Surfactant-free nanofluids containing double- and single-walled carbon nanotubes functionalized by a wet-mechanochemical reaction

Single-walled carbon nanotubes (SWNTs) and double-walled carbon nanotubes (DWNTs) have been functionalized through the wet-mechanochemical reaction method. Results from the infrared spectrum and zeta potential measurements show that the hydroxyl groups have been introduced onto the treated SWNT and DWNT surfaces. Transmission electron microscope observations revealed that the SWNTs and DWNTs were cut short after being milled. SWNTs and DWNTs with optimized aspect ratio can be obtained by adjusting the ball milling parameters. Thermal conductivity enhancement of water-based nanofluids containing treated carbon nanotubes (CNTs) shows augmentation with the increase of temperature mainly due to the effects of an ordering liquid layer forming around the chemical surfaces of CNTs. Moreover, the thicker interfacial layer of water molecules on the surfaces of CNTs with smaller diameter, such as SWNTs, is in favor of greater thermal conductivity enhancement compared with the thinner one on the surfaces of DWNTs or MWNTs with larger diameter.     

Preferred functionalization of metallic and small-diameter single-walled carbon nanotubes by nucleophilic addition of organolithium and -magnesium compounds followed by reoxidation

Covalent sidewall addition to single-walled nanotubes (SWNTs) of a series of organolithium and organomagnesium compounds (nBuLi, tBuLi, EtLi, nHexLi, nBuMgCl, tBuMgCl) followed by reoxidation is reported. The functionalized R(n)-SWNTs were characterized by Raman and NIR emission spectroscopy. The reaction of SWNTs with organolithium and magnesium compounds exhibits pronounced selectivity: in general, metallic tubes are more reactive than semiconducting ones. The reactivity of SWNTs toward the addition of organometallic compounds is inversely proportional to the diameter of the tubes. This was determined simultaneously and independently for both metallic and semiconducting SWNTs. The reactivity also depends on the steric demands of the addend. Binding of the bulky t-butyl addend is less favorable than addition of primary alkyl groups. Significantly, although tBuLi is less reactive than, for example, nBuLi, it is less selective toward the preferred reaction with metallic tubes. This unexpected behavior is explained by fast electron transfer to the metallic SWNTs having low-lying electronic states close to the Fermi level, a competitive initial process. The NIR emission of weakly functionalized semiconducting SWNTs, also reported for the first time, implies interesting applications of functionalized tubes as novel fluorescent reporter molecules.     

Diameter-dependent, progressive alkylcarboxylation of single-walled carbon nanotubes

We demonstrate diameter-dependent, progressive alkylcarboxylation of single-walled carbon nanotubes by recycling a modified Billups-Birch reaction. The strong diameter dependence was confirmed by Raman spectroscopy. Alkylcarboxylation made SWNTs soluble in water, allowing the more readily functionalized, smaller diameter nanotubes to be enriched by water extraction.     

Synthesis of benzofurans with remote bromide functionality by domino "ring-cleavage-deprotection-cyclization" reactions of 2-alkylidenetetrahydrofurans with boron tribromide

[reaction: see text] Bromination and subsequent Suzuki reactions of 2-alkylidenetetrahydrofurans, readily available by [3+2] cyclizations, afforded 1'-(2'-methoxyphenyl)-2-alkylidenetetrahydrofurans. Treatment of the latter with boron tribromide and subsequent addition of water resulted in the chemoselective formation of functionalized benzofurans containing a remote bromide functionality. The products are formed by a new domino "ring-cleavage-deprotection-cyclization" reaction. The addition of an aqueous solution of potassium tert-butoxide, rather than water, afforded saturated analogues of calycine by a "ring-cleavage-deprotection-ring-closure-lactonization" reaction.     

Rational chemical strategies for carbon nanotube functionalization

Whereas the chemistry of fullerenes is well-established, the chemistry of single-walled carbon nanotubes (SWNTs) is a relatively unexplored field of research. Investigations into the bonding of moieties onto SWNTs are important because they provide fundamental structural insight into how nanoscale interactions occur. Hence, understanding SWNT chemistry becomes critical to rational, predictive manipulation of their properties. Among the strategies discussed include molecular metal complexation with SWNTs to control site-selective chemistry in these systems. In particular, work has been performed with Vaska's and Wilkinson's complexes to create functionalized adducts. Functionalization should offer a relatively simple means of tube solubilization and bundle exfoliation, and also allows for tubes to be utilized as recoverable catalyst supports. Solubilization of oxidized SWNTs has also been achieved through derivatization by using a functionalized organic crown ether. The resultant adduct yielded concentrations of dissolved nanotubes on the order of 1 g L(-1) in water and at elevated concentrations in a range of organic solvents, traditionally poor for SWNT manipulation. To further demonstrate chemical processability of SWNTs, we have subjected them to ozonolysis, followed by treatment with various independent reagents, to rationally generate a higher proportion of oxygenated functional groups on the nanotube surface. This protocol has been found to purify nanotubes. More importantly, the reaction sequence has been found to ozonize the sidewalls of these nanotubes. Finally, SWNTs have also been chemically modified with quantum dots and oxide nanocrystals. A composite heterostructure consisting of nanotubes joined to nanocrystals offers a unique opportunity to obtain desired physical, electronic, and chemical properties by adjusting synthetic conditions to tailor the size and structure of the individual sub-components, with implications for self-assembly.     

