Fabrication of ZIF‐8@SiO2 Core–Shell Microspheres as the Stationary Phase for High‐Performance Liquid Chromatography

The unique features of high porosity, shape selectivity, and multiple active sites make metal–organic frameworks (MOFs) promising as novel stationary phases for high‐performance liquid chromatography (HPLC). However, the wide particle size distribution and irregular shape of conventional MOFs lead to lower column efficiency of such MOF‐packed columns. Herein, the fabrication of monodisperse MOF@SiO₂ core–shell microspheres as the stationary phase for HPLC to overcome the above‐mentioned problems is reported. Zeolitic imidazolate framework 8 (ZIF‐8) was used as an example of MOFs due to its permanent porosity, uniform pore size, and exceptional chemical stability. Unique carboxyl‐modified silica spheres were used as the support to grow the ZIF‐8 shell. The fabricated monodisperse ZIF‐8@SiO₂ packed columns (5 cm long × 4.6 mm i.d.) show high column efficiency (23 000 plates m^?1 for bisphenol A) for the HPLC separation of endocrine‐disrupting chemicals (bisphenol A, β‐estradiol, and p‐(tert‐octyl)phenol) and pesticides (thiamethoxam, hexaflumuron, chlorantraniliprole, and pymetrozine) within 7 min with good relative standard deviations for 11 replicate separations of the analytes (0.01–0.39, 0.65–1.7, 0.70–1.3, and 0.17–0.91 % for retention time, peak area, peak height, and half peak width, respectively). The ZIF‐8@SiO₂ microspheres combine the advantages of the good column packing properties of the uniform monodisperse silica microspheres and the separation ability of the ZIF‐8 crystals.     

Polystyrene‐Supported Core–Shell Beads with Aluminium MOF Coating for Extraction of Organic Pollutants

Aluminium‐based metal–organic framework (MOF) coatings on polystyrene bead surfaces were easily synthesized by reacting an intermediate metal hydroxide coating with an organic linker. Several different sizes of polystyrene beads were coated with aluminium metal hydroxide to construct Al@PS core–shell bead materials. The activated Al@PS core–shell beads were involved to make a homogenous MOF‐based layer in the presence of the organic linker. By using different sizes of the PS support the size of MOFs on the PS composites could be fine‐tuned under specific reaction conditions. MOF‐coated core–shell bead materials (Al‐1,4‐NDC@PS and MIL‐53(Al)@PS) were characterized using various analytical techniques. Al‐1,4‐NDC@PS and MIL‐53(Al)@PS were evaluated for solid‐phase microextraction (SPME) of hydrophobic polycyclic aromatic hydrocarbons (PAHs) and hydrophilic non‐steroidal anti‐inflammatory drugs (NSAIDs), respectively. Al‐1,4‐NDC@PS‐1000 displayed high extraction recoveries ranging from 79.2 % to 99.8 % in the SPME of PAHs. Meanwhile, MIL‐53(Al)@PS‐1000 showed 85.9–99.0 % extraction recoveries in the SPME of NSAIDs. These results show that the proposed approach holds potential to extract organic analytes on an industrial scale.     

Hollow Zn/Co Zeolitic Imidazolate Framework (ZIF) and Yolk–Shell Metal@Zn/Co ZIF Nanostructures

Metal–organic frameworks (MOFs) feature a great possibility for a broad spectrum of applications. Hollow MOF structures with tunable porosity and multifunctionality at the nanoscale with beneficial properties are desired as hosts for catalytically active species. Herein, we demonstrate the formation of well‐defined hollow Zn/Co‐based zeolitic imidazolate frameworks (ZIFs) by use of epitaxial growth of Zn‐MOF (ZIF‐8) on preformed Co‐MOF (ZIF‐67) nanocrystals that involve in situ self‐sacrifice/excavation of the Co‐MOF. Moreover, any type of metal nanoparticles can be accommodated in Zn/Co‐ZIF shells to generate yolk–shell metal@ZIF structures. Transmission electron microscopy and tomography studies revealed the inclusion of these nanoparticles within hollow Zn/Co‐ZIF with dominance of the Zn‐MOF as shell. Our findings lead to a generalization of such hollow systems that are working effectively to other types of ZIFs.     

