Use of poly(ester-sulfonic acid) film-coated electrodes as amperometric detectors in flow injection analysis

Within the past several years significant advances have been made towards the development and incorporation of chemically modified electrodes as selective detectors for high performance liquid chromatography and flow injection analysis. In many cases the chemically modified electrode systems closely approach the “ideal” detector specifications of chemical and mechanical stability along with a significant linear response region. This paper will discuss the characterization and incorporation of ionomeric poly(ester-sulfonic acid) coated electrodes as nonaqueous electrochemical detectors. The orientation of the electrodes in the detector system as well as the increased sensitivity levels to 10⁻¹⁰ g ml⁻¹ for cationic species and 10⁻⁹ g ml⁻¹ for neutral species will be presented. Also the applicability of the ionomer coated electrodes as nonelectrolyte detectors achieved a reproducible response with detection limits to 10⁻⁶ g ml⁻¹. Overall this system performed as well as, or better than, more specialized and expensive thin layer electrochemical detectors.     

Evaluation of electrodes coated with metal hexacyanoferrate as amperometric sensors for nonelectroactive cations in flow systems

Two electrodes modified with either nickel or cupric hexacyanoferrate films were evaluated and compared as sensors for nonelectroactive cations in a flow-injection system. Both gave responses for group 1A and ammonium ions, but only the electrode modified with cupric hexacyanoferrate was sufficiently stable for use in flowing solutions. This electrode responded to K⁺, NH, Rb⁺, and Cs⁺ ions rather selectively. Within this group, the selectivity could be controlled from general to almost specific toward Cs⁺ by the potential at which the electrode was poised. The electrode was compatible with a mobile phase of dilute nitric acid commonly used in ion chromatography, and chromatographic detection limits of 2 × 10⁻⁷ M and linear responses over two decades were obtained. The electrode was applied to the ion chromatographic analysis of K⁺ and NH in urine and K⁺ in blood serum samples.     

Electrochemical study and flow injection analysis of paracetamol in pharmaceutical formulations based on screen-printed electrodes and carbon nanotubes

Acetaminophenol or paracetamol is one of the most commonly used analgesics in pharmaceutical formulations. Acetaminophen is electroactive and voltammetric mechanistic studies for the electrode processes of the acetaminophenol/N-acetyl-p-quinoneimine redox system are presented. Carbon nanotubes modified screen-printed electrodes with enhanced electron transfer properties are used for the study of the electrochemical-chemical oxidation mechanism of paracetamol at pH 2.0.Quantitative analysis of paracetamol by using its oxidation process (in a Britton-Robinson buffer solution pH 10.0) at +0.20 V (vs. an Ag pseudoreference electrode) on an untreated screen-printed carbon electrode (SPCE) was carried out. Thus, a cyclic voltammetric based reproducible determination of acetaminophen (R.S.D., 2.2%) in the range 2.5 × 10⁻⁶ M to 1 × 10⁻³ M, was obtained. However, when SPCEs are used as amperometric detectors coupled to a flow injection analysis (FIA) system, the detection limit achieved for paracetamol was 1 × 10⁻⁷ M, one order of magnitude lower than that obtained by voltammetric analysis. The repeatability of the amperometric detection with the same SPCE is 2% for 15 successive injections of 10⁻⁵ M acetaminophen and do not present any memory effect.Finally, the applicability of using screen-printed carbon electrodes for the electrochemical detection of paracetamol (i.e. for quality control analysis) was demonstrated by using two commercial pharmaceutical products.     

Manufacture and evaluation of carbon nanotube modified screen-printed electrodes as electrochemical tools

Carboxylated multiwalled carbon nanotubes (MWCNT-COOH) dissolved in a mixture of DMF:water were used to modify the surfaces of commercially available screen-printed electrodes (SPEs). The morphology of the MWCNT-COOH and the modified SPEs was characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), respectively. SEM analysis showed a porous structure formed by a film of disordered nanotubes on the surface of the working electrode.The modification procedure with MWCNT-COOH was optimised and it was applied to unify the electrochemical behaviour of different gold and carbon SPEs by using p-aminophenol as the benchmark redox system. The analytical advantages of the MWCNT-COOH-modified SPEs as voltammetric and amperometric detectors as well as their catalytic properties were discussed through the analysis, for instance, of dopamine and hydrogen peroxide. Experimental results show that the electrochemical active area of the nanotube-modified electrode increased around 50%. The repeatability of the modification methodology is around 6% (R.S.D.) and the stability of MWCNT-COOH-modified SPEs is ensured for, at least, 2 months.     

