Strontium-doped hardystonite plasma sprayed coatings with robust antimicrobial activity

A strontium-doped hardystonite (Sr-HT) bioceramic, in bulk form, demonstrates excellent bioactivity for bone regeneration with high fracture toughness and compressive strength. This work examines the antibacterial and mechanical properties of Sr-HT coatings on an alpha-beta titanium alloy with a high specific strength and excellent corrosion resistance (Ti-6Al-4V) produced by atmospheric plasma spray (APS) as the deposition coating technique. A hydroxyapatite (HAp) APS coating, a commercial bioceramic coating, is chosen as the control. The in-situ observation showed that Sr-HT powders experience temperatures during plasma processing that exceeded their melting point to form a coating well adhered to the substrate. It was demonstrated that the Sr-HT coating possessed superior antibacterial properties against Gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and Gram-negative Pseudomonas aeruginosa. In addition, the Sr-HT coating exhibits a uniform distribution of hardness and elastic moduli, higher nanohardness and elastic moduli compared to the equivalent properties of the HAp coating. Moreover, the Sr-HT coating outperforms the HAp coating regarding scratch and wear resistance. The bonding and shear strength of the Sr-HT coating are higher than the values required for orthopedic implant coatings. The Sr-HT coating also allows efficient zinc, silicon and strontium ions release when immersed in cell culture media. In summary, the antibacterial capabilities and the mechanical properties of the Sr-HT APS coating exceed those of the commercial HAp APS coating. Therefore, Sr-HT APS coatings are candidates for bioceramic coating applications in orthopedic implants.     

Correlation between structure and stress-strain characteristics of metallic coatings deposited onto a polymer by the method of ionic plasma sputtering

Data on the strength of coatings based on noble metals (Pt, Au) deposited onto PET films by the method of ionic plasma sputtering are analyzed. In addition to precipitation of the metal, this mode of deposition is accompanied by modification of the surface polymer layer due to its interaction with plasma. As a result, a complex three-layered structure near the polymer surface forms. A new method for estimating the strength of coatings deposited onto polymer supports is advanced. This method makes it possible to analyze stress-strain characteristics of the three-layered systems that emerge owing to deposition of nanoscale layers of noble metals on polymer films via ionic plasma sputtering. The proposed relationships are in fair agreement with the experimental data.     

电化学方法在钛表面制备Co-YSZ/HAp纳米复合涂层

采用复合电沉积和电泳沉积两步法在钛基体上制备了Co-YSZ/HAp纳米复合涂层, 与只采用电泳沉积法在钛基体上制备纳米HAp单一涂层进行了比较研究.采用场发射扫描电镜、X 射线衍射和能量散射谱对复合涂层的微观形貌, 纳米HAp外层表面形貌, 晶相, 复合涂层的断面形貌及元素组成分布进行分析研究. 通过粘结-拉伸实验测定了涂层与基体的结合强度, 结果表明, Co-YSZ/HAp 纳米复合涂层与钛基体的结合强度明显高于纳米HAp 单一涂层与钛基体的结合强度, 说明复合涂层具有更好的力学性能.     

Electrochemical Study of the Interactions of DNA with Redox‐Active Molecules Based on the Immobilization of dsDNA on the Sol‐Gel Derived Nano Porous Hydroxyapatite‐Polyvinyl Alcohol Hybrid Material Coating

A novel type of sol‐gel inorganic‐organic hybrid material coated on glassy carbon electrode used for immobilization of double‐stranded DNA (dsDNA) and study of dsDNA with redox‐active molecules was developed. The hybrid material coating was produced by sol‐gel method with nano hydroxyapatite (HAp)‐polyvinyl alcohol (PVA). The optimum composition of the hybrid material was first examined, and the morphology of the nano HAp‐PVA coatings was investigated with the help of Scanning Electron Microscope (SEM). DsDNA was immobilized in/on the nano HAp‐PVA hybrid coatings by adsorption and the characteristics of the dsDNA/HAp‐PVA/GCE were studied by cyclic voltammetry (CV) using the probes of Co(phen) and Fe(CN) . The results indicate that the dsDNA can be immobilized on the nano porous HAp‐PVA coating effectively and its stability can satisfy the necessity of study on the interactions of dsDNA with redox‐active molecules on the electrode surface. Co(bpy) and Co(phen) were used as the model molecule to study the interactions of dsDNA with redox‐active molecules. Information such as ratio (K_Ox/K_Red) of the binding constant for the oxidized and reduced forms of a bound species, interaction mode, including change in the mode of interaction, and “limiting” ratio K /K at zero ionic strength (μ) can be obtained using dsDNA/HAp‐PVA/GCE with about 2 μg of DNA samples.     

