Packed capillary columns for liquid chromatography

Summary Fused silica capillaries, ≈ 130 × 0.32mm have been packed with small reversed phase spherical silica particles, 3 or 2μm, in order to achieve LC-systems giving high plate numbers at relatively low pressure drop in short analysis times. At optimal conditions, columns packed with 3μm particles showed reduced plate heights, h, around 2.5, and the column flow resistance, ϕ, was 335–625. With 2μm particles, a reduced plate height of only 3.7 was achieved, which reflects the difficulty in the packing of such small particles.     

Polymethacrylate monolithic columns for capillary liquid chromatography

In recent years, continuous separation media have attracted considerable attention because of the advantages they offer over packed columns. This research resulted in two useful monolithic material types, the first based on modified silica gel and the second on organic polymers. This work attempts to review advances in the development, characterization, and applications of monolithic columns based on synthetic polymers in capillary chromatography, with the main focus on monolithic beds prepared from methacrylate-ester based monomers. The polymerization conditions used in the production of polymethacrylate monolithic capillary columns are surveyed, with attention being paid to the concentrations of monomers, porogen solvents, and polymerization initiators as the system variables used to control the porous and hydrodynamic properties of the monolithic media. The simplicity of their preparation as well as the possibilities of controlling of their porous properties and surface chemistries are the main benefits of the polymer monolithic capillary columns in comparison to capillary columns packed with particulate materials. The application areas considered in this review concern mainly separations in reversed-phase chromatography, ion-exchange chromatography, hydrophobic and hydrophilic interaction modes; enzyme immobilization and sample preparation in the capillary chromatography format are also addressed.     

Reproducible preparative liquid chromatography columns

The level of reproducibility for sets of preparative liquid chromatography (prep-LC) columns was studied using a self-packing axial compression system. Standard deviations of less than 5% of the mean of the column efficiency and less than 2% of the mean of the retention time are reported for three sets of packed, prep-LC columns.     

Polymeric cation-exchange monolithic columns containing phosphoric acid functional groups for capillary liquid chromatography of peptides and proteins

Two different monoliths, both containing phosphoric acid functional groups and polyethylene glycol (PEG) functionalities were synthesized for cation-exchange chromatography of peptides and proteins. Phosphoric acid 2-hydroxyethyl methacrylate (PAHEMA) and bis[2-(methacryloyloxy)ethyl] phosphate (BMEP) were reacted with polyethylene glycol diacrylate (PEGDA) and polyethylene glycol acrylate (PEGA), respectively, in 75-μm i.d. UV-transparent fused-silica capillaries by photo-initiated polymerization. The hydrophobicities of the monoliths were evaluated using propyl paraben under reversed-phase conditions and synthetic peptides under ion-exchange conditions. The resulting monoliths exhibited lower hydrophobicities than strong cation-exchange monoliths previously reported using PEGDA as cross-linker. Dynamic binding capacities of 31.2 and 269 mg/mL were measured for the PAHEMA–PEGDA and BMEP–PEGA monoliths, respectively. Synthetic peptides were eluted from both monoliths in 15 min without addition of acetonitrile to the mobile phase. Peak capacities of 50 and 31 were measured for peptides and proteins, respectively, using a PAHEMA–PEGDA monolith. The BMEP–PEGA monolith showed negligible hydrophobicity. A peak capacity of 31 was measured for the BMEP–PEGA monolith when a 20-min salt gradient rate was used to separate proteins. The effects of functional group concentration, mobile phase pH, salt gradient rate, and hydrophobicity on the retention of analytes were investigated. Good run-to-run [relative standard deviation (RSD) < 1.99%] and column-to-column (RSD < 5.64) reproducibilities were achieved. The performance of the monoliths in ion-exchange separation of peptides and proteins was superior to other polymeric monolithic columns reported previously when organic solvents were not added to the mobile phase.     

