Determination of cadmium in water samples by graphite furnace atomic absorption spectrometry after cloud point extraction

The formation of a complex with 2-(5-brom-2-pyridylazo)-5-(diethylamino)-phenol (5-Br-PADAP) and cloud point extraction have been applied to the preconcentration of cadmium followed by its determination by graphite furnace atomic absorption spectrometry (GFAAS) using octylphenoxypolyethoxyethanol (TritonX-114) as surfactant. The chemical variables affecting the separation were optimized. At pH 7.0, preconcentration of only 10 mL of sample in the presence of 0.05% TritonX-114 and 2.5 × 10⁻⁶ M 5-Br-PADAP enabled the detection of 0.04 μg/L cadmium. The enrichment factor was 21 for cadmium. The regression equation was A = 0.0439C(μg/L) + 7.2 × 10⁻³. The correlation coefficient was 0.9995. The precision for 10 replicate determinations at 10 μg/L Cd was 2.7% relative standard deviation (RSD). The proposed method has been applied to the determination of cadmium in water samples. The text was submitted by the authors in English.     

Determination of cadmium in paint samples by graphite furnace atomic absorption spectrometry with optical temperature control

A graphite furnace atomic absorption spectrometry (GFAAS) method with optical temperature control for the determination of trace cadmium in paint samples is described. Optical temperature control was superior in many respects to current temperature control. The sensibility increased by 60%, the linear range widened by 60%, and the life of graphite tube showed a 200–300% increase because atomization temperature was lowered distinctly and atomization time was shortened. Use of lanthanum chloride as a matrix modifier was investigated. The linear range of calibration curve was 0–24 ng mL⁻¹. The detection limit was 9.6 ng L⁻¹. The characteristic mass was 3.0 pg. The method also resulted in excellent reproducibility (≤2.5% R.S.D.) at such low levels, and the recovery of added cadmium in paint samples was from 94.6% to 102%. This method is readily applicable to the determination of cadmium in paint samples.     

Determination of cadmium in orthophosphoric acid by graphite furnace atomic absorption spectrometry

Summary Cadmium has been determined in analytical-reagent grade orthophosphoric acids by direct graphite furnace atomic absorption spectrometry with Zeeman background correction. The detection limit was 3.0 pg cadmium, corresponding to 1.0 g/l of cadmium in the concentrated acid. Most of the acids analyzed contained 2–5 g/l of cadmium. The method was checked using electrochemical preconcentration of cadmium, followed by flame atomic absorption spectrometry.     

超级微波消解-石墨炉原子吸收光谱法测定虾蛄中镉含量

目的 比较超级微波和普通微波消解方法,建立超级微波-石墨炉原子吸收法测定虾蛄中镉的方法。方法 分别采用超级微波和普通微波消化大虾标准物质,对比消解效果,优选消解方法,采用石墨炉原子吸收法测定,优化基改改进剂、灰化温度等工作参数,确定最佳的分析方法,同时加标回收验证方法的准确性与可靠性。结果 两种消解方法下测得结果均在参考值范围内,在选定方法条件下,镉在质量浓度0.0～2.0 μg/L范围内线性关系良好,相关系数γ=0.999,检出限为0.04 μg/L,定量限为0.12 μg/L,加标回收的准确度为88.5%～105.2%,精密度为2.93%～4.92%。结论 超级微波消解法优于普通微波消解,其耗酸量低、高效便捷、测得数据准确稳定,便于在基层推广,适用于批量虾蛄样品的镉污染监测工作。     

流动注射在线离子交换预富集火焰原子吸收光谱法测定水样中微量锰

提出了以732强酸型阳离子树脂作填充材料,流动注射在线离子交换预富集火焰原子吸收光谱法测定水样中微量锰的分析方法。优化了各项化学条件和流路参数等,考察了共存离子的干扰。富集倍数可达24倍,分析速度为15～20样/h,检出限为2.0ng/mL,相对标准偏差为2.8%(n=15)。对雨水加标回收,回收率为97%～103%。     

Determination of trace elements in seawater samples by on-line column extraction/graphite furnace atomic absorption spectrometry

An innovative procedure for the on-line coupling of ion chromatography with graphite furnace atomic absorption spectrometry is described, which is particularly effective for the determination of trace metals in seawater samples. The Capillary Injection Device (CID) is used as an interface which allows the eluent to be transferred from the chromatographic column into the graphite tube at a flow rate of as high as 2 ml/min. The analytical procedure is based on the metal complex formation with 8-hydroxyquinoline in the sample solution, followed by the preconcentration of the complexes in a chromatographic column packed with XAD-2 resin. The complexes were then eluted from the column with methanol, and quantitatively injected into the furnace. The procedure was validated by determining cadmium and lead in certified reference seawater samples at a level of 30–40 pg/g, with a typical reproducibility of 10% and an accuracy of better than 5%. Finally, it was tested on a real sample of seawater. Due to the high reproducibility, a pg/g concentration level can be measured.     

