二维共价有机框架材料中引入含氮配体用于络合金属催化

共价有机骨架材料(COF)也被称为“有机分子筛”,具有孔道结构开放有序、易于进行化学修饰改性、化学/热稳定性好等优点,是一种新型的有机聚合物多孔材料.近年来,以COF材料为催化剂载体负载金属化合物用于制备多相反应催化剂已经成为材料领域研究的热点,表现出高活性和高选择性.但是到目前为止,仍未找到简单有效地控制骨架中金属负载量和分散性的方法,这已成为该领域一个具有挑战性的课题.
　　本文以2,2’-联吡啶-5,5’-二甲醛作为其中一个结构基元,成功把联吡啶配体引入到二维材料中.除此之外,由于COF是以亚胺键联接构筑形成的,因此框架中同时存在联吡啶和亚胺键两种含氮配体.我们通过红外光谱、结构模拟、元素分析、热失重分析、透射电镜(TEM)、X-射线光电子能谱、电感耦合等离子体色谱等手段详细表征了所制备的二维共价有机框架材料对醋酸钯(Pd(OAc)2)分子的络合负载行为.
　　研究发现,联吡啶和亚胺键均可参与配位Pd(OAc)2,与亚胺键配位的Pd(OAc)2分布于框架的层与层之间,而与联吡啶配位的则部分占据了框架的孔道,导致孔径减小.另外,由于框架中的联吡啶配体含量可通过加入2,2’-联吡啶-5,5’-二甲醛含量的变化实现线性调控,因此也可调节与其配位的Pd(OAc)2含量,其负载量可控制在14.3–18.7 wt%,是目前已报道的二维COF中的最高值;另外, COF材料中调控金属负载量尚未见报道. TEM结果显示,负载在框架中的催化剂分子没有发生团聚,框架的孔道仍处于开放状态,因而反应底物可以自由地出入一维孔道并与络合的催化剂充分接触.另外,由于催化剂在框架内部可以达到分子级别的分散,而且其负载量和负载位置都易于控制,因而对有机反应表现出了优异的催化性能.
　　我们尝试了以不同Pd负载量的COF为多相催化剂催化Heck反应.结果发现, Pd(II)@75%BPy COF(Pd负载量为最高值18.7 wt%)的催化活性最高,对不同底物均表现出优异的催化性能,产率达73–96%,反应速率遵循一级动力学曲线.且催化剂经多次循环利用仍能保持高活性,框架的有序结构也未被破坏,因此该材料有望用于各种类型优异的多相反应催化剂.     

Ordered Porous Nitrogen‐Doped Carbon Matrix with Atomically Dispersed Cobalt Sites as an Efficient Catalyst for Dehydrogenation and Transfer Hydrogenation of N‐Heterocycles

Single‐atom catalysts (SACs) have been explored widely as potential substitutes for homogeneous catalysts. Isolated cobalt single‐atom sites were stabilized on an ordered porous nitrogen‐doped carbon matrix (ISAS‐Co/OPNC). ISAS‐Co/OPNC is a highly efficient catalyst for acceptorless dehydrogenation of N‐heterocycles to release H₂. ISAS‐Co/OPNC also exhibits excellent catalytic activity for the reverse transfer hydrogenation (or hydrogenation) of N‐heterocycles to store H₂, using formic acid or external hydrogen as a hydrogen source. The catalytic performance of ISAS‐Co/OPNC in both reactions surpasses previously reported homogeneous and heterogeneous precious‐metal catalysts. The reaction mechanisms are systematically investigated using first‐principles calculations and it is suggested that the Eley–Rideal mechanism is dominant.     

Synthesis of Supported Bimetal Catalysts using Galvanic Deposition Method

Supported bimetallic catalysts have been studied because of their enhanced catalytic properties due to metal‐metal interactions compared with monometallic catalysts. We focused on galvanic deposition (GD) as a bimetallization method, which achieves well‐defined metal‐metal interfaces by exchanging heterogeneous metals with different ionisation tendencies. We have developed Ni@Ag/SiO₂ catalysts for CO oxidation, Co@Ru/Al₂O₃ catalysts for automotive three‐way reactions and Pd−Co/Al₂O₃ catalysts for methane combustion by using the GD method. In all cases, the catalysts prepared by the GD method showed higher catalytic activity than the corresponding monometallic and bimetallic catalysts prepared by the conventional co‐impregnation method. The GD method provides contact between noble and base metals to improve the electronic state, surface structure and reducibility of noble metals.     

