Controllable Self‐Assembly of Organic–Inorganic Amphiphiles Containing Dawson Polyoxometalate Clusters

An organic–inorganic molecular hybrid containing the Dawson polyoxometalate, ((C₄H₉)₄N)₅H‐ [P₂V₃W₁₅O₅₉(OCH₂)₃CNHCOC₁₅H₃₁], was synthesized and its surfactant‐like amphiphilic properties, represented by the formation of bilayer vesicles, were studied in polar solvents. The vesicle size decreases with both decreasing hybrid concentration and with increasing polarity of the solvent, independently. The self‐assembly behavior of this hybrid can be controlled by introducing different counterions into the acetonitrile solutions. The addition of ZnCl₂ and NaI can cause a gradual decrease and increase of vesicular sizes, respectively. Tetraalkylammonium bromide is found to disassemble the vesicle assemblies. Moreover, the original counterions of the hybrid can be replaced with protons, resulting in pH‐dependent formation of vesicles in aqueous solutions. The hybrid surfactant can further form micro‐needle structures in aqueous solutions upon addition of Ca²⁺ ions.     

Effect of Confinement on the Properties of Sequestered Mixed Polar Solvents: Enzymatic Catalysis in Nonaqueous 1,4‐Bis‐2‐ethylhexylsulfosuccinate Reverse Micelles

The influence of different glycerol, N,N‐dimethylformamide (DMF) and water mixtures encapsulated in 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT)/n‐heptane reverse micelles (RMs) on the enzymatic hydrolysis of 2‐naphthyl acetate by α‐chymotrypsin is demonstrated. In the case of the mixtures with DMF and protic solvents it has been previously shown, using absorption, emission and dynamic light‐scattering techniques, that solvents are segregated inside the polar core of the RMs. Protic solvents anchor to the AOT, whereas DMF locates to the polar core of the aggregate. Thus, DMF not only helps to solubilize the hydrophobic substrate, increasing its effective concentrations but surprisingly, it does not affect the enzyme activity. The importance of ensuring the presence of RMs, encapsulation of the polar solvents and the corrections by substrate partitioning in order to obtain reliable conclusions is highlighted. Moreover, the effect of a constrained environment on solvent–solvent interactions in homogenous media and its impact on the use of RMs as nanoreactors is stressed.     

A Light‐Responsive Metal–Organic Framework Hybrid Membrane with High On/Off Photoswitchable Proton Conductivity

Mimicking biological proton pumps to achieve stimuli‐responsive protonic solids has long been of great interest for their diverse applications in fuel cells, chemical sensors, and bio‐electronic devices. Now, dynamic light‐responsive metal–organic framework hybrid membranes can be obtained by in situ encapsulation of photoactive molecules (sulfonated spiropyran, SSP), as the molecular valve, into the cavities of the host ZIF‐8. The configuration of SSP can be changed and switched reversibly in response to light, generating different mobile acidic protons and thus high on/off photoswitchable proton conductivity in the hybrid membranes and device. This device exhibits a high proton conductivity, fast response time, and extremely large on/off ratio upon visible‐light irradiation. This approach might provide a platform for creating emerging smart protonic solids with potential applications in the remote‐controllable chemical sensors or proton‐conducting field‐effect transistors.     

Self‐Assembly of DNA–Oligo(p‐phenylene‐ethynylene) Hybrid Amphiphiles into Surface‐Engineered Vesicles with Enhanced Emission

Surface‐addressable nanostructures of linearly π‐conjugated molecules play a crucial role in the emerging field of nanoelectronics. Herein, by using DNA as the hydrophilic segment, we demonstrate a solid‐phase “click” chemistry approach for the synthesis of a series of DNA–chromophore hybrid amphiphiles and report their reversible self‐assembly into surface‐engineered vesicles with enhanced emission. DNA‐directed surface addressability of the vesicles was demonstrated through the integration of gold nanoparticles onto the surface of the vesicles by sequence‐specific DNA hybridization. This system could be converted to a supramolecular light‐harvesting antenna by integrating suitable FRET acceptors onto the surface of the nanostructures. The general nature of the synthesis, surface addressability, and biocompatibility of the resulting nanostructures offer great promises for nanoelectronics, energy, and biomedical applications.     