Flow amperometric detection of indigo for enzyme-linked immunosorbent assays with use of screen-printed electrodes

A simple and automated methodology for a sensitive electrochemical detection of enzyme immunoassays that employ alkaline phosphatase (AP) as label has been developed. A flow injection system with programmable pump, valve and cell functions, amperometric detection of indigo and screen-printed electrodes (SPEs) are responsible for the advantages of this methodology. Amperometric detection at a low potential of indigo, the product of the enzymatic hydrolysis of the substrate 3-indoxyl phosphate (IP), is combined with a flow injection system. This incorporates in the flow cell a disposable screen-printed board provided with a graphite working electrode. No electrode pretreatment is necessary to obtain reproducible signals. The system was applied to the determination by an enzyme-linked immunosorbent assays (ELISA) of pneumolysin (PLY), a toxin related to respiratory infections. Linear calibration curves for low and high concentration ranges were obtained. These were also performed in a proteic matrix and linearity was also obtained.     

Catalytic electrooxidation of NADH for dehydrogenase amperometric biosensors

The developments in the techniques of NADH catalytic oxidation relevant for incorporation in amperometric biosensors with dehydrogenase enzymes are reviewed with special emphasis in the years following 1990. The review stresses the direct electro-catalytic methods of NAD⁺ recycling as opposed to enzymatic regeneration of the coenzyme. These developments are viewed and evaluated from a mechanistic perspective of recycling of NADH to enzymatically active NAD⁺, and from the point of view of development of technologically useful reagentless dehydrogenase biosensors. An effort is made to propose a method for the standardization of evaluation of new mediating and direct coenzyme recycling schemes. A perspective is given for the requirements that have to be met for successful biosensor development incorporating dehydrogenase enzymes that open the analytical possibilities to a number of new analytes. The intrinsic limitations of the system are finally discussed and a view of the future of the field is presented.     

Determination of available phosphorus in soils by using a new extraction procedure and a flow injection amperometric system

A new extraction procedure based on an off-line extraction column was proposed for extracting of available phosphorus from soils. The column was fabricated from a plastic syringe fitted at the bottom with a cotton wool and a piece of filter paper to support a soil sample. An aliquot (50 mL) of extracting solution (0.05 M HCl + 0.0125 M H₂SO₄) was used to extract the sample under gravity flow and the eluate was collected in a polyethylene bottle. The extract was then analyzed for phosphorus contents by a simple flow injection amperometric system, employing a set of three-way solenoid valves as an injection valve. The method is based on the electrochemical reduction of 12-molybdophosphate which is produced on-line by the reaction of orthophosphate with acidic molybdate and the electrical current produced was directly proportional to the concentration of phosphate in range of 0.1-10.0 mg L⁻¹ PO₄-P, with a detection limit of 0.02 mg L⁻¹. Relative standard for 11 replicate injections of 5 mg L⁻¹ PO₄-P was 0.5%. A sample through put of 35 h⁻¹ was achieved, with consumption of 14 mg KCl, 10 mg ammonium molybdate and 0.05 mL H₂SO₄ per analysis. The detection system does not suffer from the interferences that are encountered in the photometric method such as colored substances, colloids, metal ions, silicate and refractive index effect (Schlieren effect). The results obtained by the column extraction procedure were well correlated with those obtained by the steady-state extraction procedure, but showed slightly higher extraction efficiency.     