Pd Nanocubes@ZIF‐8: Integration of Plasmon‐Driven Photothermal Conversion with a Metal–Organic Framework for Efficient and Selective Catalysis

Composite nanomaterials usually possess synergetic properties resulting from the respective components and can be used for a wide range of applications. In this work, a Pd nanocubes@ZIF‐8 composite material has been rationally fabricated by encapsulation of the Pd nanocubes in ZIF‐8, a common metal–organic framework (MOF). This composite was used for the efficient and selective catalytic hydrogenation of olefins at room temperature under 1 atm H₂ and light irradiation, and benefits from plasmonic photothermal effects of the Pd nanocube cores while the ZIF‐8 shell plays multiple roles; it accelerates the reaction by H₂ enrichment, acts as a “molecular sieve” for olefins with specific sizes, and stabilizes the Pd cores. Remarkably, the catalytic efficiency of a reaction under 60 mW cm^?2 full‐spectrum or 100 mW cm^?2 visible‐light irradiation at room temperature turned out to be comparable to that of a process driven by heating at 50 °C. Furthermore, the catalyst remained stable and could be easily recycled. To the best of our knowledge, this work represents the first combination of the photothermal effects of metal nanocrystals with the favorable properties of MOFs for efficient and selective catalysis.     

Catalytically Active Hollow Fiber Membranes with Enzyme‐Embedded Metal–Organic Framework Coating

Metal–organic frameworks (MOFs) are suitable enzyme immobilization matrices. Reported here is the in situ biomineralization of glucose oxidase (GOD) into MOF crystals (ZIF‐8) by interfacial crystallization. This method is effective for the selective coating of porous polyethersulfone microfiltration hollow fibers on the shell side in a straightforward one‐step process. MOF layers with a thickness of 8 μm were synthesized, and fluorescence microscopy and a colorimetric protein assay revealed the successful inclusion of GOD into the ZIF‐8 layer with an enzyme concentration of 29±3 μg cm^?2. Enzymatic activity tests revealed that 50 % of the enzyme activity is preserved. Continuous enzymatic reactions, by the permeation of β‐d ‐glucose through the GOD@ZIF‐8 membranes, showed a 50 % increased activity compared to batch experiments, emphasizing the importance of the convective transport of educts and products to and from the enzymatic active centers.     

Metal–Organic Framework/PVDF Composite Membranes with High H2 Permselectivity Synthesized by Ammoniation

Herein we report a new ammoniation‐based chemical modification strategy for synthesis of continuous and uniform metal–organic framework (MOF)/polyvinylidene fluoride (PVDF) membranes with attractive performance. Ammoniation can promote the support PVDF membrane to produce amino groups, form a nanoparticle structure, and be well cross‐linked; therefore, the high‐density heterogeneous nucleation sites for MOFs growth were provided and the thermal stability and chemical resistance of composite membranes can be greatly improved. The high‐quality layers of representative Cu‐BTC and ZIF‐8 were synthesized on the chemically modified PVDF membranes. By ammoniation, ZIF‐7 can even be grown under harsh synthetic conditions such as in DMF precursor solutions at 403 K. The fabricated MOF/PVDF composite membranes with excellent hollow fiber structures and enhanced structural stability exhibited high H₂ permselectivities for H₂/CO₂ and H₂/N₂.     

From Metal–Organic Framework to Intrinsically Fluorescent Carbon Nanodots

Highly photoluminescent carbon nanodots (CNDs) were synthesized for the first time from metal–organic framework (MOF, ZIF‐8) nanoparticles. Coupled with fluorescence and non‐toxic characteristics, these carbon nanodots could potentially be used in biosafe color patterning.     