Carbon nanotube salts. Arylation of single-wall carbon nanotubes

[reaction: see text] Carbon nanotube salts prepared by treating single-wall carbon nanotubes (SWNTs) with lithium in liquid ammonia react readily with aryl iodides to give SWNTs functionalized by aryl groups.     

Functionalization of single-walled carbon nanotubes with well-defined polystyrene by "click" coupling

Covalent functionalization of alkyne-decorated SWNTs with well-defined, azide-terminated polystyrene polymers was accomplished by the Cu(I)-catalyzed [3 + 2] Huisgen cycloaddition. This reaction was found to be extremely efficient in producing organosoluble polymer-nanotube conjugates, even at relatively low reaction temperatures (60 degrees C) and short reaction times (24 h). The reaction was found to be most effective when a CuI catalyst was employed in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene as an additive. IR spectroscopy was utilized to follow the introduction and consumption of alkyne groups on the SWNTs, and Raman spectroscopy evidenced the conversion of a high proportion of sp(2) carbons to sp(3) hybridization during alkyne introduction. Thermogravimetric analysis indicated that the polymer-functionalized SWNTs consisted of 45% polymer, amounting to approximately one polymer chain for every 200-700 carbons of the nanotubes, depending on polymer molecular weight. Transmission electron microscopy and atomic force microscopy were utilized to image polymer-functionalized SWNTs, showing relatively uniform polymer coatings present on the surface of individual, debundled nanotubes.     

Water-soluble, exfoliated, nonroping single-wall carbon nanotubes

The scalable superacid solvent, radical-initiated aryldiazonium functionalization process produces individual SWNTs without the need for surfactant wrapping, centrifugation, or sonication. This work provides a facile pathway to aryl sulfonic acid-functionalized SWNTs that are not roped or bundled, and the functionalized nanotubes are water soluble.     

Rapidly functionalized, water-dispersed carbon nanotubes at high concentration

Microwave-assisted functionalization of single-wall carbon nanotubes (SWNTs) in a mixture of nitric and sulfuric acids was carried out to synthesize highly water-dispersible nanotubes. Stable concentrations as high as 10 mg/mL were obtained in deionized water that are nearly 2 orders of magnitude higher than those previously reported. This was after only 3 min of functionalization reaction. Fourier transform infrared spectra showed the presence of carboxylated (-COOH) and acid sulfonated (-SO(2).OH or -SO(3)(-) H(+)) groups on the SWNTs. On the basis of elemental analysis, it was estimated that one out of three carbon atoms was carboxylated, while one out of 10 carbon atoms was sulfonated. The Raman spectra taken both in aqueous dispersion and in the solid phase indicated charge transfer from the SWNT backbone to the functional groups. Scanning electron microscope images of thin films deposited from an aqueous suspension showed that the SWNTs were aligned parallel to one another on the substrate. The images also indicated some reduction in average length of the nanotubes. Transmission electron microscope images of thin films from a dilute methanol dispersion showed that the SWNTs were extensively debundled. Laser light scattering particle size measurements did not show evidence for the existence of particles in the 3-800 nm size range, indicating that the functionalized SWNTs might have dispersed to have formed a true solution. Moreover, the microwave-processed SWNTs were found to contain significantly smaller amounts of the original iron catalyst relative to that present in the starting nanotubes. The electrical conductivity of a thermally annealed thin membrane obtained from the microwave-functionalized SWNTs was found to be the same as that of a similar membrane obtained from a suspension of the starting nanotubes.     

High yield fabrication of semiconducting thin-film field-effect transistors based on chemically functionalized single-walled carbon nanotubes

Here we report a simple and scalable method to fabricate high performance thin-film field-effect transistors(FETs) with high yield based on chemically functionalized single-walled carbon nanotubes(SWNTs) by organic radical initiators.The UV-Vis-NIR spectra,Raman spectra and electrical characterization demonstrated that metallic species in CoMoCat 65 and HiPco SWNTs could be effectively eliminated after reaction with some organic radical initiators.The effects of the substrate properties on the electrical pr...     