Evaluation of redox mediators for amperometric biosensors: Ru-complex modified carbon-paste/enzyme electrodes

The properties of reagentless amperometric biosensors are mainly governed by the interaction of the used redox enzyme and the redox mediators used to facilitate the electron-transfer reaction. Both the used redox mediators and the redox enzymes differ concerning their hydrophilicity and their properties within the matrix of a carbon-paste electrode. Since there is no general procedure which is applicable for any enzyme in combination with any redox mediator, optimisation is necessary for each possible combination. Three approaches for the development of biosensors were investigated using carbon-paste electrodes enriched with redox mediator as a base in all sensor architectures. A class of redox mediators with the common formula Ru(LL)(2)(X)(2) (where LL are 1,10-phenantroline or 2,2'-bipyridine type ligands, and X is an acido ligand) was investigated. In the first approach, enzymes were integrated into the carbon paste; in the second, the enzymes were adsorbed on the surface of the mediator-containing carbon-paste electrode and held in place by a Nafion film; and in the third approach, enzymes were entrapped in polymer films, which were electrochemically deposited onto the electrode's surface. The properties of the obtained biosensors strongly depend on the sensor architecture and the specific features of the used enzyme. Thus, our investigation using three different sensor architectures can provide valuable information about the possible interaction between a specific enzyme and a redox mediators with specific properties.     

A renewable copper electrode as an amperometric flow detector for nitrate determination in mineral water and soft drink samples

A novel approach was developed for nitrate analysis in a FIA configuration with amperometric detection (E = −0.48 V). Sensitive and reproducible current measurements were achieved by using a copper electrode activated with a controlled potential protocol. The response of the FIA amperometric method was linear over the range from 0.1 to 2.5 mmol L⁻¹ nitrate with a detection limit of 4.2 μmol L⁻¹ (S/N = 3). The repeatability of measurements was determined as 4.7% (n = 9) at the best conditions (flow rate: 3.0 mL min⁻¹, sample volume: 150 μL and nitrate concentration: 0.5 mmol L⁻¹) with a sampling rate of 60 samples h⁻¹. The method was employed for the determination of nitrate in mineral water and soft drink samples and the results were in agreement with those obtained by using a recommended procedure. Studies towards a selective monitoring of nitrite were also performed in samples containing nitrate by carrying out measurements at a less negative potential (−0.20 V).     

Application of amperometric sol-gel biosensor to flow injection determination of glucose

A glucose biosensor with enzyme immobilised by sol–gel technology was constructed and evaluated. The glucose biosensor reported is based on encapsulated GOX within a sol–gel glass, prepared with 3-aminopropyltriethoxy silane, 2-(3,4-epoxycyclohexyl)-ethyltrimetoxy silane and HCl. A flow system incorporating the amperometric biosensor constructed was developed for the determination of glucose in the 1×10⁻⁴–5×10⁻³ mol l⁻¹ range with a precision of 1.5%. The results obtained for the analysis of electrolytic solution for iv administration and human serum samples showed good agreement between the proposed method and the reference procedure, with relative error <5%.     

Ultra-simple adaptor to convert batch cells with mercury drop electrodes in voltammetric detectors for flow analysis

A simple, robust and fast-responding flow adaptor for mercury drop electrodes (MDEs) is described. An L-shaped PTFE tube with an internal diameter of 0.5 mm is fixed with a silicone ring on the glass capillary of a MDE, in such a way as to direct the outcoming flow onto the mercury drop, from a distance of about 0.5 mm. Any commercial or laboratory-made batch cell, provided with an MDE, serves for the purpose. The level of supporting electrolyte in the cell is maintained constant through a siphon or a lateral draining orifice. The adaptor is compatible with all the different brands and operating modes of the MDEs (free dropping, controlled drop time, renewable static drop, hanging drop or sessile drop). Flow injection experiments were conducted with the following amperometric detection modes: sampled-DC, reverse pulse amperometry (RPA), and anodic stripping voltammetry (ASV). The FIA-RPA peaks presented a R.S.D.<0.8% for 1.0×10⁻⁵ mol l⁻¹ lead(II) (N=30, V_sample=100 μl). The response time (0-63% of the signal maximum) to a concentration step is 1.2 s for 500 μl injections of 0.1 mmol l⁻¹ ascorbic acid in acetate buffer at a flow rate of 1 ml min⁻¹, which corresponds to a response volume of 20 μl. As an example of practical application, copper(II) was determined in fertilizers by RPA using the standard addition method, at an analytical frequency of 90 injections per h.     