Controllable Self‐Assembly of Amphiphilic Zwitterionic PBI Towards Tunable Surface Wettability of the Nanostructures

Amphiphilic molecules have received wide attention as they possess both hydrophobic and hydrophilic properties, and can form diverse nanostructures in selective solvents. Herein, we report an asymmetric amphiphilic zwitterionic perylene bisimide ( AZP ) with an octyl chain and a zwitterionic group on the opposite imide positions of perylene tetracarboxylic dianhydride. The controllable nanostructures of AZP with tunable hydrophilic/hydrophobic surface have been investigated through solvent‐dependent amphiphilic self‐assembly as confirmed by SEM, TEM, and contact angle measurements. The planar perylene core of AZP contributes to strong π–π stacking, while the amphiphilic balance of asymmetric AZP adjusts the self‐assembly property. Additionally, due to intermolecular π–π stacking and solvent–solute interactions, AZP could self‐assemble into hydrophilic microtubes in a polar solvent (acetone) and hydrophobic nanofibers in an apolar solvent (hexane). This facile method provides a new pathway for controlling the surface properties based on an asymmetric amphiphilic zwitterionic perylene bisimide.     

Spontaneous Stepwise Self‐Assembly of a Polyoxometalate–Organic Hybrid into Catalytically Active One‐Dimensional Anisotropic Structures

An inorganic–organic hybrid surfactant with a hexavanadate cluster as the polar head group was designed and observed to assemble into micelle structures, which further spontaneously coagulate into a 1D anisotropic structure in aqueous solutions. Such a hierarchical self‐assembly process is driven by the cooperation of varied noncovalent interactions, including hydrophobic, electrostatic, and hydrogen‐bonding interactions. The hydrophobic interaction drives the quick formation of the micelle structure; electrostatic interactions involving counterions leads to the further coagulation of the micelles into larger assemblies. This process is similar to the crystallization process, but the specific counterions and the directional hydrogen bonding lead to the 1D growth of the final assemblies. Since most of the hexavanadates are exposed to the surface, the 1D assembly with nanoscale thickness is a highly efficient heterogeneous catalyst for the oxidation of organic sulfides with appreciable recyclability.     

Modification of the Solution Behavior of Pd12L24 Metal–Organic Nanocages via PEGylation

The dilute solutions behaviors of Pd₁₂L₂₄ metal–organic nanocage and its two PEGylated derivatives are explored. The basic nanocages can self‐assemble into vesicle‐like blackberry structures in polar solvents via counterion‐mediated attraction, whereas the PEGylated nanocages always stay as discrete ions under the same conditions, demonstrating that the PEGylation can improve the stability of the single nanocages. In addition, larger nanocages are found to self‐assemble in less polar solvents.     

Solvent‐Polarity‐Tuned Morphology and Inversion of Supramolecular Chirality in a Self‐Assembled Pyridylpyrazole‐Linked Glutamide Derivative: Nanofibers,Nanotwists, Nanotubes,and Microtubes

The self‐assembly of a low‐molecular‐weight organogelator into various hierarchical structures has been achieved for a pyridylpyrazole linked L ‐glutamide amphiphile in different solvents. Upon gel formation, supramolecular chirality was observed, which exhibited an obvious dependence on the polarity of the solvent. Positive supramolecular chirality was obtained in nonpolar solvents, whereas it was inverted into negative supramolecular chirality in polar solvents. Moreover, the gelator molecules self‐assembled into a diverse array of nanostructures over a wide scale range, from nanofibers to nanotubes and microtubes, depending on the solvent polarity. Such morphological changes could even occur for the xerogels in the solvent vapors. We found that the interactions between the pyridylpyrazole headgroups and the solvents could subtly change the stacking of the molecules and, hence, their self‐assembled nanostructures. This work exemplifies that organic solvents can significantly involve the gelation, as well as tune the structure and properties, of a gel.     