Sol–gel synthesis of IPTES and D10H consisting fluorinated silane system for hydrophobic applications

In this study, new fluorinated silane system was prepared by adding hydroxyl terminated Fluorolink D10H oligomer to 3-isocyanatopropyltrietoxysilane. The obtained silane system was independently composed with 3-Glycidyloxypropyltrimethoxysilane and 3-Glycidyloxy-propyltriethoxysilane. Then the prepared two different coating solutions were applied to glass surface by spin-coating method. The chemical bonding between groups in system was investigated by FTIR analysis. The elemental composition of coatings was determined by using EDX analysis. Their structure and surface properties were analyzed by scanning electron microscopy, atomic force microscopy, contact angle measurement and UV–vis spectrophotometer. The amounts of fluorine on the coatings prepared with IPTES-D10H-GLYEO and IPTES-D10H-GLYMO were 33 and 34 %wt, respectively. Transparent coatings with smooth surface and uniform thickness were obtained. The coatings had nanoscale roughness. The contact angles of coatings for water were range from 103° to 110°, and for n-hexadecane were range from 59° to 62°.     

Synthesis of BN coatings on carbon fiber by dip coating

BN coatings were deposited on carbon fibers by dip coating method. The deposited coatings were characterized by scanning electron microscopy, Fourier‐transformed infrared spectroscopy, X‐ray photoelectron spectroscopy and X‐ray diffraction. The influence of temperature on composition and structure of the coatings was investigated. Composition and structure examinations revealed that the crystallinity of the coatings increased with the increasing temperature, and the coating is a mixture of little oxides, turbostratic boron nitride and hexagonal boron nitride. Furthermore, experiments were also conducted in order to describe the growth mechanism, thus forming the basis of future growth of BN coating on fibers by dip coating. Copyright © 2016 John Wiley & Sons, Ltd.     

Micro-PIXE analysis of bioconductive hydroxyapatite coatings on titanium alloy

Bioconductive materials and in particular implants using Ti alloy (Ti6–Al4–V) coated with hydroxyapatite (HAp) have proved to be a suitable surgical procedure. However, experience has shown that these implants not always have the required reliability to guarantee their expected life-span of approximate 15 years. In this research, experimental Ti alloy-implants coated with HAp and incubated in a simulated body fluid (r-SBF) under controlled physiological conditions were studied by nuclear microprobe (NMP). Selected HAp coatings, were analysed by micro-PIXE using protons of 1.5 MeV at the iThemba LABS NMP facility. Major elements (Ti, Al, V, Ca and P) as well as trace elements (Si, K, Fe, Zn and Sr) were determined. The effect of longer incubation time was of particular interest. Results confirmed that secondary Ca-deficient defect hydroxyapatite precipitated from the simulated body solution onto the HAp coating surface after prolonged incubation. This newly formed layer is thought to be of vital importance for bonding of implants with living bone tissue.     

Sol–gel synthesis of 3-(triethoxysilyl)propylsuccinicanhydride containing fluorinated silane for hydrophobic surface applications

In this paper, novel fluorinated silane compound was prepared by adding hydroxyl terminated Fluorolink D10H oligomer to 3-(triethoxysilyl)propylsuccinicanhydride. The obtained silane system was independently composed with 3-Aminopropyltrimethoxysilane, 3-Glycidyloxypropyltrimethoxysilane and 3-Glycidyloxypropyltriethoxysilane and, then the prepared coating solutions were applied to glass surface by spin-coating method. The chemical bonding between groups in system was investigated by Fourier Transform Infrared Spectroscopy analyses. The elemental composition of coatings was determined using Energy Dispersive X-ray Spectroscopy analyses. Its structure and surface properties were analyzed by scanning electron microscopy, atomic force microscopy, contact angle measurement and Ultraviolet–visible Absorption Spectroscopy. The amounts of fluorine on the coatings prepared with GF20-D10H-AMMO, GF20-D10H-GLYEO and GF20-D10H-GLYMO are 31, 32 and 34% at, respectively. Transparent coatings with smooth surface and uniform thickness were observed. The coatings had nanoscale roughness. The contact angles of coatings for water ranged from 88 to 107^o, and that of n-hexadecane ranged from 53 to 60^o.     