Atypical Hybrid Metal–Organic Frameworks (MOFs): A Combinative Process for MOF‐on‐MOF Growth,Etching, and Structure Transformation

The structural, compositional, and morphological features of metal–organic frameworks (MOFs) govern their properties and applications. Construction of hybrid MOFs with complicated structures, components, or morphologies is significant for the development of well‐organized MOFs. An advanced route is reported for construction of atypical hybrid MOFs with unique morphologies and complicated components: 1) MOF‐on‐MOF growth of a 3D zeolitic imidazolate framework (ZIF) on a ZIF‐L template, 2) etching of a part of the 2D ZIF‐L template, and 3) structural transformation of 2D ZIF‐L into 3D ZIF. The formation of core–shell‐type MOF rings and plates is controlled by regulating the three processes. The formation route for the core–shell‐type MOF rings and plates was monitored by tracking changes in morphology, structure, and composition. Carbon materials prepared from the pyrolysis of the core–shell‐type hybrid MOFs displayed enhanced oxygen reduction reaction activities compared to their monomeric counterparts.     

Chiral Metal–Organic Framework Hollow Nanospheres for High‐Efficiency Enantiomer Separation

Chiral ZIF‐8 hollow nanospheres with d ‐histidine as part of chiral ligands (denoted as H‐d ‐his‐ZIF‐8) were prepared for separation of (±)‐amine acids. Compared to bulk d ‐his‐ZIF‐8 without a hollow cavity, the prepared H‐d ‐his‐ZIF‐8 showed 15 times higher separation capacity and higher ee values of 90.5 % for alanine, 95.2 % for glutamic acid and 92.6 % for lysine, respectively.     

Interactive Thermal Effects on Metal–Organic Framework Polymer Composite Membranes

Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO₂ sequestration, H₂ production, and water supply and disposal. Mixed‐matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF‐8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm‐sized ZIF‐8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C).     

Metal–Organic Framework (MOF) Nanorods,Nanotubes, and Nanowires

New mechanisms for the controlled growth of one‐dimensional (1D) metal–organic framework (MOF) nano‐ and superstructures under size‐confinement and surface‐directing effects have been discovered. Through applying interfacial synthesis templated by track‐etched polycarbonate (PCTE) membranes, congruent polycrystalline zeolitic imidazolate framework‐8 (ZIF‐8) solid nanorods and hollow nanotubes were found to form within 100 nm membrane pores, while single crystalline ZIF‐8 nanowires grew inside 30 nm pores, all of which possess large aspect ratios up to 60 and show preferential crystal orientation with the {100} planes aligned parallel to the long axis of the pore. Our findings provide a generalizable method for controlling size, morphology, and lattice orientation of MOF nanomaterials.     

Amorphous Metal–Organic Framework‐Dominated Nanocomposites with Both Compositional and Structural Heterogeneity for Oxygen Evolution

Amorphous metal–organic frameworks (aMOFs) are an emerging family of attractive materials with great application potential, however aMOFs are usually prepared under harsh conditions and aMOFs with complex compositions and structures are rarely reported. In this work, an aMOF‐dominated nanocomposite (aMOF‐NC) with both structural and compositional complexity has been synthesized using a facile approach. A ligand‐competition amorphization mechanism is proposed based on experimental and density functional theory calculation results. The aMOF‐NC possesses a core–shell nanorod@nanosheet architecture, including a Fe‐rich Fe‐Co‐aMOF core and a Co‐rich Fe‐Co‐aMOF shell in the core–shell structured nanorod, and amorphous Co(OH)₂ nanosheets as the outer layer. Benefiting from the structural and compositional heterogeneity, the aMOF‐NC demonstrates an excellent oxygen evolution reaction activity with a low overpotential of 249 mV at 10.0 mA cm^?2 and Tafel slope of 39.5 mV dec^?1.     