Conjugated Microporous Polymers for Heterogeneous Catalysis

Conjugated microporous polymers (CMPs) are a class of crosslinked polymers that combine permanent micropores with π‐conjugated skeletons and possess three‐dimensional (3D) networks. Compared with conventional materials such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs), CMPs usually have superior chemical and thermal stability. CMPs have made significant progress in heterogeneous catalysis in the past seven years. With a bottom‐up strategy, catalytic moieties can be directly introduced into in the framework to produce heterogeneous CMP catalysts. Higher activity, stability, and selectivity can be obtained with heterogeneous CMP catalysts in comparison with their homogeneous analogs. In addition, CMP catalysts can be easily isolated and recycled. In this review, we focus on CMPs as an intriguing platform for developing various highly efficient and recyclable heterogeneous catalysts in organic reactions. The design, synthesis, and structure of these CMP catalysts are also discussed in this focus review.     

Development of dipyridine‐based coordinative polymers for reusable heterogeneous catalysts

Poly(di(pyridin‐2‐yl)methyl acrylate) (PDPyMA), which was obtained by the free radical polymerization of designed coordinative monomer of di(pyridin‐2‐yl)methyl acrylate, is able to coordinate with various metal ions to form heterogeneous catalysts for diverse catalytic reactions. The Pd and Cu complexes supported by PDPyMA were developed for the heterogeneous Suzuki‐Miyaura reaction and Friedel‐Crafts alkylation, respectively. The PDPyMA‐based catalysts showed no significant decline of reactivity after five times recycling. However, the hydrolysis of the PDPyMA backbone under alkaline conditions limited the catalytic efficiency of this heterogeneous catalyst so that the coordinative monomer was redesigned as 1,1‐di(pyridine‐2‐yl)‐2‐(4‐vinylphenyl)ethan‐1‐ol and then 2,2′‐(1‐methoxy‐2‐(4‐vinylphenyl)ethane‐1,1‐diyl)dipyridine (MVPhDPy). With copolymerization of N‐isopropyl acrylamide (NIPAM), the efficiency of polymer‐based heterogeneous catalysts could be further raised, demonstrated by the increased turn over number in the Suzuki‐Miyaura reaction, which approached 5,260 by using the catalyst formed from poly(MVPhDPy‐co‐NIPAM) and Pd(OAc)₂. poly(MVPhDPy‐co‐NIPAM) copolymer, therefore, could be a versatile platform to support different metal ions for various heterogeneous catalytic reactions.     

Recent Advances in Covalent Organic Frameworks for Catalysis

Covalent organic frameworks (COFs) as an emerging type of crystalline porous materials, have obtained considerable attention recently. They have exhibited diverse structure and attractive performance in various catalytic reactions. It is highly expected to have a systematic and comprehensive review summing up COFs‐derived catalysts in homogeneous and heterogeneous catalysis, which is favorable to the judicious design of an efficient catalyst for targeted reaction. Herein, we focus on summarizing recent and significant developments in COFs materials, with an emphasis on both the synthetic strategies and targeted functionalization, and categorize it in accordance with the different types of catalytic reactions. Their potential catalysis applications are reviewed thoroughly. Moreover, a personal view about the future development of COFs catalysts with respect to the large‐scale production is also discussed.     

Understanding the Origin of Highly Selective CO2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO₂ electroreduction (CO₂R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni?N bonding and correlating CO₂ reduction (CO₂R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO₂R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.     

Docking Site Modulation of Isostructural Covalent Organic Frameworks for CO2 Fixation

Three isostructural covalent organic frameworks (COFs) with either methoxyl, hydroxyl, or both groups on the channel wall, are synthesized and served as metal-free heterogeneous catalysts for chemical fixation of CO₂. Among them, the COF decorated with both hydroxyl and methoxyl groups named OMe-OH-TPBP-COF exhibits the highest catalytic activity and efficiency for CO₂ cycloaddition under mild conditions.     

