Synthesis of Nanoporous Carbon–Cobalt‐Oxide Hybrid Electrocatalysts by Thermal Conversion of Metal–Organic Frameworks

Nanoporous carbon–cobalt‐oxide hybrid materials are prepared by a simple, two‐step, thermal conversion of a cobalt‐based metal–organic framework (zeolitic imidazolate framework‐9, ZIF‐9). ZIF‐9 is carbonized in an inert atmosphere to form nanoporous carbon–metallic‐cobalt materials, followed by the subsequent thermal oxidation in air, yielding nanoporous carbon–cobalt‐oxide hybrids. The resulting hybrid materials are evaluated as electrocatalysts for the oxygen‐reduction reaction (ORR) and the oxygen‐evolution reaction (OER) in a KOH electrolyte solution. The hybrid materials exhibit similar catalytic activity in the ORR to the benchmark, commercial, Pt/carbon black catalyst, and show better catalytic activity for the OER than the Pt‐based catalyst.     

“Metal‐Free” Catalytic Oxygen Reduction Reaction on Heteroatom‐Doped Graphene is Caused by Trace Metal Impurities

The oxygen reduction reaction (ORR) is of high industrial importance. There is a large body of literature showing that metal‐based catalytic nanoparticles (e.g. Co, Mn, Fe or hybrid Mn/Co‐based nanoparticles) supported on graphene act as efficient catalysts for the ORR. A significant research effort is also directed to the so‐called “metal‐free” oxygen reduction reaction on heteroatom‐doped graphene surfaces. While such studies of the ORR on nonmetallic heteroatom‐doped graphene are advertised as “metal‐free” there is typically no sufficient effort to characterize the doped materials to verify that they are indeed free of any trace metal. Here we argue that the claimed “metal‐free” electrocatalysis of the oxygen reduction reaction on heteroatom‐doped graphene is caused by metallic impurities present within the graphene materials.     

The Direct Electron Transfer of Iron‐containing Metal Organic Frameworks (Mil‐100) and Its Catalysis for the Oxygen Reduction Reaction in Room‐Temperature Alkaline Media on a Glass Carbon Electrode

The most common electrocatalysts for the oxygen reduction reaction (ORR) are platinum‐based ones. This work demonstrates the performance of iron‐containing metal organic frameworks (MOFs) as non‐platinum‐based nano‐electrocatalysts for ORR in an alkaline medium. As a new non‐platinum catalyst to achieve the active sites for the ORR, Mil‐100 (Fe) nanoparticles were used in aqueous KOH by the rotating‐disk electrode method. The main objectives of this study are the investigations on the electron transfer number (n ), Tafel slope, and catalytic performance. The particles size of the obtained powders is in the nanoscale range (approximately 25 nm). The electron transfer number for the ORR on the surface of iron‐containing catalyst is approximately 4, and the Tafel slope of diffusion‐corrected kinetic current density is ~50.7 mV per decade at low overpotential. This work might extend a new non‐precious‐metal catalyst structure for ORR for use in low‐temperature fuel cells.     