Poly(p‐vinylbenzoic acid)‐block‐polystyrene Self‐assembled Structures as Templates in the Synthesis of ZIF‐8

Hybrid nanocrystals of PVBA‐b ‐PS/ZIF‐8 were prepared by the growth of ZIF‐8 on the surface of the self‐assembled structures from poly(p ‐vinylbenzoic acid)‐block‐polystyrene. Two different morphologies—micelles and vesicles—were obtained in selective solvents owing to the different ratios of PVBA to PS blocks. The structure and morphology of the PVBA‐b ‐PS/ZIF‐8 composites were characterized by Fourier transform IR spectroscopy, thermogravimetric analysis, X‐ray diffraction, transmission electron microscopy and scanning electron microscopy. PVBA‐b ‐PS/ZIF‐8 showed high catalytic performance in Knoevenagel condensation reactions at room temperature, which were attributed to the more exposed active sites of the small ZIF‐8 nanocrystals grown in a confined space and a high concentration of reactants in the polymeric aggregates.     

Modulating the Biofunctionality of Metal–Organic‐Framework‐Encapsulated Enzymes through Controllable Embedding Patterns

Embedding an enzyme within a MOF as exoskeleton (enzyme@MOF) offers new opportunities to improve the inherent fragile nature of the enzyme, but also to impart novel biofunctionality to the MOF. Despite the remarkable stability achieved for MOF‐embedded enzymes, embedding patterns and conversion of the enzymatic biofunctionality after entrapment by a MOF have only received limited attention. Herein, we reveal how embedding patterns affect the bioactivity of an enzyme encapsulated in ZIF‐8. The enzyme@MOF can maintain high activity when the encapsulation process is driven by rapid enzyme‐triggered nucleation of ZIF‐8. When the encapsulation is driven by slow coprecipitation and the enzymes are not involved in the nucleation of ZIF‐8, enzyme@MOF tends to be inactive owing to unfolding and competing coordination caused by the ligand, 2‐methyl imidazole. These two embedding patterns can easily be controlled by chemical modification of the amino acids of the enzymes, modulating their biofunctionality.     

Magnetic porous carbon derived from a Zn/Co bimetallic metal–organic framework as an adsorbent for the extraction of chlorophenols from water and honey tea samples

A novel magnetic porous carbon derived from a bimetallic metal–organic framework, Zn/Co‐MPC, was prepared by introducing cobalt into ZIF‐8. Magnetic porous carbon that possesses magnetic properties and a large specific surface area was firstly fabricated by the direct carbonization of Zn/Co‐ZIF‐8. The prepared magnetic porous carbon material was characterized by scanning electron microscopy, transmission electron microscopy, powder X‐ray diffraction, N₂ adsorption, and vibrating sample magnetometry. The prepared magnetic porous carbon was used as a magnetic solid‐phase extraction adsorbent for the enrichment of chlorophenols from water and honey tea samples before high‐performance liquid chromatography analysis. Several experimental parameters that could influence the extraction efficiency were investigated and optimized. Under the optimum conditions, good linearities (r > 0.9957) for all calibration curves were obtained with low limits of detection, which are in the range of 0.1–0.2 ng mL^?1 for all the analytes. The results showed that the prepared magnetic porous carbon had an excellent adsorption capability toward the target analytes.     

Well‐Defined Metal–Organic Framework Hollow Nanocages

Metal–organic frameworks (MOFs) have demonstrated great potentials in a variety of important applications. To enhance the inherent properties and endow materials with multifunctionality, the rational design and synthesis of MOFs with nanoscale porosity and hollow feature is highly desired and remains a great challenge. In this work, the formation of a series of well‐defined MOF (MOF‐5, Fe^II‐MOF‐5, Fe^III‐MOF‐5) hollow nanocages by a facile solvothermal method, without any additional supporting template is reported. A surface‐energy‐driven mechanism may be responsible for the formation of hollow nanocages. The addition of pre‐synthesized poly(vinylpyrrolidone)‐ (PVP) capped noble‐metal nanoparticles into the synthetic system of MOF hollow nanocages yields the yolk–shell noble metal@MOF nanostructures. The present strategy to fabricate hollow and yolk–shell nanostructures is expected to open up exciting opportunities for developing a novel class of inorganic–organic hybrid functional nanomaterials.     