Determination of traces of molybdenum in sea water by combined anion-exchange — graphite furnace atomic absorption spectrometry

Summary Traces of molybdenum in sea water have been preconcentrated by anion-exchange from acidified samples in the presence of sodium azide. Molybdenum adsorbs strongly on a column of Bio-Rad AG 1 (Cl^–) and can be stripped easily by elution with 2 mol/l NH₄Cl — 2 mol/l NH₄OH solution. Molybdenum in the effluent is determined by graphite furnace atomic absorption spectrometry. The combined method allows to determine traces of molybdenum in sea water as well as non-saline water on a 100 ml sample basis. The method gives a relative standard deviation of better than 8% at a molybdenum level of 10 g 1^–1 of sea water.

---

Bestimmung von Molybdänspuren in Meereswasser mit Hilfe einer Kombination von Anionenaustausch und elektrothermischer Atomabsorptionsspektrometrie

     

Determination of lead in water samples by graphite furnace atomic absorption spectrometry after cloud point extraction

Cloud point extraction (CPE) has been used for the pre-concentration of lead, after the formation of a complex with 2-(5-bromo-2-pyridylazo)-5-(diethylamino)-phenol (5-Br-PADAP), and later analysis by graphite furnace atomic absorption spectrometry (GFAAS) using octylphenoxypolyethoxyethanol (TritonX-114) as surfactant. The chemical variables affecting the separation phase were optimized. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. Under the optimum conditions i.e., pH 8.0, cloud point temperature 40 °C, [5-Br-PADAP] = 2.5 × 10⁻⁵ mol l⁻¹, [Triton X-114] = 0.05%, added methanol volume = 0.15 ml, pre-concentration of only 10 ml sample permitted an enhancement factor of 50-fold. The lower limit of detection (LOD) obtained under the optimal conditions was 0.08 μg l⁻¹. The precision for 10 replicate determinations at 5 μg l⁻¹ Pb was 2.8% relative standard deviation (R.S.D.). The calibration graph using the pre-concentration system for lead was linear with a correlation coefficient of 0.9984 at levels near the detection limits up to at least 30 μg l⁻¹. The method was successfully applied to the determination of lead in water samples.     

Determination of cadmium and zinc in water samples by flame atomic absorption spectrometry after cloud-point extraction

The phase-separation phenomenon of nonionic surfactants occurring in an aqueous solution was used for the extraction of Cd and Zn from water samples. After complexation with 6-(4-nitrophenyl)-2,4-diphenyl-3,5-diaza-bicyclo[3.1.0]hex-2-ene (NDDBH) in hydrochloric acid medium (pH 1), the analytes were quantitatively extracted after centrifugation into the phase rich in the nonionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). Tetrahydrofuran acidified with 0.1 M HCl was added to the surfactant-rich phase prior to its analysis by flame atomic absorption spectrometry. The adopted concentrations for NDDBH, Triton X-114 and hydrochloric acid were all optimized. Detection limits (3σ) of 0.33 and 0.85 ng/mL along with enrichment factors of 157 and 118 for Cd and Zn, respectively, were achieved. The proposed method was applied to the determination of Cd and Zn in acidic solutions of certified reference materials. A comparison with certified values was performed for an evaluation of the accuracy, resulting in a good agreement according to the t-test at a 95% confidence level. The high efficiency of the cloud-point extraction to carry out the determination of the studied analytes in complex matrices was, therefore, demonstrated. The text was submitted by the authors in English.     

Determination of traces of silver in copper by direct Zeeman graphite furnace atomic absorption spectrometry

Summary A method was developed to determine traces of silver in copper by direct Zeeman graphite furnace atomic absorption spectrometry (ZAAS) on solid samples. The system is calibrated using quantitatively doped copper, whose blank silver content is determined using an iterative process. The method has been applied to the analysis of several candidate reference materials. Relative standard deviations of 2 to 5% are obtained in the range 1 to 12 g·g^–1. Furthermore, it was also applied to assess the homogeneity of a neutron dosimetry candidate reference material.     

Trace gold determination by on-line preconcentration with flow injection atomic absorption spectrometry

A reverse-phase extraction column method has been employed as an on-line preconcentration technique for trace gold analysis by flame atomic absorption spectrometry. Di(methylheptyl)methyl phosphonate (DMHMP) loaded onto a macroporous resin was used as the immobilized phase. A thiourea-HCl solution was found successful in eluting the gold. The experimental parameters were optimized by Simplex Optimization, with 17 tests needed to obtain optimal conditions. Sensitivities of 5.2 mug/l. and 2.3 mug/l., with sample frequencies of 45/hr and 48/hr, were obtained by using single and dual-columns respectively. The recoveries for mixed composition samples were 93-110%.     

