and anionic amphiphiles

In this work, bovine hemoglobin (Hb) has been studied mainly by the fluorescence method. pH has been found to exert a profound effect on Hb structure. This has been confirmed by fluorescence and circular dichroism (CD) studies. The pH-induced change in quaternary structure of Hb indirectly affects its secondary structure. This in turn affects ligand binding to Hb at various pH. The binding of two amphiphiles, a bile salt and a surfactant, have been investigated. The pH-induced structural modification of Hb has been confirmed by studies with the well-known denaturant urea and the polarity probe ANS, which has been used as an extrinsic fluorophore.     

Hydrogen and higher shell contributions in Zn2+, Ni2+, and Co2+ aqueous solutions: an X-ray absorption fine structure and molecular dynamics study

A detailed investigation of the hydration structure of Zn2+, Ni2+, and Co2+ in water solutions has been carried out combining X-ray absorption fine structure (EXAFS) spectroscopy and Molecular Dynamics (MD) simulations. The first quantitative analysis of EXAFS from hydrogen atoms in 3d transition metal ions in aqueous solutions has been carried out and the ion-hydrogen interactions have been found to provide a detectable contribution to the EXAFS spectra. An accurate determination of the structural parameters associated with the first hydration shell has been performed and compared with previous experimental results. No evidence of significant contributions from the second hydration shell to the EXAFS signal has been found for these solutions, while the inclusion of the hydrogen signal has been found to be important in performing a quantitative analysis of the experimental data. The high-frequency contribution present in the EXAFS spectra has been found to be due to multiple scattering (MS) effects inside the ion-oxygen first coordination shell. MD has been used to generate three-body distribution functions from which a reliable analysis of the MS contributions to the EXAFS spectra of these systems has been carried out.     

Surface and in-depth characterization of TiC/C and Ti(C,N) layers by means of AES and Factor Analysis

Magnetron sputtered TiC/C multilayers and Plasma Vapour Deposited Ti(C,N) layers have been investigated by AES. The carbon sensivity factor has been calibrated for the correct composition of a TiC standard sample. Nitrogen has been measured indirectly based on the Ti(L3M23M23)/Ti(L3M23V) peak area ratio in the direct E.N(E) spectrum using Ti, TiC and TiN standard samples. The influence of Tougaard background removal has been tested. As the less accurate method taking the Ti peak-to-peak ratio has been found to give adequately good results. It has been possible to recalculate AES depth profiles, where only peak-to-peak values and no peak areas in the direct spectrum are available. Factor Analysis has been applied to AES depth profiling results. The data matrix in each column contains the linked experimental spectra of the measured elements. Based on the standard spectra the main components of a TiN layer on silicon have been identified by Factor Analysis. The structure of a TiC/C multilayer system has been resolved by the characteristic C(KLL) peak shape in C and TiC. Factor Analysis enables to calculate the individual profiles for Ti, TiC and C.     

Effect of chemical structure and crystallinity on sorption,diffusion and chemical stability of polyurethaneacetals

The diffusion of water in non-isocyanate polyurethaneacetals (PUA) of various kinds and compositions has been studied. The direct relationship between the composition of polymers, their degree of crystallinity, morphology and diffusional characteristics has been demonstrated. It has been shown that by changing the polymer composition one can obtain hydrated polymer systems of every type, hydrophobic, hydrophilic and moderately hydrophilic. The kinetics of hydrolytic degradation of PUA in HCl solutions (pH = 0·1) between 20 and 75°C has been investigated. Hydrolysis of acetal bonds has been found to occur in the amorphous phase of a polymer sample, which is mostly formed by the fragments of urethane glycol.The influence of morphology on PUA diffusional characteristics and their stability to hydrolysis has been determined.It has been shown that the physico-chemical properties of PUA can be regulated without the introduction of new compounds.     

Hard and soft acids and bases: atoms and atomic ions

The structural origin of hard-soft behavior in atomic acids and bases has been explored using a simple orbital model. The Pearson principle of hard and soft acids and bases has been taken to be the defining statement about hard-soft behavior and as a definition of chemical hardness. There are a number of conditions that are imposed on any candidate structure and associated property by the Pearson principle, which have been exploited. The Pearson principle itself has been used to generate a thermodynamically based scale of relative hardness and softness for acids and bases (operational chemical hardness), and a modified Slater model has been used to discern the electronic origin of hard-soft behavior. Whereas chemical hardness is a chemical property of an acid or base and the operational chemical hardness is an experimental measure of it, the absolute hardness is a physical property of an atom or molecule. A critical examination of chemical hardness, which has been based on a more rigorous application of the Pearson principle and the availability of quantitative measures of chemical hardness, suggests that the origin of hard-soft behavior for both acids and bases resides in the relaxation of the electrons not undergoing transfer during the acid-base interaction. Furthermore, the results suggest that the absolute hardness should not be taken as synonymous with chemical hardness but that the relationship is somewhat more complex. Finally, this work provides additional groundwork for a better understanding of chemical hardness that will inform the understanding of hardness in molecules.     

