Catalytic activity of η-(olefin)palladium(0) complexes with iminophosphine ligands in the Suzuki-Miyaura reaction. Role of the olefin in the catalyst stabilization

The catalytic activity of η²-(olefin)palladium(0)(iminophosphine) complexes in the Suzuki-Miyaura coupling is strongly dependent on the reaction conditions and on the nature of the ligands. The reaction is at the best carried out in aromatic solvents in the presence of K₂CO₃ at 90-110 °C. Higher reaction rates are obtained when the R substituent on the N-imino group is an aromatic group of low steric hindrance and the olefin is a moderate π-accepting ligand such as dimethyl fumarate. At temperatures lower than 90 °C, a self-catalyzed process leading to catalyst deactivation becomes predominant. Preliminary mechanistic investigations indicate that the oxidative addition of the aryl bromide to a Pd(0) species is the rate determining step in the catalytic cycle and that the olefin plays a key role in catalyst stabilization. Systems in situ prepared by mixing Pd(OAc)₂ or Pd(dba)₂ with 1 equiv of iminophosphine appear substantially less active than the preformed catalysts.     

Neutral palladium(II) complexes with P,N Schiff-base ligands: Synthesis, characterization and catalytic oligomerisation of ethylene

New N-functionalised 2-phosphinobenzaldimino (P^N) ligands bearing 3-picolyl, furfuryl, thiophene-2-methyl, thiophene-2-ethyl, and benzyl groups have been prepared in good yield. The 2-phosphinobenzaldimino ligands were reacted with PdCl₂(COD) to give the corresponding metal complexes of the type Pd(L)Cl₂ (L = 2-phosphinobenzaldimino (P^N) ligand). All compounds were fully characterized using spectroscopic and analytical techniques, including ¹H, ¹³C, and ³¹P NMR and IR spectroscopies, mass spectrometry and elemental analysis. Selected neutral palladium complexes were evaluated as catalyst precursors in ethylene oligomerisation reactions, after activation with a co-catalyst (MMAO, EtAlCl₂, or Et₂AlCl).     

Phosphinerhodium complexes as homogeneous catalysts : VIII. Enantioselective hydrogenation of ketones: evidence for several mechanisms with catalysts containing diop

Optical yields obtained in the hydrogenation of acetophenone with cationic and in situ rhodium complex catalysts depend on the P/Rh ratio and on the ionic or non-ionic character of the active species. The enantioselectivity of the in situ catalyst containing (+)-DIOP is reversed by addition of achiral tri-n-alkyl-phosphines. On the basis of these observations and the amount of H₂ consumed in preforming the catalysts, several different mechanisms are suggested: for example: cycles involving cationic rhodium complexes containing two (or three) phosphorus ligands and cycles involving non-ionic rhodium complexes with two phosphorus ligands in cis or trans positions. In the in situ catalyst with a Rh/(+)-DIOP/P-n-Bu₃  1/1/1 ratio (+)-DIOP functions as a monodentate ligand.     

Intramolecularly Stabilised Group 10 Metal Stannyl and Stannylene Complexes: Multi‐pathway Synthesis and Observation of Platinum‐to‐Tin Alkyl Transfer

Reaction of [PdClMe(P^N)₂] with SnCl₂ followed by Cl‐abstraction leads to apparent Pd?C bond activation, resulting in methylstannylene species trans‐[PdCl{(P^N)₂SnClMe}][BF₄] (P^N=diaryl phosphino‐N‐heterocycle). In contrast, reaction of Pt analogues with SnCl₂ leads to Pt?Cl bond activation, resulting in methylplatinum species trans‐[PtMe{(P^N)₂SnCl₂}][BF₄]. Over time, they isomerise to methylstannylene species, indicating that both kinetic and thermodynamic products can be isolated for Pt, whereas for Pd only methylstannylene complexes are isolated. Oxidative addition of RSnCl₃ (R=Me, Bu, Ph) to M⁰ precursors (M=Pd or Pt) in the presence of P^N ligands results in diphosphinostannylene pincer complexes trans‐[MCl{(P^N)₂SnCl(R)}][SnCl₄R], which are structurally similar to the products from SnCl₂ insertion. This showed that addition of RSnCl₃ to M⁰ results in formal Sn?Cl bond oxidative addition. A probable pathway of activation of the tin reagents and formation of different products is proposed and the relevancy of the findings for Pd and Pt catalysed processes that use SnCl₂ as a co‐catalyst is discussed.     