Electron transfer mechanism in olefin polymerization

Polymerization of olefins mediated by transition metal derivatives (Ziegler–Natta polymerization) is one of the most scientifically and industrially important processes of molecular conversion. Electron transfer mechanism could play a significant role in both heterogeneous and homogeneous catalysts. The catalytic activity strongly depends on the presence of two metallocene ligands attached to the transition metal (more commonly zirconium) which grants the valence form of zirconium in complexes of the type Cp₂ZrX₂(X=Cl or CH₃) followed by the formation of the (Cp₂ZrX)⁺ cation under the effect of a Lewis acid. On the other hand, Ti complexes with only one metallocene ligand give the syndiospecific polymerization of styrene, where the phenyl group appears to act as electron donor for the transition metal. The remarkable electronic effect of the metallocene groups in determining catalytic activity is demonstrated by the study of substituted metallocene ligands as well as other ligands around the metal. These effects cannot be, however, completely separated from steric effects which seem to be responsible for the impressive and versatile stereochemical control determined by symmetry properties of the transition metal complex.     

Controllable Conversion of CO2 on Non‐Metallic Gold Clusters

Gold nanoparticles in metallic or plasmonic state have been widely used to catalyze homogeneous and heterogeneous reactions. However, the catalytic behavior of gold catalysts in non‐metallic or excitonic state remain elusive. Atomically precise Au_n clusters (n=number of gold atoms) bridge the gap between non‐metallic and metallic catalysts and offer new opportunities for unveiling the hidden properties of gold catalysts in the metallic, transition regime, and non‐metallic states. Here, we report the controllable conversion of CO₂ over three non‐metallic Au_n clusters, including Au₉, Au₁₁, and Au₃₆, towards different target products: methane produced on Au₉, ethanol on Au₁₁, and formic acid on Au₃₆. Structural information encoded in the non‐metallic clusters permits a precise correlation of atomic structure with catalytic properties and hence, provides molecular‐level insight into distinct reaction channels of CO₂ hydrogenation over the three non‐metallic Au catalysts.     

Self‐Supporting Metal–Organic Layers as Single‐Site Solid Catalysts

Metal–organic layers (MOLs) represent an emerging class of tunable and functionalizable two‐dimensional materials. In this work, the scalable solvothermal synthesis of self‐supporting MOLs composed of [Hf₆O₄(OH)₄(HCO₂)₆] secondary building units (SBUs) and benzene‐1,3,5‐tribenzoate (BTB) bridging ligands is reported. The MOL structures were directly imaged by TEM and AFM, and doped with 4′‐(4‐benzoate)‐(2,2′,2′′‐terpyridine)‐5,5′′‐dicarboxylate (TPY) before being coordinated with iron centers to afford highly active and reusable single‐site solid catalysts for the hydrosilylation of terminal olefins. MOL‐based heterogeneous catalysts are free from the diffusional constraints placed on all known porous solid catalysts, including metal–organic frameworks. This work uncovers an entirely new strategy for designing single‐site solid catalysts and opens the door to a new class of two‐dimensional coordination materials with molecular functionalities.     

Chemical synthesis of biodegradable aliphatic polyesters and polycarbonates catalyzed by novel versatile aluminum metal complexes bearing salen ligands

Two novel aluminum metal complexes ( 2 and 3 ) bearing salen ligands were in situ prepared from trimethyl aluminum (AlMe₃), methanol, and (R,R)‐N,N′‐bis(salicylidene)‐1,2‐diaminocyclohexane with original synthetic strategies, and a preliminarily resoluted (R,R)‐1,2‐diaminocyclohexane was applied as a synthetic precursor. By means of Fourier transform infrared spectrometry, NMR spectrometry, mass spectrometry, and single‐crystal X‐ray diffractometry, 2 and 3 were revealed to be distinct molecular structures with corresponding yields of 85 and 10%, respectively. Further studies via ²⁷Al NMR techniques and single‐crystal X‐ray diffraction indicated that dimeric metal complex 3 appeared in the six‐coordinated state, whereas there was a dynamic equilibrium transition between the five‐ and six‐coordinated states for metal complex 2 in a CDCl₃ solution. The more stable dimeric metal complex ( 3 ) exhibited two inequivalent aluminum metal centers coordinated to nitrogen atoms attributed to two different salen ligands, and this was different from the reported salen aluminum complex structures. Furthermore, 2 and 3 were employed as candidate catalysts for the ring‐opening polymerization (ROP) of some important biodegradable aliphatic polyesters and polycarbonates, including poly(?‐caprolactone) (PCL), poly(δ‐valerolactone), poly(trimethylene carbonate), and poly(2,2‐dimethyl trimethylene carbonate). The synthetic results indicated that both metal complexes efficiently catalyzed ROP at 100 °C in an anisole solution, and 3 showed much better controlled characteristics of ROP than 2 . Very narrow molecular weight distributions close to 1.21 for PCL were detected with 3 as the ROP catalyst. In addition, a catalytic mechanism study confirmed that ROP catalyzed by these metal complexes was in good agreement with the commonly accepted coordination polymerization reported for aluminum triiso [Al(OⁱPr)₃] and stannous octanoate [Sn(Oct)₂]. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 373–384, 2005     