In vitro evaluation of new biocompatible coatings for solid-phase microextraction: Implications for drug analysis and in vivo sampling applications

A new line of solid-phase microextraction (SPME) coatings suitable for use with liquid chromatography applications was recently developed to address the limitations of the currently available coatings. The proposed coatings were immobilized on the metal fiber core and consisted of a mixture of proprietary biocompatible binder and various types of coated silica (octadecyl, polar embedded and cyano) particles. The aim of this research was to perform in vitro assessment of these new SPME fibers in order to evaluate their suitability for drug analysis and in vivo SPME applications. The main parameters examined were extraction efficiency, solvent resistance, preconditioning, dependence of extraction kinetics on coating thickness, carryover, linear range and inter-fiber reproducibility. The performance of the proposed coatings was compared against commercial Carbowax-TPR (CW-TPR) coating, when applicable. The fibers were evaluated for the extraction of drugs of different classes (carbamazepine, propranolol, pseudoephedrine, ranitidine and diazepam) from plasma and urine. The analyses were performed using liquid chromatography-tandem mass spectrometry. The results show that the fibers perform very well for the extraction of biological fluids with no sample pre-treatment required and can also be used for in vivo sampling applications of flowing blood. A coating thickness of 45 μm was found to be a good compromise between extraction capacity and extraction kinetics. Due to the high extraction efficiency of these coatings, pre-equilibrium SPME with very short extraction times (2 min) can be employed to increase sample throughput. Inter-fiber reproducibility was ≤11% R.S.D. (n = 10) for model drugs examined in plasma, which is a significant improvement over polypyrrole coatings reported in literature, and permits single fiber use for in vivo applications.     

In situ mineralization of hydroxyapatite on electrospun chitosan-based nanofibrous scaffolds

A biocomposite of hydroxyapatite (HAp) with electrospun nanofibrous scaffolds was prepared by using chitosan/polyvinyl alcohol (CS/PVA) and N-carboxyethyl chitosan/PVA (CECS/PVA) electrospun membranes as organic matrix, and HAp was formed in supersaturated CaCl2 and KH2PO4 solution. The influences of carboxylic acid groups in CECS/PVA fibrous scaffold and polyanionic additive poly(acrylic acid) (PAA) in the incubation solution on the crystal distribution of the HAp were investigated. Field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) were used to characterize the morphology and structure of the deposited mineral phase on the scaffolds. It was found that addition of PAA to the mineral solution and use of matrix with carboxylic acid groups promoted mineral growth and distribution of HAp. MTT testing and SEM imaging from mouse fibroblast (L929) cell culture revealed the attachment and growth of mouse fibroblast on the surface of biocomposite scaffold, and that the cell morphology and viability were satisfactory for the composite to be used in bioapplications.     

Facile fabrication of novel cobalt-based carbonaceous coatings on nickel-titanium alloy fiber substrate for selective solid-phase microextraction

Fabrication of selective adsorption coatings plays a crucial role in solid-phase microextraction(SPME).Herein, new strategies were developed for the in-situ fabrication of novel cobalt-based carbonaceous coatings on the nickel-titanium alloy(Ni Ti) fiber substrate using ZIF-67 as a precursor and template through the chemical reaction of ZIF-67 with glucose, dopamine(DA) and melamine, respectively. The adsorption performance of the resulting coatings was evaluated using representative aromatic co...     