Light‐Controlled Formation of Vesicles and Supramolecular Organogels by a Cholesterol‐Bearing Amphiphilic Molecular Switch

A new responsive material composed of an amphiphilic light‐switchable dithienylethene unit functionalized with a hydrophobic cholesterol unit and a hydrophilic poly(ethylene glycol)‐modified pyridinium group has been designed. This unique single‐molecule system shows responsive light‐switchable self‐assembly in both water and organic solvents. Light‐triggered reversible vesicle formation in aqueous solutions is reported. The molecule shows a different behavior in apolar aromatic solvents, in which light‐controlled formation of organogel fibers is observed. The light‐triggered aggregation behavior of this molecule demonstrates that control of a supramolecular structure with light can be achieved in both aqueous and organic media and that this ability can be present in a single molecule. This opens the way toward the effective development of new strategies in soft nanotechnology for applications in controlled chemical release systems.     

Protein‐Framed Multi‐Porphyrin Micelles for a Hybrid Natural–Artificial Light‐Harvesting Nanosystem

A micelle‐like hybrid natural–artificial light‐harvesting nanosystem was prepared through protein‐framed electrostatic self‐assembly of phycocyanin and a four‐armed porphyrin star polymer. The nanosystem has a special structure of pomegranate‐like unimolecular micelle aggregate with one phycocyanin acceptor in the center and multiple porphyrin donors in the shell. It can inhibit donor self‐quenching effectively and display efficient transfer of excitation energy (about 80.1 %) in water. Furthermore, the number of donors contributing to a single acceptor could reach as high as about 179 in this nanosystem.     

Theoretical investigation of solvent effects on tautomeric equilibrium of 2‐diazo‐4,6‐dinitrophenol

The density functional theory has been used to study the tautomeric equilibrium of 2‐diazo‐4,6‐dinitrophenol(DDNP) in the gas phase and in 14 solvents at the B3LYP/6‐31G* level. The solvent effects on the tautomeric equilibria were investigated by the self‐consistent reaction field theory (SCRF) based on conductor polarized continuum model (CPCM) in apolar and polar solvents and by the hybrid continuum‐discrete model in protic solvent, respectively. Solvent effects on the computed molecular properties, such as molecular geometries, dipole moments, E_LUMO, E_HOMO, total energies for DDNP tautomers and transition state, tautomerization energies and solvation energies have been found to be evident. The tautomeric equilibrium of DDNP is solvent‐dependent to a certain extent. The tautomer I (cyclic azoxy form) is preferred in the gas phase, while in nonpolar solvents tautomer I and II (quinold form) exist in comparable amounts, and in highly polar solvents, the tautomeric equilibrium is shifted in favor of the more polar tautomer II . © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Water‐Soluble and pH‐Responsive Polymeric Nanotubes from Cyclic Peptide Templates

Water‐soluble organic nanotubes were prepared by convergently conjugating polymers of hydroxyethyl acrylate (HEA) and acrylic acid (AA) to self‐assembling cyclic octapeptides of alternating D and L chirality. The structure of the self‐assembled tubes was characterised in a number of polar solvents, and notably water, by using light scattering, TEM and small angle neutron scattering (SANS) techniques. In addition, the self‐assembly into tubes could be controlled by exploiting the pH responsiveness of acrylic acid polymers.     

Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.     