Ultrathin "bed-of-nails" membranes of single-wall carbon nanotubes

Single-wall carbon nanotubes (SWNTs) were arranged in a membrane similar to a "bed-of-nails", in which a single layer of parallel SWNTs was densely packed and aligned along the normal to the membrane. The planar, free-standing, ultrathin SWNT membranes were prepared by milling a neat SWNT fiber with a gallium focused ion beam. The approach is readily applicable to cutting nanotubes to a desirable and precise length and enables further fabrication of devices using the "bed-of-nails" membranes to test the transport properties of SWNTs.     

Rheology of polycarbonate reinforcedwith functionalized and unfunctionalized single-walled carbon nanotubes

Nanocomposites of polycarbonate (PC) containing low concentrations of pristine and COOH and OH functionalized single-walled carbon nanotubes (SWNTs, COOH-SWNTs and OH-SWNTs) were prepared by melt-mixing and analyzed using rheology and scanning electron microscopy (SEM). The steady state and linear viscoelastic behavior of each nanocomposite material is presented and compared to that of the neat PC. SEM analysis revealed that samples containing functionalized SWNTs were more dispersible than samples containing the pristine SWNTs.     

卟啉和酞菁修饰的单壁碳纳米管的合成及光谱性质

利用5-(4-氨基苯基)-10,15,20-三(3,5-二辛氧基苯基)卟啉和2,9,16-三叔丁基-23-氨基锌(Ⅱ)酞菁通过酰胺键连接方式同时对单壁碳纳米管进行共价修饰, 通过红外光谱、拉曼光谱、X射线光电子能谱和透射电镜对所得碳纳米管复合物进行了表征, 证实了其结构. 紫外-可见吸收光谱和荧光光谱分析表明, 光活性分子卟啉和酞菁均与单壁碳纳米管之间存在较强的电子效应. 经卟啉和酞菁共同修饰的单壁碳纳米管复合物比卟啉和酞菁单独修饰的碳纳米管复合物的吸光范围更宽, 而且分散性较好(309 mg/L), 是潜在的光电转换材料.     

Functionalization of SWNTs to facilitate the coordination of metal ions, compounds and clusters

The carboxylate residues of the open ends of aryl-tert-butyl and arylsulfonic acid side-walled functionalized single walled carbon nanotubes (SWNTs) have been investigated for the complexation conditions of the iron-molybdenum cluster [H(x)PMo(12)O(40)CH(4)Mo(72)Fe(30)(O(2)CMe)(15)O(254)(H(2)O)(98)] ("FeMoC"). A range of alternative donor groups for the attachment of FeMoC have been investigated for piranha etched SWNTs, dodecyl side-walled functionalized SWNTs (DD-SWNTs) and ultra-short SWNTs (US-SWNTs), including include pyridines, thiols and phosphines, using coupling reactions to either the carboxylate or hydroxide residues of the SWNTs' open ends. The functionalized SWNTs have been characterized by XPS, uptake of Fe(3+) and, where appropriate, MAS (31)P NMR. The efficacy of binding is dependent on the presence and identity of the ligand moiety. TEM and AFM of the SWNT-FeMoC conjugates show the presence of a 2-3 nm spherical feature on the tip of individual SWNTs.     

Experimental and Computational Investigations of the Properties of Fluorinated Single‐Walled Carbon Nanotubes

Fluorination of single‐walled carbon nanotubes by reaction with elemental fluorine at elevated temperatures provides fluorinated single‐walled carbon nanotubes (F‐SWNT), which have the highest degree of functionalization (up to F/C=1/2) of any derivatized carbon‐nanotube material reported to date. Also, F‐SWNTs have received more scrutiny than any other functionalized carbon nanotubes. This Minireview covers experimental and computational investigations of F‐SWNTs with a focus on the nature and the strength of the C–F linkage.     