Kinetics and mechanism of oxidation of cyclopentanone by N-bromosuccinimide

N-bromosuccinimide oxidation of cyclopentanone in acidic media in presence of mercuric acetate has been made. A zero order dependance to N-bromosuccinimide and a first order dependence to cyclopentanone and hydrogen ion concentration has been observed. Ionic strength, mercuric acetate and succinimide has negligible effect while methanol addition has a positive effect. Various rate parameters have been computed and 1,2-cyclopentanedione identified as the end product. A suitable mechanism in confirmity with the above observations has been proposed.With 2 Figures     

30 years of research in thermal analysis and calorimetry

The research in thermal analysis and calorimetry, conducted by the author over the period 1964 to 1993, is summarised and concisely reviewed. The major investigations have focussed on thermal analysis studies of coordination compounds, particularly the metal dithiocarbamate complexes. A significant solution calorimetric study of some metal dithiocarbamate complexes has also been undertaken. DSC has been applied to determine the sublimation enthalpies of many metal dithiocarbamate and metal pentane-2,4-dionate complexes and solution calorimetry has been applied to study the thermochemistry of the latter group of complexes. Thermal analysis investigations of several inorganic molten salt systems have been initiated. Thermometric titrimetry has been applied to study metal-macrocyclic ligand systems in aqueous media and particularly those systems of environmental significance. Temperature calibration standards for TMA have been proposed and TMA has been applied to study the mechanical properties of several common inorganic compounds. DTA has been applied to study a wide variety of phenols and has subsequently been applied as an analytical technique to determine the components of solid state phenol mixtures. Thermometric titrimetry has been applied to determine the phenolic content of wines. A comprehensive thermal analysis study of Australian brown coal has been undertaken, involving the DSC determination of coal specific energy, a TG/DTA study of the coal pyrolysis and combustion processes and a TG/DTA and EGA study of the cation catalytic effect on the coal pyrolysis process. Thermal analysis and calorimetric techniques have been extensively publicised and promoted by the publication of specialist reviews, the presentation of symposia review papers and the oral presentation of short courses, particularly in the SE Asian region. This review essentially reveals the diversity of possible application of thermal analysis and calorimetric techniques and the primary significance of thermodynamic data in the fundamental rationalisation of chemical phenomena.     

Infra-red and electronic absorption spectra of 2-bromopyrimidine

The electronic absorption spectrum of 2-bromopyrimidine in the u.v. region has been recorded in vapour phase and in solution phase in different solvents. Only one system has been observed in vapour phase and it has been identified as π* ← n transition. In solution phase two systems have been identified. The system on the longer wavelength side has been identified as corresponding to the one observed in vapour phase while the other one has been assigned to a π* ← π transition. The infrared spectrum of this molecule has also been recorded and analysed. Help of these i.r. data has been taken to analyse the u.v. spectrum of 2-bromopyrimidine, considering the molecule as belonging to C_2υ point group.     

Surface and in-depth characterization of TiC/C and Ti(C,N) layers by means of AES and Factor Analysis

Magnetron sputtered TiC/C multilayers and Plasma Vapour Deposited Ti(C,N) layers have been investigated by AES. The carbon sensivity factor has been calibrated for the correct composition of a TiC standard sample. Nitrogen has been measured indirectly based on the Ti_L3M23M23/Ti_L3M23V peak area ratio in the direct EN(E) spectrum using Ti, TiC and TiN standard samples. The influence of Tougaard background removal has been tested. As the less accurate method taking the Ti peak-to-peak ratio has been found to give adequately good results. It has been possible to recalculate AES depth profiles, where only peak-to-peak values and no peak areas in the direct spectrum are available. Factor Analysis has been applied to AES depth profiling results. The data matrix in each column contains the linked experimental spectra of the measured elements. Based on the standard spectra the main components of a TiN layer on silicon have been identified by Factor Analysis. The structure of a TiC/C multilayer system has been resolved by the characteristic C_KLL peak shape in C and TiC. Factor Analysis enables to calculate the individual profiles for Ti, TiC and C.     