Simulated moving columns technique for chiral liquid chromatography

Enantioselectivity of chiral selectors is often relatively low in chiral HPLC. For difficult chiral separations, often only partial resolution is obtained rather quickly by column and mobile phase screening, and, by trial-and-error, additional method optimization is required to achieve complete resolution. This paper describes the development of a novel column-switching technique called "simulated moving columns" (SMC) to quickly achieve complete chiral resolution on columns with limited enantioselectivity. The simulated moving columns (SMC) technique uses two (2) or three (3) short chiral HPLC columns connected in series, and forces the unresolved enantiomers to recycle exclusively through the columns until sufficient resolution is attained. In effect, SMC helps to achieve chiral resolution by virtually multiplying the column length, thus enhancing separation efficiency and resolution, without increasing backpressure. Comparison of the standard non-SMC approach with SMC, and selected applications of chiral separations of pharmaceutical drug molecules are presented. Through measurement and calculation, evaluation of off-column band broadening resulting from a two-column SMC system is provided. The results clearly indicate that SMC eliminates the significant band broadening that is inevitable in the closed-loop recycling techniques currently used in preparative chromatography. Furthermore, SMC is not only useful to enhance resolution for analytical and preparative chiral separation, but also has great potential to enhance recovery and purity for difficult chiral preparative chromatography.     

Monolithic columns in high-performance liquid chromatography

Monolithic media have been used for various niche applications in gas or liquid chromatography for a long time. Only recently did they acquire a major importance in high-performance column liquid chromatography (HPLC). The advent of monolithic silica standard- and narrow-bore columns and of several families of polymer-based monolithic columns has considerably changed the HPLC field, particularly in the area of narrow-bore columns. The origin of the concept, the differences between their characteristics and those of traditional packed columns, their advantages and drawbacks, the methods of preparation of monoliths of different forms, and the current status of the field are reviewed. The actual and potential performance of monolithic columns are compared with those of packed columns. Monolithic columns have considerable advantages, which makes them most useful in many applications of liquid chromatography. They are extremely permeable and offer a high efficiency that decreases slowly with increasing flow velocity.     

Preparation of monolithic silica columns for high-performance liquid chromatography

Preparation methods of monolithic silica columns for HPLC including the surface modification were reviewed. Chemical modification methods recently reported to obtain stationary phases for reversed-phase (RP), chiral, ion-exchange, and hydrophilic interaction chromatography (HILIC) separations were discussed. Recent results related to preparation methods of monolithic silica were also covered. The characteristics and properties of silica monoliths and some applications of monolithic silica columns for different analytical and bioanalytical fields will be commented.     

A simple terminator for high efficiency liquid chromatography columns

A comparison is made between a flat bottom column terminator and a cone terminator on. 1.27 cm O.D. and 2.54 cm O.D. columns. The cone terminator results in a doubling of the column efficiency, is simple and inexpensive, and is universally adaptable to any diameter column.     

Monolithic silica rod columns for high-efficiency reversed-phase liquid chromatography

Chromatographic properties of a new type of monolithic silica rod columns were examined. Silica rod columns employed for the study were prepared from tetramethoxysilane, modified with octadecylsilyl moieties, and encased in a stainless-steel protective column with two polymer layers between the silica and the stainless-steel tubing. A 25 cm column provided up to 45,000 theoretical plates for aromatic hydrocarbons, or a minimum plate height of about 5.5 μm, at optimum linear velocity of ca. 2.3 mm/s and back pressure of 7.5 MPa in an acetonitrile-water (80/20, v/v) mobile phase at 40°C. The permeability of the column was similar to that of a column packed with 5 μm particles, with K(F) about 2.4×10(-14) m(2) (based on the superficial linear velocity of the mobile phase), while the plate height value equivalent to that of a column packed with 2.5 μm particles. Generation of 80,000-120,000 theoretical plates was feasible with back pressure below 30 MPa by employing two or three 25 cm columns connected in series. The use of the long columns enabled facile generation of large numbers of theoretical plates in comparison with conventional monolithic silica columns or particulate columns. Kinetic plot analysis indicates that the monolithic columns operated at 30 MPa can provide faster separations than a column packed with totally porous 3-μm particles operated at 40 MPa in a range where the number of theoretical plates (N) is greater than 50,000.     

