Preparation of CdSe quantum dots with full color emission based on a room temperature injection technique

High quality CdSe quantum dots are synthesized through a room temperature injection technique by using CdAc2 and Na2SeSO3 as precursors. In this synthesis approach, small CdSe clusters are formed after the injection at room temperature. Thereafter, CdSe quantum dots with emissions from the green to the red region can be obtained by transferring these clusters to different temperatures (40-150 degrees C) for particle growth. Meanwhile, CdSe quantum dots with emission in the blue-violet region (500-430 nm) are gained by an oxidation etching approach using H2O2 as oxidant. The advantage of this method is the natural separation of the nucleation and the growth process, which can provide a longer time for the preparation of the nuclei in simple operations and a well controlled fluorescence of the products, as the evolution of the fluorescence is slow at this low particle growth temperature.     

Synthesis of green CdSe/chitosan quantum dots using a polymer-assisted γ-radiation route

Chitosan-coated CdSe quantum dots (CdSe/CS QDs) were successfully synthesized in aqueous system through a γ-radiation route at room temperature under ambient pressure. The diameter of the resulting QDs was about 4 nm with narrow size distribution. The synthesized QDs exhibited an absorption peak at 460 nm and an emission peak at 535 nm. These QDs were cubic zinc blende CdSe in core structure and coated with chitosan on surface, with fine solubility in water.     

Spectroscopic investigation of defect-state emission in CdSe quantum dots

CdSe quantum dots are the most studied Cd-based quantum dots with their high quantum yield, high photostability, narrow emission band, and easy synthesis procedure. They are frequently used to develop light emitting diode (LED) due to their unique photophysical properties; however, their narrow emission band causes a challenge to design white LEDs because white light emission requires emission in multiple wavelengths with broad emission bands. Here in this study, we developed CdSe quantum dots with a narrow band-edge emission band and broad defect-state emission band through a modified two-phase synthesis method. Our results revealed that defect-state emission is directly linked to the surface of quantum dots and can be excited through exciting surfactant around the quantum dot. The effect of surfactant on emission properties of CdSe quantum dots diminished upon growing a shell around CdSe quantum dots; as a result, surface-dependent defect-state emission cannot be observed in gradient heterogeneous alloyed CdS_xSe_1-x quantum dots.     

水溶性ZnO量子点制备及其光学性质

利用3-巯丙基三乙氧基硅烷对ZnO进行表面修饰后沉积SiO2, 制备出水溶性SiO2包覆ZnO的量子点. 与直接采用正硅酸乙酯沉积包覆SiO2的ZnO量子点相比, 362 nm处的激子荧光发射峰的强度提高了将近4倍. 由于表面引入了巯基官能团, 量子点的水溶性明显提高, 稳定性增强, 即使在较高的盐浓度下也不会团聚. 通过改变条件, 制备出了发光波长在420 nm的蓝色荧光量子点.     

Studies of optical and structural properties of CdSe/polymer nanocomposites: evidence of charge transfer and photostability

In this work, the role of conducting [poly (p-phenylinevinylene) (PPV)] and nonconducting (polystyrene) polymers on the properties of their respective composites with CdSe quantum dots of varied sizes has been investigated. The emission and structural properties of polymer–CdSe composites are found to be dependent on the crystallite size and morphology of CdSe nanocrystallites. Smaller CdSe quantum dots (size, ∼5 nm) ensures efficient charge transfer process across polymer–CdSe interface as evident by almost complete quenching of photoluminescence (PL) emission as compared to larger CdSe quantum dots (size, ∼7 nm). Presence of residual trioctylphosphine (TOP)/ tri-n-octylphosphine-oxide (TOPO) species and agglomeration of particles act as a hindrance for quenching of emission and hence charge transfer for larger CdSe nanocrystallites. Emission studies indicated an increased conjugation length for PPV polymers in different solvents (toluene, pyridine) and in solid state. Nonconducting polymer polystyrene shows charge transfer across polymer–CdSe interface as well. However, polystyrene polymer has a shorter chain length, which ensures maximum coverage on the surface of CdSe nanocrystallites and provides better photostability to CdSe QDs within the polymer matrix as compared to that for PPV–CdSe nanocomposites.     

柠檬酸盐稳定的水溶性CdSe量子点的合成及表征

以柠檬酸三钠为稳定剂在水溶液中合成了水溶性CdSe量子点,用X射线粉末衍射、透射电镜、紫外-可见吸收光谱和荧光发射光谱对CdSe量子点的结构、形貌及其荧光性质进行了表征.结果表明合成的CdSe量子点为立方闪锌矿结构,呈球形,分散性良好,平均尺寸约为2.6nm,具有窄且对称的荧光发射光谱,半峰宽为45nm.     