聚对苯二胺和炭黑复合物作为高效的氧还原催化剂及其稳定性研究

近年来,氮掺杂的碳材料作为碱性氧还原催化剂得到了研究者的广泛关注.掺杂的 N原子会影响 C原子的自旋密度和电荷分布,导致碳材料表面产生“活性位点”,因此掺氮碳材料具有优秀的氧还原活性,这已经在理论计算和实验中得到了验证.我们通过调节聚对苯二胺和碳黑的比例,之后进行热解制备了一系列掺氮碳材料.其中0.88PpPD/CB样品具有最好的氧还原活性,其在 KOH溶液(0.1 mol/L)中的氧还原性能超过了商业碳载铂.通过扫描电子显微镜表征,发现碳球聚集在聚对苯二胺的表面,这主要是因为聚对苯二胺没有进行酸掺杂,因此其水溶性比较差.通过氮气的吸脱附表征,发现聚对苯二胺的比表面积很小,而碳黑样品(BP2000)的比表面积很大.因此,随着聚对苯二胺量的增加,聚对苯二胺/碳黑复合物的比表面积逐渐降低.另外,聚对苯二胺表面几乎都是微孔,而介孔和大孔主要来自于碳黑.研究者认为,“活性位点”主要位于微孔内(聚对苯二胺表面),而介孔和大孔有利于物质的传输.因此,当聚对苯二胺和碳黑的比例合适时,既有大量的“活性位点”暴露,又有足够的介孔和大孔进行物质传输,所以0.88PpPD/CB样品的氧还原活性最高.
　　但是,对于掺氮碳材料来说,一个主要的问题就是稳定性不足.不管是电化学稳定性,还是放置在空气中的稳定性,掺氮碳材料都比不上铂基催化剂,这也阻碍了它们的大规模应用.对于电化学稳定性,很多文章都进行了报道,但是很少有文章报道掺氮碳材料在空气中的稳定性.我们知道,铂基材料之所以具有优异的氧还原活性,是因为铂和氧气的结合能比较合适,既利于氧气吸附,也利于之后氧气分子键的断裂.但是,当铂基材料放置在空气中,氧气的吸附也会发生,而且之后会导致表面氧化层的形成.所以铂基材料需要活化才能达到最好的催化性能.对于掺氮碳材料,放置在空气中会不会发生氧化反应？这对氧还原活性是否有影响？为了研究掺氮碳材料在空气中的稳定性,我们将0.88PpPD/CB样品在空气中放置了一个月,之后再进行电化学测试.旋转圆盘电极测试表明,在空气中放置了一个月后,0.88PpPD/CB样品的氧还原活性降低了,不管是半波电位还是极限电流密度都下降了.之后我们对其进行了 X射线光电子能谱检测,发现在空气中放置了一个月后其氧含量提高了1%(原子分数),而氮含量几乎没有变化.氧含量的提高证实了氧化反应的发生,但不能直接归结于空气中的氧气.为了排除其他因素,如水蒸气、二氧化碳等,当热处理完成,管式炉温度低于100°C时,我们将高纯氮气切换为高纯氧气,一个小时后再取出样品.电化学测试表明,在氧气中暴露了一个小时后,0.88PpPD/CB样品的氧还原活性极大地降低了,而且 X射线光电子能谱表明其氧含量提高了一倍,接近12%.因此,我们证实了氧气会和0.88PpPD/CB样品反应,导致样品的氧还原活性降低.所以,对于未来掺氮碳材料的大规模应用,要考虑其在空气中的稳定性,以及如何避免和氧气接触.     

High‐Rate Oxygen Electroreduction over Graphitic‐N Species Exposed on 3D Hierarchically Porous Nitrogen‐Doped Carbons

Nitrogen‐doped species (NDs) are theoretically accepted as a determinant of the catalytic activity of metal‐free N‐doped carbon (NC) catalysts for oxygen reduction reaction (ORR). However, direct relationships between ND type and ORR activity have been difficult to extract because the complexity of carbon matrix impairs efforts to expose specific NDs. Herein, we demonstrate the fabrication of a 3D hierarchically porous NC catalyst with micro‐, meso‐, and macroporosity in one structure, in which sufficient exposure and availability of inner‐pore catalytic sites can be achieved due to its super‐high surface area (2191 cm² g^?1) and interconnected pore system. More importantly, in‐situ formation of graphitic‐N species (GNs) on the surface of NC stimulated by KOH activation enables us to experimentally reveal the catalytic nature of GNs for ORR, which is of great significance for the design and development of advanced metal‐free NC electrocatalysts.     

Hollow Spheres of Iron Carbide Nanoparticles Encased in Graphitic Layers as Oxygen Reduction Catalysts

Nonprecious metal catalysts for the oxygen reduction reaction are the ultimate materials and the foremost subject for low‐temperature fuel cells. A novel type of catalysts prepared by high‐pressure pyrolysis is reported. The catalyst is featured by hollow spherical morphologies consisting of uniform iron carbide (Fe₃C) nanoparticles encased by graphitic layers, with little surface nitrogen or metallic functionalities. In acidic media the outer graphitic layers stabilize the carbide nanoparticles without depriving them of their catalytic activity towards the oxygen reduction reaction (ORR). As a result the catalyst is highly active and stable in both acid and alkaline electrolytes. The synthetic approach, the carbide‐based catalyst, the structure of the catalysts, and the proposed mechanism open new avenues for the development of ORR catalysts.     

Recent development of efficient electrocatalysts derived from porous organic polymers for oxygen reduction reaction

Porous organic polymers (POPs) have recently emerged as promising candidates for catalyzing oxygen reduction reaction (ORR). Compared to conventional Pt-based ORR catalysts, these newly developed porous materials, including both non-precious metal based catalysts and metal-free catalysts, are more sustainable and cost-effective. Their porous structures and large surface areas facilitate mass and electron transport and boost the ORR kinetics. This mini-review will give a brief summary of recent development of POPs as electrocatalysts for the ORR. Some design principles, different POP structures, key factors for their ORR catalytic performance, and outlook of POP materials will be discussed.     