Optimization of a flow injection analysis system for tartaric acid determination in wines

The objective of this work is the development and optimization of a method for tartaric acid analysis in wines that does not require any sample pre-treatment and with adequate accuracy. A flow injection analysis manifold with three channels, using a dialysis unit to eliminate sample matrix interferences and to accomplish on-line dilution, is proposed for the spectrophotometrical determination of tartaric acid in wines making use of its reaction with vanadate. The proposed method is fast, accurate, simple, economic and does not require any sample pre-treatment. Preliminary studies using factorial designs were performed to determine which operational parameters should be included in the optimization stage. The optimization was performed using a modified simplex algorithm with a response function that included sensitivity, deviation from linearity at low concentrations and residence time, used as an inverse measure of sampling rate. The most relevant analytical parameters of the method are presented, including a comparison between the results provided by the proposed method and by an alternative procedure in the analysis of a set of wine samples from Portugal, with tartaric acid values in the range 0.5–4 g l⁻¹.     

Evaluation of dsDNA as a wire for redox-active proteins

The redox-active multiligand-binding flavoprotein dodecin binds flavins with high affinity when they are oxidized, whereas flavin reduction induces the dissociation of the holoprotein complex in apododecin and free flavin ligands. Dodecin could be reconstituted at flavin-terminated dsDNA monolayers. The binding and release of apododecin triggered by the redox state of the flavins can be monitored by surface-sensitive techniques such as surface plasmon resonance and quartz crystal microbalance measurements with dissipation monitoring. It has been shown that flavin reduction followed by the release of apododecin can be achieved by mediated electron transfer in the presence of the redox mediator amino ethyl viologen and by chemical flavin reduction, whereas flavin reduction by direct electron transfer via the dsDNA tethers is not possible. The combination of electrochemistry with surface-sensitive techniques such as surface plasmon resonance or quartz crystal microbalance measurements with dissipation monitoring could be highly beneficial to confirm or disprove the mechanism, which has been postulated for the action of primases, which contain a [4Fe4S] cluster and are involved in DNA replication. It has been postulated that these enzymes bind the DNA template when the cluster is in the [4Fe4S]³⁺ state, whereas they are released when the cluster is reduced via electron transfer through DNA and the protein environment.     

Citrate selective electrodes for the flow injection analysis of soft drinks, beers and pharmaceutical products

Aiming the establishment of simple and accurate readings of citric acid (CA) in complex samples, citrate (CIT) selective electrodes with tubular configuration and polymeric membranes plus a quaternary ammonium ion exchanger were constructed. Several selective membranes were prepared for this purpose, having distinct mediator solvents (with quite different polarities) and, in some cases, p-tert-octylphenol (TOP) as additive. The latter was used regarding a possible increase in selectivity. The general working characteristics of all prepared electrodes were evaluated in a low dispersion flow injection analysis (FIA) manifold by injecting 500 μl of citrate standard solutions into an ionic strength (IS) adjuster carrier (10⁻² mol l⁻¹) flowing at 3 ml min⁻¹. Good potentiometric response, with an average slope and a repeatability of 61.9 mV per decade and ±0.8%, respectively, resulted from selective membranes comprising additive and bis(2-ethylhexyl)sebacate (bEHS) as mediator solvent. The same membranes conducted as well to the best selectivity characteristics, assessed by the separated solutions method and for several chemical species, such as chloride, nitrate, ascorbate, glucose, fructose and sucrose. Pharmaceutical preparations, soft drinks and beers were analyzed under conditions that enabled simultaneous pH and ionic strength adjustment (pH=3.2; ionic strength=10⁻² mol l⁻¹), and the attained results agreed well with the used reference method (relative error<4%). The above experimental conditions promoted a significant increase in sensitivity of the potentiometric response, with a supra-Nernstian slope of 80.2 mV per decade, and allowed the analysis of about 90 samples per hour, with a relative standard deviation <1.0%.     

