A note on an EOQ model for deteriorating items under supplier credit linked to ordering quantity

This paper explores the inventory replenishment policy for deteriorating items in which the supplier provides a permissible delay to the purchaser if the order quantity is greater than or equal to a predetermined quantity. As a matter of fact, the inventory system discussed by this paper is the same as that of Chang et al. [C.T. Chang, L.Y. Ouyang, J.T. Teng, An EOQ model for deteriorating items under supplier credit credits linked to ordering quantity, Appl. Math. Model. 27 (2003) 983–996]. However, their approach in solving the problems needs further analysis. This article deals with an alternative approach to present a simple procedure in order to determine the optimal ordering policy when the supplier provides a permissible delay in payments linked to order quantity. Numerical examples reveal that the solution algorithm described in this paper is accurate and rapid.     

On an EPQ model for deteriorating items under permissible delay in payments

This paper derives a production model for the lot-size inventory system with finite production rate, taking into consideration the effect of decay and the condition of permissible delay in payments, in which the restrictive assumption of a permissible delay is relaxed to that at the end of the credit period, the retailer will make a partial payment on total purchasing cost to the supplier and pay off the remaining balance by loan from the bank. At first, this paper shows that there exists a unique optimal cycle time to minimize the total variable cost per unit time. Then, a theorem is developed to determine the optimal ordering policies and bounds for the optimal cycle time are provided to develop an algorithm. Numerical examples reveal that our optimization procedure is very accurate and rapid. Finally, it is shown that the model developed by Huang [1] can be treated as a special case of this paper.     

On an inventory model for deteriorating items and time-varying demand

In this paper, we present an optimal procedure for finding the replenishment schedule for the inventory system in which items deteriorate over time and demand rates are increasing over a known and finite planning horizon.     

An EOQ model for deteriorating items under trade credits

In the classical inventory economic order quantity (or EOQ) model, it was assumed that the supplier is paid for the items immediately after the items are received. However, in practices, the supplier may simultaneously offer the customer: (1) a permissible delay in payments to attract new customers and increase sales, and (2) a cash discount to motivate faster payment and reduce credit expenses. In this paper, we provide the optimal policy for the customer to obtain its minimum cost when the supplier offers not only a permissible delay but also a cash discount. We first establish a proper model, and then characterize the optimal solution and provide an easy-to-use algorithm to find the optimal order quantity and replenishment time. Furthermore, we also compare the optimal order quantity under supplier credits to the classical economic order quantity. Finally, several numerical examples are given to illustrate the theoretical results.     

An optimal production-inventory model for deteriorating items with multiple-market demand

The global markets of today offer more selling opportunities to the deteriorating items’ manufacturers, but also pose new challenges in production and inventory planning. From a production management standpoint, opportunities to exploit the difference in the timing of the selling season between geographically dispersed markets for deteriorating items are important to improving a firm’s profitability. In this paper, we examined the above issue with an insightful production-inventory model of a deteriorating items manufacturer selling goods to multiple-markets with different selling seasons. We also provided a solution procedure to find the optimal replenishment schedule for raw materials and the optimal production plan for finished products. A numerical example was then used to illustrate the model and the solution procedure. Finally, sensitivity analysis of the optimal solution with respect to major parameters was carried out.     

An economic order quantity model for deteriorating items with partially permissible delay in payments linked to order quantity

To attract more sales suppliers frequently offer a permissible delay in payments if the retailer orders more than or equal to a predetermined quantity W. In this paper, we generalize [Goyal, S.K., 1985. EOQ under conditions of permissible delay in payments. Journal of the Operational Research Society 36, 335–338] economic order quantity (EOQ) model with permissible delay in payment to reflect the following real-world situations: (1) the retailer’s selling price per unit is significantly higher than unit purchase price, (2) the interest rate charged by a bank is not necessarily higher than the retailer’s investment return rate, (3) many items such as fruits and vegetables deteriorate continuously, and (4) the supplier may offer a partial permissible delay in payments even if the order quantity is less than W. We then establish the proper mathematical model, and derive several theoretical results to determine the optimal solution under various situations and use two approaches to solve this complex inventory problem. Finally, a numerical example is given to illustrate the theoretical results.     