Template‐Induced Diverse Metal–Organic Materials as Catalysts for the Tandem Acylation–Nazarov Cyclization

In our continuing quest to develop a metal–organic framework (MOF)‐catalyzed tandem pyrrole acylation–Nazarov cyclization reaction with α,β‐unsaturated carboxylic acids for the synthesis of cyclopentenone[b]pyrroles, which are key intermediates in the synthesis of natural product (±)‐roseophilin, a series of template‐induced Zn‐based ( 1–3 ) metal‐organic frameworks (MOFs) have been solvothermally synthesized and characterized. Structural conversions from non‐porous MOF 1 to porous MOF 2 , and back to non‐porous MOF 3 arising from the different concentrations of template guest have been observed. The anion–π interactions between the template guests and ligands could affect the configuration of ligands and further tailor the frameworks of 1–3 . Futhermore, MOFs 1–3 have shown to be effective heterogeneous catalysts for the tandem acylation–Nazarov cyclization reaction. In particular, the unique structural features of 2 , including accessible catalytic sites and suitable channel size and shape, endow 2 with all of the desired features for the MOF‐catalyzed tandem acylation–Nazarov cyclization reaction, including heterogeneous catalyst, high catalytic activity, robustness, and excellent selectivity. A plausible mechanism for the catalytic reaction has been proposed and the structure–reactivity relationship has been further clarified. Making use of 2 as a heterogeneous catalyst for the reaction could greatly increase the yield of total synthesis of (±)‐roseophilin.     

One-Dimensional Covalent Organic Frameworks for the 2e− Oxygen Reduction Reaction

Two-dimensional covalent organic frameworks (2D COFs) are often employed for electrocatalytic systems because of their structural diversity. However, the efficiency of atom utilization is still in need of improvement, because the catalytic centers are located in the basal layers and it is difficult for the electrolytes to access them. Herein, we demonstrate the use of 1D COFs for the 2e⁻ oxygen reduction reaction (ORR). The use of different four-connectivity blocks resulted in the prepared 1D COFs displaying good crystallinity, high surface areas, and excellent chemical stability. The more exposed catalytic sites resulted in the 1D COFs showing large electrochemically active surface areas, 4.8-fold of that of a control 2D COF, and thus enabled catalysis of the ORR with a higher H₂O₂ selectivity of 85.8 % and activity, with a TOF value of 0.051 s⁻¹ at 0.2 V, than a 2D COF (72.9 % and 0.032 s⁻¹). This work paves the way for the development of COFs with low dimensions for electrocatalysis.     

The AZARYPHOS Family of Ligands for Ambifunctional Catalysis: Syntheses and Use in Ruthenium‐Catalyzed anti‐Markovnikov Hydration of Terminal Alkynes

The family of AZARYPHOS (aza–aryl–phosphane) phosphane ligands, containing a phosphine unit and sterically shielded nitrogen lone pairs in the ligand periphery, is introduced as a tool for developing ambifunctional catalysis by the metal center and nitrogen lone pairs in the ligand sphere. General synthetic strategies have been developed to synthesize over 25 examples of structurally diverse (6‐aryl‐2‐pyridyl)phosphanes (ARPYPHOS), (6‐alkyl‐2‐pyridyl)phosphanes (ALPYPHOS), 4,6‐disubsituted 1,3‐diazin‐2‐ylphosphanes or 1,3,5‐triazin‐2‐ylphosphanes, quinazolinylphosphanes, quinolinylphosphanes, and others. The scalable syntheses proceed in a few steps. The incorporation of AZARYPHOS ligands ( L ) into complexes [RuCp( L )₂(MeCN)][PF₆] (Cp=cyclopentadienyl) gives catalysts for the anti‐Markovnikov hydration of terminal alkynes of the highest known activities. Electronic and steric ligand effects modulate the reaction kinetics over a range of two orders of magnitude. These results highlight the importance of using structurally diverse ligand families in the process of developing cooperative ambifunctional catalysis by a metal and its ligand.     