The dry-packing of columns in liquid chromatography

This contribution comprises two parts, the one covering some variables in the dry-packing of columns for liquid chromatography, the other the use of an automatic dry-packer in liquid chromatography. A high-pressure stainless steel column was dry-packed using a 20-44 μm size, irrregularly shaped, silica gel support. It was found that, when support was added in discrete amounts, lateral tapping produced a column of higher efficiency (HETP = 0.69 mm) than was the case for vertical tapping (HETP = 1.37 mm). Simultaneous vertical and lateral tapping produced an intermediate result. Bulk filling of the column followed by tapping was inferior to adding support in discrete amounts. An apparatus constructed to perform the vertical and lateral tapping operations automatically confirmed the above conclusions. It was concluded that commercially available dry-packing apparatus do not offer the best action for packing an efficient column since they involve predominantly vertical tapping.     

Microbore columns in quantitative column liquid chromatography

Summary Some quantitative implications of the use of microbore columns in column liquid chromatography are investigated. Although for several pumps the flow rate stability at 50 l min^–1 is slightly worse than that of pumps operating at 1 ml min^–1, the quantitative performance with respect to repeatability and reproducibility of response factors equals that of conventional liquid chromatography. Thermostatting is strongly recommended for microbore column operation.     

Capillary columns in liquid chromatography: between conventional columns and microchips

Liquid chromatography on columns with small internal diameters has been reviewed as the intermediate technique between conventional liquid chromatography and microchip separations. The development of micro column separations in the early years has been described, starting with the papers of Horváth and co-workers and Ishii and co-workers, continuing into the first part of the eighties, then making a leap in time to recent innovations with small-bore columns. Based on internal diameters a classification of the different analytical HPLC columns has been suggested. The advantages of small-bore columns have been discussed, with particular emphasis on the advantage of coupling to concentration sensitive detectors when the sample amount is limited. Open tubular columns are treated as a part of the historic background. The recent developments include a brief look into the current status of monolithic columns, the use of packed nano columns and micro columns with electrospray mass spectrometry, and the potential of two-dimensional comprehensive liquid chromatography. Finally, the coupling of sample preparation to analytical columns and the future applications of the novel technological improvements to the microchip separation methods have been discussed.     

Standardization of test conditions for high performance liquid chromatography columns

Summary Comparisons of columns, column packings and column packing methods are made difficult and sometimes invalidated by differences and inadequacies in the test procedures used and the experimental data recorded. This paper reviews test procedures and recommends standards for a) the experimental and test parameters which must be recorded in order to enable comparisons to be made from laboratory to laboratory, b) the group of chromatographic parameters which best represent column performance for comparative purposes, with methods for their calculation, c) test solutes and eluents for some different types of packing materials. A computer program in BASIC is given which converts the experimental parameters into relevant chromatographic parameters.     

Divinylbenzene-based monolithic capillary columns in capillary liquid chromatography

The effect of the conditions of synthesis of divinylbenzene-based monolithic capillary columns on their chromatographic characteristics was studied. It was demonstrated that the porosity and permeability of the column change significantly even at small deviations from the optimum conditions of polymerization of the monolith in the column. By contrast, the minimum value of HETP proved to be only slightly sensitive to the conditions of synthesis, ranging within ～10–20 μm. The conditions of polymerization of the monolith were found to produce more pronounced effect on the slope of the right branch of the van Deemter curve (parameter C), with the flattest curve being observed for columns prepared under optimum conditions. The minimum value of HETP for polymer monolithic capillary columns was found to be similar to that for silica gel monolithic capillary columns, but the latter are characterized by C values approximately an order of magnitude lower.