Hydrodechlorination of 4-Chlorophenol on Pd-Fe Catalysts on Mesoporous ZrO2SiO2 Support

A mesoporous support based on silica and zirconia (ZS) was used to prepare monometallic 1 wt% Pd/ZS, 10 wt% Fe/ZS, and bimetallic FePd/ZS catalysts. The catalysts were characterized by TPR-H₂, XRD, SEM-EDS, TEM, AAS, and DRIFT spectroscopy of adsorbed CO after H₂ reduction in situ and tested in hydrodechlorination of environmental pollutant 4-chlorophelol in aqueous solution at 30 °C. The bimetallic catalyst demonstrated an excellent activity, selectivity to phenol and stability in 10 consecutive runs. FePd/ZS has exceptional reducibility due to the high dispersion of palladium and strong interaction between FeOx and palladium, confirmed by TPR-H₂, DRIFT spectroscopy, XRD, and TEM. Its reduction occurs during short-time treatment with hydrogen in an aqueous solution at RT. The Pd/ZS was more resistant to reduction but can be activated by aqueous phenol solution and H₂. The study by DRIFT spectroscopy of CO adsorbed on Pd/ZS reduced in harsh (H₂, 330 °C), medium (H₂, 200 °C) and mild conditions (H₂ + aqueous solution of phenol) helped to identify the reasons of the reducing action of phenol solution. It was found that phenol provided fast transformation of Pd⁺ to Pd⁰. Pd/ZS also can serve as an active and stable catalyst for 4-PhCl transformation to phenol after proper reduction.     

Iminophosphine palladium catalysts for Suzuki carbonylative coupling reaction

Three iminophosphine ligands having soft phosphorus and hard nitrogen atoms and their Pd(II) complexes were synthesized and characterized using ¹H NMR, ¹³C NMR, ³¹P NMR and Fourier transform infrared spectroscopic techniques. Also, electrochemical properties of the iminophosphines and their Pd(II) complexes were investigated in acetonitrile–tetrabutylammonium perchlorate solution with cyclic and square wave voltammetry techniques. All Pd(II) complexes were evaluated as catalysts for carbonylative cross‐coupling reactions of aryl iodides with phenylboronic acid. The Suzuki carbonylation of aryl iodides at 80 °C under balloon pressure of carbon monoxide in the presence of K₂CO₃ as a base was examined, and good to high conversions and excellent selectivities were obtained.     

Polycondensation of haloarylketones catalyzed by palladium compounds bearing N-heterocyclic carbene (NHC) ligands

Palladium-catalyzed α-arylation of ketones, which can efficiently give coupling products by using appropriate ligands and bases, could be applied to a polycondensation reaction. Stable N-heterocyclic carbenes (NHC) were used as favorable ligands coordinating the Pd catalysts, which were generated in situ from commercially available palladium compounds such as Pd(OAc)₂ and Pd₂(dba)₃ as suitable catalyst precursors in this polymerization. Using small amounts of binary catalysts, poly(aryl alkyl ketone)s were afforded in high yields from haloarylketones in the presence of a base. A primarily prepared palladium catalyst having an NHC ligand, [Pd(OAc)₂(NHC)], also efficiently catalyzed the polycondensation, whereas a palladium compound bearing two carbene ligands, [PdX₂(NHC)₂], did not.     

Bulky iminophosphine-based nickel and palladium catalysts bearing 2,6-dibenzhydryl groups for ethylene oligo-/polymerization

A series of 2,6-dibenzhydryl substituted bulky Ni and Pd complexes containing P,N-chelating ligands, {[2,6-(Ph₂CH)₂-4-R-C₆H₂-N=CH-C₆H₄-2-PPh₂]MX₂; MX₂ =NiBr₂; R = Me ( Ni1 ); R = F ( Ni2 ); MX₂ =PdCl₂, R = Me ( Pd1 )}, have been prepared and used as catalyst precursors for ethylene oligo-/polymerization. Compared to the corresponding 2,6-diisopropyl Ni catalyst, these bulky Ni precatalysts activated by Et₂AlCl exhibited excellent catalytic performance toward ethylene polymerization with activity of up to 1.90 × 10⁵ g PE (mol Ni)⁻¹ h⁻¹, and result in semicrystalline PEs with high molecular weight. The catalytic performance of these bulky P,N-type complexes was significantly improved by introducing two ortho-dibenzhydryl on the N-aryl substituents. However, the formation of C₁₀–C₂₄ oligomers were generated using their palladium catalysts through ethylene oligomerization at high temperatures.     