Efficient Cluster‐Based Catalysts for Asymmetric Hydrogenation of α‐Unsaturated Carboxylic Acids

The new clusters [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)], [H₄Ru₄(CO)₁₀(1,1‐P‐P)] and [H₄Ru₄(CO)₁₁(P‐P)] (P‐P=chiral diphosphine of the ferrocene‐based Josiphos or Walphos ligand families) have been synthesised and characterised. The crystal and molecular structures of eleven clusters reveal that the coordination modes of the diphosphine in the [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)] clusters are different for the Josiphos and the Walphos ligands. The Josiphos ligands bridge a metal–metal bond of the ruthenium tetrahedron in the “conventional” manner, that is, with both phosphine moieties coordinated in equatorial positions relative to a triangular face of the tetrahedron, whereas the phosphine moieties of the Walphos ligands coordinate in one axial and one equatorial position. The differences in the ligand size and the coordination mode between the two types of ligands appear to be reflected in a relative propensity for isomerisation; in solution, the [H₄Ru₄(CO)₁₀(1,1‐Walphos)] clusters isomerise to the corresponding [H₄Ru₄(CO)₁₀(μ‐1,2‐Walphos)] clusters, whereas the Josiphos‐containing clusters show no tendency to isomerisation in solution. The clusters have been tested as catalysts for asymmetric hydrogenation of four prochiral α‐unsaturated carboxylic acids and the prochiral methyl ester (E)‐methyl 2‐methylbut‐2‐enoate. High conversion rates (>94 %) and selectivities of product formation were observed for almost all catalysts/catalyst precursors. The observed enantioselectivities were low or nonexistent for the Josiphos‐containing clusters and catalyst (cluster) recovery was low, suggesting that cluster fragmentation takes place. On the other hand, excellent conversion rates (99–100 %), product selectivities (99–100 % in most cases) and good enantioselectivities, reaching 90 % enantiomeric excess (ee) in certain cases, were observed for the Walphos‐containing clusters, and the clusters could be recovered in good yield after completed catalysis. Results from high‐pressure NMR and IR studies, catalyst poisoning tests and comparison of catalytic properties of two [H₄Ru₄(CO)₁₀(μ‐1,2‐P‐P)] clusters (P‐P=Walphos ligands) with the analogous mononuclear catalysts [Ru(P‐P)(carboxylato)₂] suggest that these clusters may be the active catalytic species, or direct precursors of an active catalytic cluster species.     

One‐Pot Cooperation of Single‐Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization‐Hydrosilylation Process

Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru₁/CeO₂ and Rh₁/CeO₂ SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.     

3D Microporous Base‐Functionalized Covalent Organic Frameworks for Size‐Selective Catalysis

The design and synthesis of 3D covalent organic frameworks (COFs) have been considered a challenge, and the demonstrated applications of 3D COFs have so far been limited to gas adsorption. Herein we describe the design and synthesis of two new 3D microporous base‐functionalized COFs, termed BF‐COF‐1 and BF‐COF‐2, by the use of a tetrahedral alkyl amine, 1,3,5,7‐tetraaminoadamantane (TAA), combined with 1,3,5‐triformylbenzene (TFB) or triformylphloroglucinol (TFP). As catalysts, both BF‐COFs showed remarkable conversion (96 % for BF‐COF‐1 and 98 % for BF‐COF‐2), high size selectivity, and good recyclability in base‐catalyzed Knoevenagel condensation reactions. This study suggests that porous functionalized 3D COFs could be a promising new class of shape‐selective catalysts.     

配合物(ArO)2Yb(NPh2)2K(THF)4(Ar=C6H2-t-Bu3-2,4,6)的合成、分子结构和催化行为

Reaction of anhydrous YbC13 with 2 equiv, of sodium 2,4,6-tri-tert-butylphenoxide (ArONa, Ar=C6H2-t-Bu3-2,4,6) and 2 equiv, of potassium diphenyl amide in THF afforded the first bis(aryloxo) amido-lanthanide complex of (ArO)2Yb(NPh2)2K(THF)4 (1). In 1, the ytterbium and potassium were bridged via diphenyl amido ligands.The ytterbium metal center was coordinated to two oxygen atoms of aryloxide ligands and two nitrogen atoms of diphenyl amido ligands in a conventional distorted tetrahedral fashion, while the potassium interacted in η^2-fashion with two phenyl rings of the diphenyl amido ligands besides four THF molecules. 1 displayed moderate catalytic activities for the polymerization of methyl methacrylate and acrylonitrile.