N-halamine biocidal coatings via a layer-by-layer assembly technique

Two N-halamine copolymer precursors, poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-acrylic acid potassium salt) and poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-trimethyl-2-methacryloxyethylammonium chloride) have been synthesized and successfully coated onto cotton fabric via a layer-by-layer (LbL) assembly technique. A multilayer thin film was deposited onto the fiber surfaces by alternative exposure to polyelectrolyte solutions. The coating was rendered biocidal by a dilute household bleach treatment. The biocidal efficacies of tested swatches composed of treated fibers were evaluated against Staphylococcus aureus and Escherichia coli. It was determined that chlorinated samples inactivated both S. aureus and E. coli O157:H7 within 15 min of contact time, whereas the unchlorinated control samples did not exhibit significant biocidal activities. Stabilities of the coatings toward washing and ultraviolet light exposure have also been studied. It was found that the stability toward washing was superior, whereas the UVA light stability was moderate compared to previously studied N-halamine moieties. The layer-by-layer assembly technique can be used to attach N-halamine precursor polymers onto cellulose surfaces without using covalently bonding tethering groups which limit the structure designs. In addition, ionic precursors are very soluble in water, thus promising for biocidal coatings without the use of organic solvents.     

Superior corrosion protection and in vitro biocompatibility of Na-HAp/CS composite coating on PoPD-coated 316L SS

The synthesis and development of sodium (Na)-substituted hydroxyapatite (HAp)/chitosan (CS) composite using poly (O-phenylenediamine) (PoPD) coating on 316L SS substrate for improving bioactivity and corrosion protection was studied. The surface of Na-HAp/CS/PoPD bilayer coatings on 316L SS substrate was characterized by diverse analytical techniques. The open circuit potential (OCP) measurement, potentiodynamic polarization, and impedance test revealed that the bilayer coating provides excellent protection to the substrate against the corrosion in the simulated body fluid (SBF) solution. This interior layer of the coating acts as a barrier against the release of metal ions from the substrate, which was confirmed by inductively coupled plasma-atomic emission spectroscopy. Besides, the mechanical properties of the coatings were analyzed. From the obtained results, the bilayer coating exhibited greater mechanical strength than the individual coating. An in vitro bioactivity of the coatings was assessed by immersion in the SBF solution at 7–28 days. The apatite formation of bilayer coatings on 316L SS substrate is found to be more bioactive compared with the Na-HAp, PoPD, and Na-HAp/CS. The in vitro biocompatibility test showed no adverse effects, which was proved by the enhanced biocompatibility of the bilayer coating on 316L SS.     

Design of anti-icing coatings using supercooled droplets as nano-to-microscale probes

A multiscale simulation-based approach is presented for predicting anti-icing properties of nanocomposite coatings. Development of robust anti-icing coatings is a challenging task. An anti-icing coating that can prevent in-flight icing is of particular interest to the aircraft industry. A multiscale simulations based approach is developed to provide insights into the complex effect of coating material and surface topology on the prevention of in-flight icing. Chemical properties of different coatings and kinetics of icing or inhibition of ice nucleation are calculated from nanoscale atomistic simulations. In addition, in-flight icing environments including impingement and rolling of supercooled microdroplet and nucleation of ice under wind shear have been implemented using fluid dynamics methodologies. A model for icing in nano-to-microscale for surfaces with known chemical composition and surface topology is used for developing predictive capabilities regarding anti-icing performance of potential coatings. In this work, fluorinated polyhedral oligomericsilsesquioxanes molecules have been used to increase nanoscale roughness when embedded in a polycarbonate polymeric matrix. The findings suggest that a successful anti-icing coating will require precise control over nanoscale and microscale roughness. The multiscale methodology presented therefore can potentially help in identifying coupled effects of material, surface topology, and icing environment for promising coatings before performing icing tunnel experiments.     

Characterization of hydroxyapatite by electron microscopy.

The obtention of hydroxyapatite (HAp) is reported using brushite (CaHPO4.2H2O) and the skeleton of a starfish (Mellita eduardobarrosoi sp. nov.), primarily composed of magnesian calcite ((Ca,Mg)CO3) as precursors. Stoichiometric amounts of both were reacted under hydrothermal conditions: a pressure of 5.8 MPa and a temperature of 200 degrees C for 2, 4, 6, 8, 10, and 20 h of reaction times. The samples obtained were characterized by means of scanning electron microscopy, X-ray diffraction, infrared spectroscopy, and transmission electron microscopy. Two defined populations of HAp fibers were found: A bundle of fibers 75 mum in length and 1-13 mum in diameter, and a second bundle of fibers 5 mum in length and less than 0.5 mum in diameter. Furthermore, an increase in HAp formation and a Ca/P ratio as a function of reaction time were observed. The growth mechanism of HAp is also discussed.     