Effect of 5-Me substituent(s) on the catalytic activity of palladium(II) 2,2-bipyridine complexes in CO/4-tert-butylstyrene copolymerization

The coordination of two 5-substituted-2,2^′-bipyridines L (L¹=5-methyl-2,2^′-bipyridine, L²=5,5^′-dimethyl-2,2^′-bipyridine) to palladium was studied. The neutral complexes [Pd(L)Cl₂] and [Pd(L)(Me)Cl], and the cationic complexes obtained after chlorine abstraction [Pd(L)₂][BAr^′₄]₂ and [Pd(L)(Me)(NCMe)][BAr^′₄] (Ar^′=3,5-(CF₃)₂-C₆H₃), respectively, were isolated and characterized by NMR and FAB mass spectroscopy. The complex [Pd(L²)(L³)][BAr^′₄]₂ (L³=2,2^′-bipyridine) bearing different ligands, was prepared for comparison purposes. The activity of the monocationic and dicationic complexes as catalytic precursors in the CO/4-tert-butylstyrene copolymerization was compared with that of related well-known catalysts containing the unsubstituted 2,2^′-bipyridine as nitrogen ligand, to evaluate the influence of the substituents in 5- and 5,5^′-position. The presence of one or two substituents on the nitrogen ligand has a positive effect on productivity using both types of precursors. No influence was observed on the polymer properties in terms of molecular weight and tacticity. Analysis of the reactivity of the methyl-palladium complexes towards carbon monoxide shows further differences depending on the nitrogen ligand.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

Intramolecular hydroamination catalysed by Ag complexes stabilised in situ by bidentate ligands

A series of silver complexes generated in situ from AgOSO₂CF₃ (AgOTf) and a range of bidentate ligands were investigated as catalysts for the intramolecular hydroamination of 4-pentyn-1-amine. A variety of P- and N-donor ligands were tested including the novel pyrazole-phosphine ligand 1-(2-(diphenylphosphino)phenyl)pyrazole. The best catalyst was formed from equimolar amounts of the P,N-donor ligand 1-(2-(diphenylphosphino)ethyl)pyrazole and AgOTf, which achieved a turnover rate of 129 h⁻¹ for the cyclisation of 4-pentyn-1-amine.     

Ethylene polymerization with imine and phosphine nickel complexes containing isothiocyanate

Three isothiocyanate complexes of nickel(II) containing diimine [ArN?C(Me)? C(Me)?NAr]Ni‐ (NCS)₂ (1), iminophosphine [Ph₂PC₆H₄CH?NAr]Ni(NCS)₂ (2), or diphosphine (dppe)Ni(NCS)₂ (3), [Ar = 2, 6‐ⁱPr‐C₆H₃; dppe = 1, 2‐bis(diphenylphosphine)ethane] were synthesized and examined for ethylene polymerization activated by methylaluminoxane (MAO). Their behavior was compared with those of the corresponding halide analogues [ArN?C(Me)? C(Me)?NAr]NiBr₂ (4), [Ph₂PC₆H₄CH?NAr]NiBr₂ (5), and (dppe)NiCl₂ (6). The diimines showed the highest polymerization activity. Replacement of the halide for the NCS pseudo halide affected the activity and decreased the molecular weight of the polymer formed. The highest molecular weights were obtained with the diimine complexes. Highly branched polyethylenes were obtained with the bulkier complexes 1 and 4. Replacement of the halide for NCS in the diimine complexes also caused an increase in the branching content, whereas the opposite occurs for the iminophosphine complexes. The different activities and behavior of the catalyst systems with halide versus NCS in the polymerization of ethylene and the characteristics of the final products suggest a modification in the active species caused by the non‐chelating ligand. Polymer molecular weight and branching content is dependent on the MAO/Ni molar ratio and on the working temperature. Copyright © 2004 John Wiley & Sons, Ltd.     

Electrochemical evaluation of a number of nickel complexes with P,N-heterocyclic ligands as catalysts for hydrogen oxidation/release

The efficiency of a series of nickel complexes of P,N-cyclic ligands (potential catalysts in hydrogen fuel cells) in the electrocatalytic reduction of H+ to hydrogen and the oxidation of H₂ in the coordination shell/cavity of the catalyst in DMF (acetonitrile with variable nickel: ligand ratio (1: 1, 1: 2) and different counterions (X=Cl⁻ and BF₄⁻)) was tested, and the most favorable conditions and structures were determined. The relation between the activity of the catalysts and the values of the electrochemical gap was found.     

