Porous alumina membranes with branched nanopores as templates for fabrication of Y-shaped nanowire arrays

Porous anodic alumina membranes with Y-branched and double-branched nanopores were fabricated by the stepwise reduction of anodizing potential during the second step of anodization carried out in 0.3 M oxalic acid. The process of nanoporous layer formation and influence of anodizing parameters on structural features of as-obtained anodic aluminum oxide (AAO) membranes were discussed in detail. The pore rearrangement process occurring after the potential decrease was investigated on the basis of the current density vs. time curves, and results were correlated with the field-emission scanning electron microscope images of the pore bottoms taken after different anodizing durations. It was found that the reorganization of nanopores begins after 600 and 500 s from the time of the potential reduction to 42 and 30 V and the process seems to be completed after about 900 and 800 s, respectively. The through-hole AAO membranes were used as templates for the fabrication of gold and polystyrene nanowires via electrochemical deposition and simple immersing in the polymer solution, respectively. The arrays of hierarchically branched nanowires were synthesized, and the dimensions of nanowires were consistent with the shape and structure of used AAO templates.

     

Polyvinylpyrrolidone-assisted ultrasonic synthesis of SnO nanosheets and their use as conformal templates for tin dioxide nanostructures

Single crystalline SnO nanosheets with exposed {001} facets have been prepared by an ultrasonic aqueous synthesis in the presence of polyvinylpyrrolidone, which hinders the spontaneous formation of the truncated bipyramidal SnO microcrystals and exfoliate them into layer-by-layer hierarchical structures and further into separate SnO nanosheets. The SnO nanosheets have been used as conformal sacrificial templates converted into polycrystalline SnO(2), as well as layered SnO/SnO(2) nanostructures, by calcination in air. The concept of fabrication of two-dimensional tin oxide nanostructures demonstrated here may be relevant for the crystal design of layered materials, in general.     

SnO2 quantum dots and quantum wires: controllable synthesis, self-assembled 2D architectures, and gas-sensing properties

SnO2 quantum dots (QDs) and ultrathin nanowires (NWs) with diameters of approximately 0.5-2.5 and approximately 1.5-4.5 nm, respectively, were controllably synthesized in a simple solution system. They are supposed to be ideal models for studying the continuous evolution of the quantum-confinement effect in SnO2 1D --> 0D systems. The observed transition from strong to weak quantum confinement in SnO2 QDs and ultrathin NWs is interpreted through the use of the Brus effective-mass approximation and the Nosaka finite-depth well model. Photoluminescence properties that were coinfluenced by size effects, defects (oxygen vacancies), and surface capping are discussed in detail. With the SnO2 QDs as building blocks, various 2D porous structures with ordered hexagonal, distorted hexagonal, and square patterns were prepared on silicon-wafer surfaces and exhibited optical features of 2D photonic crystals and enhanced gas sensitivity.     

SnO2 meso-scale tubes: One-step,room temperature electrodeposition synthesis and kinetic investigation for lithium storage

SnO₂ meso-scale tubes were synthesized by anodic electrochemical deposition under ambient conditions. Controlled self-bubbling O₂ acted as both the template and the oxidizing agent for obtaining SnO₂ tube structures at the interface of the gas (O₂) and the liquid (electrolyte). Electrochemical testing showed that the meso-scale tubes have higher discharge capacity and better rate capability than the “microbowls” produced by varying the deposition conditions. From the Arrhenius plot, the apparent activation energies were calculated to be 58.4 and 90.1 kJ mol^?1 for the meso-scale tubes and the microbowls, respectively, indicating that the meso-scale structure allows shorter diffusion routes for the lithium ions or for easier interaction with lithium.     

General method for the synthesis of crystalline organic nanorods using porous alumina templates

Nanorods composed of a variety of conjugated organic molecules were synthesized using an anodized alumina template and solvent annealing; detailed study of 200 nm thick 2,7-di-t-butylpyrene rods showed they are crystalline, with single domains extending over several microns.     