Role of surface modification of colloidal CdSe quantum dots on the properties of hybrid organic–inorganic nanocomposites

In this work, tri-octyl phosphine/tri-octyl phosphine oxide (TOPO)-capped cadmium selenide (CdSe) quantum dots (QDs) of varied sizes (5–9 nm), prepared by varying the input Cd:Se precursor ratio using chemical route, were dispersed in conducting polymer matrices viz. poly[2-methoxy, 5-(2-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and poly(3-hexylthiophene) (P3HT). By using a binary solvent mixture (pyridine–chloroform), homogeneous dispersion of CdSe nanocrystals in polymers (MEH-PPV, P3HT) could be realized. The properties of the resulting dispersions could be tailored by the composition and concentration of QDs in polymer. The emission and structural properties of polymer–CdSe nanocomposites are found to be dependent on the crystallite size and morphology of CdSe nanocrystallites. An effective quenching of photoluminescence emission in the polymer nanocomposite was observed for smaller CdSe quantum dots (size ∼6 nm) as compared to larger CdSe quantum dots (size ∼9 nm), thus ensuring efficient charge transfer process across the polymer–CdSe interface in the former case. The incomplete quenching, particularly for MEH-PPV:CdSe nanocomposites, could be as a result of insufficient coverage of polymers on the surface of CdSe nanocrystallites, mainly due to phase segregation for TOPO-stripped CdSe nanocrystallites. The superior morphology and optical properties of polymer nanocomposite (P3HT:CdSe QDs) could play a pivotal role for the realization of effective charge separation and transport in hybrid solar cells.     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

Investigation of the crystallization process in 2 nm CdSe quantum dots

Investigation of the growth of CdSe nanocrystals ( approximately 160 atoms) to the uniquely stable size of 2 nm allows the monitoring of the crystallization process in semiconductor quantum dots. By using a combination of optical techniques, high-resolution transmission electron microscopy (HRTEM), and powder X-ray diffractometry (XRD), new phenomena were explored during the CdSe nanocrystal growth process, which involved significant morphological reconstruction and crystallization of the initially formed amorphous nanoparticles. During the crystallization, the absorption onset of the CdSe quantum dots blue shifted toward higher energies at 3 eV (414 nm), while the photoluminescence red shifted to lower energies. Furthermore, an apparent increasing Stokes shift was observed during the formation of small CdSe nanoparticles. On the other hand, the photoluminescence excitation spectra showed constant features over the reaction time. Additionally, results from HRTEM and XRD studies show that the CdSe nanoparticles were amorphous at early reaction stages and became better crystallized after longer reaction times, while the particle size remained the same during the crystallization process. These observations demonstrate the important role of the surface on the optical properties of small CdSe quantum dots and facilitated the spectroscopic monitoring of the crystallization process in quantum dots.     

CdSe/CdS/SiO2复合纳米球的制备及发光性能

采用两相法合成了CdSe/CdS核-壳结构的量子点, 用氨水催化水解正硅酸乙酯制得复合结构的CdSe/CdS/SiO₂发光纳米球. 通过对量子点用量、氨水用量、反应时间及溶剂比例等实验条件的调节, 得到了单分散性较好, 尺寸在23~145 nm的复合发光纳米球. 利用紫外-可见吸收光谱和荧光发射光谱对其发光性能进行了研究, 同时利用透射电镜(TEM)观察复合纳米球的形貌. 结果表明, 复合发光纳米球样品的最高荧光量子产率可达8%.     

Photoactivated Fluorescence Enhancement in F,N‐Doped Carbon Dots with Piezochromic Behavior

Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co‐doped carbon dots (F,N‐doped CDs) is presented. At 1.0 atm, the fluorescence intensity of F,N‐doped CDs increases with UV light irradiation (5 s–30 min), accompanied with a blue‐shift of the fluorescence emission from 586 nm to 550 nm. F,N‐doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1 GPa). F,N‐doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0 atm to 9.98 GPa), showing a pressure‐triggered aggregation‐induced emission in the range 1.0 atm–0.65 GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high‐pressure conditions and enhances their anti‐photobleaching.     