Ligand Exchange in Pd(II)-NaCl-H<Subscript>2</Subscript>O and Pd(II)-HCl-H<Subscript>2</Subscript>O Systems: Quantum-Chemical Consideration

The behavior of potassium tetrachloropalladate(II) in media simulating biological liquids is studied. The rate of aquation in aqueous NaCl solutions is shown to be higher than the rate at which the Cl^? ligand enters the inner coordination sphere of the Pd atom. In HCl solutions, the formation of the Pd chloro complexes predominates due to protonation of water molecules in the composition of aqua complexes. The reactions of replacement of the ligands (H₂O molecules and H₃O⁺ ion) in the planar Pd(II) complexes by the chloride ion are studied by the ZINDO/1 method. All the complexes containing H₂O and H₃O⁺ ligands, except for [Pd(H₂O)₄]²⁺, contain intramolecular hydrogen bonds. The ZINDO/1 and RHF/STO-6G(d) calculations revealed “nonclassic” symmetrical O? H?O hydrogen bond in the [[Pd(H₂O)₃(H₃O)]³⁺ and trans-[Pd(H₂O)₂(H₃O)Cl]²⁺ complexes. The replacement of the H₃O⁺ ion by the Cl^? ion at the first three steps is thermodynamically more advantageous than the displacement of water molecules from the metal coordination sphere. The logarithms of stepwise stability constants of Pd(II) chloro complexes are found to correlate linearly with the enthalpies (ZINDO/1, PM3) of reactions of H₂O replacement by Cl^?.     

Influence of chelate ring size on the properties of phosphine-sulfonate palladium catalysts

Phosphine-sulfonate based palladium is one of the most extensively studied catalyst systems in olefin polymerization.This type of catalyst features six-membered chelate ring size,and can enable the copolymerizations of ethylene with a wide variety of polar monomers.In this contribution,we decide to investigate the influence of chelate ring size on the properties of phosphinesulfonate palladium catalysts.As such,a series of phosphine-sulfonate ligands and the corresponding seven-membered ring Pd(II)complexes[κ~2-(P,O)-2-(CH_2-PR_1R_2)-4-methylphenyl-sulfonato]Pd(Me)(DMSO)(Pd1,R_1=R_2=Cy,Pd2,R_1=R_2=o-Me O-C_6H_4;Pd3,R_1=Ph,R_2=2-[2,6-(Me O)_2C_6H_3]C_6H_4;DMSO=dimethyl sulfoxide)were designed,prepared and characterized.These palladium complexes are moderately active when they were applied in ethylene polymerization and copolymerizations with methyl acrylate and butyl vinyl ether.However,their properties are greatly reduced from those of the classic six-membered ring phosphine-sulfonate palladium complex Pd2′.The experimental results indicate that the bigger chelate ring size can increase the ligand flexibility and damage the catalytic properties for the phosphine-sulfonate type palladium catalysts.     

Highly Efficient Transfer Hydrogenation Catalysis with Tailored Pyridylidene Amide Pincer Ruthenium Complexes

The rational optimization of homogeneous catalysts requires ligand platforms that are easily tailored to improve catalytic performance. Here, it is demonstrated that pyridylidene amides (PYAs) provide such a platform to custom-shape transfer hydrogenation catalysts with exceptional activity. Specifically, a series of meta-PYA pincer ligands with differently substituted PYA units has been synthezised and coordinated to ruthenium(II) centres to form bench-stable tris-acetonitrile complexes [Ru(R-PYA-pincer)(MeCN)₃](PF₆)₂ (R=OMe, Me, H, Cl, CF₃). Analytic studies including ¹H NMR spectroscopy, cyclic voltammetry, and X-ray crystallography reveal a direct influence of the substituents on the electronic properties of the ruthenium center. The complexes are active in the catalytic transfer hydrogenation of ketones, with activities directly encoded by the PYA substitution pattern. Their perfomance improves further upon exchange of an ancillary MeCN ligand with PPh₃. While complexes [Ru(R-PYA-pincer)(PPh₃)(MeCN)₂](PF₆)₂ were only isolated for R=H, Me, an in situ protocol was developed to generate these complexes in situ for R=OMe, Cl, CF₃ by using a 1:2 ratio of the complexes and PPh₃. This in situ protocol together with a short catalyst pre-activation provided highly active catalytic systems. The most active pre-catalyst featured the methoxy-substituted PYA ligand and reached turnover frenquencies of 210 000 h⁻¹ under an exceptionally low catalyst loading of 25 ppm for the benchmark substrate benzophenone, representing one of the most active transfer hydrogenation systems known to date.     