氧化锡多孔纳米纤维的制备及储锂性能

采用高压静电纺丝结合高温煅烧的方法制备了SnO₂多孔纳米纤维, 通过调节前驱体浓度获得具有高孔隙率的疏散型纤维, 利用SEM, TGA, XRD和电化学测试等手段对材料进行了表征. 结果表明, SnO₂多孔纳米纤维具有较好的电化学性质, 作为锂离子电池负极材料的初始可逆容量为717 mA·h/g, 20次循环后电池的充放电容量保持在320 mA·h/g左右.     

The synthesis of a chemically reactive and polymeric luminescent gel

In the past, chemically reactive polymeric interfaces have been considered to be of potential interest for developing functional materials for a wide range of practical applications. Furthermore, the rational incorporation of luminescence properties into such chemically reactive interfaces could provide a basis for extending the horizon of their prospective utility. In this report, a simple catalyst-free chemical approach is introduced to develop a chemically reactive and optically active polymeric gel. Branched-polyethyleneimine (BPEI)-derived, inherently luminescent carbon dots (BPEI-CDs) were covalently crosslinked with pentaacrylate (5Acl) through a 1,4-conjugate addition reaction under ambient conditions. The synthesized polymeric gel was milky white under visible light; however, it displayed fluorescence under UV light. Additionally, the residual acrylate groups in the synthesized fluorescent gel allowed its chemical functionality to be tailored through facile, robust 1,4-conjugate addition reactions with primary-amine-containing small molecules under ambient conditions. The chemical reactivity of the luminescent gel was further employed for a proof-of-concept demonstration of portable and parallel ‘ON’/‘OFF’ toxic chemical sensing (namely, the sensing of nitrite ions as a model analyte). First, the chemically reactive luminescent gel derived from BPEI-CDs was covalently post-modified with aniline for the selective synthesis of a diazo compound in the presence of nitrite ions. During this process, the color of the gel under visible light changed from white to yellow and, thus, the colorimetric mode of the sensor was turned ‘ON’. In parallel, the luminescence of the gel under UV light was quenched, which was denoted as the ‘OFF’ mode of the sensor. This parallel and unambiguous ‘ON’/‘OFF’ sensing of a toxic chemical (nitrite ions, with a detection limit of 3 μM) was also achieved even in presence of other relevant interfering ions and at concentrations well below the permissible limit (65 μM) set by the World Health Organization (WHO). Furthermore, this chemically reactive luminescent gel could be of potential interest in a wide range of basic and applied contexts.

An unprecedented chemically reactive and polymeric luminescent gel is developed, and this material is further employed to develop a portable and rapid sensor for a practically relevant analyte (nitrite ions) with a sensitivity of 3 μM.     

Structural,morphological, optical and sensing properties of SnSe and SnSe2 thin films as a gas sensing material

In this work, orthorhombic tin selenide thin films were grown onto three different substrates using an organophosphorus precursor (Ph₃PSe) via chemical vapor deposition. Structural, microstructural and morphological properties of the as-grown films were systematically investigated using XRD, ESEM and AFM respectively. Grain size, microstrain and dislocation were calculated and correlated with different factors. The effects of selenization temperature and substrate type on different film properties and gas sensing response of films deposited onto alumina substrates were investigated. XRD analysis reveals the appearance of a mixed phase as a function of temperature. Furthermore, substrate type plays a key role in the rate of appearance of each phase. EDAX analysis confirms the existence of the desired elements and detect the evaporation of selenium and the appearance of oxygen at higher temperatures. Atomic force microscopy (AFM) was used to investigate the surface topography of the grown thin films.Optical properties of the films grown onto glass and silicon substrates were studied. From the recorded optical data, a direct optical band gap in the range of 0.9–1.3 eV was obtained with an absorption coefficient α > 10⁴ cm⁻¹ throughout large spectral regions. Optical studies were remarkably affected by the obtained phase as well as the selenization temperature. Gas sensing properties of the samples deposited onto alumina substrates were examined as a new sensing material for detection of methane gas at different concentrations. SnSe sensors show high sensitivity, are reversible and exhibit fast response and recovery times compared to SnSe₂ sensors.     