Deterministic inventory model for deteriorating items with capacity constraint and time-proportional backlogging rate

In this paper, a deterministic inventory model for deteriorating items with two warehouses is developed. A rented warehouse is used when the ordering quantity exceeds the limited capacity of the owned warehouse, and it is assumed that deterioration rates of items in the two warehouses may be different. In addition, we allow for shortages in the owned warehouse and assume that the backlogging demand rate is dependent on the duration of the stockout. We obtain the condition when to rent the warehouse and provide simple solution procedures for finding the maximum total profit per unit time. Further, we use a numerical example to illustrate the model and conclude the paper with suggestions for possible future research.     

The inventory model for trade credit in economic ordering policies of deteriorating items in a supply chain system

In 1994, professors Jaggi and Aggarwal presented the economic ordering policies of deteriorating items in the presence of trade credit using a discounted cash-flows (DCF) approach. This paper discusses the same problem as that of Jaggi and Aggarwal and indicates that some approximations to the optimal cycle times proposed by Jaggi and Aggarwal are inappropriate sometimes. A theorem is derived out to find the optimal cycle time. With that theorem, a simple algorithm is developed to locate the optimal cycle time.     

Optimal replenishment policies for deteriorating items with stock sensitive demand under two-level trade credit and limited capacity

Recently, Min et al. [18] established an inventory model for deteriorating items under stock-dependent demand and two-level trade credit and obtained the optimal replenishment policy. Their analysis imposed a terminal condition of zero ending-inventory. However, with a stock-dependent demand, it may be desirable to order large quantities, resulting in stock remaining at the end of the cycle, due to the potential profits resulting from the increased demand. As a result, to make the theory more applicable in practice, we extend their model to allow for: (1) an ending-inventory to be nonzero, (2) a maximum inventory ceiling to reflect the facts that too much stock leaves a negative impression on the buyer and the amount of shelf/display space is limited.     

The simplified solution procedure for deteriorating items under stock-dependent demand and two-level trade credit in the supply chain management

Min et al. [1] (J. Min, Y.W. Zhou, J. Zhao, An inventory model for deteriorating items under stock-dependent demand and two-level trade credit, Appl. Math. Model. 34 (2010) 3273–3285.) develop an inventory model for deteriorating items under stock-dependent demand and two-level trade credit. They provide the necessary and sufficient conditions of the existence and uniqueness of the optimal solutions that could maximize the retailer’s average profit per unit time. Basically, their paper is correct and interesting. Recently, several researchers have been showing a huge interest in developing simple and easy to implement solution procedures in management science. Therefore this paper indicates that Min et al.’s solution procedure can be further improved and simplified. So, the main purpose of this paper is to present simple and easy to understand solution procedures to locate the optimal solutions of an inventory model that considers deteriorating items under stock-dependent demand and two-level trade credit.     

Optimal credit period and lot size for deteriorating items with expiration dates under two-level trade credit financing

In a supplier-retailer-buyer supply chain, the supplier frequently offers the retailer a trade credit of S periods, and the retailer in turn provides a trade credit of R periods to her/his buyer to stimulate sales and reduce inventory. From the seller’s perspective, granting trade credit increases sales and revenue but also increases opportunity cost (i.e., the capital opportunity loss during credit period) and default risk (i.e., the percentage that the buyer will not be able to pay off her/his debt obligations). Hence, how to determine credit period is increasingly recognized as an important strategy to increase seller’s profitability. Also, many products such as fruits, vegetables, high-tech products, pharmaceuticals, and volatile liquids not only deteriorate continuously due to evaporation, obsolescence and spoilage but also have their expiration dates. However, only a few researchers take the expiration date of a deteriorating item into consideration. This paper proposes an economic order quantity model for the retailer where: (a) the supplier provides an up-stream trade credit and the retailer also offers a down-stream trade credit, (b) the retailer’s down-stream trade credit to the buyer not only increases sales and revenue but also opportunity cost and default risk, and (c) deteriorating items not only deteriorate continuously but also have their expiration dates. We then show that the retailer’s optimal credit period and cycle time not only exist but also are unique. Furthermore, we discuss several special cases including for non-deteriorating items. Finally, we run some numerical examples to illustrate the problem and provide managerial insights.     

Optimal policy for deteriorating items with trapezoidal type demand and partial backlogging

Inventory model for time-dependent deteriorating items with trapezoidal type demand rate and partial backlogging is considered in this paper. The demand rate is defined as a continuous trapezoidal function of time, and the backlogging rate is a non-increasing exponential function of the waiting time up to the next replenishment. We proposed an optimal replenishment policy for such inventory model, numerical examples to illustrate the solution procedure.     