Self-organizing silane-siloxane copolymers: Synthesis and behavior in the block and monomolecular layers

Trans tactic cyclolinear organosilicon copolymers with a regular alternation of decamethylcyclohexasiloxane and decamethylcyclosilane units have been synthesized by the heterofunctional polycondensation of trans-2,8-dihydroxydecamethylcyclohexasiloxane with 1,3-or 1,4-dichlorodecamethylcyclohexasilanes. The structure of the copolymers has been studied by ¹H and ²⁹Si NMR, and IR spectroscopy; molecular mass measurements; and elemental analysis. The phase behavior of these copolymers in the block has been examined by DSC, X-ray diffraction, and polarization optical microscopy. It has been demonstrated that the copolymers of interest may exist in the mesomorphic state within a wide temperature interval. The ability of cyclolinear organosilicon copolymers to spread at the water/air interface and to form monolayers has been investigated. It has been shown that cyclosilane units that are structural isomers affect the pattern of surface pressure isotherms of the said copolymers.     

Synthesis of a highly reactive heterocyclic reactant and its unusual photochemistry; mechanistic and exploratory organic photochemistry

[reaction: see text] A unique new set of reactions has been observed in heterocyclic photochemistry. 2-Methyl-4,4-diphenyl-3,4-dihydropyrimidin-1(2H)-one has been synthesized and its photochemistry investigated. This compound has been found to lead to a rearranged, dimeric product arising from a unique bond-scission process.     

Recycling and reuse of a polymer-supported scavenger for amine sequestration

The regeneration and reuse of a supported scavenger 1 for amine sequestration has been achieved up to three times without significant loss of activity. The scavenging process between the aldehyde resin 1 and a range of amines has been investigated in detail to determine the scope of this scavenger. Its application for the rapid purification of a small library of secondary amines 7a-j has also been demonstrated, and it has been shown that the large excess of scavenger resin used can be recovered and recycled, making this a more cost-effective process.     

Enantioselective synthesis and absolute configuration assignment of gabosine O. Synthesis of (+)- and (-)-gabosine N and (+)- and (-)-epigabosines N and O

[reaction: see text] A rational approach to the synthesis of gabosines and other related carba-sugars starting from a masked p-benzoquinone has been designed. The enantioselective acetylation of the hydroxyketal 2 provides a practical entry to either enantiomer of the target products. The strategy has been applied to the synthesis of (+)- and (-)-gabosines N and O and (+)- and (-)-epigabosines N and O. The absolute configuration of natural gabosine O has been established.     

In situ gel forming graft copolymers of a polyaspartamide and polylactic acid: Preparation and characterization

In situ gel forming systems have been prepared by linking polylactic acid (PLA) to a water soluble and polyfunctional polymer, such as α,β-poly(N-2-hydroxyethyl)-d,l-aspartamide (PHEA). Three graft copolymers PHEA-PLA with a different derivatization degree in PLA, have been synthesized and characterized. PHEA-PLA graft copolymer with the highest amount in PLA has been used to prepare solutions in organic solvents able to give rise to gel-like matrices when injected into phosphate buffered saline solution. The chemical degradation of these gels has been evaluated and in vitro tests have been performed to evaluate the cell compatibility of the hydrolysis products. The possibility to use these gels for drug release has been investigated by incorporating leuprolide as a peptide model drug and by evaluating its in vitro release. To improve the drug release profile, PHEA-PLA graft copolymer has been derivatized with pendant carboxylic groups that are able to form an ion pair with the leuprolide thus reducing the burst effect and prolonging its release.     

Polymer film sensor for sampling and remote analysis of polycyclic aromatic hydrocarbons in clear and turbid aqueous environments

A sensor for remote analysis of polycyclic aromatic hydrocarbons (PAHs) has been developed. It is based on direct solid phase extraction of the pollutants on a polymeric film, followed by monitoring the laser induced fluorescence, emitted from the film, via optical fibers. The proposed sensor has been applied to direct PAH analysis in clear and turbid aqueous environments. Linear calibration plots have been obtained for PAH solutions containing both humic substances and clay suspensions. Detection limits in the range of 10 ppt have been achieved. Results are obtained almost instantaneously (in drinking water) or within minutes, in more complicated matrices. This set-up has provided considerable improvement of the detection limits, when compared to the traditional fiber-optic fluorescence probe. In case of pyrene, a 100-fold and a 250-fold improvement in the detection limits have been obtained for the clay and humic substances-containing water, respectively. The spectral response of the polymeric film has been studied under various conditions and the feasibility of the method for analysis of PAH mixtures has been addressed.     