Hydrothermal synthesis of Zn2SnO4 as anode materials for Li-ion battery

Spinel Zn2SnO4 particles with the cubic shape are prepared via a hydrothermal reaction under mild conditions. The hydrothermal conditions, such as alkaline concentration, reaction temperature, and duration time, have an important influence on the product structure and the performance of the electrode prepared with the product. The optimized product is cube-shaped Zn2SnO4 crystalline, which is prepared with 0.4 M of NaOH solution at 200 degrees C for 24 h. These cube-shaped Zn2SnO4 particles with the spinel structure exhibit a large electrochemical capacity of 988 mA h/g and a relatively good capacity retention as anode materials for Li-ion battery. The structures of the as-prepared product and specimens taken from the electrodes after charging-discharging cycles are analyzed by X-ray diffraction, scanning electron microscopy, and transition electron microscopy techniques. In particular, it is found for the first time that the spinel Zn2SnO4 structure exists to a great extent after the first cycle and contributes to the extremely high reversible capacity during the following cycles.     

Thermal decomposition of Me3SnO2PCl2, Me2Sn(O2PCl2)2 and Ph3SnO2PCl2

TG and DTA studies on Me₃SnO₂PCl₂, Me₂Sn(O₂PCl₂)₂ and Ph₃SnO₂PCl₂ were carried out under dynamic argon atmosphere. The results show that the decomposition proceeds in different stages leading to the formation of Sn₃(PO₄)₂ as a stable product. This compound was characterized by IR spectroscopy. Decomposition schemes involving reductive elimination reactions were proposed.     

Adsorbed surfactants as templates for the synthesis of morphologically controlled polyaniline and polypyrrole nanostructures on flat surfaces: from spheres to wires to flat films

Nanostructures of polyaniline (PAni) and polypyrrole (PPy) with controlled morphologies have been synthesized on atomically flat surfaces using adsorbed surfactant molecules as templates. Atomic force microscopy (AFM) has been used to investigate polymer film formation on highly oriented pyrolytic graphite (HOPG) and chemically modified HOPG. Morphological control over the resulting polymer film is possible by the addition of coadsorbing molecules, manipulation of the length of the surfactant hydrophobe, or by changing the surface chemistry of the adsorbing substrate. Phase transitions between spheres, cylinders/wires, and featureless films have been observed which exactly parallel transitions between spheres, cylinders, and flat layers in the adsorbed surfactant. Parallel arrays of PAni nanowires can be synthesized with alignment evident over large areas in a simple self-assembly technique in which fabrication and arrangement take place simultaneously. Such a technique in which one can engineer sub-100-nm-ordered nanoscale pi-conjugated polymer structures of a desired shape by a simple self-assembly process presents potential as templates, sensors, and microelectronic devices.     

Large-scale synthesis of water-soluble nanowires as versatile templates for nanotubes

This study presents a large-scale synthesis of water-soluble sodium fluosilicate (Na(2)SiF(6)) nanowires, which serve as a versatile template for producing nanotubes.     

Porous alumina as a support for catalysts and membranes. Preparation and study

Porous alumina as single tubes and as a multihole structure with controlled properties has been prepared. It is shown that the porous structure of these supports can be controlled without burning out additives but by a variation of the ratio between the main alumina component (α-Al₂O₃) and aluminium hydroxide (binder) in the extrusion masses and thermal treatment conditions. Gas permeability measurements have been used for the characterization of the supports. The properties of the ceramics are shown to satisfy the requirements of membrane supports.     

Porous ZnCo2O4 nanowires synthesis via sacrificial templates: high-performance anode materials of Li-ion batteries

A simple microemulsion-based method has been developed to synthesize ZnCo(2)(C(2)O(4))(3) nanowires that can be transformed to porous ZnCo(2)O(4) nanowires under annealing conditions. The morphology of porous ZnCo(2)O(4) nanowires can be tuned by the initial ZnCo(2)(C(2)O(4))(3) nanowires and the annealing temperatures. The as-synthesized porous ZnCo(2)O(4) nanowires have been applied as anode materials of Li-ion batteries, which show superior capacity and cycling performance. The porous one-dimensional (1D) nanostructures and large surface area are responsible for the superior performance. Moreover, it is indicated that porous ZnCo(2)O(4) nanowires synthesized at low annealing temperature (500 °C) show larger capacity and better cycling performance than that prepared at high annealing temperature (700 °C), because of their higher porosity and larger surface area.     