聚苯胺衍生Fe-N-C催化剂在碱性电解质中对氧还原反应的催化性能

经过热解聚苯胺、碳和FeCl₃的混合物制备的Fe-N-C材料在酸性电解质中对氧还原反应表现出高的催化活性;由于材料中不存在任何贵金属, 因而被认为是一类新型非贵金属氧还原催化剂. 然而这类催化剂在碱性电解质中催化氧还原反应的性能如何尚不清楚. 本文使用旋转圆盘电极技术考察了制备的两个Fe-N-C催化剂在KOH水溶液中催化氧还原反应性能, 发现这两个催化剂表现出比无金属的N掺杂碳材料更高的活性. 与商业Pt/C催化剂相比, 它们催化氧还原反应的起始电势和半波电势分别仅低60和40 mV左右, 计时电流测试表明, 它们比Pt/C催化剂显示出更好的稳定性. 此外, 在这两个Fe-N-C催化剂上的氧还原反应主要遵循四电子途径. 本工作显示, Fe-N-C材料有望用于碱性燃料电池氧还原反应催化剂.     

Earth‐Abundant Nanomaterials for Oxygen Reduction

Replacing the rare and precious platinum (Pt) electrocatalysts with earth‐abundant materials for promoting the oxygen reduction reaction (ORR) at the cathode of fuel cells is of great interest in developing high‐performance sustainable energy devices. However, the challenging issues associated with non‐Pt materials are still their low intrinsic catalytic activity, limited active sites, and the poor mass transport properties. Recent advances in material sciences and nanotechnology enable rational design of new earth‐abundant materials with optimized composition and fine nanostructure, providing new opportunities for enhancing ORR performance at the molecular level. This Review highlights recent breakthroughs in engineering nanocatalysts based on the earth‐abundant materials for boosting ORR.     

Carbon-supported Pd-Co as cathode catalyst for APEMFCs and validation by DFT

Carbon supported PdCo catalysts in varying atomic ratios of Pd to Co, namely 1 : 1, 2 : 1 and 3 : 1, were prepared. The oxygen reduction reaction (ORR) was studied on commercial carbon-supported Pd and carbon-supported PdCo nanocatalysts in aqueous 0.1 M KOH solution with and without methanol. The structure, dispersion, electrochemical characterization and surface area of PdCo/C were determined by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM) and Cyclic Voltammetry (CV), respectively. The electrochemical activity for ORR was evaluated from Linear Sweep Voltammograms (LSV) obtained using a rotating ring disk electrode. The catalysts were evaluated for their electrocatalytic activity towards oxygen reduction reaction (ORR) in Alkaline Polymer Electrolyte Membrane Fuel Cells (APEMFCs). PdCo(3 : 1)/C gives higher performance (85 mW cm(-2)) than PdCo(1 : 1)/C, PdCo(2 : 1)/C and Pd/C. The maximum electrocatalytic activity for ORR in the presence of methanol was observed for PdCo(3 : 1)/C. First principles calculations within the framework of density functional theory were performed to understand the origin of its catalytic activity based on the energy of adsorption of an O(2) molecule on the cluster, structural variation and charge transfer mechanism.     

Metal–Organic Frameworks Based Electrocatalysts for the Oxygen Reduction Reaction

In view of the clean and sustainable energy, metal–organic frameworks (MOFs) based materials, including pristine MOFs, MOF composites, and their derivatives are emerging as unique electrocatalysts for oxygen reduction reaction (ORR). Thanks to their tunable compositions and diverse structures, efficient MOF‐based materials provide new opportunities to accelerate the sluggish ORR at the cathode in fuel cells and metal–air batteries. This Minireview first provides some introduction of ORR and MOFs, followed by the classification of MOF‐based electrocatalysts towards ORR. Recent breakthroughs in engineering MOF‐based ORR electrocatalysts are highlighted with an emphasis on synthesis strategy, component, morphology, structure, electrocatalytic performance, and reaction mechanism. Finally, some current challenges and future perspectives for MOF‐based ORR electrocatalysts are also discussed.     