Ultrasound‐Driven Secondary Self‐Assembly of Amphiphilic β‐Cyclodextrin Dimers

The controlled secondary self‐assembly of amphiphilic molecules in solution is theoretically and practically significant in amphiphilic molecular applications. An amphiphilic β‐cyclodextrin (β‐CD) dimer, namely LA‐(CD)₂, has been synthesized, wherein one lithocholic acid (LA) unit is hydrophobic and two β‐CD units are hydrophilic. In an aqueous solution at room temperature, LA‐(CD)₂ self‐assembles into spherical micelles without ultrasonication. The primary micelles dissociates and then secondarily form self‐assemblies with branched structures under ultrasonication. The branched aggregates revert to primary micelles at high temperature. The ultrasound‐driven secondary self‐assembly is confirmed by transmission electron microscopy, dynamic light scattering, ¹H NMR spectroscopy, and Cu²⁺‐responsive experiments. Furthermore, 2D NOESY NMR and UV/Vis spectroscopy results indicate that the formation of the primary micelles is driven by hydrophilic–hydrophobic interactions, whereas host–guest interactions promote the formation of the secondary assemblies. Additionally, ultrasonication is shown to be able to effectively destroy the primary hydrophilic–hydrophobic balances while enhancing the host–guest interaction between the LA and β‐CD moieties at room temperature.     

Exfoliation of Graphite into Graphene in Polar Solvents Mediated by Amphiphilic Hexa‐peri‐hexabenzocoronene

A water‐soluble surfactant consisting of hexa‐peri‐hexabenzocoronene (HBC) as hydrophobic aromatic core and hydrophilic carboxy substituents was synthesized. It exhibited a self‐assembled nanofiber structure in the solid state. Profiting from the π interactions between the large aromatic core of HBC and graphene, the surfactant mediated the exfoliation of graphite into graphene in polar solvents, which was further stabilized by the bulky hydrophilic carboxylic groups. A graphene dispersion with a concentration as high as 1.1 mg L^?1 containing 2–6 multilayer nanosheets was obtained. The lateral size of the graphene sheets was in the range of 100–500 nm based on atomic force microscope (AFM) and transmission electron microscope (TEM) measurements.     

Amphiphilic Peptide–Polymer Conjugates with Side‐Conjugation

Polymers conjugated to the exterior of a protein mediate its interactions with surroundings, enhance its processability and can be used to direct its macroscopic assemblies. Most studies to date have focused on peptide–polymer conjugates based on hydrophilic polymers. Engineering amphiphilicity into protein motifs by covalently linking hydrophobic polymers has the potential to interface peptides and proteins with synthetic polymers, organic solvents, and lipids to fabricate functional hybrid materials. Here, we synthesized amphiphilic peptide–polymer conjugates in which a hydrophobic polymer is conjugated to the exterior of a heme‐binding four‐helix bundle and systematically investigated the effects of the hydrophobicity of the conjugated polymer on the peptide structure and the integrity of the heme‐binding pocket. In aqueous solution with surfactants present, the side‐conjugated hydrophobic polymers unfold peptides and may induce an α‐helix to β‐sheet conformational transition. These effects decrease as the polymer becomes less hydrophobic and directly correlate with the polymer hydrophobicity. Upon adding organic solvent to solubilize the hydrophobic polymers, however, the deleterious effects of hydrophobic polymers on the peptide structures can be eliminated. Present studies demonstrate that protein structure is sensitive to the local environment. It is feasible to dissolve amphiphilic peptide–polymer conjugates in organic solvents to enhance their solution processability while maintaining the protein structures.

     

Pyrene‐Based Fluorescent Ambidextrous Gelators: Scaffolds for Mechanically Robust SWNT–Gel Nanocomposites

