聚丁基噻吩的合成及性能

用化学聚合方法合成了聚丁基噻吩导电材料,并研究了不同的聚合条件对聚合物性能的影响。聚丁基噻吩导电材料具有较好的稳定性和加工性,其掺杂态的导电率可达到10s/cm。     

聚噻吩的光电化学研究

导电聚合物是由一些具有共轭π键的聚合物经化学或电化学掺杂后形成的导电率可从绝缘体延伸到导体范围的一类高分子材料。其中噻吩及其衍生物具有导电率高、环境稳定性好、成膜性好、禁带宽度小等特点,是用做光伏电池的理想材料。相继报道的有聚3-甲噻吩[1]、聚3-己基噻吩[2],聚(3-十一烷基-2,2’-并噻吩)[3]等。对于聚噻吩的光电化学性质的研究,在国际上很少见报道,国内尚未见报道,本文对聚噻吩(PTh)的光电化学性质进行了研究。1实验部分1.1仪器与试剂光电化学实验采用带石英窗口的三电极电解池,工作电极为ITO/PTh膜电极,参比电极为饱和…     

烷基取代聚噻吩的化学合成与光电性能研究进展

概述了烷基取代聚噻吩的三种合成方法,即Fe(Ⅲ)催化剂合成法、Ni(O)催化剂合成法和Cu／PdCl2催化剂合成法。介绍了烷基取代聚噻吩稀溶液和薄膜的光吸收、光发射性能,薄膜的热致变色性能及以这些材料为发光活性物质制作的发光二极管的发光性能,展望了烷基取代聚噻吩衍生物的合成与应用前景。     

聚(3-烷基噻吩)的合成与应用研究进展

详述了聚(3-烷基噻吩)的化学合成方法、电化学合成方法及近期新兴的微波辐射辅助合成法;并总结了聚(3-烷基噻吩)在光伏电池材料、电致发光材料和热电材料等领域的应用研究及现状.     

聚（3，4-二氯）噻吩的制备及表征

以四氯噻吩为原料,采用化学合成法制备了聚（3,4-二氯）噻吩．对影响合成材料结构规整度的溶剂极性进行了初步探讨,并采用元素分析、红外光谱、^13C NMR核磁谱等对目标产物进行了表征．结果表明,当采用极性较低的乙二醇二甲醚作溶剂时,可得到规整度较高的目标产物．     

聚(3-烷基噻吩)合成方法研究

作为导电共轭聚合物中的一个典型代表,聚(3-烷基噻吩)(poly(3-alkylthiophene),P3AT)因其良好的光电性能,已广泛应用于有机光电子领域,如有机场效应晶体管、有机发光二极管和有机聚合物太阳能电池等。P3AT的合成制备方法也成为导电共轭聚合物合成方法的方向标,其发展的历史进程代表了共轭聚合物合成方法的共同历程。本文简要介绍了P3AT的发展历史、分子构效关系及其在有机光电器件上的应用,并按合成方法的不同分类,详细介绍了P3AT的各类合成方法,包括:McCullough法、Rieke法、格氏置换合成法、Suzuki反应、Still反应、C-H活化直接偶联等,总结比较了各种方法的反应机理及其优缺点,以期为读者展示出导电共轭聚合物合成方法发展变化的整体过程,并对其发展方向提出了展望。     

聚3-甲基噻吩的光电化学研究

利用光电化学方法研究了聚3-甲基噻吩的光电化学性质.其禁带宽度为1.93 eV.同时确定了它的价带、导带位置.研究还发现聚3-甲基噻吩属于直接跃迁半导体,具有很好的光电流稳定性.得到的最高IPCE值近1.0%.     

低分子量聚噻吩结晶结构研究

用Ruland方法计算了氯仿可溶级分低分子量聚噻吩(PT_1)热处理前后的结晶度。热处理后结晶度及微晶尺寸均有明显提高。测量及计算晶胞参数证明,PT_1在晶态下具有近似平面伸展构象,提出了初步的结构模型。热处理前后的PT_1给出了明确可归属的红外吸收谱带。     

聚丁基噻吩的电化学合成及性能研究

丁基噻吩在硝基苯溶液中以六氟磷酸四丁基季铵盐为支持电解质，在恒电流条件下进行电化学氧化聚合，通过电导率的测量及可见──紫外光谱分析，讨论了单体浓度、电解质浓度、电流密度、聚合温度对聚合物膜的导电性能的影响。扫描电镜图表明，随着聚合的进行．膜的表面呈“菜花”状结构。循环伏安图表明聚了基噻吩与聚噻吩具有相近的氧化峰位。     

Synthesis and characterization of new copolymers of thiophene and vinylene: Poly(thienylenevinylene)s and poly(terthienylenevinylene)s with thioether side chains

Poly[3,4-bis(3-methylbutylthio)thienylenevinylene], poly[3,4-bis-(S)-(2-methylbutylthio)thienylenevinylene], poly[3′,4′-bis(3-methylbutylthio)-2,2′:5′,2″-terthienylene-5,5″-vinylene], and poly{3′,4′-bis-(S)-[2-methylbutylthio]-2,2′:5′,2″-terthienylene-5,5″-vinylene} have been synthesized. The synthesis starts from the thiophene monomers and trimers, which are formylated to give the corresponding dialdehydes. The dialdehydes are reductively polymerized using a McMurry coupling. The polymers are characterized by GPC, optical spectroscopy (FT-IR, UV-vis, circular dichroism spectroscopy and photoluminescence) and by proton and carbon NMR spectroscopy. The polymers are soluble in common organic solvents, such as THF, chloroform, toluene, benzene and 1,2-dichlorobenzene. The solvatochromism and thermochromism of the polymers in solution are investigated, while the optical activity of the polymers is used to investigate the supramolecular aggregation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4629–4639, 1999     