Fluorescence Labeling and Determination of Pepsin with CdSe Quantum Dots

Based on the solid phase/liquid deposition CdSe quantum dots (QD) were synthesized using selenium and cadmium‐salt as precursor at room temperature. The average diameter of CdSe QD estimated from the high resolution transmission electron microscopy (HRTEM) graph and absorption spectra was ca. 3–3.5 nm. The mercaptoacetic‐acid stabilized CdSe QD exhibited ultraviolet absorption at 350 and 380 nm and strong fluorescence emission at 481.6 nm, respectively. When conjugated with pepsin, the fluorescence peak intensity of CdSe QD decreased considerably and the fluorescence peak shifted to 467.2 nm. Under optimal conditions, a concentration in 5–50 mg· L^?1 of pepsin could be determined on the basis of fluorescence decrease ratio of CdSe QD, with a detection limit 3δ of 0.36 mg·L^?1 (n=10). The proposed method was applied to detection of the concentration of pepsin in human gastric juice.     

The Application of CdSe Quantum Dots with Multicolor Emission as Fluorescent Probes for Cell Labeling

Herein, highly luminescent CdSe quantum dots (QDs) with emissions from the blue to the red region of visible light were synthesized by using a simple method. The emission range of the CdSe QDs could be tuned from λ=503 to 606 nm by controlling the size of the CdSe QDs. Two amino acids, L ‐tryptophan (L ‐Trp) and L ‐arginine (L ‐Arg), were used as coating agents. The quantum yield (QY) of CdSe QDs (green color) with an optimized thickness could reach up to 52 %. The structures and compositions of QDs were examined by using X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Optical properties were studied by using UV/Vis and photoluminescence (PL) spectroscopy and a comparison was made between uncoated and coated CdSe QDs. The amino acid‐modified β‐cyclodextrin (CD)‐coated CdSe QDs presented lower cytotoxicity to cells for 48 h. Furthermore, amino acid‐modified β‐CD‐coated green CdSe QDs in HepG2 cells were assessed by using confocal laser scanning fluorescence microscopy. The results showed that amino acid‐modified β‐CD‐coated green CdSe QDs could enter tumor cells efficiently and indicated that biomolecule‐coated QDs could be used as a potential fluorescent probe.     

Temperature-dependent photoluminescence of water-soluble quantum dots for a bioprobe

The photoluminescence of water-soluble CdSe/ZnS core/shell quantum dots is found to be temperature-dependent: as temperature arising from 280 K to 351 K, the photoluminescence declines with emission peak shifting towards the red at a rate of ∼0.11 nm K⁻¹. And the studies show that the photoluminescence of water-soluble CdSe/ZnS quantum dots with core capped by a thinner ZnS shell is more sensitive to temperature than that of ones with core capped by a thicker one. That is, with 50% decrement of the quantum yield the temperature of the former need to arise from 280 K to 295 K, while the latter requires much higher temperature (315.6 K), which means that the integrality of shell coverage is a very important factor on temperature-sensitivity to for the photoluminescence of water-soluble CdSe/ZnS quantum dots. Moreover, it is found that the water-soluble CdSe quantum dots with different core sizes, whose cores are capped by thicker ZnS shells, possess almost the same sensitivity to the temperature. All of the studies about photoluminescence temperature-dependence of water-soluble CdSe/ZnS core/shell quantum dots show an indispensable proof for their applications in life science.     

Type-II quantum dots: CdTe/CdSe(core/shell) and CdSe/ZnTe(core/shell) heterostructures

Type-II band engineered quantum dots (CdTe/CdSe(core/shell) and CdSe/ZnTe(core/shell) heterostructures) are described. The optical properties of these type-II quantum dots are studied in parallel with their type-I counterparts. We demonstrate that the spatial distribution of carriers can be controlled within the type-II quantum dots, which makes their properties strongly governed by the band offset of the comprising materials. This allows access to optical transition energies that are not restricted to band gap energies. The type-II quantum dots reported here can emit at lower energies than the band gaps of comprising materials. The type-II emission can be tailored by the shell thickness as well as the core size. The enhanced control over carrier distribution afforded by these type-II materials may prove useful for many applications, such as photovoltaics and photoconduction devices.     

Effects of bifunctional linker on the optical properties of ZnO nanocolumn-linker-CdSe quantum dots heterostructure

We study the effects of bifunctional linker on the optical properties of ZnO nanocolumn-linker-CdSe quantum dots heterostructure. The CdSe quantum dots are anchored on the surface of ZnO nanocolumns through either aliphatic linker of 3-aminopropyl trimethoxysilane (APS) or aromatic linker of p-aminophenyl trimethoxysilane (APhS). X-ray photoelectron spectroscopy is used to confirm the bifunctional linker bound onto CdSe quantum dots and onto the ZnO nanocolumns. The TEM study reveals a CdSe quantum dot shell of about 15 nm coated on the ZnO nanocolumns. The photoluminance (PL) spectroscopy and time-resolved PL spectroscopy of ZnO nanocolumn-linker-CdSe quantum dots reflects that the photo-induced electron transfer across the interface of ZnO and CdSe through the aromatic APhS is more efficient than the aliphatic APS. This study demonstrates that through the usage of appropriate surface linker, the charge transfer rate across the interfaces of donor/acceptor (D/A) heterostructure can be improved for potential photovoltaic cell applications.     