Preparation of single‐walled carbon nanotubes‐induced poly(p‐oxybenzoyl) crystals

Crystallization of oligomers was applied for the preparation of single‐walled carbon nanotubes (SWNTs)/poly(p‐oxybenzoyl) (POB) crystals using SWNTs as a nucleating agent. Polymerization conditions were investigated to induce the crystallization of POB oligomers through SWNTs. SWNTs/POB plate‐like or lozenge‐shaped crystals were successfully prepared by direct polymerization of p‐hydroxybenzoic acid (HBA) in a mixed solvent of DMF/Py with TsCl in the presence of functionalized SWNTs. The size of the plate‐like crystals were ～200 nm to 3 μm. The crystals consisted of some layers, ～3 nm thick plates. Model reactions showed that esterification reactions proceed between functionalized SWNTs and HBA monomers in the polymerization system. The obtained crystals exhibited unique morphology and high crystallinity, producing a novel SWNT/POB hybrid. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1265–1277, 2008     

Improving photocurrent generation: supramolecularly and covalently functionalized single-wall carbon nanotubes-polymer/porphyrin donor-acceptor nanohybrids

Novel nanohybrids based on covalently and noncovalently functionalized single-wall carbon nanotubes (SWNTs) have been prepared and assembled for the construction of photoactive electrodes. Polymer-grafted SWNTs were synthesized by free-radical polymerization of (vinylbenzyl)trimethylammonium chloride. Poly[(vinylbenzyl)trimethylammonium chloride] (PVBTAn+) was also noncovalently wrapped around SWNTs to form stable, positively charged SWNT/PVBTAn+ suspensions in water. Versatile donor-acceptor nanohybrids were prepared by using the electrostatic/van der Waals interactions between covalent SWNT-PVBTAn+ and/or noncovalent SWNT/PVBTAn+ and porphyrins (H2P8- and/or ZnP8-). Several spectroscopic, microscopic, transient, and photoelectrochemical measurements were taken to characterize the resulting supramolecular complexes. Photoexcitation of the nanohybrids afforded long-lived radical ion pairs with lifetimes as long as 2.2 micros. In the final part, photoactive electrodes were constructed by using a layer-by-layer technique on an indium tin oxide covered glass support. Photocurrent measurements gave remarkable internal photon-to-current efficiencies of 3.81 and 9.90 % for the covalent ZnP8-/SWNT-PVBTAn+ and noncovalent ZnP8-/SWNT/PVBTAn+ complex, respectively, when a potential of 0.5 V was applied.     

General method for synthesis of functionalized macrocycles and catenanes utilizing "click" chemistry

A new protocol for efficient and high yield synthesis of functionalized macrocycles and catenanes has been developed using "click" chemistry in combination with Sauvage's metal template route to interlocked structures. The procedure involves introduction of terminal alkyne moieties on a symmetrical 2,9-diaryl-1,10-phenanthroline (phen) building block, followed by double-"click" ring closure using aryl 3,5-diazides in the presence of CuI, sodium ascorbate, the base DBU and a sulfonated phenanthroline ligand in an oxygen-free 7:3:1 ethanol/water/toluene mixture at 70 degrees C. Utilizing acetal and vinyl substituted diazides, the corresponding bistriazole/phen macrocycles, characterized spectroscopically, were obtained in 65-70% yield. Formation of a binary Cu(I) complex of the diethynylphen ligand followed by reaction with aryl 3,5-diazides using a modified procedure affords the corresponding difunctionalized catenane in one step in 85-92% yield. The initial catenanes obtained after workup are Cu-free. Reintroduction of Cu(I) using Cu(CH3CN)4+PF6- gives the metallocatenanes, whose spectral properties are identical to those of related (phen)2Cu(I) catenanes reported by Sauvage and co-workers. This methodology provides ready access to functionalized interlocked structures, which can be used as intermediates in the preparation of a variety of new materials, including compounds of interest as artificial photosynthetic systems.     

Mechanical interlocking of SWNTs with N-rich macrocycles for efficient ORR electrocatalysis

Substitutional N-doping of single-walled carbon nanotubes is a common strategy to enhance their electrocatalytic properties in the oxygen-reduction reaction (ORR). Here, we explore the encapsulation of SWNTs within N-rich macrocycles as an alternative strategy to display electroactive sites on the surface of SWNTs. We design and synthesize four types of mechanically interlocked derivatives of SWNTs (MINTs) by combining two types of macrocycles and two types of SWNT samples. Comprehensive electrochemical characterization of these MINTs and their reference SWNTs allows us to establish structure–activity relationships. First, we show that all MINT samples are superior electrocatalysts compared to pristine SWNTs, which serves as general validation of our strategy. Secondly, we show that macrocycles displaying both N atoms and carbonyl groups perform better than those with N atoms only. Finally, we demonstrate that a tighter fit between macrocycles and SWNTs results in enhanced catalytic activity and stability, most likely due to a more effective charge-transfer between the SWNTs and the macrocycles. These results, focusing on the ORR as a testbed, show the possibility of understanding electrocatalytic performance of SWNTs at the molecular level and thus enable the design of more active and more stable catalysts in the future.

We present the encapsulation of SWNTs within N-rich macrocycles to enhance electrocatalytic activity towards the oxygen-reduction reaction.