Poly(terthiophene)s from copolymer precursors via solid‐state oxidative conversion

Herein, we report the synthesis of conducting poly (terthiophene)s using a side chain precursor polymer approach. Random copolymers were prepared by ring opening metathesis polymerization of two norbornylene monomers, one containing a pendant terthiophene group and the other containing a pendant acetate group. Solid‐state oxidative conversion of the terthiophene units was used to produce conductive polymers. Oxidative solid‐state conversion was successful for copolymers containing as little as 1 mol % of terthiophene comonomer. The electrical and optical properties of CPs were studied as a function of the amount of electroactive moiety, terthiophene (3T), present in the copolymer. The CPs were found to have conductivity varying between 10^?1 and 10^?4 S/cm depending on the precursor copolymer compositions. The CPs obtained from all precursors had no significant difference in their energy gaps and showed blue to orange color transitions when switching from the oxidized to the neutral states, respectively. The absorbance intensity at 426 nm for poly(3T) from the precursors fits the Beer–Lambert law corresponding to the range of initial 3T content in the precursor copolymer composition (from 1 to 100 mol %). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 756–763, 2010     

New Poly(arylene ethynylene)s Consisting of Electron‐Deficient Aryleneimide Units

Summary: A new class of poly(arylene ethynylene)s (PAEs) containing an electron‐deficient N‐alkylphthalimide unit was prepared by means of a Sonogashira reaction. Complete solubility of the PAEs was observed by utilizing a 2,6‐diisopropylphenyl side chain. The chemical structure of the novel soluble polymer 3c was confirmed by NMR spectra, whereas the insoluble polymers were characterized by elemental analysis and IR spectra. Fluorescence measurements of 3c indicate a rigid structure and high symmetry in the excited state.

     

Syntheses of new poly (arylene vinylene) analogues: Poly (4,7-benzofuran vinylene) and poly (4,7-benzothiophene vinylene)

The reaction of bis(4,7-tetrahydrothiopheniomethyl) benzofuran dibromide with aqueous tetramethylammonium hydroxide leads to a water-soluble polyelectrolyte which can be film cast and thermolytically eliminated to give poly(4,7-benzofuran vinylene) (PBFV). Subjection of bis(4,7-tetrahydrothiopheniomethyl) benzothiophene dibromide to the same reaction sequence gives poly(4,7-benzothiophene vinylene) (PBTV). UV-VIS studies show that PBFV has a band gap of 2.76 eV, while PBTV has a band gap of 2.92 eV. These polymers are members of a new class of conjugated poly (arylene vinylene)s, in which heterocyclic pseudoaromatic rings are fused onto a poly(1,4-phenylene vinylene) backbone. © 1994 John Wiley & Sons, Inc.     

Regioregular poly[3‐(4‐alkoxyphenyl)thiophene]s

An easy synthetic procedure for soluble poly[3‐(4‐alcoxyphenyl)thiophene]s is reported. The polymers present a high regioregularity degree as determined by both UV–vis spectra and ¹H and ¹³C NMR analysis. Furthermore, X‐ray powder diffraction analysis performed on films of the polymers suggests a π‐stacked packing structure of the macromolecules. Electrical characterization was performed on one of the synthesized polythiophenes on both undoped and doped (with FeCl₃ or iodine) films. The conductivity and charge‐carrier mobility were assessed by current–voltage and field effect measurements. Well‐structured polymer films were obtained simply via spin coating from chloroform solutions and without the need of further processing, unlike other regioregular polythiophenes reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1758–1770, 2007     

Poly(phosphoester)s: A New Platform for Degradable Polymers

Poly(phosphoester)s (PPEs) play an important role in nature. They structure and determine life in the form of deoxy‐ and ribonucleic acid (DNA and RNA), and, as pyrophosphates, they store up chemical energy in organisms. Polymer chemistry, however, is dominated by the nondegradable polyolefins and degradable poly(carboxylic ester)s (PCEs) that are produced on a large scale today. Recent studies have illustrated the potential of PPEs for future applications beyond flame retardancy, and provided a coherent vision to implement this classic biopolymer in modern applications that demand biocompatibility and degradability as well as the possibility to adjust the properties to individual needs.     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006     

Comparative reactivity of thiophene and 3,4-(ethylenedioxy)thiophene as terminal electropolymerizable units in bis-heterocycle arylenes

The monomers bis(2-thienyl)-9,9-didecylfluorene, BTDF, and bis(3,4-(ethylenedioxy)thien-2-yl)-9,9-didecylfluorene, BEDOT-DF, have been synthesized and electropolymerized to the corresponding conducting polymers. The potential for the electropolymerization of BTDF was found to be dependent on the solvent composition. In CH₂Cl₂, polymer film deposition is achieved only at potentials higher than 1.3 V vs. Ag/Ag⁺, while in a 30/70 mixture of CH₂Cl₂/CH₃CN the polymerization is efficient at 0.9 V. BEDOT-DF polymerizes at significantly lower potentials and more rapidly than BTDF. The electron-donating alkoxy substituents of the EDOT units lead to stabilization of the cation radical intermediates allowing the electropolymerization to proceed at 0.55 V. The neutral polymers are insoluble in common organic solvents and are stable to 300°C under nitrogen. Upon oxidation, both polymers show two intragap transitions at intermediate doping levels due to the formation of bipolaronic states and the oxidized polymers exhibit conductivities up to 10⁻⁴ S/cm. The redox-stimulated ion transport characteristics, studied by the electrochemical quartz crystal microbalance (EQCM) indicates that the electrolyte anions are the dominant mobile species. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3627–3636, 1997