Determination of copper traces in water samples by flow injection-flame atomic absorption spectrometry using a novel solidified floating organic drop microextraction method

A simple, rapid and inexpensive solidified floating organic drop microextraction (SFODME) and flow injection flame atomic absorption spectrometric determination (FI-FAAS) method for copper were developed. 3-amino-7-dimethylamino-2-methylphenazine (Neutral red, NR) was used as the complexing agent. Several factors affecting the microextraction efficiency, such as, pH, NR and sodium dodecylbenzenesulfonate (SDBS) concentration, extraction time, stirring rate, and temperature were investigated and optimized. Under optimized experimental conditions an enrichment factor of 541 was obtained for 100 mL of sample solution. The calibration graph was linear in the range of 0.5–20.0 ng mL^{− 1} and the limit of detection (3 s) was 0.18 ng mL^{− 1}, the limit of quantification (10 s) was 0.58 ng mL^{− 1}. The relative standard deviation (RSD) for 10 replicate measurements of 10 ng mL^{− 1} copper was 2.7%. The developed method was successfully applied to the extraction and determination of copper in different certified reference materials (Estuarine water, Slew 3 and fortified water, TM 23.2) and real water samples and satisfactory results were obtained.     

Flow injection on-line hydrophobic sorbent extraction for flame atomic absorption spectrometric determination of cadmium in water samples

A flow injection system was developed for on-line sorbent extraction preconcentration and flame atomic absorption spectrometric determination of cadmium in natural water samples. The non-charged cadmium complex with diethyl-dithiophosphate (DDPA) was formed on-line in 0.1 mol L⁻¹ HNO₃ and retained on the hydrophobic poly-chlorotrifluoroethylene (PCTFE) sorbent material. The adsorbed complex was eluted with isobutyl methylketone (IBMK) and injected directly into the nebulizer via a flow compensation unit. All major chemical and flow parameters affecting the complex formation adsorption and elution as well as interference were studied and optimized. By processing 2.4 mL of sample, the enhancement factor was 39 and the sampling frequency was 50 h⁻¹. For 30 s preconcentration time the detection limit was 0.3 μg L⁻¹ and the relative standard deviation at 5.0 μg L⁻¹ Cd concentration level was 2.9%. The calibration curve was linear in the range 0.8–40.0 μg L⁻¹. The accuracy of the method was estimated by analyzing a certified reference material NIST-CRM 1643d (Trace elements in water). Good recoveries were obtained for spiked natural-water and waste-water samples. Correspondence: Aristidis N. Anthemidis, Laboratory of Analytical Chemistry, Department of Chemistry, Aristotle University, GR-Thessaloniki 54124, Greece     

Flow injection determination of Pb and Cd traces with graphite furnace atomic absorption spectrometry

The preconcentration and recovery of lead and cadmium traces at ng l(-1) level were evaluated in standard solutions and natural aqueous samples using a FIAS (Flow Injection Atomic Spectrometry) apparatus. The method is based on retention of the complex formed between Pb or Cd and 1,2-dihydroxy-3,5-benzendisulphonic acid (Tiron) on a macroporous anion-exchange resin. The recovery of the analytes was obtained by elution with 0.1 M HCl and their determination was performed by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). The detection limits were 9 and 7 ng l(-1) for Pb and Cd respectively. The effects of sample solution pH and composition and of interfering agents as well as reagent purity are discussed. The technique was applied to the analysis of natural waters.     

Determination of thallium by furnace atomic absorption spectrometry

The analytical conditions for the determination of thallium by graphite furnace atomic absorption spectrometry were studied and optimized using the peak-height mode. The charring-atomization curves for thallium from different atomization surfaces were constructed and the optimum charring and atomization conditions were established. These atomization surfaces included pyrolytic graphite-, tantalum-, zirconium- and tungsten-coated graphite tubes. The effects of different inorganic acids on the absorbance of thallium from different surfaces were studied. Using tungsten carbide-coated tubes, the interference effects due to hydrochloric and perchloric acids were eliminated. The matrix modification technique was also investigated for increasing the maximum permissible charring temperature for thallium. The matrix modifiers used included tungsten, zirconium, nickel and tantalum. The effect of adding these modifiers were studied in the presence of different acids. Tungsten increased the maximum permissible charring temperature from 400 to 1000 °C.     

Flow injection on-line electrothermal atomic absorption spectrometry

Today the greatest hindrances to couple the continuous FI system to discrete ETAAS operations have been overcome as demonstrated by the great number of papers published in the last few years. This paper reviews 109 references to the development and expansion of the FI-ETAAS methodology. The selected FI-ETAAS systems, namely: on-line column preconcentration and separation systems; on-line knotted reactor preconcentration systems; on-line aerosol deposition systems; flow-injection for in situ trapping of volatile compounds and miscellaneous on-line systems.     

Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Determination of cadmium in the livers and kidneys of puffins by carbon furnace atomic absorption spectrometry.

A carbon furnace atomic absorption procedure is described for the determination of cadmium in the livers and kidneys of puffins, fratercula arctica. Samples are dried and weighed and 2 to 100 mg are dissolved in sulphuric and nitric acids. These solutions are analysed directly in the carbon furnace against aqueous standards and provide accurate results in the range 0-1 to 100 micrograms/g dry weight. The method is simple and rapid and requires much less of the small total sample than would be required for flame atomic absorption.