Carbon Nanodots as Electrocatalysts towards the Oxygen Reduction Reaction

Electrocatalysts perform a key role in increasing efficiency of the oxygen reduction reaction (ORR) and as a result, efforts have been made by the scientific community to develop novel and cheap materials that have the capability to exhibit low ORR overpotentials and allow the reaction to occur via a 4 electron pathway, thereby mimicking as close as possible to traditionally utilised platinum. In that context, two different types of carbon nanodots (CNDs) with amide (CND‐CONH₂) and carboxylic (CND‐COOH) surface groups, have herein been fabricated and shown to exhibit excellent electrocatalytic activity towards the ORR in acid and basic media (0.1 M H₂SO₄ and 0.1 M KOH). CND surface modified carbon screen‐printed electrodes allow for a facile electrode modification and enabling the study of the CNDs electrocatalytic activity towards the ORR. CND‐COOH modified SPEs are found to exhibit improved ORR peak current and reduced overpotential by 21.9 % and 26.3 %, respectively compared to bare/unmodified SPEs. Additionally, 424 μg cm⁻² CND‐COOH modified SPEs in oxygenated 0.1 M KOH are found to facilitate the ORR via a near optimal 4 (3.8) electron ORR pathway. The CNDs also exhibited excellent long‐term stability and tolerance with no degradation being observed in the achievable current with the ORR current returning to the baseline level within 100 seconds of exposure to a 1.5 M solution of methanol. In summary, the CND‐COOH could be utilised as a cathodic electrode for PEMFCs offering greater stability than a commercial Pt electrode.     

A review of transition metal‐based bifunctional oxygen electrocatalysts

Electrochemical energy storage and conversion devices play a key role in the development of clean, sustainable, and efficient energy systems to meet the sustainable growth of our society. However, challenging issues including the sluggish kinetics of oxygen electrode reactions involving the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are present, limiting the implementation of devices such as metal‐air batteries, water electrolyzers, and regenerative fuel cells. In this review, various monometallic and bimetallic transition metal oxides (TMOs) and hydroxides are summarized in terms of their application for ORR/OER, in which the merits and demerits of various precious metal and carbon‐based metal oxide materials are discussed, with requirements for better electrocatalysts and catalyst support being introduced as well. Following this, different approaches to improve catalytic activity such as the introduction of doping and defects, the manipulation of crystal facets, and the engineering of supports, compositions, and morphologies are summarized in which TMOs with improved ORR/OER catalytic activities can be synthesized, further improving the speed, stability, and polarization of electrochemical energy storage and conversion devices. Finally, perspectives into the improvement of performance and the better understanding of ORR/OER mechanisms for bifunctional electrocatalysts using in situ spectroscopic techniques and density functional theory calculations are also discussed.     

Regulation of 2D Graphene Materials for Electrocatalysis

Benefiting from unique excellent physical and chemical characteristics, graphene has attracted widespread attention in the application of electrocatalysis. As a promising candidate, graphene is usually regulated with surface defects, heteroatoms, metal atoms and other active materials through covalent or non‐covalent bonds to substitute for noble metal catalysts, which has not been targeted in a report yet. In this review, we summarize the recent advances of approaches for engineering graphene‐based electrocatalysts and emphasize the corresponding electrocatalytic active sites in various electrocatalysis circumstances, such as electrocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), etc. The opportunities and challenges in the future development of graphene‐based catalysts are also discussed.     

Coordination Chemistry of [Co(acac)2] with N‐Doped Graphene: Implications for Oxygen Reduction Reaction Reactivity of Organometallic Co‐O4‐N Species

Hybridization of organometallic complexes with graphene‐based materials can give rise to enhanced catalytic performance. Understanding the chemical structures within hybrid materials is of primary importance. In this work, archetypical hybrid materials are synthesized by the reaction of an organometallic complex, [Co^II(acac)₂] (acac=acetylacetonate), with N‐doped graphene‐based materials at room temperature. Experimental characterization of the hybrid materials and theoretical calculations reveal that the organometallic cobalt‐containing species is coordinated to heterocyclic groups in N‐doped graphene as well as to its parental acac ligands. The hybrid material shows high electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media, and superior durability and methanol tolerance to a Pt/C catalyst. Based on the chemical structures and ORR experiments, the catalytically active species is identified as a Co‐O₄‐N structure.     

精确可控串联策略触发高效的氧还原活性

探索高效、经济的非金属氧还原(ORR)电催化剂已成为电化学能源体系的关键.科学界最具挑战性的目标之一是通过合理地验证和精确地调节活性位点来设计结构明确、性能优异的催化剂材料.本文提出一种精确和可控的串联协同作用的活性位点策略,以提高MFCOFs的ORR催化活性.以亚胺-N、噻吩-S和三嗪-N等作为结构单元,通过精确的串...     