Aziridines as templates: A general strategy for the stereospecific synthesis of 2‐azetidinones

Various routes to a variety of azridine‐2‐carboxylates have been described and the stereochemistry of these compounds has been determined by spectroscopic methods. Further, greater diversity of β‐lactams via ring expansion of these azridines‐2‐carboxylates were obtained by a general, efficient and direct stereospecific approach.     

C2-Symmetric enantiopure ethanotethered bis(alpha,beta-butenolides) as templates for asymmetric synthesis. Application to the synthesis of (+)-grandisol

Starting from D-mannitol, we have prepared several C(2)-symmetric ethanotethered bis(alpha,beta-butenolides) and studied their [2+2] photocycloaddition reaction with ethylene. The protective groups of the central diol unit have a noticeable influence on the facial selectivity of the cycloaddition, the bis(trimethylsilyloxy) derivatives showing the highest diastereoselectivity. A theoretical conformational analysis of the substrates in the ground state is in good agreement with the diastereofacial selectivity experimentally observed. The bis(photocycloadducts) have been converted into the enantiopure cyclobutanes formally derived from the photoreaction of ethylene with gamma-hydroxymethyl-alpha,beta-butenolide, in which only a moderate facial selectivity had been previously found. As an application of these studies, we have developed a highly efficient and stereoselective synthesis of (+)-grandisol.     

D-glucose-derived polymer intermediates as templates for the synthesis of ultrastable and redispersible gold colloids

A two-stage hydrothermal process was developed for the synthesis of highly dispersed Au colloids. In the first stage, a novel glucose-derived polymer template was prepared by the hydrothermal treatment of glucose at 160 degrees C. This template was then further used in the next step to synthesize highly dispersed gold (Au) colloids by hydrothermal treatment with HAuCl(4.) The templates treated at 160 degrees C with changing reaction times had different templating effects toward Au species. The 3-h treated template was able tightly adhere to the Au colloids. As a result, an unusual stability was observed for the prepared Au particles that could be repeatedly precipitated and redispersed with the template in H(2)O and were also stable against heating (below 160 degrees C) and aging. Meanwhile, the 5-h and 7-h treated templates had much poorer templating effects to Au species, leading to severe aggregation of the Au colloids immobilized on them. The various templating effects were correlated to the different structural features of the templates. Compared to the 5- or 7-h treated templates that were deeply carbonized, the 3-h treated template was only slightly carbonized, thus possessing a lot of functional and hydrophilic O-containing groups that could bind to Au species. These differences in templating ability were also observed in the Au samples prepared by the sonication-assisted method. The highly dispersed Au colloids immobilized on the 3-h treated template were tested for CO oxidation, and a good catalytic activity and stability for CO oxidation was observed.     

Nanocrystalline tin as a preparative tool: synthesis of unprotected nanoparticles of SnTe and SnSe and a new route to (PhSe)4Sn

The reactions of nanocrystalline tin metal (Sn*) with elemental selenium and tellurium and with the diaryldichalcogenides Ph2Se2 and Ph2Te2 have been investigated. Reaction of Sn* with the soluble tellurium source Ph2Te2 led to a clean formation of nanoparticles of cubic SnTe. Dependent on the concentration of Ph2Te2, the particles sizes could be varied between 15 and 60 nm in average, whereas the reaction of Sn* with Ph2Se2 formed molecular Sn(SePh)4 in high yield. The latter molecular compound was thermolyzed at 300 degrees C, yielding nanocrystalline SnSe with a broader distribution of size. The nanoparticles of SnTe were thoroughly investigated by transmission electron microscopy (TEM) and powder X-ray diffraction. The reactions of Sn* with elemental selenium and tellurium gave single- phase but microcrystalline SnSe and SnTe.