Effect of microstructure and surface roughness on the wettability of superhydrophobic sol–gel nanocomposite coatings

Sol–gel nanocomposite coatings were fabricated by spraying precursor mixtures containing hydrophobically modified silica (HMS) nanoparticles dispersed in sol–gel matrices prepared with acid-catalyzed tetraethoxysilane (TEOS), and methyltriethoxysilane (MTEOS). The hydrophobicity of the coatings increased with increase in the concentration of HMS nanoparticles. Superhydrophobic coatings with water contact angle (WCA) of 166° and roll-off angle <2° were obtained by optimizing the sol–gel processing parameters and the concentration of silica nanoparticles in the coating. FESEM studies have shown that surface has a micro-nano binary structure composed of microscale bumps and craters with protrusions of nanospheres. The properties of composite coatings fabricated by spin coating and spray coating methods were compared. It was found that the microstructure and the wettability were also dependent on the method of application of the coating.     

石墨烯层层键合固相微萃取纤维的制备及对多环芳烃的检测

通过3-巯基丙基三甲氧基硅烷处理银层包裹的不锈钢纤维,得到Si-OH功能化的纤维,氧化石墨烯被层层键合到Si-OH功能化的纤维上,还原氧化石墨烯得到石墨烯层层键合的固相微萃取纤维。该方法制备的新型石墨烯层层键合的固相微萃取纤维具有制备简单,机械性能强,萃取涂层牢固,萃取能力强等优势。建立具有较宽线性范围(5~200μg/L)、较低检测限(0.007~0.09μg/L)的固相微萃取-气相色谱分析方法,用该方法测定河水和雨水中多环芳烃的含量。所制备的新型纤维重现性好、稳定性高、萃取能力强,可实现对多环芳烃的痕量检测。     

Silica/Silicone Nanofilament Hybrid Coatings with Almost Perfect Superhydrophobicity

A facile method for the preparation of silica/silicone nanofilament hybrid coatings with almost perfect superhydrophobicity (contact angle=179.8° and sliding angle=1.3°) is presented. The coatings are obtained by dip‐coating of silica nanoparticles, followed by chemical vapor deposition of silicone nanofilaments. Predominant growth of silicone nanofilaments onto aggregated silica nanoparticles generates a two‐tier structure. The effect of silica nanoparticle size on the growth of silicone nanofilaments, along with their anti‐wetting properties and transparency are investigated in detail. Surface roughness and anti‐wetting properties can be simply regulated by controlling the size of silica nanoparticles.     

Direct Synthesis of Hydroxyapatite-Silk Fibroin Nano-Composite Sol via a Mechanochemical Route

In the presence of fine silk cocoon (silk fibroin, SF) powder, a low viscosity sol of nano-hydroxyapatite (HAp, Ca₁₀(PO₄)₆(OH)₂)—SF was synthesized by a wet mechanochemical reaction. Nano crystals of HAp are oriented along their c-axis. The secondary structure of SF was changed by milling. A uniform thin gel film was obtained by a simple dip coating on the glass substrate precoated by chitosan.     

Magnetron sputtering Si interlayer: a protocol to prepare solid phase microextraction coatings on metal-based fiber

Use of metal fibers in solid phase microextraction (SPME) can overcome the fragility drawback of conventional fused-silica ones. However, the surface modification of metal substrates is rather difficult, which largely prevents many mature traditional techniques, such as sol-gel and chemical bonding, being used in fabrication of SPME coating on metal-based fibers. This study demonstrates a protocol to resolve this problem by magnetron sputtering a firm Si interlayer on stainless steel fiber. The Si interlayer was easily modified active group, and attached with a multiwalled carbon nanotubes (MWCNTs) coating using the reported approach. The as-prepared MWCNTs/Si/stainless steel wire fiber not only preserved the excellent SPME behaviors of MWCNTs coatings, but also exhibited a number of advantages including high rigidity, long service life, and good stability at high temperature, in acid and alkali solutions. This new surface modification technique might provide a versatile approach to prepare sorbent coatings on unconfined substrates using traditional methods.