Conversion of CuO Nanoplates into Porous Hybrid Cu2O/Polypyrrole Nanoflakes through a Pyrrole‐Induced Reductive Transformation Reaction

Porous hybrid Cu₂O/polypyrrole nanoflakes have been synthesized from solid CuO nanoplate templates through the pyrrole‐induced reductive transformation reaction at elevated temperature. The conversion mechanism involves the reductive transformation of CuO to Cu₂O and the in situ oxidative polymerization of pyrrole to polypyrrole. In addition, the morphology of the as‐converted nanohybrids depends on the shape of the CuO precursors. The strategy enables us to transform single‐crystalline CuO nanosheets into hollow hybrid Cu₂O/polypyrrole nanoframes. The ability to transform CuO and an organic monomer into porous hybrid materials of conducting polymer and Cu₂O with macrosized morphological retention opens up interesting possibilities to create novel nanostructures. Electrochemical examinations show that these porous hybrid Cu₂O/polypyrrole nanostructures exhibit efficient catalytic activity towards oxygen reduction reaction (ORR), excellent methanol tolerance ability, and catalytic stability in alkaline solution, thus making them promising nonprecious‐metal‐based catalysts for ORR in alkaline fuel cells and metal–air batteries.     

Electrocatalysis of oxygen reduction on multi-walled carbon nanotube supported copper and manganese phthalocyanines in alkaline media

Manganese phthalocyanine (MnPc) and copper phthalocyanine (CuPc)-modified electrodes were prepared using multi-walled carbon nanotubes (MWCNTs) as a support material. The catalyst materials were heat treated at four different temperatures to investigate the effect of pyrolysis on the oxygen reduction reaction (ORR) activity of these electrocatalysts. The MWCNT to metal phthalocyanine ratio was varied. Scanning electron microscopy (SEM) was employed to visualise the surface morphology of the electrodes and the x-ray photoelectron spectroscopic (XPS) study was carried out to analyse the surface composition of the most active catalyst materials. The ORR was studied in 0.1 M KOH solution employing the rotating disk electrode (RDE) method. Glassy carbon (GC) electrodes were modified with carbon nanotube-supported metal phthalocyanine catalysts using Tokuyama AS-4 ionomer. The RDE results revealed that the highest electrocatalytic activity for ORR was achieved upon heat treatment at 800 °C. CuPc-derived catalyst demonstrated lower catalytic activity as compared to the MnPc-derived counterpart, which is in good agreement with previous literature, whereas the activity of MnPc-based catalyst was higher than that reported earlier.     

Nitrogen‐Rich Manganese Oxynitrides with Enhanced Catalytic Activity in the Oxygen Reduction Reaction

The catalytic activity of manganese oxynitrides in the oxygen reduction reaction (ORR) was investigated in alkaline solutions to clarify the effect of the incorporated nitrogen atoms on the ORR activity. These oxynitrides, with rock‐salt‐like structures with different nitrogen contents, were synthesized by reacting MnO, Mn₂O₃, or MnO₂ with molten NaNH₂ at 240–280 °C. The anion contents and the Mn valence states were determined by combustion analysis, powder X‐ray diffraction, and X‐ray absorption near‐edge structure analysis. An increase in the nitrogen content of rock‐salt‐based manganese oxynitrides increases the valence of the manganese ions and reinforces the catalytic activity for the ORR in 1 m KOH solution. Nearly single‐electron occupancy of the antibonding e_g states and highly covalent Mn?N bonding thus enhance the ORR activity of nitrogen‐rich manganese oxynitrides.     

Computational investigation of O2 reduction and diffusion on 25% Sr-doped LaMnO3 cathodes in solid oxide fuel cells

The oxygen reduction reaction (ORR) and diffusion mechanisms on 25% Sr-doped LaMnO(3) (LSM) cathode materials as well as their kinetic behavior have been studied by using spin-polarized density functional theory (DFT) calculations. Bader charge and frequency analyses were carried out to identify the oxidation state of adsorbed oxygen species. DFT and molecular dynamics (MD) results show that the fast O(2) adsorption/reduction process via superoxide and peroxide intermediates is energetically favorable on the Mn site rather than on the Sr site. Furthermore, the higher adsorption energies on the Mn site of the (110) surface compared to those on the (100) surface imply that the former is more efficient for O(2) reduction. Significantly, we predict that oxygen vacancies enhance O(2) reduction kinetics and that the O-ion migration through the bulk is dominant over that on the surface of the LSM cathode.