Allylic alkylation and amination using mixed (NHC)(phosphine) palladium complexes under biphasic conditions

A dramatic improvement of the catalytic activity was observed when a phosphine was added in allylic alkylation reactions catalyzed by (NHC)Pd(η³-C₃H₅)Cl complexes. Consequently, several palladium complexes, generated in situ from different NHC-silver complexes, [Pd(η³-C₃H₅)Cl]₂ and PPh₃, were tested in this reaction to evaluate their potential. High reaction rates and conversions could be obtained with this catalytic system in the alkylation of allylic acetates with dimethylmalonate, particularly under biphasic conditions using water/dichloromethane and KOH 1 M as the base. These conditions are experimentally more convenient and gave higher reaction rates than the classical anhydrous conditions (NaH/THF). In this system, the phosphine is essential since no conversion was obtained when it is not present. The steric hindrance of the carbene ligand has a great influence on the activity and the stability of the catalytic system. The best NHC ligands for this reaction are either 1-mesityl-3-methyl-imidazol-2-ylidene or 1-(2,6-diisopropylphenyl)-3-methyl-imidazol-2-ylidene which are less bulky among the NHC tested. These two ligands led in 5 min to a complete conversion at 20 °C. The Pd-catalyzed allylic amination reaction using (E)-1,3-diphenylprop-3-en-yl acetate and benzylamine was also tested with (NHC)(PPh₃)Pd complexes and under the biphasic conditions. This reaction was found to be slower than the alkylation with dimethylmalonate but a complete conversion could be reached in 6 h at 20 °C using K₂CO₃ 1 M as the base. NMR experiments indicated that mixed (NHC)(PPh₃)Pd complexes are formed in situ but their structure could not be established exactly.     

Synthetic and structural studies of NHC–Pt(dvtms) complexes and their application as alkene hydrosilylation catalysts (NHC = N-heterocyclic carbene,dvtms = divinyltetramethylsiloxane)

The synthesis and structural characterization of a series of platinum complexes, bearing N-heterocyclic carbenes (NHC) and divinyltetramethylsiloxane (dvtms) as supporting ligands, are described. The reaction of commercially available Karstedt’s catalyst (Pt₂{(η²-ViSiMe₂)₂O}₃) with in situ generated NHC leads to monomeric platinum(0) complexes in which one NHC is bound to the metal center, as indicated by spectroscopic analysis and single-crystal X-ray diffraction studies. The relative reactivity trend for these complexes as catalysts for the hydrosilylation of alkenes is discussed in terms of NHC ligand steric properties.     

Pd–Fe/TiO2 catalysts for phenol degradation with in situ generated H2O2

This study deals with the degradation of phenol over Pd–Fe/TiO₂ catalysts at mild conditions in the presence of in situ generated H₂O₂ from oxygen and formic acid. This catalytic system demonstrated interesting ability to oxidize phenol by Fenton process in a one-pot reaction without the addition of ferrous ion. Lower Pd content catalysts, despite producing a higher hydrogen peroxide amount for bulk purposes, did not reach the same efficiency as the 5Pd–5Fe catalyst in phenol degradation. A close interaction between Pd and iron oxide species is necessary to obtain high active catalysts. These results highlight the advantage of in situ generation of H₂O₂, for oxidation reactions with respect to conventional Fenton process.     

Catalytic Removal of NOx from Gas Mixtures Simulating Emissions from the Combustion of Biofuels

The activity of knitted silica-fibre supported Pd, Pt, Pt-Ni, Pd-Ni and Pd-Pt-Ni catalysts as well as Pd based H-ZSM-5 and H-ZSM-35 catalysts was studied in the conversion of gas mixtures containing 200 ppm CH₄, 2500 ppm CO, 500 ppm pyridine (or 500 ppm NO), 10 vol.% O₂ (or 0.155 vol.% O₂), 12 vol.% CO₂, 12 vol.% H₂O, balanced with He at GHSV of 60000 h^–1. Pyridine was found to inhibit both CO and CH₄ oxidation. IR studies indicated that NO adsorbed on Pd²⁺ is the principal adsorbed species on the Pd/HZSM-5 catalyst.