Fabrication and evaluation of single- and dual-channel (Pi-design) microchip electrophoresis with electrochemical detection

A new dual-channel microchip capillary electrophoresis (MCE) has been developed on glass substrates for the first time with electrochemical detection. Dual-channel (called Pi-design) as well as single-channel microchips have been fabricated on soda-lime glass using photolithography, wet etching and thermal bonding. Moreover, a laser writing system has been applied for the fabrication of photomasks with the different microchip designs (single- and dual-channel configurations). The microfabricated channels have been characterized by optical, confocal and scanning electron microscopy. The resulting single- and dual-channel microchips have been evaluated using an end-channel amperometric detector based on one (single-channel) or two (dual-channel) 100-mum gold wires aligned at the outlet of the separation channel. Parameters affecting the separation of several phenolic compounds (dopamine, p-aminophenol and hydroquinone) have been studied in the glass microchips. Thus, the influence of separation voltage, detection potential and background electrolyte has been examined in the single-channel microchip. Different total length microchannel has been compared. Furthermore, the possibility of carrying out two simultaneous measurements has been demonstrated in the new dual-channel microchip electrophoresis. The injection format has been checked and resulted to be critical, in such a way that a special and new form is employed for obtaining simultaneous signals at both channels. Analytical characteristics, such as sensitivity and reproducibility have been evaluated and resulted very adequate.     

Characterization and purification of supramolecular metal complexes using gel-permeation chromatography

Gel-permeation chromatography (GPC) has been used to analyze transition-metal-based squares, triangles, and related supramolecular complexes. Using rhenium-containing molecular squares of different sizes, a linear calibration curve has been established, which was used for confirming the relative sizes of other assemblies. GPC can also discriminate cyclic trimers and tetramers of a dirhodium building block. Preparative GPC has been used to resolve macroscopic samples of a rhenium-based supramolecular mixture into pure syn and anti isomers. A mixture of "triangle" and "square" has also been successfully separated.     

The solution behavior of poly(vinylpyrrolidone): its clouding in salt solution, solvation by water and isopropanol, and interaction with sodium dodecyl sulfate

This article deals with the solution properties of poly(vinylpyrrolidone) (PVP) in salt and surfactant environment. The cloud point (CP) of PVP has been found to be induced by the salts NaCl, KCl, KBr, Na2SO4, MgSO4, and Na3PO4. On the basis of CP values for a salt at different [PVP], the energetics of the clouding process have been estimated. The effect of the surfactant, sodium dodecyl sulfate (SDS), on the salt-induced CP has also been studied, and reduction in CP at low [SDS] and increase in CP at high [SDS] have been observed. The water vapor adsorption of PVP has been determined by isopiestic method. The results display a BET Type III isotherm whose analysis has helped to obtain the monolayer capacity of PVP and formation of multilayer on it. The solvation of PVP in a solution of water and a water-isopropanol mixture has been determined by conductometry from which contribution of the individual components were estimated. The interaction of PVP with SDS in solution led to formation of a complex entity, which has been studied also by conductometry adopting a binding-equilibrium scheme. SDS has been found to undergo two types of binding as monomers in the pre- critical aggregation concentration (CAC) range and as small clusters in the post CAC region. The stoichiometries of binding and binding constant were evaluated.     

Role of cations and confinement in asymmetric photochemistry: enantio- and diastereo-selective photocyclization of tropolone derivatives within zeolites

Asymmetric induction in photochemical reactions has been explored using the photochemistry of tropolones as a model. Three approaches have been examined: chiral inductor, chiral auxiliary and [chiral inductor + chiral auxiliary]. All three methods gave excellent asymmetric induction in zeolite and very little or zero induction in solution. Results presented on tropolones clearly illustrate the remarkable influence that a confined space studded with cations can have on asymmetric induction. Tropolone derivatives, upon irradiation undergo 4pi-electron electrocyclization to yield a bicyclic product and a rearranged product. Enantiomeric excess up to 68% has been achieved in the cyclized product. In systems where a chiral inductor has been covalently linked, diastereomeric excess as high as 88% has been achieved within a zeolite while the same system in solution gave 10%.