Highly sensitive and selective amperometric sensors for nanomolar detection of iodate and periodate based on glassy carbon electrode modified with iridium oxide nanoparticles

Iridium oxide nanoparticles are grown on a glassy carbon electrode by electrodepositing method. The electrochemical behavior and electrocatalytic activity of modified electrode towards reduction of iodate and periodate are studied. The reductions of both ions occur at the unusual positive peak potential of 0.7 V vs. reference electrode. The modified electrode is employed successfully for iodate and periodates detection using cyclic voltammetry, hydrodynamic amperometry and flow injection analysis (FIA). In the performed experiments, flow injection amperometric determination of iodate and periodate yielded calibration curves with the following characteristics: linear dynamic range up to 100 and 80 μM, sensitivity of 140.9 and 150.6 nA μM⁻¹ and detection limits of 5 and 36 nM, respectively. The repeatability of the modified electrode for 21 injections of 1.5 μM of iodate solution is 1.5%. The interference effects of NO₂⁻, NO₃⁻, ClO₃⁻, BrO₃⁻, ClO₄⁻, SO₄²⁻, Cu²⁺, Zn²⁺, Mn²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Na⁺, K⁺, NH₄⁺ and K⁺, CH₃COO⁻ and glucose were negligible at the concentration ratio of more than 1000. The obtained attractive analytical performance together with high selectivity and simplicity of the proposed method provide an effective and e novel modified electrode to develop an iodate and periodate sensor. Sensitivity, selectivity, the liner concentration range and the detection limit of the developed sensor are all much better than all known similar sensors in the literature for iodate and periodate determination.     

Study of the voltammetric behaviour of metam and its application to an amperometric flow system

The electrochemical behaviour of the pesticide metam (MT) at a glassy carbon working electrode (GCE) and at a hanging mercury drop electrode (HMDE) was investigated. Different voltammetric techniques, including cyclic voltammetry (CV) and square wave voltammetry (SWV), were used. An anodic peak (independent of pH) at +1.46 V vs AgCl/Ag was observed in MT aqueous solution using the GCE. SWV calibration curves were plotted under optimized conditions (pH 2.5 and frequency 50 Hz), which showed a linear response for 17–29 mg L⁻¹. Electrochemical reduction was also explored, using the HMDE. A well defined cathodic peak was recorded at −0.72 V vs AgCl/Ag, dependent on pH. After optimizing the operating conditions (pH 10.1, frequency 150 Hz, potential deposition −0.20 V for 10 s), calibration curves was measured in the concentration range 2.5×10⁻¹ to 1.0 mg L⁻¹ using SWV. The electrochemical behaviour of this compound facilitated the development of a flow injection analysis (FIA) system with amperometric detection for the quantification of MT in commercial formulations and spiked water samples. An assessment of the optimal FIA conditions indicated that the best analytical results were obtained at a potential of +1.30 V, an injection volume of 207 μL and an overall flow rate of 2.4 ml min⁻¹. Real samples were analysed via calibration curves over the concentration range 1.3×10⁻² to 1.3 mg L⁻¹. Recoveries from the real samples (spiked waters and commercial formulations) were between 97.4 and 105.5%. The precision of the proposed method was evaluated by assessing the relative standard deviation (RSD %) of ten consecutive determinations of one sample (1.0 mg L⁻¹), and the value obtained was 1.5%.     