With the rapid progress in the development of supramolecular soft materials, examples of low‐molecular‐weight gelators (LMWGs) with the ability to immobilise both water and organic solvents by the same structural scaffold are very limited. In this paper, we report the development of pyrene‐containing peptide‐based ambidextrous gelators (AGs) with the ability to efficiently gelate both organic and aqueous solvents. The organo‐ and hydrogelation efficiencies of these gelators are in the range 0.7–1.1 % w/v in various organic solvents and 0.5–5 % w/v in water at certain acidic pH values (pH 2.0–4.0). Moreover, for the first time, AGs have been utilised to prepare single‐walled carbon‐nanotube (SWNT)‐included soft nanocomposites in both hydro‐ and organogel matrices. The influence of different non‐covalent interactions such as hydrogen bonding, hydrophobic, π–π and van der Waals interactions in self‐assembled gelation has been studied in detail by circular dichroism, FTIR, variable‐temperature NMR, 2D NOESY and luminescence spectroscopy. Interestingly, the presence of the pyrene moiety in the structure rendered these AGs intrinsically fluorescent, which was quenched upon successful integration of the SWNTs within the gel. The prepared hydro‐ and organogels along with their SWNT‐integrated nanocomposites are thermoreversible in nature. The supramolecular morphologies of the dried gels and SWNT–gel nanocomposites have been studied by transmission electron microscopy, fluorescence microscopy and polarising optical microscopy, which confirmed the presence of three‐dimensional self‐assembled fibrillar networks (SAFINs) as well as the integrated SWNTs. Importantly, rheological studies revealed that the inclusion of SWNTs within the ambidextrous gels improved the mechanical rigidity of the resulting soft nanocomposites up to 3.8‐fold relative to the native gels.     

Donor–acceptor copolymers for red‐ and near‐infrared‐emitting polymer light‐emitting diodes

We report a comparative study of two organic soluble, vinylene‐based, alternating donor–acceptor copolymers with 1,4‐(2,5‐dihexadecyloxyphenylene) as the donor; the acceptor is either a 2,5‐linked pyridine or a 5,8‐linked 2,3‐diphenylpyrido[3,4‐b]pyrazine. The polymers are synthesized via a Heck coupling methodology from a dihalo monomer and a divinyl monomer to yield number‐average molecular weights of 16,000 g/mol for the pyridine polymer (PPyrPV) and 6500 g/mol for the pyridopyrazine polymer (PPyrPyrPV), with high solubility in common chlorinated solvents and lower solubility in less polar solvents (e.g., tetrahydrofuran). Thin‐film measurements show band gaps of 2.2 and 1.8 eV for PPyrPV and PPyrPyrPV, respectively. Both polymers exhibit photoluminescence in solution and in the solid state and exhibit electroluminescence when incorporated into light‐emitting diodes. In this case, a broad red emission centered at 690 nm for PPyrPV and a near‐infrared emission centered at 800 nm for PPyrPyrPV have been observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1417–1431, 2005     

Solvent‐Catalyzed Ring–Chain–Ring Tautomerization in Axially Chiral Compounds

The mechanism of ring–chain–ring tautomerization and the prominent effect of the solvent environment have been computationally investigated in an effort to explain the enantiomeric interconversion observed in 2‐oxazolidinone derivatives, heterocyclic analogues of biphenyl atropisomers, which were isolated as single stable enantiomers and have the potential to be used as axially chiral catalysts. This study has shed light on the identity of the intermediate species involved in the ring–chain–ring tautomerization process as well as the catalytic effect of polar protic solvents. These mechanistic details will prove very useful in predicting and understanding ring–chain tautomeric equilibria in similar heterocyclic systems and will further enable experimentalists to devise appropriate experimental conditions in which axially chiral catalysts remain stable as single enantiomers.     

Micelles and reverse micelles with a photo and thermo double‐responsive block copolymer

A novel photo and thermo double‐responsive block copolymer was developed to fabricate micelles and reverse micelles in aqueous solution. The block copolymer was synthesized by ATRP block copolymerization of a spiropyran‐ containing methacrylate (SPMA) with di(ethylene glycol) methyl ether methacrylate (DEGMMA). By facile control of the photo irradiation and solution temperature, PSPMA‐core and PDEGMMA‐core micelles can be obtained, respectively. The thermo‐ and photo‐responsive micelles were used as smart polymeric nanocarriers for controlled encapsulation, triggered release, and re‐encapsulation of model drug coumarin 102. The double‐responsive self‐assembly and disassembly were tracked by dynamic light scattering, transmission electron microscopy, and fluorescence spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2855–2861, 2010