The electrochemical behavior of core-shell CdSe/CdS magic-sized quantum dots linked to cyclodextrin for studies of the encapsulation of bioactive compounds

Semiconductor nanocrystal quantum dots have been the subject of extensive investigations in different areas of science and technology in the past years. In particular, there are few studies of magic-sized quantum dots (MSQDs), even though they exhibit features such as extremely small size, fluorescence quantum efficiency, molar absorptivity greater than traditional QDs, and highly stable luminescence in HeLa cell cultures, thereby enabling monitoring of biological or chemical processes. The present study investigated the electrochemical behavior of free CdSe/CdS MSQDs using glassy carbon electrode and CdSe/CdS MSQDs immobilized on a gold electrode modified with a self-assembled cyclodextrin monolayer. The MSQDs showed two peaks in aprotic medium. The functionalized film modifier was prepared and characterized by means of cyclic voltammetry and electrochemical impedance spectroscopy using ferricyanide ions as a redox probe. The prepared modified electrode exhibited a stable behavior. The proposed method was successfully applied to encapsulation studies of mangiferin, a natural antioxidant compound, and cyclodextrin associated with the quantum dot, and the response was compared with that of the modified electrode without QD. The fluorescence study revealed that CdSe/CdS quantum dots emit blue light when excited by an optical source of wavelength of 350 nm and a significant increase in fluorescence and absorbance intensity is observed from the core-shell CdSe/CdS MSQDs when quantities of mangiferin are added to the solution containing thiolated cyclodextrin. CdSe/CdS MSQDs are optically and electrochemically sensitive and can be used for the detection and interaction of compounds encapsulated in cyclodextrin.     

CdSe/ZnS quantum dots based fluorescence quenching method for determination of paeonol

Aqueous polymethylmethacrylate (PMMA)-capped CdSe/ZnS quantum dots were used as fluorescence probes for paeonol determination. Based on the fluorescence quenching of aqueous CdSe/ZnS quantum dots caused by paeonol, a simple, sensitive and rapid method was developed. Under the optimal conditions, with excitation and emission wavelengths at 350 nm and 620 nm, respectively, the calibration plot of F0-F with concentration of paeonol was linear in the range of 25.04-175.2 mg L(-1) with correlation coefficient of 0.9986. The limit of detection was 0.017 mg L(-1). The concentration of paeonol in paeonol ointment was determined by the proposed method and the result agreed with the claimed value. Furthermore, the possible fluorescence quenching mechanism was discussed.     

Electrochemiluminescence of CdSe Quantum Dots Composited with Nitrogen‐Doped Carbon Nanotubes

A nanocomposite of CdSe quantum dots with nitrogen‐doped carbon nanotubes was prepared for enhancing the electrochemiluminescent (ECL) emission of quantum dots. With hydrogen peroxide as co‐reactant, the nanocomposite modified electrode showed a cathodic ECL emission with a starting potential of ?0.97 V (vs. Ag/AgCl) in phosphate buffer solution, which was five‐times stronger than that from pure CdSe quantum dots and three‐times stronger than that from CdSe quantum dots composited with carbon nanotubes. The latter showed a starting potential of ?1.19 V. This result led to a sensitive ECL sensing of hydrogen peroxide with good stability, acceptable reproducibility and a detection limit down to 2.1×10^?7 mol L^?1. Nitrogen‐doped carbon nanotubes could be used as a good material for the construction of sensitive ECL biosensors for chemical and biochemical analysis.     

表面配体对CdSe量子点发光性质的影响

本文采用热注入法合成了以油胺/油酸为表面配体的、粒径均一的CdSe量子点(CdSe QDs)。调节表面配体交换中辛硫醇与CdSe QDs的比例,研究了表面配体对CdSe QDs光致发光及电致化学发光性质的影响,并提出了CdSe QDs的发光模型。结果表明,辛硫醇表面配体显著影响CdSe QDs的带边发射和深能级陷阱发射,因而导致CdSe QDs光致发光强度的显著降低,以及电致化学发光强度的增加。上述结果为进一步提高量子点的发光性能提供了依据。