Cobalt phthalocyanine as a biomimetic catalyst in the amperometric quantification of dipyrone using FIA

A biomimetic sensor for the determination of dipyrone was prepared by modifying carbon paste with cobalt phthalocyanine (CoPc), and used as an amperometric detector in a flow injection analysis (FIA) system. The results of cyclic voltammetry experiments suggested that CoPc behaved as a biomimetic catalyst in the electrocatalytic oxidation of dipyrone, which involved the transfer of one electron. The optimized FIA procedure employed a flow rate of 1.5 mL min⁻¹, a 75 μL sample loop, a 0.1 mol L⁻¹ phosphate buffer carrier solution at pH 7.0 and amperometric detection at a potential of 0.3 V vs. Ag/AgCl. Under these conditions, the proposed method showed a linear response for dipyrone concentrations in the range 5.0 × 10⁻⁶-6.3 × 10⁻³ mol L⁻¹. Selectivity and interference studies were carried out in order to validate the system for use with pharmaceutical and environmental samples. In addition to being environmentally friendly, the proposed method is a sensitive and selective analytical tool for the determination of dipyrone.     

Evaluation of the antioxidant power of honey, propolis and royal jelly by amperometric flow injection analysis

In this paper is described the applicability of a flow injection system, operating with an amperometric detector, for measurement in rapid and simple way the antioxidant power of honey, propolis and royal jelly. The proposed method evaluates the reducing power of selected antioxidant compounds and does not require the use of free radicals or oxidants. Twelve honey, 12 propolis and 4 royal jelly samples of different botanical and geographical origin were evaluated by the electrochemical method and the data were compared with those obtained by the DPPH assay. Since a good correlation was found (R² = 0.92) the proposed electrochemical method can be successfully employed for the direct, rapid and simple monitoring of the antioxidant power of honeybee products. Furthermore, the total phenolic content of samples was determined by the Folin-Ciocalteau procedure and the characteristic antioxidant activities showed a good correlation with phenolics (R² = 0.96 for propolis and 0.90 for honey).     

Construction and performance characterization of ion-selective electrodes for potentiometric determination of phenylpropanolamine hydrochloride applying batch and flow injection analysis techniques

New phenylpropanolamine hydrochloride (PPA.Cl)-selective electrodes of the conventional polymer membrane type, based on incorporation of phenylpropanolamine-tetraphenylborate (PPA-TPB) ion-pair or phenylpropanolamine-phosphotungstate (PPA-PT) ion-associate in a poly(vinyl chloride) (PVC) membrane plasticized with dioctylphethalate (DOP) or dibutylphethalate (DBP), have been constructed. The electrodes were fully characterized in terms of the membrane composition, temperature, and pH. The electrodes were applied to the potentiometric determination of PPA.Cl in pure solutions and in pharmaceutical preparations under batch and flow injection conditions. The sensors showed fast, stable, and Nernstian slope over the concentration ranges 1.0×10⁻⁵ to 8.91×10⁻³ M and 10⁻⁵ to 10⁻² M in the case of PPA-TPB applying batch and flow injection analysis (FIA), respectively, and 5.01×10⁻⁶ to 1.25×10⁻³ M and 10⁻⁵ to 10⁻² M in the case of PPA-PT for batch and FIA systems, respectively. The electrodes exhibited good selectivity for PPA.Cl with respect to a large number of inorganic cations, sugars, amino acids, and components other than phenylpropanolamine of the mixed drugs. The effect of temperature on the electrodes was also studied.     

Chemically modified screen-printed electrodes as efficient potentiometric sensors for cyclobenzaprine hydrochloride determination in pure and pharmaceutical preparations

Chemically modified screen-printed electrodes (SPEs) with 3,4-dihydroxy-9,10-dioxo-2-anthracenesulfonic acid sodium salt [Alizarin Red (ALZ.R)] and tricresylphosphate (TCP) were fabricated and examined for potentiometric determination of cyclobenzaprine hydrochloride (CZP.HCl) in pure and pharmaceutical samples. The content of ALZ.R in the prepared SPEs varied, which significantly affected their potentiometric response during CZP.HCl estimation. The measured potential value was dependent on the pH of the studied solution. A stable modified SPE sensor was prepared with reproducible readings within 22 days. A wide linear concentration range could be measured with Nernestian slope value of 60.12 ± 0.18 mV decade⁻¹. Based on the recorded analytical parameters of these modified SPEs, a sensitive and reliable detection of CZP.HCl in pharmaceutical samples could be attained.