Optimal deteriorating items production inventory models with random machine breakdown and stochastic repair time

This study develops deteriorating items production inventory models with random machine breakdown and stochastic repair time. The model assumes the machine repair time is independent of the machine breakdown rate. The classical optimization technique is used to derive an optimal solution. A numerical example and sensitivity analysis are shown to illustrate the models. The stochastic repair models with uniformly distributed repair time tends to have a larger optimal total cost than the fixed repair time model, however the production up time is less than the fixed repair time model. Production and demand rate are the most sensitive parameters for the optimal production up time, and demand rate is the most sensitive parameter to the optimal total cost for the stochastic model with exponential distribution repair time.     

Economic design of an inventory policy for non-instantaneous deteriorating items under permissible delay in payments

In this paper, Economic Order Quantity (EOQ) based model for non-instantaneous deteriorating items with permissible delay in payments is proposed. This model aids in minimizing the total inventory cost by finding an optimal replenishment policy. In this model shortages are allowed and partially backlogged. The backlogging rate is variable and dependent on the waiting time for the next replenishment. Some useful theorems have been framed to characterize the optimal solutions. The necessary and sufficient conditions of the existence and uniqueness of the optimal solutions are also provided. An algorithm is designed to find the optimal replenishment cycle time and order quantity under various circumstances. Numerical examples are given to demonstrate the theoretical results. Sensitivity analysis of the optimal solution with respect to major parameters of the system has been carried out and the implications are discussed in detail. In the discussions, suggestions are given to minimize the total cost of the inventory system.     

An inventory model for increasing demand under two levels of trade credit linked to order quantity

During the growth stage of a product life cycle especially for high-tech products, the demand function increases with time. In this paper, we extend the constant demand to a linear non-decreasing demand function of time and incorporate a permissible delay in payment under two levels of trade credit into the model. The supplier offers a permissible delay linked to order quantity, and the retailer also provides a downstream trade credit period to its customers. The objective is to find the optimal replenishment cycle that minimizes the retailer’s annual total relevant cost per unit time. The condition for an optimal solution to the generalized model is presented and some fundamental theoretical results are established. Finally, numerical examples to illustrate the proposed model are provided. Sensitivity analysis is performed and some relevant managerial insights are obtained.     

The EOQ model with defective items and partially permissible delay in payments linked to order quantity derived analytically in the supply chain management

A lot of researchers develop their inventory models under trade credit by assuming that the supplier offers the retailer fully permissible delay in payments and the products received are all non-defective. However, from the viewpoint of practice, it can often be found that the supplier offers the retailer a fully permissible delay in payments only when the order quantity is greater than or equal to the specific quantity. Furthermore, the products received usually contain some defective items. This paper establishes the EOQ model with defective items and partially permissible delay in payments linked to order quantity. It also uses the rigorous method of mathematics to derive the solution procedure to locate the optimal solution. Finally, numerical examples are given to illustrate all theoretical results in this paper.     

Seller’s optimal credit period and cycle time in a supply chain for deteriorating items with maximum lifetime

Due to evaporation, obsolescence, spoilage, etc., some products (e.g., fruits, vegetables, pharmaceuticals, volatile liquids, and others) not only deteriorate continuously but also have their expiration dates. To attract new buyers and increase sales, a seller frequently offers its buyers a trade credit period to settle the purchase amount. There is no interest charge to a buyer if the purchasing amount is paid within the credit period, and vice versa. On the other hand, granting a credit period from a seller to its buyers increases default risk. In this paper, we propose an economic order quantity model for a seller by incorporating the following relevant facts: (1) deteriorating products not only deteriorate continuously but also have their maximum lifetime, and (2) credit period increases not only demand but also default risk. We then characterize the seller’s optimal credit period and cycle time. Furthermore, we discuss a special case for non-deteriorating items. Finally, we run several numerical examples to illustrate the problem and provide some managerial insights.     

A comprehensive extension of optimal ordering policy for stock-dependent demand under progressive payment scheme

In a recent paper, Soni and Shah (2008) presented an inventory model with a stock-dependent demand under progressive payment scheme, assuming zero ending-inventory and adopting a cost-minimization objective. However, with a stock-dependent demand a non-zero ending stock may increase profits resulting from the increased demand. This work is motivated by Soni and Shah’s (2008) paper extending their model to allow for: (1) a non-zero ending-inventory, (2) a profit-maximization objective, (3) a limited inventory capacity and (4) deteriorating items with a constant deterioration rate. For the resulted model sufficient conditions for the existence and uniqueness of the optimal solution are provided. Finally, several economic interpretations of the theoretical results are also given.