Formation of Ultrathin,Continuous Metal–Organic Framework Membranes on Flexible Polymer Substrates

Metal–organic framework (MOF) materials have an enormous potential in separation applications, but to realize their potential as semipermeable membranes they need to be assembled into thin continuous macroscopic films for fabrication into devices. By using a facile immersion technique, we prepared ultrathin, continuous zeolitic imidazolate framework (ZIF‐8) membranes on titania‐functionalized porous polymeric supports. The coherent ZIF‐8 layer was surprisingly flexible and adhered well to the support, and the composite membrane could sustain bending and elongation. The membranes exhibited molecular sieving behavior, close to the theoretical permeability of ZIF‐8, with hydrogen permeance up to 201×10^?7 mol m^?2 s^?1 Pa^?1 and an ideal H₂/CO₂ selectivity of 7:1. This approach offers significant opportunities to exploit the unique properties of MOFs in the fabrication of separation and sensing devices.     

Well‐Arranged and Confined Incorporation of PdCo Nanoparticles within a Hollow and Porous Metal–Organic Framework for Superior Catalytic Activity

A convenient method for the confined incorporation of highly active bimetallic PdCo nanocatalysts within a hollow and porous metal–organic framework (MOF) support is presented. Several chemical conversions occur simultaneously during the one‐step low temperature pyrolysis of well‐designed polystyrene@ZIF‐67/Pd²⁺ core–shell microspheres, where ZIF (zeolitic imidazolate framework) is a subclass of MOF: the polystyrene core is removed, resulting in a beneficial hollow and porous ZIF support; the ZIF‐67 shell acts as a well‐defined porous support and as a felicitous Co²⁺ supplier for metal nanoparticle formation; and Pd²⁺ and Co²⁺ are reduced to form catalytically active bimetallic PdCo nanoparticles in the well‐defined micropores, inducing the confined growth of PdCo nanoparticles with excellent dispersity.     

Hollow Zn/Co ZIF Particles Derived from Core–Shell ZIF‐67@ZIF‐8 as Selective Catalyst for the Semi‐Hydrogenation of Acetylene

The rational design of metal–organic frameworks (MOFs) with hollow features and tunable porosity at the nanoscale can enhance their intrinsic properties and stimulates increasing attentions. In this Communication, we demonstrate that methanol can affect the coordination mode of ZIF‐67 in the presence of Co²⁺ and induces a mild phase transformation under solvothermal conditions. By applying this transformation process to the ZIF‐67@ZIF‐8 core–shell structures, a well‐defined hollow Zn/Co ZIF rhombic dodecahedron can be obtained. The manufacturing of hollow MOFs enables us to prepare a noble metal@MOF yolk‐shell composite with controlled spatial distribution and morphology. The enhanced gas storage and porous confinement that originate from the hollow interior and coating of ZIF‐8 confers this unique catalyst with superior activity and selectivity toward the semi‐hydrogenation of acetylene.     

Modulating Guest Uptake in Core–Shell MOFs with Visible Light

A two‐component core–shell UiO‐68 type metal–organic framework (MOF) with a nonfunctionalized interior for efficient guest uptake and storage and a thin light‐responsive outer shell was prepared by initial solvothermal MOF synthesis followed by solvent‐assisted linker exchange. The bulky shell linker features two tetra‐ortho‐fluorinated azobenzene moieties to exploit their advantageous photoisomerization properties. The obtained perfect octahedral MOF single crystals can be switched repeatedly and with an unprecedented efficiency between E‐ and Z‐rich states using visible light only. Due to the high photoswitch density per pore of the shell layer, its steric demand and thus molecular uptake (and release) can be conveniently modulated upon green and blue light irradiation. Therefore, the “smart” shell acts as a light‐controlled kinetic barrier or “gate” for the diffusion of cargo molecules in and out of the MOF crystals.